Beruflich Dokumente
Kultur Dokumente
SFH6731, SFH6732
www.vishay.com
Vishay Semiconductors
High Speed Optocoupler, Dual, 5 MBd
FEATURES
A1 1 8 VCC
• Data rate 5 MBits/s (2.5 MBit/s over temperature)
C1 2 7 VO1 • Buffer
• Isolation test voltage, 5300 VRMS
C2 3 6 VO2
• TTL, LSTTL, and CMOS compatible
A2 4 5 GND • Internal shield for very high common mode
i179075_1 transient immunity
V
i179075 D E • Wide supply voltage range (4.5 V to 15 V)
• Low input current (1.6 mA to 5 mA)
DESCRIPTION • Specified from - 40 °C to 85 °C
The dual channel 5 Mb/s SFH6731 and SFH6732 high • Material categorization: for definitions of compliance
speed optocoupler consists of a GaAlAs infrared emitting please see www.vishay.com/doc?99912
diode, optically coupled with an integrated photo detector.
The detector incorporates a Schmitt-Trigger stage for APPLICATIONS
improved noise immunity. A Faraday shield provides a
• Industrial control
common mode transient immunity of 1000 V/μs at
VCM = 50 V for SFH6731 and 500 V/μs at VCM = 300 V for • Replace pulse transformers
SFH6732. • Routine logic interfacing
The SFH6731 and SFH6732 uses an industry standard • Motion/power control
DIP-8 package. With standard lead bending, creepage • High speed line receiver
distance and clearance of ≥ 7 mm with lead bending options
• Microprocessor system interfaces
6, 7 and 9 ≥ 8 mm are achieved.
• Computer peripheral interfaces
AGENCY APPROVALS
• UL1577 (pending)
• DIN EN 60747-5-5 (VDE 0884) (pending)
• cUL
• CQC
ORDERING INFORMATION
S F H 6 7 3 # - X 0 # # T DIP-8 Option 7
SWITCHING CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
without peaking capacitor tPHL 120 ns
Propagation delay time to logic with peaking capacitor tPHL 115 300 ns
low output level without peaking capacitor tPLH 125 ns
with peaking capacitor tPLH 90 300 ns
Output rise time 10 % to 90 % tr 40 ns
Output fall time 90 % to 10 % tf 10 ns
Note
• 0 °C ≤ Tamb ≤ 85 °C; 4.5 V ≤ VCC ≤ 15 V; 1.6 mA ≤ IFon ≤ 5 mA; 0 mA ≤ IFoff ≤ 0.1 mA. Typical values: Tamb = 25 ° C; VCC = 5 V; IFon = 3 mA
unless otherwise specified
150 1.75
Ptot - Power dissipation (mW)
IF = 5 mA
VF - Forward Voltage (V)
120 1.70
Detector
100 1.65
75 1.60
50 1.55
Emitter
25 1.50
0 1.45
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_01 TA - Temperature (°C) isfh6731_03 TA - Temperature (°C)
Fig. 1 - Permissible Total Power Dissipation vs. Temperature Fig. 3 - Typical Forward Input Voltage vs. Temperature
10 5
VCC = 4.5 V
IF - Forward Current (mA)
TA = 25 °C 4 TA = 25 °C
1
3
IOH = 2.6 mA
2
0.100
1
IOL = 6.4 mA
0.010 0
1.3 1.4 1.5 1.6 1.7 0.0 0.2 0.4 0.6 0.8 1.0
Fig. 2 - Typical Input Diode Forward Current vs. Forward Voltage Fig. 4 - Typical Output Voltage vs. Forward Input Current
0.30
4.2 VCC = 5 V
ICCLat VCC = 15 V
0.25 IF = 0 mA
4.0
ICCH at VCC = 15 V and
Voltage (V)
ICCLat VCC = 5.5 V 0.20 IO = 16 mA
3.8
IO = 12.8 mA
0.15
3.6
IO = 9.6 mA
ICCH at VCC = 5.5 V
3.4 0.10
IO = 6.4 mA
3.2 0.05
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_05 TA - Temperature (°C) isfh6731_08 TA - Temperature (°C)
Fig. 5 - Typical Supply Current vs. Temperature Fig. 8 - Typical Low Level Output Voltage vs. Temperature
1100 0
VCC = 4.5 V
1000 -1
IOH - High Level Output
IOHH - Output Leakage
