Beruflich Dokumente
Kultur Dokumente
CLARIS® Series
Filter Cartridges
Performance Specifications
Filter Grades:
1, 3, 5, 10, 20, 30, 50, 75 µm
Maximum Differential Pressure:
50 psid (3.45 bar) @ ambient
25 psid (1.72 bar) @ 140˚F (60˚C)
Recommended Change Out Differential Pressure1:
35 psid (2.4 bar)
FDA Listed Materials:
Manufactured from materials, which are listed for food contact Dimensions (nominal):
applications in Title 21 of the U.S. Code of Federal Regulations. Outside Diameter: 2 1⁄2" (6.4 cm)
Product in compliance with EU Directive 2002/72/EC for plastic Inside Diameter: 1" (2.7 cm)
in food contact (in simulants A, B, C and D). Lengths: 9 3⁄4" (24.8 cm), 9 7⁄8" (25.1 cm),
10" (25.4 cm), 19 1⁄2" (49.5 cm),
Toxicity: 19 4⁄5" (50.3 cm), 20" (50.8 cm),
All polypropylene components meet the specifications for 29 1⁄4" (74.3 cm), 29 1⁄2" (74.9 cm),
biological safety as per the USP for Class VI-121˚C plastics 29 3⁄4" (75.6 cm), 30" (76.2 cm),
(gaskets/O-rings excluded). 39" (99.1 cm), 40" (102 cm),
Purity: 50" (127 cm)
Claris Series filter cartridges are free of surfactants,
anti-static agents, binders, and adhesives.
Product Specifications
Materials of Construction: COMPONENT
Filter Media: Polypropylene This Claris Series filter cartridge is tested
End Caps2: Polypropylene and Certified by NSF International
under ANSI/NSF Standard 42 for mate-
Extended Core 2 : Stainless Steel rials only.
m
5 µm
10 µ
µm
.4
20
.35
Differential Pressure (psid)
.3 30 µm .02
.25 50 µm
.2
.15 .01
.1
.05
0 0
1 2 3 4 5 6 7 8 9 10
Flow Rate (gpm), Water at 68°F (20°C)
Flow rate is per 10" (25.4 cm) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP).
© Copyright 2005, Pall Corporation. Pall, and Claris are trademarks of Pall Corporation. ® Indicates a Pall
trademark registered in the USA. is a service mark of Pall Corporation.