Sie sind auf Seite 1von 136

Quality Control Register

(Road works)

Name of Work: Improvement, widening and strengthening of Baroh Chowk


DehrianJandrahTaliTikkaLagruDolaKardianaKhundian to
Nahalian road. inKM. 0/00 to 49/400under CRF-HP-2018-19-
146 in Distt. Kangra H.P. (SH:-F/C, R/wall & B/wall, CD
works, SD, Parapets, M/T Work, Road Side Furniture i/c 91.674
mspan bridge over Nakker Khad at RD 9/440a/w approaches
etc.)

Estimated Cost:

Tendered Amount: Rs. 40,19,97,935/- (Rs. 4019.98 Lac)

11.06.2019 EE Dehra Letter No. 1829-38


Date of Award:
(L.O.I. EE Dehra No. 17199-201 Dated 08.03.2019)

Agreement Number:

Date of Start: 08.03.2019

Stipulated Date of Completion: 22.09.2021

Actual Date of Completion:

M/S Satish Kumar Sharma (Govt. Contractor)


Name of Contractor:
VPO Dhussara, Tehsil Amb, Distt. Una, Himachal Pradesh.

Name of Section: Baroh

Name of Sub-Division: Baroh

Name of Division: Tanda at Nagrota Bagwan

Issued to:

Executive Engineer,
HP PWD Division,
Tanda at Nagrota Bagwan

QC Register (Concrete works) 1


QC Register (Concrete works) 2
INDEX

No. of Test
Sr.
Description Page No. Conducted (use
No.
pencil for writing)
1 Gradation of coarse aggregate
2 A.I.V.
3 Flak. & Elong. Index
4 Water Abs. of Agg.
5 Gradation & F.M. of Sand
6 Silt Content of Sand
7 Slump Value Concrete
8 Comp. Strength Concrete
9 Gradation of GSB
10 Gradation of WBM G-II
11 Gradation of WBM G-III
12 Vol. Analysis of WBM/GSB
13 Gradation of Agg. (B.C.)
14 Binder Content (Bit. Material)
15 Field Density (B.C.)

QC Register (Concrete works) 3


QC Register (Concrete works) 4
Name of Test: Gradation of Coarse Aggregate

Test-I

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 5


Name of Test: Gradation of Coarse Aggregate

Test-II

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 6


Name of Test: Gradation of Coarse Aggregate

Test-III

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 7


Name of Test: Gradation of Coarse Aggregate

Test-IV

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 8


Name of Test: Gradation of Coarse Aggregate

Test-V

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 9


Name of Test: Gradation of Coarse Aggregate

Test-VI

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 10


Name of Test: Gradation of Coarse Aggregate

Test-VII

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 11


Name of Test: Gradation of Coarse Aggregate

Test-VIII

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 12


Name of Test: Gradation of Coarse Aggregate

Test-IX

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 13


Name of Test: Gradation of Coarse Aggregate

Test-X

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 14


Name of Test: Gradation of Coarse Aggregate

Test-XI

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 15


Name of Test: Gradation of Coarse Aggregate

Test-XII

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 16


Name of Test: Gradation of Coarse Aggregate

Test-XIII

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 17


Name of Test: Gradation of Coarse Aggregate

Test-XIV

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 18


Name of Test: Gradation of Coarse Aggregate

Test-XV

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 19


Name of Test: Gradation of Coarse Aggregate

Test-XVI

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 20


Name of Test: Gradation of Coarse Aggregate

Test-XVII

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 21


Name of Test: Gradation of Coarse Aggregate

Test-XVIII

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 22


Name of Test: Gradation of Coarse Aggregate

Test-XIX

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 23


Name of Test: Gradation of Coarse Aggregate

Test-XX

Date of Test:_______________________ Location………………………… Size of Agg. 20 mm

Sr. IS sieve Weight retained %age weight Cumulative %age %age Required
No. size (mm) (g) retained wt. retained passing passing % age.

1 40 100

2 20 85-100

3 10 0-20

4 4.75 0-5

5 PAN ---

6 Total

Size of Agg. 10 mm

Sr. IS sieve Weight %age weight Cumulative %age %age Required


No. size (mm) retained (g) retained wt. retained passing passing % age.