VOH = 2.7 V IF = 5 mA
VCC = VO = 15 V -2
900
Current (nA)
Current (mA)
-3
800
-4
700
-5 VOH = 2.4 V
600 VCC = VO = 5.5 V
-6
500 -7
400 -8
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_06 TA - Temperature (°C) isfh6731_09 TA - Temperature (°C)
Fig. 6 - Typical Output Leakage Current vs. Temperature Fig. 9 - Typical High Level Output Current vs. Temperature
40 60
VCC = 5 V 54 VCC = 5 V
38
tR ,tF - Rise, Fall Time (ns)
IOL - Low Level Output
IF = 0 mA 48 CL = 15 pF
35
42
Current (mA)
33 36
VOL = 0.8 V
30 30
tR
28 24
VOL = 0.6 V
18
25
12
23 tF
VOL = 0.4 V 6
20 0
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_07 TA - Temperature (°C) isfh6731_10 TA - Temperature (°C)
Fig. 7 - Typical Low Level Output Current vs. Temperature Fig. 10 - Rise and Fall Time vs. Ambient Temperature
150 170
VCC = 5 V
tPLH - Propagation Delay (ns)
VCC = 5 V IF = 1.6 mA
70 50
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_11 TA -Temperature (°C) isfh6731_14 TA - Temperature (°C)
Fig. 11 - Typical Propagation Delays to Logic High vs. Temperature Fig. 14 - Typical Propagation Delays to Logic Low vs.Temperature
180
VCC = 15 V
tPHL - Propagation Delay (ns)
60 50
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_12 TA - Temperature (°C) isfh6731_15 TA - Temperature (°C)
Fig. 12 - Typical Propagation Delays to Logic Low vs.Temperature Fig. 15 - Typical Propagation Delays to Logic High vs. Temperature
100 170
VCC = 15 V
tPHL - Propagationn Delay (ns)
tPLH - Propagation Delay (ns)
VCC = 5 V
150 C1 = 15 pF (without
90 C1 = 120 pF (without
peaking capacitor) peaking capacitor)
130
80
IF = 5 mA
IF = 1.6, 3 and 5 mA 110 IF = 3 mA
70
90
IF = 1.6 mA
60
70
50 50
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_13 TA - Temperature (°C) isfh6731_16 TA - Temperature (°C)
Fig. 13 - Typical Propagation Delays to Logic High vs. Temperature Fig. 16 - Typical Propagation Delays to Logic Low vs.Temperature
80 180
tPLH - Propagation Delay (ns)
40 80 IF = 1.6 mA
30 60
- 60 - 40 - 20 0 20 40 60 80 100 - 60 - 40 - 20 0 20 40 60 80 100
isfh6731_17 TA - Temperature (°C) isfh6731_18 TA - Temperature (°C)
Fig. 17 - Typical Propagation Delays to Logic High vs. Temperature Fig. 18 - Typical Propagation Delays to Logic Low vs.Temperature
VCC 5V
R3 = 619 Ω
tPLH tPHL
R1 C1 = 120 pF C2 = 15 pF R2 = 5 kΩ
The Probe and Jig Capacitances are included in C1 and C2 All diodes are 1N916 or 1N3064
VCC
400 V/50 V
A VCM
1 VCC 8 0V
Output VO
R B monitoring
2 7 node Switch at A: IF = 1.6 mA
0.1 µF VOH
3 6 bypass VO (min.)
4 5 Output VO
Gnd
VO (max.)
VOL
+ –
Switch at B: IF = 0 mA
Pulse generator VCM
isfh6731_20
Fig. 20 - Test Circuit for Common Mode Transient Immunity and Typical Waveforms
3.10 ± 0.25
9.75 ± 0.15 6.70 ± 0.15
0.95 ± 0.20
3.55 ± 0.20
6.00 ± 0.25
0.70 ± 0.20
1.27 ± 0.10
0.50 ± 0.10
2.54 nom. 10
7° typ. 0.25 ± 0.
3 x 2.54 = 7.62
8 7 6 5
1 2 3 4 22672
1.27 ± 0.10
8 7 6 5
1 2 3 4 22673
0.70 ± 0.20
3.55 ± 0.20
0.25 ± 0.10
8.00 min.
8.40 min.
1.27 ± 0.10 0.75 ± 0.25
2.54 nom. Leads
Coplanarity
3 x 2.54 = 7.62 0.10 max.
8 7 6 5
1 2 3 4
PIN ONE I.D.
22674
V YWW 68
Notes
• The VDE logo is only marked on option 1 parts
• Tape and reel suffix (T) is not part of the package marking
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.