Beruflich Dokumente
Kultur Dokumente
“ Quote
could be
placed
here.”
Understanding your needs.
Understanding Ramor steel.
Protect Thickness
product range* (mm)
EN 1522
Protection level Threat Velocity (m/s) Range (m) Ramor 500 (mm) Ramor 550 (mm)
NIJ 0108.01
Protection level Threat Velocity (m/s) Range (m) Ramor 500 (mm) Ramor 550 (mm)
VPAM PM 2007
Protection level Threat Velocity (m/s) Range (m) Ramor 500 (mm) Ramor 550 (mm)
GOST R
Protection level Threat Velocity (m/s) Range (m) Ramor 500 (mm) Ramor 550 (mm)
”All statements as to the properties and utilization of materials and products mentioned in this sheet are for the purpose of description only.
Guarantees in respect of existence of certain properties or utilization of material mentioned are valid only if agreed upon writing.
This version is only valid until a new version is available, SSAB reserve the right to not inform when a new version is available and valid”
Ramor Workshop
Recommendations
Yield strength Tensile Strength Elongation Hardness Impact strength all directions
Ramor
Re MPa Rm MPa A5 % HBW t °C Chapy V J
300
Bending Force, F tones / 1000 mm
250
Ramor 500
200 R=6xt. W/t=16
150
100
Ramor 500
R=6xt. W/t=20
50
0
3 4 5 6 7 8 9 10 11 12 13 14 15
Plate thickness mm
38
36
R
Degrees of springback
34
32 Ramor 550
t
30 6 mm
Ramor 500
28
6.5 mm
26
24 W
22
Ramor 450
8 mm
20
R = minimum bending radius
18
t = plate thickness
16
W = die opening width (mm)
14 15 16 17 18 19 20 21 22
W/t
GMAW, solid wire EN 12072 G 18 8 Mn AWS 5.9 ER307 OK Autrod 16.95 Austenitic
GMAW, Solid wire EN 440 G3Si1 AWS A5.18 ER70S-6 OK Autrod 12.51 Ferritic
Plate thickness mm
10 20 30
* Special tolerance by separate agreement only. Typical plate thickness is middle of 0 mm and upper tolerance.
SSAB is a Nordic and US-based steel company. SSAB offers
SSAB
SE-613 80 Oxelösund
Sweden
T +46 155-25 40 00
F +46 155-25 40 73
ramor@ssab.com
www.ssab.com