Sie sind auf Seite 1von 16

FREE STRUCTURAL SOFTWARE

This document is only for information regarding the softwares used in Civil Eng. Industry. All are requested
to use this information for legal purpose only. And I am not responsible for any illegal activities from
your part.

Website Details are also attached: Contact them for further details.

Following Spreadsheets are from http://www.structural-engineering.fsnet.co.uk/

Free structural software? Is there such a * Some software may require registration after an evaluation period.
Read the software documentation for details.
thing? It is just knowing where to look.
There are quite a few places now to If you know of any software that falls into the description on the
obtain software. This page contains left, please e-mail me with details and I will post it up.
information on where to obtain free
programs and fully working programs
that the Author allows you to evaluate.
All the software is fully working and no
unusable or time limited demos are
listed here.

Link to: Spreadsheets for Structural Engineering

5-Star rating against the software *****excellent ****very good ***good **average *poor

Software Rating Where to get


FRAMEWORK
2D and 3D linear elastic frame analysis. ***** http://home.wanadoo.nl/wolsink
Completely free, 32-bit windows software.
Get this one!

RING is a powerful 32 bit mechanism


analysis program for single and multi-span
masonry arch bridges. A unique feature is its
ability to analyse multi-ring brickwork arch
***** www.shef.ac.uk/ring
bridges. Developed at the University of
Sheffield, UK. Free download.
FastFrame by Enercalc.
This is a 32 bit Windows 95, 98 & NT Two-
Dimensional frame analysis program. You
can model any type of framed 2D structure
by setting "joints" and specifying
"members" that span between them. After
loads and load cases are specified the http://www.enercalc.com/support/
displacements and forces are calculated by **** downloads.asp
solving a bandwidth minimized stiffness
matrix using an active column solver. US,
SI, and Metric units. Requires 800x600
video mode using "Small" fonts. Free
software.
(This would have been a 5-star but for the video mode. It is
still useable and I use it!)

Fastrak Simple Beam by CSC


Analysis and design of simple steel beams
and cantilevers to BS 5950:Part 1:1990. Free
***** http://www.cscworld.com/products/fastrak/multi/
simbeam.htm
program.
BDES v5.0
Free composite and non-composite simple
steel beam design to BS 5950 from the SCI. ***** http://www.corusconstruction.com/
This is on the Corus Contruction Manual CD, request it
from their site.

Structural Engineering Analysis


Software written by Herbert G.
Whitman, PE. Many free programs here!
***** http://www.fseas.info/
English and SI units.
CONCEPT by Reinforced Concrete
Council
Conceptual design program for RC framed *** http://www.rcc-info.org.uk/
buildings.
Get this on the RCC-2000 CD.

Atlas 1.20
Free beam analysis program.
*** http://www.rekenwonder.com/atlas.htm
GRAPE GBW16
3D Beam/Truss Finite Element Program.
**** http://www.grapesoftware.mb.ca/
MicroBEAM 4.10 is the structural analysis
and design tool for engineers. It originally
works in DOS world and now in Windows
3.1/95/98. Free. Also available here is a pile *** http://members.tripod.com/~suphot/
group analysis program and a section
properties analysis program, both free.
MicroBeam is not BS8110.

Skeleton
A free program for the analysis of plane
frames. A DOS program which works in
*** http://www.technouk.com/
Windows 3.1 & 95 Environment.
CADRE Lite 2.1 Cadre Lite is a 32 bit
program for solving 3-D frame and beam ? http://www.cadreanalytic.com/cadrelit.htm
type structures by the finite element method.
UniPhase 2.1
A free, program to assist in selecting soil
density and calculating phase system ** http://www.unisoftltd.com/uniphase.htm
parameters such as void ratio, dry
density, and degree of saturation.
Sphygmic Software Spreadsheet
http://www.ds.unifi.it/~stefanin/
Free Excel-compatible spreadsheet program **** AGR_2001/SH/sssheet.htm
with over 100 functions.
MathGV (32-bit) is a powerful, free
program for graphing mathematical ***** http://www.mathgv.com/
functions.
L I S A is a professional finite element
analysis program courtesy of Joachim
Pommerening. The downloadable version is
limited to a generous 1300 nodes, and has
? http://members.aol.com/jpommereni/LISA.html
very powerful Modelling Tools. It can be
used to analyze Linear Static Stresses,
Eigenvalues and Eigenvectors in dynamic
analysis.
SLFFEA is a free finite element analysis ? http://www.geocities.com/Athens/2099/slffea.html
program which can be used by students as a
learning tool for FEM programming or by
practicing engineers. This program allows
for non-zero boundary conditions and has
skyline storage of the stiffness matrix.

