Beruflich Dokumente
Kultur Dokumente
Course Outcome
ASSIGNMENT -1
Course Outcome
ASSIGNMENT -2
Question: Provide a suitable diagram for Impedance coupling and say how
shielding design can be improved
P.S.N.A College of Engineering and Technology, Dindigul-624 622
Department of ECE
Course Outcome
ASSIGNMENT -3
Question: List out the suitable filters for mitigating effect produced by improper
shielding
P.S.N.A College of Engineering and Technology, Dindigul-624 622
Department of ECE
Course Outcome
ASSIGNMENT -4
Question: Specify a suitable standard for Radio Interference and explain its
methods involved
P.S.N.A College of Engineering and Technology, Dindigul-624 622
Department of ECE
Course Outcome
ASSIGNMENT -5
Technical standards
There are several basic differences between a power line filter and
a communication circuit filter.
The input impedance of a power line filter almost never achieves an
impedance match with the impedance of its associated power line
because of load changing.
For this reason, interference level at the filter output increases,
instead of being suppressed. On the other hand, a transmitter
harmonic filter is generally designed to provide an impedance match
to the transmitter output over the fundamental frequency range.
Another basic difference between power line filters and
communication filters is that power line filters are strongly biased
by the power line current.
The interferences appearing in power lines have two components:
common-mode (CM) and differential-mode (DM).
Common-Mode Filter :
Differential-Mode Filter: