Beruflich Dokumente
Kultur Dokumente
Bulletin: J100.07
Reflex & Transparent Gages Date: 10/2017
For Pressures Up to
300# ANSI
Series 300L
Features
• Recessed Gasket Seat in Chamber and Cover
• 25mm Glass, Size 11-20
• Economical 300# ANSI Gage
• Tempered Borosilicate Glass
• Wetted parts conform to NACE MR0175 & MR0103
• All parts listed in ASTM or ASME B31.3
• All Gages feature a continuous, one-piece chamber regardless of length
Reflex
R-300L The Series 300L gage is an economical gage with increased visible
ranges per gage section. This gage series uses the proprietary Jerguson
25mm glass, which is thinner, narrower and longer than traditional gage
glass. The Series 300L features a recessed gasket surface, barstock non-
shrouded covers and ASTM grade bolting. Due to the length of each gage
Transparent section this model is not recommended for high pressure steam service.
T-300L Refer to page 24 for Non-Frost Extensions, page 28 for Illuminators,
page 25 for Support Brackets, and page 7 for Mica Shields.
Specification
Materials of Construction Shields Gage Code for Jerguson Gages
• Borosilicate Glass Shields are used to protect
• Gaskets the glass from chemical attack. Special Features
– IFG® -5500 Standard Two shields are available: M = Mica Shield
(Seal/Cushion) Mica and PCTFE. K = PCTFE (Kel-F) Shield
– Graphite, with .002" (.05mm) Mica: Mica shields are used to F = Non-frosting
stainless steelreinforcement protect the glass from Glass Size H = External Heating
layer corrosion in high pressure Series 300L: E = Electrical Heating
– Teflon® steam (over 300WSP) and 11, 12, 13, T = Internal Heating
– Other Materials Available caustic applications (pH >11). 15, 18, 20 CH = Close Hook-up
Chamber PCTFE: PCTFE shields (formerly Other Series: (Side or Back Conns.)
• Carbon Steel known as Kel-F®) are primarily W = Weld Pad
1 thru 9
used in Hydrofluoric Acid
– To -20°F (-28°C) IW = Isolable Weld Pad
service. Note that the PCTFE
• Low Temp Carbon Steel shield also serves as the sealing
– To -50°F (-45°C) gasket; no additional
– Charpy Impact Tested sealing
– B7M Bolts / 2HM Nuts gasket is
required.
27-RFCH-20
• Stainless Steel PCTFE
– To -325°F (-198°C) Mica Number Series
– Dual Rated 316/316L of Sections 20, 32, 300L
• All Acceptable for NACE Service L10, 40, 51
16633 Foltz Parkway • Strongsville, OH 44149 USA • Phone 440.572.1500 www.Jerguson.com • JergusonApp@clark-reliance.com