Beruflich Dokumente
Kultur Dokumente
1.0
I- Type of publication
II-
II- Product
III-
III- Introduction
Use this troubleshooting guide if your contactor is noisier than others contactors located in the same
area.
Tools required:
- A controller to check voltage
- A screw driver
Page 1/3
R027
1.0
IV-
IV- Description
MY CONTACTOR
IS NOISY
Do you check
NO UNDER VOLTAGE CAN GENERATE NOISY COIL
your coil
voltage? (1)
YES
Is the
contactor in YES ISOLATE YOUR CONTACTOR FROM DUST
dust area ?
NO
Did you do
YES PROTECT YOUR CONTACTOR FROM
commissioning
OUTSIDE POLLUTION
around your
contactor ?
NO
Do you check
NO
your contactor SEE TECHNICAL INFORMATION (2)
position ?
YES
CONTACT TECHNICAL
SUPPORT
Page 2/3
R027
1.0
Note: you can make the same job for a TeSysF but the multi meter is not connected on the same points:
Page 3/3