1 12.5 100

2 10 85-100

3 4.75 0-20

4 2.36 0-5

5 PAN ---

6 Total

Combined Gradation

Sr. IS sieve F-I F-II %age different fraction Range


No. size (mm) 20 mm 10 mm F-1 F-II Combined

1 40 100
2 20 90-100
3 10 25-55
4 4.75 0-10
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 24


Name of Test: Aggregate Impact Value

Test-I

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

Test-II

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 25


Name of Test: Aggregate Impact Value

Test-III

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

Test-IV

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 26


Name of Test: Aggregate Impact Value

Test-V

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

Test-VI

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 27


Name of Test: Aggregate Impact Value

Test-VII

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

Test-VIII

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 28


Name of Test: Aggregate Impact Value

Test-IX

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

Test-X

Date of test: _______________________

Aggregate Size =

S. No. Description Sample I Sample II

Original weight of dry sample taken (passing through 12.5mm and


1
retained on 10.0mm IS sieve) =W1 (g)

2 Wt. of agg. retained on 2.36mm IS sieve after the test =W2 (g)

3 Wt. of agg. passing through 2.36mm IS sieve = (W1-W2)=W3 (g)

4 Aggregate Impact value= (W3/W1) X100 (%)

5 Avg. Impact Value (%)

Note (if any):

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 29


Flakiness & Elongation Index Test-I

Name of Test : Flakiness Index of Coarse Aggregate


Date of Test :
Flakiness Index

Wt. of Wt. of
Passing Retained %age Weight Fraction
Total No. of pieces
Sr. through on IS of sample of Total Weighted
pieces in passing
No. IS Sieve sieve passing sample %age
each sieve, respective
(mm) (mm) respective sieve seived
(in g) sieve,(in g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Flakiness Index (F.I.) =

Name of Test : Elongation Index of Coarse Aggregate

Elongation Index

Passing Wt. of fraction Wt. of agg. Retained on


Sr. Retained on IS
through IS consisting of at least each slot of elongation
No. sieve (mm)
Sieve (mm) 200 pieces (g) gauge (g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Elongation Index (E.I.) =

Combined Flakiness & Elongation Index = __________________

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 30


Flakiness & Elongation Index Test-II

Name of Test : Flakiness Index of Coarse Aggregate


Date of Test :
Flakiness Index

Wt. of Wt. of
Passing Retained %age Weight Fraction
Total No. of pieces
Sr. through on IS of sample of Total Weighted
pieces in passing
No. IS Sieve sieve passing sample %age
each sieve, respective
(mm) (mm) respective sieve seived
(in g) sieve,(in g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Flakiness Index (F.I.) =

Name of Test : Elongation Index of Coarse Aggregate

Elongation Index

Passing Wt. of fraction Wt. of agg. Retained on


Sr. Retained on IS
through IS consisting of at least each slot of elongation
No. sieve (mm)
Sieve (mm) 200 pieces (g) gauge (g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Elongation Index (E.I.) =

Combined Flakiness & Elongation Index = __________________

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 31


Flakiness & Elongation Index Test-III

Name of Test : Flakiness Index of Coarse Aggregate


Date of Test :
Flakiness Index

Wt. of Wt. of
Passing Retained %age Weight Fraction
Total No. of pieces
Sr. through on IS of sample of Total Weighted
pieces in passing
No. IS Sieve sieve passing sample %age
each sieve, respective
(mm) (mm) respective sieve seived
(in g) sieve,(in g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Flakiness Index (F.I.) =

Name of Test : Elongation Index of Coarse Aggregate

Elongation Index

Passing Wt. of fraction Wt. of agg. Retained on


Sr. Retained on IS
through IS consisting of at least each slot of elongation
No. sieve (mm)
Sieve (mm) 200 pieces (g) gauge (g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Elongation Index (E.I.) =

Combined Flakiness & Elongation Index = __________________

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 32


Flakiness & Elongation Index Test-IV

Name of Test : Flakiness Index of Coarse Aggregate


Date of Test :
Flakiness Index

Wt. of Wt. of
Passing Retained %age Weight Fraction
Total No. of pieces
Sr. through on IS of sample of Total Weighted
pieces in passing
No. IS Sieve sieve passing sample %age
each sieve, respective
(mm) (mm) respective sieve seived
(in g) sieve,(in g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Flakiness Index (F.I.) =

Name of Test : Elongation Index of Coarse Aggregate

Elongation Index

Passing Wt. of fraction Wt. of agg. Retained on


Sr. Retained on IS
through IS consisting of at least each slot of elongation
No. sieve (mm)
Sieve (mm) 200 pieces (g) gauge (g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Elongation Index (E.I.) =