Moment Distribution - free beam analysis


? http://www.angelfire.com/hi/teehornghean/
program for Windows 95 and above.
Rectangular Beam Design is a free
rectangular beam design program to *** http://www.angelfire.com/hi/teehornghean/
BS8110. Windows 95 and above.
Geotechnical Software Directory - Free
geotechnical software here. Click on the Freeware **** http://www.ggsd.com/
heading in the index.

ConSpec from the Ready-mixed Concrete


Bureau
- a software tool to assist in the specification
of concrete for construction projects. The ***** http://www.rcb.org.uk/conspec.htm
aim is to produce specifications which are
both concise and complete. Free.
FBEAM from Fabsec. Free software for the
design of fabricated composite and non-
composite steel beams (with web openings)
to BS5950. Produced by the Steel ***** http://www.fabsec.com/
Construction Institute. You can make up your own
beam using the custom function. Request a FBEAM CD
from Fabsec's web site.

freeCAD is an introductory 3D Computer


Aided Design package with Motion
Simulation capabilities. It allows you to
create and manipulate collections of 3D
parts. The parts are 3D solid models, which ? http://www.askoh.com/
can be connected or assembled by joints or
constraints. The parts and their connections
define the structure or mechanism that the
assembly represents. Freeware.
CONVERT is an easy to use unit
conversion program that will convert the
most popular units of distance, temperature,
volume, time, speed, mass, power, density, **** http://www.joshmadison.com/software/convert/

pressure, energy and many others, including


the ability to create custom conversions!
Uconeer - Units Conversion for Engineers.
This is a powerful, but easy to use, units
http://www.katmarsoftware.com/
conversion tool created specifically for ?
uconeer.htm
engineers. It includes 370 units in 42
categories. Freeware.
Rockgrout - a free suite of programs about
cement grouting in rock foundations for
dams and other heavy engineering structures ***** http://www.users.bigpond.com/houlsby/
by A Clive Houlsby, Grouting Engineer
(retired).
Slope/W Student edition - free slope http://www.geo-slope.com/downloads/
?
stability analysis software. student.asp
Curvefit v2.11-A - Fits your data to one of
? http://www.engineers.com/software/cfit.zip
25 formulas and show you the best fit. Free.
Winfit - non linear least squares fitting
ftp://ftp.mecheng.asme.org/pub/
program for windows 3.x. Requires ?
WIN_ENG/WINFIT10.ZIP
VBRUN100.DLL in the /windows directory.
COMPACT is a suite of computer-aided
learning programs covering 11 topics on
concrete technology and the design of
concrete structures to EC2, where
appropriate. Several of the modules, ***** http://www.compact.org.uk/software/
particularly on reinforced concrete design,
will also appeal to engineers wishing to
familiarise themselves with EC2. Free
download.
Structural Analysis FEM Software - free
Java Software that be tested online. Some http://engineering.ipfox.com/
can be downloaded to run on your computer. OR
***
3D FEM Package, 2D FEM Package, Beam http://members.dencity.com/thefemsite/
Analyser, Torsion Analyser, Truss Analyser, index.html
Vibrations Plotter, Graph Plotter.
MARC/Designer - A completely free, fully
functional finite element analysis software
courtesy MARC Analysis and Research http://www.fest.tuwien.ac.at/EducationStudents/
Corp limited to 500 nodes. Can be used for ? Instituts-EDV/OnlineManuals/FEM/MARC/Designer
/Download/contents.html
Linear static stress, buckling analysis, steady
state heat transfer and modal analysis. It has
an excellent tutorial. @5MB
Graphmatica - is a powerful, easy-to-use,
equation plotter with numerical and calculus
features. Graph Cartesian functions,
? http://www8.pair.com/ksoft/
relations, and inequalities, plus polar,
parametric, and ordinary differential
equations.
BeamBoy Beam Analysis Tool is a utility
for calculating engineering stress and http://www.geocities.com/richgetze/
deflection in structural beams and shafts. ****
BeamBoy is freeware.
Solution of 2-Dimensional Trusses and 3-
Dimensional Trusses - Two QBasic
programs. Tensile & compressive forces and
reactions are output. The global stiffness ? http://www.angelfire.com/hi/teehornghean/
matrix is displayed in these programs. Also
a Wireframe Modelling program with source
code. Free.
WStrudl's WinBeam - is a free, continuous
beam analysis program. It is in the WStrudl
DEMO but is independent to WinSTRUDL. http://www.civilstructure.com/products/
Download and install the WStrudl demo, run **** DownLoad/evaluate.htm
the WMaster.exe and click on the Beam
icon.
Truss Master Analysis Program - Single
form interface, input generators, deflection http://www.clubi.ie/ccaprani/
animation, pan & zoom functions. Free,
*** trussmaster.htm
postware.
Beamax is an application for graphically
creating, editing and analysing continuous
beams. The program supports an
Automation interface which allows to run ** http://www.aisto.com/roeder/cae/
the analysis in other applications like
Microsoft Excel or Visual Basic - Free.
Femax is a component system that provides
functionality for structural analysis using the
Finite Element Method (FEM). The system
defines interfaces for nodes, degrees of
freedom (DOF), matrices, vectors, models
? http://www.aisto.com/roeder/cae/
and elements. The Component Object Model
(COM) is used for object linking. All
components support an Automation
interface for integration using the Visual
Basic for Applications (VBA) environment.
CALSD "Educational Structural
Engineering Program" has been developed
at the University of California, San Diego, to
support teaching and learning of structural
engineering concepts and techniques.
? http://www.aisto.com/roeder/calsd/
CALSD provides functionality for three-
dimensional linear elastic static and dynamic
analysis. The system has been enhanced
with a Windows 95/98/NT user interface.
Free
Rebar - Freeware bars calculator from
Alashki Engineering Solutions. ** http://www.alashki.com/freeware.htm

