Beruflich Dokumente
Kultur Dokumente
Compatibility
Electronic Addressing - The Signature
Signature Series Call Points are compatible only with Signature Loop loop controller electronically addresses
Controller. each Call Point, saving valuable time
during system commissioning. Setting
complicated switches or dials is not
Testing & Maintenance required. Each Call Point has its own unique serial number stored
in its “on-board memory”. The loop controller identifies each device
To test the Call Point simply insert the special test key (provided with
on the loop and assigns a “soft” address to each serial number. If
every unit); the glass drops and the switch closes. Removing the key
desired, the Call Points can be addressed using the SIGA-PRO Signa-
restores the Call Point to normal.
ture Program/Service Tool.
The Call Point’s automatic self-diagnosis identifies when it is defec-
tive and causes a trouble message. The user-friendly maintenance
program shows the current state of each Signature Series device
and other pertinent messages. Single devices may be deactivated
Warnings & Cautions
temporarily, from the control panel. Availability of some mainte- This device will not operate without electrical power. As fires fre-
nance features is dependent on the fire alarm system used. quently cause power interruption, we suggest you discuss further
safeguards with your fire protection specialist.
Scheduled maintenance (Regular or Selected) for proper system op-
eration should be planned to meet the requirements of the Author-
ity Having Jurisdiction (AHJ).
Dimensions
27.5 mm 32 mm
89 mm (3.5 in) (1.1 in) (1.3 in)
Testing & Maintenance
To test the Call Point simply insert the
special test key (provided with every unit);
the glass drops and the switch closes.
93 mm (3.7 in)
RED
DATA IN/OUT (+)
BLACK B/W
DATA IN (-) DATA OUT (-)
From Signature Controller
or Previous Device
1
B/W
Black Wire Wire Red Wire
Black Red
Wire Wire
B/W
Wire
Latin America
T 305 593 4301
F 305 593 4300
www.gesecurity.com
imagination at work
Data Sheet 85001-0349 Issue 2
Not to be used for installation purposes. Page of 4