Beruflich Dokumente
Kultur Dokumente
WORK/PURCHASE ORDER
Please supply the following Materials / Services subject to the conditions specified below
No Material Description / Work HSN/SAC Tax Rate Quantity Unit Rate Rs.
1 Breaking and removing existing tile / kota / marble flooring on 2400 Sq ft
floor with its mortar bedding till mother slab. Same to be
dispose from site premises. With satisfaction of EIC.
2 Providing and fixing of 18mm thk. granite on flooring as per 2400 SFT
approved sample in pattern as per detailed drawings in
cement paste in 1:3 (1unit cement and 3 units river sand) The
rate should be inclusive of surface preparation, cleaning joints
and grouting them with expandable grout of MYK LATICRETE
(make) or equivalent in matching colour to match shade of the
tile. Tile shall be free from any other colour & size variation.
(Cladding to have edges as per direction and approval of the
Architect; cladding works to be erected in proper plumb/line
and level(s) ; all cladding works to have the required quantity
of in-fill material(s), to ensure negation of any hollow spaces
within, after completion of works; any discrepancies, noticed
subsequent to completion of such works shall be rectified, as
per Architect's instructions, at the sole risk and responsibility of
the relevant contracting agency.) (Basic rate Rs.285/- per Sft)
3 P/F 6mm SS “T” profile of 304 grade finished in brush gold 175 RFT
finish laid in granite flooring as per the approved finish etc.
complete.
5 Providing and fixing in position Gypsum Board False Ceiling 2400 Sq.ft
as per manufacturer's specifications and instructions with 12
mm thick `Gypboard' Screw-fixed to the underside of
suspended G.I as per manufacturer's instructions and as per
specifications using Original Co. Specified Framework
Sections G.I.24 gauge The Gypboard should be fixed to G.I.
The `Gypboard ' to be used should be 12.5mm thick tapered
edge boards. The boards should be taped and filled from
underside to give smooth, seamless ceiling. The rate should
include necessary additional ceiling sections and intermediate
channels openings for light fixtures, vertical drops, offsets. etc.
Additional intermediate channels should be fixed to strap
hangers for additional support to prevent strap hangers from
buckling/swaying at every 1200 mm. Item to be completed in
all respector drilling machine with suitable attachment. Finally
the boards are to be jointed and finished so as to have a flush
look which includes filling as finishing the tapered and square
edges of the boards with jointing compound, paper tape and
framework for electrical fittings, A/C diffusers, and/or any other
cutouts, trap doors, wooden shadow battens (hollock wood,
black enamel painted - 25x40mm) at wall peripheries and
ends, etc complete including opening to be made for AC grills,
light fittings, trap door etc. (The quoted rate shall be inclusive
of suspenders at all heights. Measurements will be taken of
plan area only, cost to include of all profiles shapes and cut
outs of required sizes wherever mentioned by Engineer in
charge or Architect) Vertical panel made out of ply for AC Unit
supports at End and wherever required.
6 P/A of 3 coats of Luster paint of approved colour and shade to 2400 SFT
gypsum ceiling ghly sand papering surfaces to remove dust,
dirt etc. and repairing dents, cracks, holes with POP to achieve
level surface and finishing with two coats of primer, putty and
three coats of paint induding cost of material, labour,
scaffolding etc. all complete and as directed by the EIC. Rate
to indude application at all heights and levels, surfaces and
textures. EICs approval required after each coat. Samples to
be submitted to the EIC for approval."
7 Providing & Fixing Openable Trap Door Shutters for Access in 72 SFT
ceiling in19mm thk marine ply finished with egg white unicore
laminate on both sides, with brass hinges of 75 x 18 x 18mm,
on Sal wood framework etc. Complete.
Date : 31-Oct-19
9 Providing & fixing aluminium 'L' angle finished in anodized 200 RFT
section 50 x 50 in bronze shade on the edges of the barrisol
cut-outs to be Screws used for fixing to have flat heads and
finished in similar gold shade as per aluminium section. Etc.
complete
10 Providing & fixing aluminium 'L' angle finished in anodized 500 RFT
section 50 x 50 in bronze shade on the ceiling as shown in the
drawing, Screws to be used used for fixing to have flat heads
and finished in similar gold shade as per aluminium section.
Etc. complete
PO Notes
Project: Upgradation of GWZ.
Civil & ID works for GWZ common corridor. (Phase I)
scope of work includes.
1) Breaking of Existing flooring.
2) Fixing of New flooring.
3) Dismantling of old ceiling.
4) Fixing of new ceiling.