Beruflich Dokumente
Kultur Dokumente
(https://www.ase-systems.com)
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
powerful and exible tool for testing and maintaining SCADA RTU and SCADA
Find out for yourself how easy the ASE2000 Version 2 Test Set is to use and all
systems.com/downloads/ase2000-trial-datasheet.pdf) today!
REQUEST TRIAL »
(HTTPS://WWW.ASE-
SYSTEMS.COM/DOWNLOADS/
ASE2000-TRIAL-
DATASHEET.PDF)
/
OVERVIEW HARDWARE| CONFIGURATION
Home (https://www.ase-systems.com/) | Register &Product
Login (/login/) FEATURES SPECIFICATIONS | Request Quote
DOWNLOADS
(/registration-product/)
(https://www.ase-systems.com)
ASE’s protocol and communication test products, rst introduced in 1989, are currently in use worldwide by
RTU and IED equipment manufacturers, electric power utilities, and SCADA system vendors. The ASE2000 RTU
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
Older widely used protocols such as:
All protocols are supported in a single program with a single user interface. The ASE2000 provides a total
solution approach to the area of protocol test equipment software and its family of PC based protocol test
equipment that includes USB serial communication hardware and Bell-202 modems.
ASE2000 Version 1 was rst introduced in 1999 (replacing older Comm/32 and Comm/64 models) and has a
current installed base of several thousand units in numerous utilities and SCADA industry companies
worldwide.
/
ASE2000
Home (https://www.ase-systems.com/) | Login
Version 2, introduced in September, 2011,
(/login/) | Register
expands on Version 1 features
Product (/registration-product/) | RequestinQuote
by supporting operation
Exchange and
(/request-a-quote/) | modes.
Task ContactExchange mode implements Version 1 features and operation. Task mode, new in
Us (/contact-us/)
Version 2, adds a simpli ed means to performing a set of common tasks such as device initialization, data
(https://www.ase-systems.com)
acquisition, controls, and le transfers. Task Mode operation requires only that the user select a RTU/IED device
and a task to be performed. Communication message editing, frequently required in Version 1, is automated in
Products
Version 2. (Https://Www.Ase-Systems.Com/Products/) Services
ASE2000 Version 2
Support & Downloads (Https://Www.Ase-Systems.Com/Support/)
The ASE2000 RTU Test Set is a full-featured protocol test unit that provides the user with a powerful and exible
tool for testing and maintaining SCADA RTU and SCADA IED equipment and diagnosing communication
problems.
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
User Interface
ASE2000 operation is a menu driven, window oriented interface, developed in line with standard Windows
interface presentation guidelines. Set-up screens allow the user to de ne test session speci c information and
user preference information. For quick-start operation, the supplied default values for most test operations are
su cient and preclude the need for lengthy and complicated pre-test set-up. For tests that do require special
conditions, a set of intuitive and easy to use set-up screens is provided. Special set-up conditions can be saved
to uniquely named les and easily retrieved for use in future sessions. Many users develop a library of
frequently used test scenarios with this feature thereby eliminating repetitive set-up for future test sessions.
Display Options
Display screens provide dynamic data display during monitoring and simulation mode test sessions.
/
Home (https://www.ase-systems.com/)
Users | Login
are not limited to a single display (/login/)
format | Register
for message data.Product message data can|beRequest Quote
(/registration-product/)
In addition,
displayed in|Interpretive
(/request-a-quote/) Contact Mode which identi
Us (/contact-us/) es, in English, the various message elements and their
values, Raw Data Mode which displays only the numeric message data, or both. Point data is available for
presentation in tabular format.
(https://www.ase-systems.com)
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
The Line Monitoring view in Versions 1 and 2 shows communication line data in raw and interpretive
styles. Clicking on a eld or value in one side highlights the corresponding eld in other side.
/
Home (https://www.ase-systems.com/)
The | Login
Messages View in Version 2 presents (/login/) | Register
communication Product
line data in an (/registration-product/)
alternate format with | Request
“zoom-in” Quote
details
(/request-a-quote/) | Contact Us (/contact-us/)
(https://www.ase-systems.com)
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
The Point Values View in Versions 1 and 2 shows point names, values (raw and scaled), quality codes, and
times
The ASE2000 test set has three modes of operation, Master Simulation (communicating to a downstream device
or RTU), RTU Simulation (communicating to a master station), and Line Monitor (listening to communications
Master Simulation Mode provides the capability to issue data scan requests and supervisory control commands
to one or more RTU’s on a communication line. The set-up screens for this mode allow the user to de ne a test
scenario that identi es which device(s) to communicate with, which commands to issue for each device,
/
RTU Simulation
Home Mode allows the user|tocon
(https://www.ase-systems.com/) gure
Login (/login/) | Register
the ASE2000 RTUProduct
test set(/registration-product/)
as one or more RTU’s | respond
to to
Request Quote
(/request-a-quote/) | and
data scan requests supervisory
Contact control commands.
Us (/contact-us/) Convenient set-up menus allow the user to specify
point types, number of points, and point ordering that will result in the proper data message structure. Point
(https://www.ase-systems.com)
modeling can also be enabled to provide data value changes on successive data scans.
Line Monitoring Mode is used to monitor communication between a master station and all RTU/IED devices on
Products (Https://Www.Ase-Systems.Com/Products/) Services
a communication line. Message data for both directions is shown.
ASE2000 Version 2 adds Task Mode. In this mode, the ASE2000 operates from a user de ned RTU/IED device
data base. Each de nition includes counts and address of all input points at that device.
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
Task Mode/Master Simulation provides the user with a set of tasks applicable to the protocol of the selected
device. Activating a task causes appropriate messages to be built and transmitted to accomplish the selected
/
Task Mode/RTU
Home Simulation allows individual
(https://www.ase-systems.com/) | Loginpoints states/values
(/login/) to Product
| Register be entered from the Point Values
(/registration-product/) view. New
| Request Quote
Advanced
Support Features(Https://Www.Ase-Systems.Com/Support/)
& Downloads
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
Event Logging generates a text le recording signi cant events including:
– Communication errors
– Online communication can be triggered to stop when a selected event is detected, thereby creating a record
Signal Analysis is available to users with an ASE supplied communication device (BCOM-USB) and provides a
DNP3 Certi cation testing support les are included with the ASE2000 Version 2 software at no additional
charge. An automated test results report can be generated through standard browser.
4 If the DUT’s reply contains more than 249 octets then verify Pass
Support & Downloads
that the (Https://Www.Ase-Systems.Com/Support/)
rst response message sets the FIR bit to a one, the
FIN bit is set to zero.
5 Verify subsequent messages to assure that the FIR bit is zero, Pass
the FIN bit is zero, and the sequence number increments by
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
one.
6 Verify that the last message has the FIR bit is zero and the FIN Pass
bit is one, signifying the last data fragment, and the SEQ value
increments by one.
7 If the DUT’s reply contains less than 250 octets in the Data Link Pass
Frame then the FIR bit is set to one and the FIN bit is also set to
one.
/
Copyright © 2019 Kalki Communication
Home (https://www.ase-systems.com/)
Technologies
| Login (/login/) Private
| Register Limited | All Rights Reserved
Product (/registration-product/) | Request Quote
(https://www.ase-systems.com)
About Us (Https://Www.Ase-Systems.Com/About-Us-3/)
/