Beruflich Dokumente
Kultur Dokumente
Australia
RAILWAYCIVILPLANTEQUIPMENT Postal Address: PO Box 200, Wamuran Queensland 4512
HIRE & SALES Australia
Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
K&G Machinery and Baidin GmbH can supply the K1000 Stationary
Flashbutt Welding machine (Details below) inclusive of operators at a
per weld rate for projects requiring a minimum of 5,000 total flashbutt
welds, the welding facility must be capable of supplying enough rail to
carry out a minimum of 50 welds per day.
Inclusions:
Supply and delivery of the K1000 factory welding system
Supply of 2No FBW Technicians to carry out the flashbutt welding of the
rail joints
Exclusions:
Installation of the K1000 FBW into the facility
Removal of the K1000 FBW at the completion of the contract
All other costs associated with the flashbutt welding facility including:
electricity usage, welding consumables, the preparation of short rails,
the grinding and testing of the LWR strings
Email: info@kandgmachinery.com.au
1
K AND G MACHINERY PTY LTD Street Address: 9 May Road, Wamuran, Queensland 4512
Australia
RAILWAYCIVILPLANTEQUIPMENT Postal Address: PO Box 200, Wamuran Queensland 4512
HIRE & SALES Australia
Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
BAIDIN GmbH offers stationary rail flash butt-welding plant K1000 (manufactured in 2003) after
renewal in December 2016. The K1000 rail-welding of MCO-8001 type is intended for continuous
flash-butt resistance welding of rails with cross-section from 4900 mm2 to 10 000 mm2 under
stationary conditions, with tin trimming immediately alter the welding is finished.
Manufactured machines are completed with equipment for welding rails according to
purchase -order. Two-sided current supply is used in the machine, providing low resistance
under short circuit as well as stable flashing.
For this purpose, the secondary tuned circuit parts are made of high-quality rolled copper,
bushing welding transformers arc brought closer to the welded joint as much as possible.
Welding process is executed in accordance with preset controller program.
The clamping and upsetting mechanisms arc hydraulically operated and supplied from the
pumping plant included in the delivery set.
Delivery set
1) Welding machine K1000.01.00.000 – 1;
2) Control cabinet ACT.171.00.0.000 – 1;
3) Pumping plant K-401-8 – 1;
4) Cooling plant BXTO-16 type – 1;
5) Spares, tools and accessories are as given in SPTA list (complete set) – 1;
6) Service forms and records are as given (complete set) – 1.
2
K AND G MACHINERY PTY LTD Street Address: 9 May Road, Wamuran, Queensland 4512
Australia
RAILWAYCIVILPLANTEQUIPMENT Postal Address: PO Box 200, Wamuran Queensland 4512
HIRE & SALES Australia
Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
Technical specifications
Parameter Value
Mains rated voltage, V 380
Frequency, Hz 50
Maximum short-circuit primary current, kA 2,2±0,2
Maximum short-circuit power consumption, kVA 800±80
Upset force at a pressure in hydraulic system of 16 daN 64000
Maximum cross section of welded rails, mm 2 10000
Pressure in the hydraulic system, daN 16
Pump station capacity, l/min, not below 60
Maximum clamping force at a pressure in hydraulic system of 15 MPa
160000
(150 kgf/cm2), daN
Maximum upset value, mm, 20±0,75
Displacement speed of the movable column relatively to the fixed one,
mm/s:
providing flash 0,2 to 6
providing upset, min 30
Maximum displacement of item to be weld in flash and upset (machine
100
stroke), mm
Vertical centering value of the welded
20±2
items', mm
Horizontal centering value of the welded
20±2
items', mm
Rated capacity at welding rails with cross section of 8,265 mm 2, joints
5
per hour
Cooling water flow at a pressure of 0,15 MPa (1,5 kgf/cm 2), l/min
through the welder jacket, not below 25
through the pump station jacket, not below 40
Weight, kg, max. 8450
