Beruflich Dokumente
Kultur Dokumente
VLAN:-
For Create Vlan :-
Fiberlink#
Fiberlink#conf t
Fiberlink(config)#vlan 550
Fiberlink(config-if-vlan)#
Fiberlink(config-if-vlan)#ex
Fiberlink(config)#end
Flex-Link Configuration :-
Maipu#en
Maipu#conf t
Maipu(conf t)#int Ethernet 0/1/1
Fiberlink(config-if-ethernet-0/1/1)#switchport backup interface ethernet 0/1/2
Fiberlink(config-if-ethernet-0/1/1)#end
Note :- NO configuration has required master port .(Etherenet 0/1/1) already this port is going to forwarding, and
ethernet 0/1/2 Is blocking backup Port.
1.1.3 hostname
Command: hostname <hostname>
no hostname
Function: Set the prompt in the switch command line interface. The no operation cancels the
configuration.
Parameter: <hostname> is the string for the prompt, up to 30 characters are allowed.
Command mode: Global Mode
Default: The default prompt is relatived with the switch.
Usage Guide: With this command, the user can set the CLI prompt of the switch according to their
own requirements.
Example: Set the prompt to “Test”.
Switch(config)#hostname Test
Test(config)#