Beruflich Dokumente
Kultur Dokumente
1. TEST
TEST CONDITION
1) Normal temperature of the whole system
- Coolant : Approx 80˚C (176˚F)
- Hydraulic oil : 45 Ü 5˚C (113 Ü 10˚F)
- Transmission oil : 75 Ü 5˚C (167 Ü 10˚F)
2) Normal operating pressure : See page 6-77, 79.
2. SPECIFICATION
SPECIFICATION
Engine speed, rpm
High idle High idle Hyd stall Hyd stall
Low idle Converter stall Full stall
(backhoe) (loader) (backhoe) (loader)
2300Ü50 2400Ü50 1000Ü50 2250Ü70 2300Ü70 2020Ü70 1640Ü100
3. ENGINE
ENGINE RPM CHECK
Remark : If the checked data is not normal, it indicates that the related system is not working properly.
Therefore, it is required to check the related system pressure : See page 6-77, 79.
1) Hydraulic stall rpm (loader / backhoe)
- Start the engine and raise the bucket
approx 45 cm (1.5 ft) as the figure.
- Press the accelerator pedal fully and
45cm
2-8