Beruflich Dokumente
Kultur Dokumente
Introduc ons of srs is made of common drive-in racks with shu letrac,shu le vihciles come back and forth on tracks in the roadway to stock and pick up goods ,as
well as to make an inventory.This flexible designning can be 7 to 40 depth. The storage mode can be “first in, first out”or “first in, last out”. For easy managing, ach
roadway only stock cargos with the same item. on this system is suitable or the goods of large quan ty but few items.
Introduc on of PBR
Push back rack ,is a high density storage rack,with many vehicles phased between front beam and back
beam. Each pallet loaded will be pushed into the structure by succeeding pallets.
Ÿ The opera on method is first-in-last-out; pallets are accessed from one side only.
Ÿ All the opera on for stocking and picking up is made at the lower end only ,forkli does not need
drive in to the stocking aisle, so it has high density and quick opera on.
GPR
Gravity pallet racking consist of uprights, beams, rollers and damping rollers. This deign needs inclina on about 1.6 to 2.0
degree. Pallets are loaded at the upper end of the slop and travel through the block on glidewheels by gravity. So it is called
gravity pallet racking. When pallets are removed,damping rollers will be se led to control the slip speed and separator
will be put in front of the lower end. I t follows the principle of “first in first out”, so when designing, forkli aisles of two
ends will be needed. the remaining pallest in the lane move forward, bringing the next in line to the picking face.
Advantage :
Power mobile racking are individually power-driven and run on
precision-laid steel rails. With this system, one aisle can serve six,
eight, ten or more racks, the racks being moved electrically to
open up an aisle where required. Control is by push-bu on. The
electric motors are geared to the loadings of racks, plus a
carefully calculated safety margin. The racks move smoothly
without jerking or snatching. It takes only 30 seconds for a
gangway to open.
Detail Design
S-Upright Sec ons S-Upright & Connec ng Plate S-Upright & P Beam Hanger
L
W
Advantages:
Ÿ Save Space
Ÿ Large storage content
Ÿ Good confiden ality
Ÿ Beau ful appearance
Ÿ High Safety
Mezzanine racking system, using medium duty shelving and heavy duty racks as support configured floor board (Choice of rack and shelving depends on load
capacity of each unit). Floor board is commonly made of cold-rolled steel board pa ern plate, grid plate.
A c shelving system, usually using medium-sized shelf-type shelves or heavy-duty shelf-type shelves as the main support plus floor panels (depending on the
total load weight of the shelf unit to determine which shelf to choose), the floor panels are usually selected from cold-rolled steel slabs, pa erned steel slabs Or
steel grille slabs.
Floor Type Checkered Plate Hollow Steel Plate Circular Hollow Plate Grid Plate
A car 4S shop
Detail Design
Jakarta Head Office : Surabaya Branch Office : Medan Branch Office : Bandung Branch Office :
Graha Kencana Building Lt. 10 Suite 10F Bumi Mandiri Tower I Lt. 10 Suite 1008 Kompleks MMTC Warehouse Blok C-7 Wisma HSBC Lt. 6 Suite B
Jl. Raya Perjuangan 88 Jl. Jend. Basuki Rachmat 129-137 Jl. Pasar V, Pancing Jl. Asia Afrika No. 116
Kebon Jeruk Jakarta Barat 11530 Surabaya 60271 Medan 20371 Bandung, Jawa Barat 40112
Phone : 021 - 5020 3030 Phone : 031 - 535 3001 Phone : 061 - 800 323 24 Phone : 022 - 426 7333
Fax. : 021 - 583 55 400 Fax. : 031 - 535 3002 Fax. : 061 - 800 322 25 Fax. : 022 - 426 7330
email : sales@indotara.co.id email : sales-sby@indotara.co.id email : sales-mdn@indotara.co.id email : sales-bdg@indotara.co.id