Beruflich Dokumente
Kultur Dokumente
UR11.2
ZXSDR BS8908 Product Description
Dong
V1.00 2012/3/5 Not open to the third party
Chuanghong
TABLE OF CONTENTS
4 Configurations ................................................................................................. 16
FIGURES
TABLES
1 Product Overview
1.1 Introduction
With the multi-mode era coming, ZTE, who is dedicated to providing comprehensive
network solutions and delivering the future-oriented quality network for the operators,
developed the ground breaking SDR unified platform with the essential feature to support
multi-mode and multi-band radio access.
Based on this innovative SDR platform, ZTE promotes a series of base stations to satisfy
different scenario requirements, including Indoor Macro, Outdoor Macro, Distributed,
Outdoor Micro, and Mini BTS.
With the developing of mobile communication, high quality networks have to be built up
to meet growing requirements. Hot spot, indoor and rural area coverage should be taken
into consideration. At the same time, telecom operators are facing challenges in
equipment room, engineering and noise pollution. ZXSDR BS8908 (hereafter referred to
“BS8908”) compact BTS is hence designed to meet these requirements.
Integrated design and MCPA make it small volume, high density, high capacity and low
power consumption. It can be used for both indoor and outdoor applications with IP65
protection. The unit can be mounted on walls, poles or masts.
Single unit supports up to 6 TRXs by adopting MCPA technology. It can also be expanded
to S4/4/4 by cascading. BS8908 is shown in the following figure.
1.2 Benefits
BS8908 is only less than 15 kg, easy to transport and install. It can be mounted on
the pole, against the wall, on the tower top, etc. No dedicated equipment space is
required, easy for site acquisition, fast network deployment.
Green BTS
BS8908 supports Doherty, DPD and MCPA technologies in power amplifier module
which provide high PA efficiency. High efficiency MCPA, natural cooling and high
density design reduce the power consumption. Zero noise pollution makes it easy
for indoor installation and site acquisition.
Abis interface is based on FE/GE or IP over E1. It provides E1/T1 and FE/GE
interfaces for Abis connection and supports various transmissions networking such
as SDH, IP, microwaves and satellite transmission.
2 Product Architecture
By integrated design, BS8908 single unit integrates control and clock module, baseband
processing, radio unit, power management and so on. Both AC (220 V/110 V) and DC
(-48 V) power supplies are supported.
BS8908 consists of Interface Module, Control & Clock Module, Baseband Process
Module, Transceiver, Power Amplifier, Duplex and Power Module.
Power
Baseband Amplifier
GE/FE Interface
Process Duplex
Module
Module
E1/T1 Transceiver
BS8908
The interface module provides the interfaces of the system and the interface protection.
Providing 4 dry contact alarm inputs, and a RS485 port for monitoring
The control and clock module is used for control and management, and provides system
clock. Its functions are as follows:
Ethernet switching function, implementing data switching for service and control
flow within the system
Monitoring, controlling and maintaining of the base station system, providing LMT
interface
Managing software versions and supporting local and remote software upgrade
Synchronizing with various external reference clocks, including the Abis interface
recovery clock and the GPS clock.
Providing a real-time clock for system operation and maintenance; the real-time
clock can be calibrated.
It processes the physical layer protocol and frame protocol specified by 3GPP. Its main
functions are listed as follows:
Diversified receiving.
2.2.4 Transceiver
Transceiver is the radio transmitting and receiving module. Its main functions are listed
as follows:
2.2.6 Duplex
The software system of BS8908 consists of operating support layer and application layer.
GSM Functions
OMC-B OSS
Linux
Hardware (BSP)
The operating support layer provides the functions of OSS, OAM, DBS, BRS, BRACS,
and SCS to serve different BTS modes.
OSS (Operation Support Sub-system) is the support layer in this framework, which is a
hardware independent platform for running software and providing basic functions like
scheduling, timer, memory management, communication, sequencing control, monitoring,
alarming and logging.
BSP (Board Support Package) supports the information routing to the GSM and public
parts in the application layer.
2.4 Functionality
BS8908 accomplishes the following basic functions with Um, Abis and O&M interfaces.
With Abis interface, BS8908 connects with BSC and accomplishes the following
functions, including cell management, reporting BTS measurement information,
broadcasting system Information, implementing access control from BSC, mobility
management, radio resource management and controlling and FP processing
management.
The receiving part adopts Viterbi algorithm for coding. Channel decoding capability
and system receiving sensitivity is improved.
Supports DTX sending and decreasing transmitting power, lowering the total
interference in the air.
Supports BSS local switch; the voice data frame will switch in BSS and will not go to
core network.
Supports dynamic power sharing; output power of MCPA can be shared by multi
carriers in multi-carrier BTS.
Supports intelligent cell shutdown to shut down some cells of the base station in
case of the traffic is very low.
GSM/EDGE:
GPRS/EDGE/E-EDGE
3 Technical Specifications
Output Power
40W (GMSK) / 25W (8PSK)
(TOC)
Static Receiving
-112 dBm @ Single Antenna
Sensitivity
Power supply,
Power DC: -48 V (-37 V - -60V DC)
voltage range of
Indices AC: 110 V/220 V (90 V - 290 V AC)
variation
Waterproof
IP65
/Dustproof
Environment
Indices Heat Dissipation Natural Cooling
≤5 Ω
Earth resistance can be less 10 Ω in thunder
Ground
less area where thunderstorm days should be
less than 20 per year.
YD/T 1595.2-2007
National/ ETSI EN 301 489-01, ETSI EN 301 489-23
EMC Indices International ETSI EN 300 386–V1.3.2
Standard (CISPR22) Class B
Directive 1999/5/EC (R&TTE)
MTTR 1 hours
Reliability
DC: ≥99.999576%
Indices Availability
AC: ≥99.999565%
Interface
Interface Item Index Standard
Type
1 (10M/100M/1000M
electrical) 10/100/1000BASE-T
RJ45
Auto-Negotiation IEEE 802.3 compatible
Auto-MDI/MDIX
Ethernet
1000BASE-LX IEEE
1 (1000M optical) or 802.3 compatible
SFP (LC)
1 (100M optical) 100BASE-FX IEEE
802.3 compatible
Antenna
ANT 2 N -
Feeder
Cascade
SFP 2 SFP(LC) -
Interface
Dry
Monitor & 4 DB15 -
Contact
Alarm
RS485 1 DB15 -
Electrical
AISG 1 DB9 AISG 2.0
Antenna
4 Configurations
Single unit supports 1 TRX to 6 TRXs by software configuration. It is convenient to
expand by cascading. Star and chain connection are supported for flexible networking
topology.
Number of
Site Type Number of X-polar Antenna
BS8908
O1-O6 1 1
S11-S66 2 2
S111-S444 3 3
BSC Abis
BS8908
BB Base Band
CN Core Network
CS Circuit Switch
DL Down Link
FE Fast Ethernet
FP Frame Protocol
FR Full Rate
GE Gigabit Ethernet
HR Half Rate
PS Packet Switch
RF Radio Frequency
TA Time Advance
UL Up Link