Combined Flakiness & Elongation Index = __________________

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 33


Flakiness & Elongation Index Test-V

Name of Test : Flakiness Index of Coarse Aggregate


Date of Test :
Flakiness Index

Wt. of Wt. of
Passing Retained %age Weight Fraction
Total No. of pieces
Sr. through on IS of sample of Total Weighted
pieces in passing
No. IS Sieve sieve passing sample %age
each sieve, respective
(mm) (mm) respective sieve seived
(in g) sieve,(in g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Flakiness Index (F.I.) =

Name of Test : Elongation Index of Coarse Aggregate

Elongation Index

Passing Wt. of fraction Wt. of agg. Retained on


Sr. Retained on IS
through IS consisting of at least each slot of elongation
No. sieve (mm)
Sieve (mm) 200 pieces (g) gauge (g)

1 25 20
2 20 16
3 16 12.5
4 12.5 10
5 10 6.3
Total
Elongation Index (E.I.) =

Combined Flakiness & Elongation Index = __________________

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 34


Water Absorption of Aggregate-I

Date of Test :
Size of Agg :
Weight of saturated Water Absorption (%)
Weight of Oven
Sr.No. Sample No. surface dry sample 𝑩−𝑨
dried sample A(g) 𝑨
× 100
B (g)

1 I
2 II
3 III
Average Water Absorption (%)

Tested By: J.E. A.E. E.E.

Water Absorption of Aggregate-II

Date of Test :
Size of Agg :
Weight of saturated Water Absorption (%)
Weight of Oven
Sr.No. Sample No. surface dry sample 𝑩−𝑨
dried sample A(g) 𝑨
× 100
B (g)

1 I
2 II
3 III
Average Water Absorption (%)

Tested By J.E. A.E. E.E.

Water Absorption of Aggregate -III

Date of Test :
Size of Agg :
Weight of saturated Water Absorption (%)
Weight of Oven
Sr.No. Sample No. surface dry sample 𝑩−𝑨
dried sample A(g) × 100
B (g) 𝑨

1 I
2 II
3 III
Average Water Absorption (%)

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 35


Water Absorption of Aggregate-IV

Date of Test :
Size of Agg :
Weight of saturated Water Absorption (%)
Weight of Oven
Sr.No. Sample No. surface dry sample 𝑩−𝑨
dried sample A(g) 𝑨
× 100
B (g)

1 I
2 II
3 III
Average Water Absorption (%)

Tested By: J.E. A.E. E.E.

Water Absorption of Aggregate -V

Date of Test :
Size of Agg :
Weight of saturated Water Absorption (%)
Weight of Oven
Sr.No. Sample No. surface dry sample 𝑩−𝑨
dried sample A(g) 𝑨
× 100
B (g)

1 I
2 II
3 III
Average Water Absorption (%)

Tested By J.E. A.E. E.E.

Water Absorption of Aggregate -VI

Date of Test :
Size of Agg :
Weight of saturated Water Absorption (%)
Weight of Oven
Sr.No. Sample No. surface dry sample 𝑩−𝑨
dried sample A(g) × 100
B (g) 𝑨

1 I
2 II
3 III
Average Water Absorption (%)

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 36


Name of Test: Gradation of FineAgg. (Sand) & Determination of F.M.

Test-I

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

Test-II

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 37


Name of Test: Gradation of Fine Agg. (Sand) & Determination of F.M.

Test-III

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

Test-IV

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 38


Name of Test: Gradation of Fine Agg. (Sand) & Determination of F.M.

Test-V

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

Test-VI

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 39


Name of Test: Gradation of Fine Agg. (Sand) & Determination of F.M.

Test-VII

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

Test-VIII

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 40


Name of Test: Gradation of Fine Agg. (Sand) & Determination of F.M.

Test-IX

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

Test-X

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 41


Name of Test: Gradation of Fine Agg. (Sand) & Determination of F.M.

Test-XI

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

Test-XII

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 42


Name of Test: Gradation of Fine Agg. (Sand) & Determination of F.M.

