Beruflich Dokumente
Kultur Dokumente
OBJECTIVE
To associate myself with an organization which gives me an opportunity to enhance my skills and
knowledge and take the best out of me in the field of Electrical Engineering.
EDUCATIONAL QUALIFICATION
EXPERIENCE:
TECHNICAL KNOWLEDGE:
WORK EXPERIENCE:
Nature of Work
Nature of Work
❖ Visiting of sites for Erection and commissioning of Hydro Turbine and Synchronous Generator
along with their BOP’s and Auxiliaries.
❖ Erection Supervising of Turbine, Generator, control panel, cable laying, termination and checking
of Pre-commissioning and commissioning checks and commissioning of Hydro Turbine Generator
unit.
SITE VISITED:
❖ Erection of Horizontal full Kaplan turbine inlet casing along with OGA and Runner chamber.
❖ Erection of turbine Rotating assembly.
❖ Control and power cable laying, glanding, termination and pre-commissioning checks of turbine
and generator and their auxiliaries and did the Mechanical spinning of one unit.
❖ Control and power cable laying, glanding, termination and pre-commissioning checks of turbine
and generator and their auxiliaries.
❖ 33KV switch yard equipment pre-commissioning checks were done.
❖ Checked the Pre- commissioning checks of 6.6/33kv switch yard equipments vize. Insulation
resistance of CT’s and PT’s, power transformer IR values and OLTC operation.
❖ Checked the pre-commissioning checks of TGPLC panel, Line Control Panel, LTAC panel, Battery
Charger panel and Excitation panel.
COUNTRIES VISITED:
❖ NEPAL AND VIETNAM for the purpose of erection and commissioning of Hydro Electric power
Plants.
❖ Erection and alignment of Guide vane apparatus assembly, spiral casing assembly, turbine Rotting
assembly and vertical synchronous generator.
❖ Erection of cooling water, generator LOS and Turbine OPU.
❖ Erection and Alignment Control Panels.
❖ Erection and alignment of 10.5/110kv switch yard equipments.
❖ Cable tray support fabrication fixing and cable tray placing.
❖ Power and control cables Laying, glanding and termination.
H & M Supplier : Kerala Electrical and Allied Enng. Co. Limited, Cochin.
TUNGA MHS is a Dam based power project of capacity 24 MW (1X4+2X10MW) situated near Tunga
dam Gajunur village, Shimoga.The Project was commissioned on june-2014. The Vertical full Kaplan
Turbine units are supplied by M/S. B.Fouress.Pvt Ltd, Bangalore, directly coupled to synchronous
generators, are supplied by U.C.M.Resita Romania.
Nature of Work
❖ Erection & Alignment of Draft Tube assembly, Runner chamber, Guide vane Assembly and Scroll
casing.
❖ Erection, alignment and commissioning of Full Kaplan Turbine, Synchronous Generator
(10MW and 4MW ) with auxiliaries like OPU, Cooling water system, high pressure oil supply and
air compressor system.
❖ Erection, Alignment and commissioning of 75/10T EOT carne.
❖ Erection and commissioning of 11/110 KV Switch Yard, 20MVA Power transformer, Generator
control panel, 11KV switch gear panel, 415V LTAC, 250KVA DG set.
❖ Recently we have dismantled and re-erected and commissioned the 2 no’s 10MW TG units.
Description:
RANGANATHA MHS is a cannel based power project of capacity 24.75 MW (3X8.25MW) situated near
Gagana-Chukki waterfalls at Shivanasamudram village, Kollegal thaluk, Chamarajanagara District.
Horizontal Francis Turbine units are supplied by M/S. B.Fouress.Pvt Ltd, Bangalore directly coupled to
synchronous generators supplied by U.C.M.Resita Romania.
Description:
SOMESWARA MHS is a run of river power project of capacity 24.75 MW (3X8.25MW) situated
downstream of Sri K Shesadri Iyer Power station at Shivanasamudram (Bluff) village, Malavalli thaluk,
Mandya District. Vertical full Kaplan Turbine units are supplied by M/S. B Foures Pvt Ltd, Bangalore
directly coupled to synchronous generators supplied by U.C.M.Resita Romania.
Nature of Work
❖ Operation and Maintenance of 8.25MW Vertical full Kaplan and Horizontal Francis
Turbine, synchronous Generators with Auxiliaries.
❖ Turbine generator control panels, 11KV and 66KV SF6 circuit breakers, 25/35MVA power
Transformer, Field instruments, 250KVA DG Sets, EOT crane and 11KV/66KV switch yard.
Nature of Work
Worked for period of one year in 66/11KV KPTCL Substation as “SHIFT ENGINEER” at
Dundanahalli Village, Maddur Thaluk, and Mandya District.
COMPUTER KNOWLEDGE
❖ Basics of Computer
PERSONAL DETAILS
Name : Yogesha.
Sex : Male
Marital Status : Married
Father’s name : Marigowda
Date of birth : 02nd may 1985
Languages known : English, Kannada, Hindi and Telgu.
Passport No. : L3547150
Extra activities : Reading Books.
DECLARATION
I hereby declare that all the above information and details are true to the best of my knowledge.
Place: Channapatna