DDA for Windows - a free Windows


program to perform discontinuous http://www.ce.berkeley.edu/Programs/
deformation analysis. Manual is available **** Geotech/DDA/
online.
ALP99 - Axially loaded pile, elastic pile
supported by elasto-plastic springs.
LLP99 - Laterally loaded pile, beam on
elasto-plastic springs.
SOILMECH - A summary of the basic
principles of soil mechanics.
SPW2001 - Sheet pile wall analysis, beam
http://geo000.citg.tudelft.nl/software
on elasto-plastic springs, student edition **** /software_e.htm
(maximum 4 layers).
STB2001 - Slope stability by Bishop's
method, student edition (maximum 3 soil
polygons).
Winkler - Beam on elastic foundation.
Free programs from the Geotechnical
Laboratory of Delft University.
QSection - free Windows program for
http://www.mecheng.asme.org/
computing the section properties of arbitrary *** database/DESIGN/MASTER.HTML
sections.
ELPLA Limit Edition (ELastic PLAte) -
Analysis and design of slab foundations. The
reinforcement of slab can be carried out by
one of the following design codes: ACI, EC
2, DIN 1045 and ECP. The ELPLA limit
edition allows users to easily create projects
**** http://www.elpla.com/
for analysis and design slab floor or raft
foundation. It includes all functions of the
ELPLA standard edition except that the
node number is limited to 200 nodes.
Portal Frame Analysis for MS Windows ? http://www.dukeuk.freeserve.co.uk/
v3.x/95/98 - Portal Frame Analysis to files-x.htm
BS449, works out moments, reactions,
stresses and the approximate section sizes
required for a given span of a steel portal
frame.
Frame - Free software for static and
dynamic structural analysis of 2D and 3D
linear elastic frames and trusses. Computes
the static deflections, reactions, internal
element forces, natural frequencies, mode ? http://www.duke.edu/~hpgavin/frame/
shapes and modal participation factors of
two-and three- dimensional elastic structures
using direct stiffness and mass assembly.
From Duke University North Carolina.
Cbeam 2002 is a continuous beam
software package that allows the user to
solve statically indeterminate beam
structures. Defining multiple span
elements of varying elasticity's with
uniform, distributed and concentrated ***** http://www.seaoc.org/Pages/software.html
loading applications along with a variety
of support conditions is easily at the
hands of the user.
Note. Although the package is described as a demo I
can't see any limitations on it's use. Also there
appears to be no requirements to register.

