Beruflich Dokumente
Kultur Dokumente
STANDARD OPERATING
PROCEDURE
FOR
WET PRESERVATION
List of Contents
1. Objective
2. Scope
3. Responsibility
4. Safety Ppe’s
5. Safety Precaution During operation
6. System description
7. Pre startup check
8. Operating Procedure
9. Abbreviations / Notations
References
1. Objective:
This SOP is for Smooth Operation of Wet preservation of boiler.
2. Scope:
This SOP is applicable for Wet preservation of boiler.
3. Responsibility :
Unit Control Engineer, Field Engineer and Desk Engineer
4. Safety PPE’s:
Ear Plugs, Safety Goggles, Hand Gloves, etc.
6. System Description
The Boiler is a once thro supercritical boiler. The BMCR for the
boiler is 2322tph at 25.12mpa SH outlet pressure. It is a full
suspended Π--type once-through boiler with the supercritical
pressure, primary intermediate reheating, single furnace
balanced ventilation, semi-enclosed arrangement, dry bottom.
The approximate quantity of volume in 816cum of each circuit.
When there is extended shutdown of boiler, the boiler tubes are
to protected against atmospheric corrosion. These are
accomplished by preventing direct atmospheric air contact with
tube surface and maintains proper water chemistry.
Prestart Up Checks
9. Abbreviations / Notations
References
1. L&T O & M manual
2. Boiler and feed water & P & I Drawing