Beruflich Dokumente
Kultur Dokumente
Q.4 Give the different Standard size of Drawing Board with designation.
Q.5 Give the Name of Indian standard used for deciding Drawing Board's Size.
Q.8 Circle up to _______ mm diameter can be drawn with the legs of the compass kept straight.
Q.9 Circle more than ______ mm radius are drawn with the aid of the lengthening bar.
Q.12 Write down the use of (1) Protector (2) Compass (3) T-Square.
Q.13 Give the different Standard size of Drawing Paper (draiwng sheet).
(2) The final fair work may be done with ______ pencil.
(3) Lead Pencils Having the Different Lead sizes of _____mm & _____ mm.
(5) Roll N Draw Scale consists of Graduated roller, a scale of ______ mm & a _______.
Q.15 Write down the advantages while using Drafting Machine for Engineering Drawing.
Perfext College of Training &Education
Q.4 The Margin Required on Left side of drawing sheet for filing purpose is_____ mm.
Q.5 List out the details which are required to write in Title block.
Q.6 How we can write the Drawing Sheet No. if the sheet we draw the sheet no.5 from total 12.
Q.9 which type of Machine Drawing is for the component having same shape but different
dimensions?
Q.10 Grid Reference system is drawn on the sheet for _________ on the drawing.
Q.1 which standard is used for describing the various types of Lines?
Q.2 Which Grade of pencil is used for drawing of Centre lines & Section lines?
Q.3 To Draw an outlines, dotted lines, section-plane lines, dimension lines & arrow heads ______
grade pencil is used.
Q.6 In centre line the long dashes are about ______ to _____ mm.
Q.7 Draw one drawing which shows the application of all the lines.
Q.8 The thickness of the line of the letter should be such that it is obtained in __________ storke of
the pencil in single stroke letter.
(3) Leader
Q.10 The Length of the arrow head should be about ______ times to its maximum width.
Q.11 Write down the name of two systems for placing the Dimension.
Unit: 4-Scale.
Assignment No: 4