FREE CAD SOFTWARE

IntelliCAD 2000 by CADopia (base


product) is a full 2D CAD program and is
available for free. IntelliCAD's native file http://www.cadopia.com/register.asp
format is .DWG. It allows you to open any ***** OR
existing Autodesk AutoCAD file (V2.5 http://www.intellicadms.com/
through 2000) and there is no file conversion
or data loss.
Volo View Express by Autodesk
Free application that lets you display and
print AutoCAD® drawings without
AutoCAD software. You can exchange ***** http://www.autodesk.com/voloviewexpress
information with everyone involved in your
project or on your design team, independent
of a CAD program.
TurboCAD® v 4 Learning Edition, is a
comprehensive, fully functional 2D CAD
software product. It is the ideal vehicle
for new users to learn how to use and
discover the concepts behind CAD ***** http://nct.digitalriver.com/fulfill/0002.16/tc/
software. In addition it is a viable
product for producing professional 2D
CAD drawings. Free software.
CADVANCE 6.5 for Windows - This is ? http://www.cadvance.com/65form.htm
a re-release of CADVANCE Version 6.5,
a CAD software system designed for
Windows 3.1, but yet also runs on
Windows 95/98 and NT. Originally
released in 1995 at a suggested retail
price of $1950, it is now available to
anyone free of charge for the software.
This is not a demo, but a full working
version.

QCad is a free open-source 2D CAD system


for Linux, various Unices and Windows.
The developers main goals are to build a
stable, fast and easy to use CAD for **** http://www.qcad.org/index.php3
everyone. One doesn't need any knowledge
of a CAD program to start working with
QCad.
CadStd Lite
Free 2-D CAD program. *** http://www.cadstd.com/
MINOS v. 2.1
? http://perso.wanadoo.fr/rleboite/minos.htm
Minos is a free, full 3D Solid CAD System.
SoftCAD.3D® Lite Version 1.16 for
FREE!
? http://www.softcad.com/index.html
Practical-use software for easy creation of
three- dimensional models.
Solid Edge Origin is a FREE, limited-
function version of our complete Solid Edge
software. It includes 3D modeling of basic ? http://www.solid-edge.co.uk/home1.htm
parts, a complete 2D drafting system, import
and export of 2D CAD data and tutorials.
DesignWorkshop Lite - creates 3D models,
walk-throughs and renderings, from sketch
to presentation, for home design and
? http://www.artifice.com/free/dw_lite.html
visualization of architecture, landscapes,
exhibits, or any spatial design projects. Free
3D Software
VARKON - a free CAD system and high
level development tool for Engineering,
? http://www.microform.se/index.htm#VAR
Computer Aided Design and Product
Modeling applications.

Thinking 2D - free 2D CAD program. *** http://www.thinking2d.cjb.net/


WHIP!® Viewer from Autodesk allows
you to quickly and easily distribute design
files over a network without AutoCAD®
http://www3.autodesk.com/adsk/section/
software. It boosts collaboration and ***** 0,,163301,00.html
information exchange among project
members, and it’s available for download
free of charge.
Drawing QuickViewer provides integrated
http://www.mv.com/ipusers/crews/
"quick viewing" of AutoCAD drawing files ?
quickview.htm
from the Windows File Explorer. Freeware.
DWG Viewer 3.0 - Free DWG/DXF/DWF
? http://www.infograph.com/products/dwgviewer/
Viewer.
Power Tools for AutoCAD offers you basic
http://www.winsite.com/bin/
freeware tools for AutoCAD 2000, **** Info?500000009183
organized in a clear menu.
DESI-III is a powerful and user friendly 2D ? http://users.pandora.be/desi-iii/
CAD system with a lot of professional
features: associative hatching, dimensioning,
associative text attributes to lines and
symbols, multiple (up to hundreds) lines or
line chains and curves. Automatic
interruption of lines on user definable
boundaries of symbols AND repairing if the
symbols is moved or deleted. Adaptive and
powerfull line pattern definitions, macro's
etc. etc. Freeware.
OttoPDF is a freeware program that
http://www.myndkryme.com/products/
converts AutoCAD drawing files into Adobe ?
ottopdf.html
Acrobat PDF files without using AutoCAD.
OttoTiff is a conversion utility that takes
http://www.myndkryme.com/products/
AutoCAD DWG files and converts them to ?
ottotiff.html
TIFF Group IV image files. Freeware.
European Structural Steel Sections http://www.europrofil.lu/Index/
?
available in .DWG format. ind_software.html