Overall dimensions of welding machine with feeding rollers mm:
length, mm 5150
width, mm 1300
height, mm 2700
2. Moving column
Manufacture and replacement
2.1. Flash trimmer К1000.01.15.000 (limit stops, plates, blades, guides, cylinders)
2.2. Furnace lead К1000 03.00.200 (lower) … 600 (upper)
2.3. Gearbox of vertical travel
2.4. Replacement of bronze sleeves in the casings
2.5. Scraper 3-120
2.6. Scraper 3-120
2.7. Door cylinder
3
K AND G MACHINERY PTY LTD Street Address: 9 May Road, Wamuran, Queensland 4512
Australia
RAILWAYCIVILPLANTEQUIPMENT Postal Address: PO Box 200, Wamuran Queensland 4512
HIRE & SALES Australia
Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
3. Additional
Manufacture and replacement
3.1. Spacers К1000.02.00.008…008-01; 033…033-01
3.2. Centralizers К1000Б 05.00.000
3.3. Displacement encoder К1000А 01.02.000
3.4. Upset cylinders К1000. 01.01.000
3.5. Fabric-based laminate insulation (in sets)
3.6. Industrial rubber goods (in sets), including articles by Parker
3.7. Pressure gauges
3.8. Hydraulic components on the machine
3.9. Metalwear
3.10. Shafts
3.11. Door mechanisms
3.12. Fume offtake
3.13. Shims under spacers
3.14. High pressure sleeves assembly for the machine and SPAT
The control of welding machine devices and mechanisms in setting-up operation mode performed from the
keyboard.
The analog resistive measuring system used as the sensor of welding machine moving frame position.
4
K AND G MACHINERY PTY LTD Street Address: 9 May Road, Wamuran, Queensland 4512
Australia
RAILWAYCIVILPLANTEQUIPMENT Postal Address: PO Box 200, Wamuran Queensland 4512
HIRE & SALES Australia
Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
The pressure sensor used as the pressure sensor in the working ends of travel and upset cylinders.
Electrohydraulic tracking valve used as an actuator driving the travel of moving frame.
Direct control of welding machine performed by control unit of PLC in accordance with the software stored
in its memory and following the program of welding process transferred to it via communication link from the
industrial computer.
The industrial computer designed for programming of welding process and features of tolerance testing of
main parameters of the welding process, diagnostics and visualization of status of sensors, actuators and
mechanisms of the welding machine.
The implementation of the control system on base of high-reliable equipment of SIEMENS Company and
development of the software providing for highly user friendly interface between control devices and
operating personnel has allowed to create the presented control system for machines of butt induction rail
welding on the highest world first-class level; the control systems for a wide range of equipment of contact
electric welding can be arranged on base of this system.
5
K AND G MACHINERY PTY LTD Street Address: 9 May Road, Wamuran, Queensland 4512
Australia
RAILWAYCIVILPLANTEQUIPMENT Postal Address: PO Box 200, Wamuran Queensland 4512
HIRE & SALES Australia
Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
6
K AND G MACHINERY PTY LTD Street Address: 9 May Road, Wamuran, Queensland 4512
Australia
RAILWAYCIVILPLANTEQUIPMENT Postal Address: PO Box 200, Wamuran Queensland 4512
HIRE & SALES Australia
Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
7
K AND G MACHINERY PTY LTD
RAILWAYCIVILPLANTEQUIPMENT Street Address: 9 May Road, Wamuran, Queensland 4512 Australia
Postal Address: PO Box 200, Wamuran Queensland 4512 Australia
HIRE & SALES Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au
8
K AND G MACHINERY PTY LTD
RAILWAYCIVILPLANTEQUIPMENT Street Address: 9 May Road, Wamuran, Queensland 4512 Australia
Postal Address: PO Box 200, Wamuran Queensland 4512 Australia
HIRE & SALES Phone: 07 4943 6160
E-Mail: info@kandgmachinery.com.au
A.B.N 54 110 370 511 Web: www.kandgmachinery.com.au