Test-XIII

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

Test-XIV

Date of test: _______________________ Location…………………………

Sr. Weight retained %age Cumulative


Sieve size(mm) %age passed
No. (g) retained %age retained
1 10
2 4.75
3 2.36
4 1.18
5 0.600
6 0.300
7 0.150
8 Pan
Total
Fineness Modulus: Zone:

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 43


Test Report-I

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

Test Report-II

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

Test Report-III

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 44


Test Report-IV

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

Test Report-V

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

Test Report-VI

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 45


Test Report-VII

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

Test Report-VIII

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

Test Report-IX

Name of Test : Determination of silt content of sand.


Date of Test :
Sr.No. Sample
I II
1 Volume of sample(V1) ml
2 Volume of silt (V2) ml
3 %age of silt by volume (V2/V1)X100
4 Average value in percentage

Tested By J.E. A.E. E.E.

QC Register (Concrete works) 46


Name of Test: Slump Test for Concrete

Sr.
Date of Test Time of Test Slump (mm)
No. Tested By J.E. A.E.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46

QC Register (Concrete works) 47


47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95

QC Register (Concrete works) 48


Name of Test: Compressive Strength of CC Cube (15mm size)

Sr. Date of Date of Age Compressive Average Comp. Signature


No. Casting Testing in Load on Comp. Strength
Days Specimen (kN) Load (kN) (N/mm2)
1

10

11

12

13

14

15

QC Register (Concrete works) 49


Sr. Date of Date of Age Compressive Average Comp. Signature
No. Casting Testing in Load on Comp. Strength
Days Specimen (kN) Load (kN) (N/mm2)
16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

QC Register (Concrete works) 50


Sr. Date of Date of Age Compressive Average Comp. Signature
No. Casting Testing in Load on Comp. Strength
Days Specimen (kN) Load (kN) (N/mm2)
32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

QC Register (Concrete works) 51


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-I

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-II

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 52


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-III

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-IV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 53


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-V

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-VI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 54


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-VII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-VIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 55


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-IX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-X

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 56


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 57


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XIV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 58


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XVI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 59


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XVII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XVIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 60


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XIX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 61


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XXI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XXII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 62


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XXIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XXIV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 63


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XXV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XXVII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 64


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XXVII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XXVIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 65


Name of Test: Gradation Analysis for Granular Sub Base material (GSB)

Test-XXIX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1 75.0 100
2 26.5 55-75
3 4.75 10-30
4 0.075 < 10
5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XXX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.

1 75.0 100
2 26.5 55-75
3 4.75 10-30

4 0.075 < 10

5 PAN ---

6 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 66


Name of Test: Gradation Analysis for

Test-I

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-II

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 67


Name of Test: Gradation Analysis for

Test-III

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-IV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 68


Name of Test: Gradation Analysis for

Test-V

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-VI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 69


Name of Test: Gradation Analysis for

Test-VII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-VIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 70


Name of Test: Gradation Analysis for

Test-IX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-X

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 71


Name of Test: Gradation Analysis for

Test-XI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 72


Name of Test: Gradation Analysis for

Test-XIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XIV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 73


Name of Test: Gradation Analysis for

Test-XV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XVI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 74


Name of Test: Gradation Analysis for

Test-XVII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XVIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 75


Name of Test: Gradation Analysis for

Test-XIX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 76


Name of Test: Gradation Analysis for

Test-I

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-II

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 77


Name of Test: Gradation Analysis for

Test-III

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-IV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 78


Name of Test: Gradation Analysis for

Test-V

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-VI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 79


Name of Test: Gradation Analysis for

Test-VII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-VIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 80


Name of Test: Gradation Analysis for

Test-IX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-X

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 81


Name of Test: Gradation Analysis for

Test-XI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 82


Name of Test: Gradation Analysis for

Test-XIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XIV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 83


Name of Test: Gradation Analysis for

Test-XV

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XVI

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 84


Name of Test: Gradation Analysis for

Test-XVII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XVIII

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 85


Name of Test: Gradation Analysis for

Test-XIX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

Test-XX

Date of test: _______________________ Location…………………………

Cumulative Required
IS sieve Weight %age weight %age
Sr.No. %age wt. passing %
size (mm) retained (g) retained passing
retained age.
1
2
3
4
5
6

Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 86


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-I

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-II

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 87


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-III

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-IV

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 88


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-V

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-VI

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 89


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-VII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-VIII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 90


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-IX

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-X

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 91


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XI

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 92


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XIII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XIV

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 93


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XV

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XVI

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 94


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XVII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XVIII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 95


Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XIX

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BM)