Free USA Engineering Software

WSDOT Bridge Engineering Software


Free programs from the Washington State http://www.wsdot.wa.gov/eesc/bridge/Software/
Department of Transportation.
Office of Earthquake Engineering
Software
Free California Transportation Department http://www.dot.ca.gov/hq/esc/earthquake_engineering/index.html
software for bridge foundations, piles and
concrete sections.
Expansion Joint Spacing Design
http://www.dynasoftinc.com/expjoint.htm
Free program.
Aladdin - A computational toolkit for the
interactive matrix and finite element analysis
http://www.isr.umd.edu/~austin/aladdin.html
of large engineering structures, particularly
building and highway bridge structures.
Pavement-Transportation Computer
Assisted Structural Engineering -
Distribution site for free airfield, road,
http://www.pcase.com/
railroad, and general transportation, design
and evaluation software written by US Army
Corps of Engineers
FElt is a free system for finite element
analysis.
The current version of FElt knows how to http://felt.sourceforge.net/
solve linear static and dynamic structural
and thermal analysis problems.
Structural Engineering Programs -
free from the Florida Department of http://www.dot.state.fl.us/structures/proglib.htm
Transportation.
Bridge Software Institute - University of
http://bsi-web.ce.ufl.edu/downloads/
Florida, bridge software.
IDARC - A Computer Program for Inelastic
Structural Analysis developed at the State
http://civil.eng.buffalo.edu/idarc2d50/
University of New York at Buffalo. The
program is distributed free.
Composite Beam/Girder Program
ftp://users.aol.com/hspannu/compbeam.exe
Free program.
Concrete Column Program - This highly
powerful program is an essential tool for
designing concrete columns in a
Professional Engineering office. The
ftp://users.aol.com/hspannu/column.exe
Program can handle UniAxial, BiAxial
design of Circular, Rectangular and ANY
SHAPE (Irregular Shape defined by X,Y
Coordinates) Columns.
ConcBeam - reinforced concrete beam
"calculator". User enters Bending Moment
and Shear, the program generates
reinforcement required in text and graphical
http://www.krtek.com/
formats. Working Stress, Load Factor and
Load and Resistance, AASHTO or ACI
requirements. English and Metric units.
Free.
97 UBC Lateral Design Spreadsheet - this
spreadsheet is intended as an educational
tool for the learning and understanding of
the Wood provisions of the 1997 Uniform http://www.seaoc.org/Pages/software.html
Building Code. It will perform both flexible
and rigid diaphragm analysis. Requires
Microsoft Excel. Free.
Two-cycle Moment Distribution - RC
Beam - this Excel spreadsheet performs
two-cycle moment distribution per the PCA
publication of the same name. It designs
http://www.seaoc.org/Pages/software.html
positive and negative moment
reinforcement, stirrups, checks deflection,
accounts for column stiffness and performs
crack control analysis.
StlShape - is a free program for the analysis
and design of simply supported beams and http://members.tripod.com/~stlshape/
cantilevers. The program can cater for steel, or
timber and reinforced concrete to American http://www.seaoc.org/Pages/software.html
building codes.
Bridge Application Software - free from
the Colorado DOT Information Systems, http://www.dot.state.co.us/Business/Design/PECSU/
Project Engineering Customer Support Unit.
Excel spreadsheet to analyse freestanding
signs. Free download from "Engineering http://www.signweb.com/installation/cont/engss.html
Sign Structures".
The BridgeSight Shear Designer - Free
shear design aid for reinforced concrete http://www.bridgesite.com/sheardesigner.htm
beams. AASHTO LRFD design. Microsoft
Excel version 7.0 or later.
Mathcad Worksheets - for calculating
lateral soil pressures on a retaining wall
using the Rankine method, area of steel for a http://www.bridgesite.com/freesoftware.htm
concrete T-Beam given the design moment
and properties of any general section. Free.
NONLIN - Nonlinear dynamic time history
analysis of single degree of freedom
systems. Microsoft Windows based http://www.fema.gov/home/EMI/nonlin.htm
application for the dynamic analysis of
single degree of freedom structural systems.
Concrete Building Design by Computer -
free software with explanations and http://ourworld-top.cs.com/JackC7799/index.htm
illustrations covering the analysis and design
of concrete building structural components.
Mathcad Application Files - A free
collection of Mathcad applications on the
http://www.mathsoft.com/appsindex.html
official Mathcad web site. Includes a section
on Civil Engineering.
From The Structuralist Net - Flexible
diaphragm shear distribution Excel
http://www.structuralist.net/cgi-local/
spreadsheet, Wide-flange steel beam
UltraBoard/UltraBoard.cgi?
analysis spreadsheet and an Excel macro to
action=Headlines&BID=67&SID=4522
extract line coordinates from Autocad
Drawings. Free downloads.
MathCad Templates - many Mathcad http://www.structuralist.net/cgi-local/
template files for structural engineers on the UltraBoard/UltraBoard.cgi?
The Structuralist.Net. Free downloads. action=Headlines&BID=68&SID=4522
Civil Engineering Mathcad Templates -
http://collab.mathsoft.com/~Mathcad2000
free downloads from the Mathcad
/guests
Collaboratory.
Geotechnical Engineering Software - Free
software from the Office of Bridge
Technology, Federal Highway http://www.fhwa.dot.gov/bridge/geosoft.htm
Administration, United States Department of
Transportation.
DTColumn - this program quickly and
easily calculates reinforced concrete column
http://www.dtware.com/
interaction diagrams. It is a FREE download
to anyone interested in using it.
Plane Failure Analysis - calculates the
factor of safety for plane failures in rock and
soil slopes where defined discontinuity http://www.engr.siu.edu/mining/kroeger/
planes exist. Free from the Southern Illinois
University.
Wedge Failure Analysis - includes a
stereonet view of the planes the user inputs
and a printable summary of the analysis. The
user can input artifical support (rockbolts,
http://www.engr.siu.edu/mining/kroeger/
cables, bolts) or calculate the required
support by entering the desired factor of
safety. Free from the Southern Illinois
University.
IDARC-BRIDGE - A Program for Three-
Dimensional Nonlinear Inelastic Analysis of
Bridges. Allows many aspects of bridge
behavior to be explicitly modeled. http://civil.eng.buffalo.edu/idarc-bridge/
Developed at the State University of New
York at Buffalo. The program is distributed
free.
SteelS is a utility containing shape
information for W, S, M and HP sections.
Basic mechanical and geometrical properties http://www.steelsplus.com/freeware.html
are shown and its based on ASTM A6 as it
was current in 2000. Freeware.
Rest Of The World - Free Engineering Software

3D Pile Analysis and Cross-section - 2 free


http://home.wanadoo.nl/wolsink
analysis programs in Dutch.
SpanCAD is software for the design of
structural reinforced concrete walls, http://www.mechanics.citg.tudelft.nl/
discontinuities, deep beams, walls loaded in spancad/
plane and box-shaped structures.
Structural Safety - this program computes
the reliability of a structure from the safety
http://www.mechanics.citg.tudelft.nl/%7Epierre/
factors that are used in its design. It is StructuralSafetyProgram/safman.html
freeware, so, you can download and use it
free of charge.
Raul Canle's Structural Engineering page
- has some small programs for purlin,
http://www.ctv.es/USERS/raul.canle/
stiffeners and plate girder calculations to
home.htm
USA and Spanish codes available for
download (in Spanish).
IFB (Integrated Floor Beams) -The IFB
program has been developed for the design
of slimfloor slabs based on Integrated Floor
Beams (IFB) sections, which are composed http://www.europrofil.lu/Index/
of a frame with a split-up wide flange ind_software.html
section and a plate welded as bottom or top
flange. It is only possible to calculate simple
beams that are hung at the two supports.
AFCC - The AFCC program calculates the
ultimate loads for composite columns AF
30/120 at room temperature according to
http://www.europrofil.lu/Index/
EUROCODE 4, part 1.1 (ENV 1944.1-1)
ind_software.html
and for the ISO fire classes R30, R60, R90
and R120, in accordance with EUROCODE
4, part 1.2 (ENV 1944,1.2).
AFCB - The AFCB program calculates the
ultimate bending moments for composite
beams at room temperature according to
http://www.europrofil.lu/Index/
EUROCODE 4, part 1.1 (ENV 1944.1-1)
ind_software.html
and for the ISO fire classes R30, R60, R90
and R120, in accordance with EUROCODE
4, part 1.2 (ENV 1944,1.2).
European Structural Steel Sections
http://www.europrofil.lu/Index/
Technical Data in Excel format from the
ind_software.html
Europrofil sales programme.
Response-2000 is an easy to use sectional
analysis program that will calculate the
strength and ductility of a reinforced
concrete cross-section subjected to shear,
moment, and axial load. All three loads are
http://www.ecf.utoronto.ca/~bentz/r2k.htm
considered simultaneously to find the full
load-deformation response using the latest
research based on the modified compression
field theory. The program was developed at
the University of Toronto.
Membrane-2000 is an easy to use analysis http://www.ecf.utoronto.ca/~bentz/m2k.htm
program that will calculate the load-
deformation relationship for a uniform panel
of reinforced concrete subjected to in-plane
shear loading. The program implements the
Modified Compression Field Theory as well
as the Rotating Angle-Softened Truss Model
and the Fixed Angle-Softened Truss Models.
The program was developed at the
University of Toronto.
Shell-2000 is an easy to use analysis
program that will calculate the load-
deformation relationship for a general plate
or shell subjected to any combination of the
8 loads that are possible for such an element.
Shell-2000 is the first program to properly http://www.ecf.utoronto.ca/~bentz/s2k.htm
account for the out-of-plane shear
distribution in a rigorous way. The program
implements the Modified Compression Field
Theory to arrive at solutions. The program
was developed at the University of Toronto.
Triax-2000 is an easy to use analysis
program that will calculate the load-
deformation relationship for a uniform block
of reinforced concrete in three dimensions. It
may be subjected to any combination of the
http://www.ecf.utoronto.ca/~bentz/t2k.htm
general 6 stresses that can be applied to an
arbitrary 3D block. The program implements
the Modified Compression Field Theory to
arrive at solutions. The program was
developed at the University of Toronto.
Multiple Fastener Connections
(WIN/UK/free) - Developed for the
research project 'double shear timber
connections with dowel type fasteners', by
Dr.Ir. Andre Jorissen. With the MFJ
http://www.veenhoven.com/software.html
program the reduction in the load carrying
capacity for multiple fastener connections
can be simulated for a variable number of
fasteners, depending on the geometry and
material properties.
Timber Frame Housing (DOS/NL/free) -
Developed for the Nordic Timber Council
and distributed amongst architects, technical
schools and consumers in the Netherlands http://www.veenhoven.com/software.html
on quite a large scale. The program shows
you the main principles of detailing and
construction for this building method.
Dutch Glulam Design Program
(DOS/NL+UK/free) - With the glulam
design program it is easy to design
laminated timber constructions quickly and
accurately. The program has been designed
http://www.veenhoven.com/software.html
to be used by structural engineers as well as
architects. The program calculates and
optimizes the required dimensions, and
outputs the moments, shear forces and
displacements on either screen or printer.
Timber Poles Program (DOS/NL/free) - http://www.veenhoven.com/software.html
Program for the design and calculation of
foundations with timber poles. You can
download and use the program for free.
Analysis of a Reinforced Concrete Section
- free spreadsheet for the new Australian
Standards Concrete Structures and Bridge
Design Codes. Calculate stresses under
combined bending & axial load, minimum http://www.terrassociates.com/software.htm
reinforcement areas, crack widths to BS5400
& EuroCode2, ultimate moment capacity for
specified axial load, display moment/axial
load interaction diagram.
ProfilARBED - European beams selection
program. The aim of the program is to give
the user a fast method to find a steel beam
http://www.europrofil.lu/Index/
and its associated properties. This can be
ind_software.html
done by selecting a profile by its name or by
searching a profile responding to a set of
user-defined conditions.
CCD - Composite Column Design http://www.europrofil.lu/Index/
according to Eurocode 4 (ENV 1994-1-1). ind_software.html
PURLIN SIZER - is a downloadable Excel
spreadsheet file which uses the information
from the Cold Formed Lipped Channel http://www.bauerconsultbotswana.com/
spreadsheet to automatically size CFLC engineering.html
purlins. Also, South African Steel Tables in
Excel format.
DesignInHyne / TasDesign - Free timber
http://www.huntrobinson.com.au/
beam design software for design to
software5.html
Australian standards.
Top1 NL design version 4.21 - Dutch
modern design & engineering tool for timber
structures. Optimizes a wide range of
structure types, from simple beams and http://www.veenhoven.com/top1nl.html
purlins, through boomerang beams and
portals. In glulam, sawn timber or Kerto.
German version available too. Free.
Excel spreadsheets for geotechnical
http://www.bygg.ntnu.no/geo/kurs/
engineering from the Norwegian University
laremod/laremod.htm
of Science and Technology.
BigSolve - German beam/frame analysis
http://www.stabstatik.de/
program.

Free Office Software

Columbus - Free Document Management


system from Arup.
***** http://columbus.arup.com/
AVG 6.0 Anti-Virus System - Free Edition,
AVG Resident Protection, AVG Email
Scanner, AVG On-Demand
Scanner, Scheduled Tests, Free Virus
Database Updates, Automatic Update ***** http://www.grisoft.com/
feature, Easy-To-Use Interface, Automatic
Healing of infected files, AVG Virus Vault
for safe handling of infected files.
F-PROT Anti-Virus Software
From the Imperial College server. Free for
personal use. Click the following for more ***** http://sunsite.org.uk/packages/simtelnet/msdos/virus/

information: CLICK!
Time Stamp - a freeware program you
can use to easily track time spent on a
project. It enables you to time how long
you spend on a task, including features
that let you take "slack time" for a phone
***** http://www.syntap.com/
call or break. Times for various tasks
can be linked to an hourly charge rate
for accurate billing.
ZipCentral is a free, robust and easy to use
zip file manager with a lot of features.
Supports all common zip file actions plus
creation of self-extracting archives, drag and
drop, disk spanning, shell execution, ***** http://zipcentral.iscool.net/
repairing damaged archives and more. User
interface similar to other popular shareware
archive managers.
StarOffice™ software is a powerful, cross-
platform office productivity suite --
available free of charge -- that delivers ***** http://www.sun.com/staroffice/
seamless access to applications and files.
Includes spreadsheet software.
Copernic 2000 is an intelligent agent that
carries out your net-searches by
simultaneously consulting the most
important search engines of the Internet.
***** http://www.copernic.com/
Some 65 information sources are accessible
with this version. Copernic 2000 is FREE.
Go!Zilla - recover from download errors
and resume failed downloads, manage and
categorize files to download later and get ***** http://www.gozilla.com/
those files from the most responsive site.
Free unlimited, fully functional.
Microsoft Word Viewer 97/2000
(Win95/98/NT)
This free program lets you view and print
http://office.microsoft.com/downloads/
not only MS Word 97/2000 documents, but ***** 2000/wd97vwr32.aspx
also documents created with all prior
versions of Word for Windows and version
4.0 and above of Word for Macintosh.
Free PDF v0.95 Public Beta - Create your
own PDFs files for free. Make professional
looking, PDF Portable Document Format ***** http://www.webxd.com/zipguy/freepdf.htm
viewable/printable with Adobe Acrobat
Reader on any platform.
Adobe® Acrobat® Reader™ is free
http://www.adobe.com/products/acrobat/
software that lets you view and print Adobe ***** readstep2.html
Portable Document Format (PDF) files.
IrfanView is a very fast FREEWARE 32-
http://stud1.tuwien.ac.at/~e9227474/
Bit graphic viewer for Windoze 9x, ***** english.htm
Windows NT and Windows 2000.
602Pro PC Suite v2000b is an integrated http://www.software602.com/products/pcs/
office suite which includes four applications: index.html
a word processor, spreadsheet, graphics
editor, and visual desktop. OS: Windows
95/98/Me/NT/2000 License: Freeware.
GNOME Office includes AbiWord,
Gnumeric, GIMP, Dia, EOG, GNOME-PIM,
and GNOME-DB. AbiWord is a word
processor, Gnumeric is a spreadsheet
application, the GIMP is an extremely
powerful and versatile image editing ? http://www.gnome.org/gnome-office/
program, Dia draws structured diagrams,
Eye Of GNOME is an image viewer,
GNOME-PIM is a personal information
manager, and GNOME-DB provides
database connectivity. Freeware project.
Grids was designed as a simple vectorial
drawing software for Windows. Its principal
functions are dedicated to schemes drawing,
thus you can generate libraries with symbols
http://www.geocities.com/SiliconValley/
which can be easily used (many symbols are **** Lab/3719/
provided with Grids). It can be used for
networks schemes, for electrical schemes,
for databases conception, flood charts, etc.
Grids is a free software.
Drawme - a drawing program for Windows
3.1 This drawing program is freeware and is http://ourworld.compuserve.com/
designed to provide a simple means for
*** homepages/John_Maddock/drawme.htm
creating diagrams and illustrations to scale.
WordWeb is a free comprehensive
dictionary and thesaurus that works with
several word processors or as a stand
alone program. The program has a large
database of more than 120,000 root ***** http://wordweb.info/free/
words, 100,000 synonym sets and
comes with a template file so you can
use it directly with Microsoft Word 6.0,
7.0, or 97.
THE Thinking Man's Thesaurus -
includes a powerful thesaurus and a
http://www.theabsolute.net/sware/
dictionary which can check the spelling of **** index.html#thes
individual words as well as provide you with
a list of similarly spelt words. Freeware.
Sicyon is a freeware all-in-one type of
software consisting: expression calculator +
constants database + units converter + ***** http://www.sicyon.com/
solver.
Calc98 - is a pocket calculator simulator
program for the Microsoft Windows
operating system. It is a replacement for the
calculator program which is included with
the operating system, with many additional
features and greater flexibility. It is
**** http://www.calculator.org/
especially designed for scientific and
engineering users and includes a wide range
of units conversions and scientific
functions. Free.
GraphTablet - With a simple, pushbutton
interface you can create blank rectangular,
polar, or semilog graph paper on your home *** http://www.graphtablet.com/
printer. Free.

Reference: http://www.structural-engineering.fsnet.co.uk/

Das könnte Ihnen auch gefallen