Sie sind auf Seite 1von 2

M117 FLANGER

92503004231revD
M117 FLANGER
DESCRIPTION POWER DIRECTIONS SPECIFICATIONS 
• A staple of funky ’70s sounds, The MXR Flanger is powered • Run a cable from your guitar to • Rotate the WIDTH control Input Impedance 470 kΩ
from jet plane to space effects by two 9-volt batteries (remove the Flanger’s INPUT jack and run clockwise to increase the Output Impedance 1 kΩ
• Numerous tweakable bottom plate to install), an 18-volt another cable from the Flanger’s intensity of the time delay as Max Input Level 5 dBV
parameters AC adapter such as the Dunlop OUTPUT jack to your amplifier. set by the SPEED control or Max Output Level 5 dBV
ECB004/ECB004E, or a DC Brick™ • Start with all controls at counterclockwise to decrease it.
• Does the work of a flanger, power supply. Noise Floor* -98 dBV
12 o’clock. • Rotate the SPEED knob
chorus, delay and more Noise Reduction 2:1 ratio
• Turn the effect on by depressing clockwise for a faster phase
effect or counterclockwise Max Delay 12.8 ms
the footswitch.
for a slower phase effect. Rate Range 0.1 Hz to 10 Hz
• Rotate the MANUAL control
clockwise to emphasize higher • Rotate the REGEN. control Current Draw 39 mA
frequencies or counterclockwise clockwise to increase the Power Supply 18 volts DC
to emphasize lower frequencies. overall intensity of the effect or *A-weighted
CONTROLS
counterclockwise to decrease it.
1 MANUAL knob controls the
degree of phase shifting
2 WIDTH knob controls the
intensity of the time delay
set by SPEED knob
3 SPEED knob controls the
speed of time delay SAMPLE SETTINGS
4 REGEN. knob controls the
intensity of the overall effect
5 FOOTSWITCH toggles MAY GALLOP CHAINED EDDIE GENIUS OF
effect on/bypass (blue FLANGE
LED indicates on)

DUNLOP MANUFACTURING, INC.


P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658

Das könnte Ihnen auch gefallen