Test-XX

Date of test: _______________________ Location…………………………

Required
Cumulative
Sr. Sieve Weight %age passing %
%age retained %age
No. size(mm) retained (g) passed age.
retained
1 26.50 100
2 19.00 90-100
3 13.20 56-88
4 4.75 16-36
5 2.36 4-19
6 0.300 2-10
7 0.075 0-8
8 pan
9 Total
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 96


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-I

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-II

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 97


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-III

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-IV

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 98


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-V

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-VI

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 99


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-VII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-VIII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 100


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-IX

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-X

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 101


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XI

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 102


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XIII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XIV

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 103


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XV

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XVI

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 104


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XVII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XVIII

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 105


Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XIX

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

Name of Test: Gradation Analysis for Coarse Aggregate (BC)

Test-XX

Date of test: _______________________ Location…………………………

Required
Cumulative
Sieve Weight %age %age passing %
Sr.No. %age
size(mm) retained (g) retained passed age.
retained
1 19.0 100
2 13.2 90-100
3 9.5 70-88
4 4.75 53-71
5 2.36 42-58
6 1.18 34-48
7 0.600 26-38
8 0.300 18-28
9 0.150 12-20
10 0.075 4-10
11 pan
Instruction for Blending:

Tested By: J.E. A.E. E.E.

QC Register (Concrete works) 106


Name of Test: Binder Content (BM)

Sr. Date of Test Before Extraction After Extraction Wt. of Tested By Checked
No. Wt. of Wt. of Wt. of filter Wt. of Wt. of Wt. Of Bitumen Binder By
sample Filter paper after Aggregate in Agg. On Total Content
Paper extraction Bowl after Filter Agg. (%)
Ext. Paper
after Ext.

QC Register (Concrete works) 107


Name of Test: Binder Content (BM)

Sr. Date of Test Before Extraction After Extraction Wt. of Tested By Checked
No. Wt. of Wt. of Wt. of filter Wt. of Wt. of Wt. Of Bitumen Binder By
sample Filter paper after Aggregate in Agg. On Total Content
Paper extraction Bowl after Filter Agg. (%)
Ext. Paper
after Ext.

QC Register (Concrete works) 108


Name of Test: Binder Content (BC)

Sr. Date of Test Before Extraction After Extraction Wt. of Tested By Checked
No. Wt. of Wt. of Wt. of filter Wt. of Wt. of Wt. Of Bitumen Binder By
sample Filter paper after Aggregate in Agg. On Total Content
Paper extraction Bowl after Filter Agg. (%)
Ext. Paper
after Ext.

QC Register (Concrete works) 109


Name of Test: Binder Content (BC)

Sr. Date of Test Before Extraction After Extraction Wt. of Tested By Checked
No. Wt. of Wt. of Wt. of filter Wt. of Wt. of Wt. Of Bitumen Binder By
sample Filter paper after Aggregate in Agg. On Total Content
Paper extraction Bowl after Filter Agg. (%)
Ext. Paper
after Ext.

QC Register (Concrete works) 110


Space for other Test, if Any

QC Register (Concrete works) 111


Space for other Test, if Any

QC Register (Concrete works) 112


Space for other Test, if Any

QC Register (Concrete works) 113


Space for other Test, if Any

QC Register (Concrete works) 114


QC Register (Concrete works) 115
Space for other Test, if Any

QC Register (Concrete works) 116


Space for other Test, if Any

QC Register (Concrete works) 117


QC Register (Concrete works) 118
Space for other Test, if Any

QC Register (Concrete works) 119


Space for other Test, if Any

QC Register (Concrete works) 120


QC Register (Concrete works) 121
Space for other Test, if Any

QC Register (Concrete works) 122


Space for other Test, if Any

QC Register (Concrete works) 123


QC Register (Concrete works) 124
Space for other Test, if Any

QC Register (Concrete works) 125


QC Register (Concrete works) 126
Space for other Test, if Any

QC Register (Concrete works) 127


Space for other Test, if Any

QC Register (Concrete works) 128


QC Register (Concrete works) 129
Space for other Test, if Any

QC Register (Concrete works) 130


Space for other Test, if Any

QC Register (Concrete works) 131


QC Register (Concrete works) 132
Space for other Test, if Any

QC Register (Concrete works) 133


Space for other Test, if Any

QC Register (Concrete works) 134


QC Register (Concrete works) 135
Space for other Test, if Any

QC Register (Concrete works) 136

Das könnte Ihnen auch gefallen