Beruflich Dokumente
Kultur Dokumente
TEJAS C.PATIL
Introduction
• FORMWORK :-
• Lesser number of joints thereby reducing the leakages and enhancing the
durability.
• Higher carpet area- Due to shear walls the walls are thin thus increasing area.
• Integral and smooth finishing of wall and slab- Smooth finish of aluminum can be
seen vividly on walls.
• Uniform quality of construction – Uniform grade of concrete is
used.
INTRODUCTION
• MIVAN is the brand name from Mivan Far East,
Malaysia. It is Aluminum alloy Form work The
Aluminum formwork system for concreting is
probably the most versatile modern construction
system. Unlike other systems it is equally suited
to both high and low rise construction specifically
designed to allow the rapid construction of
multiple unit projects at optimum productivity.
WALL PANEL: The Wall Panel forms the face of the wall from
the top of the Rocker to the underside of the Top Panel.
ROCKER: The Rocker forms the wall face at the bottom of the wall panels and
helps to facilitate striking.
KICKER: The kicker forms the wall Face at the top of the Top
Panels. It is anchored to the concrete and acts as a ledge for
the Wall panels on the next floor to sit on.
BEAM SOFFIT BULKHEAD: The Beam Soffit Bulkhead is used to
form the soffit of the beam. It is used for beams less than 300mm.
DECK COMPONENT: The deck panel rests between pairs of
mid-beams and provides a horizontal surface for casting the
slabs and provides a horizontal surface for casting the slabs.
INTERNAL SOFFIT CORNER: The Internal Soffit Corner forms
the vertical corner between walls and / or beam faces and
horizontal internal corners between wall / beam face and soffit
of slabs.
INTERNAL CORNER:
The Internal Corner connects
2 pieces of vertical formwork
together of their internal
intersection.
PROP LENGTH:
The prop length is
manufactured to a
specific length for each
project. It transmits load
to the previous slab.
PANEL PULLER: It is required for removing panels after concreting of wall.
TIE PULLER: It is required for removing wall Ties after de shuttering of panels.
BEAM – BAR:
These are used in pairs to
fix the Mid Beam and End
Beams to the deck prop.
The beam_ Bar is removed
when the slab is cast to
allow quick striking of the
deck form work.
• Project Name - Amanora Park Town.
• Location - Hadapsar,Pune.
CASE
• Size Of Project - 78,000 m . 2
STUDY
• Project Cost - Rs. 650 million.
• Client - City Development Corp.
• Consultant - P & T, J & W Consultant.
• Cycle - 11 days per floor.
• Storey - 22 Storey.
• System Of Formwork- 6000 sq.mt.
• Year Of Completion - On Going.
CONCLUSION
The task of housing due to the rising population of the country is becoming
increasingly monumental. In terms of technical capabilities to face this
challenge, the potential is enormous; it only needs to be judiciously exploited.
Traditionally, construction firms all over the world have been slow to adopt the
innovation and changes. Contractors are a conservative lot. It is the need of
time to analyze the depth of the problem and find effective solutions. Our aim
is to serves as a cost effective and efficient tool to solve the problems of the
mega housing project all over the world. Our aim is to maximize the use of
modern construction techniques and equipments on its entire project. We
have tried to cover each and every aspect related to conventional and
aluminum form construction. We thus infer that aluminum form construction
is able to provide high quality construction at unbelievable speed and at
reasonable cost. This technology has great potential for application in India to
provide affordable housing to its rising population. Thus it can be concluded
that quality and speed must be given due consideration with regards to
economy. Good quality construction will never deter to projects speed nor will
it be uneconomical. In fact time consuming repairs and modification due to
poor quality work generally delay the job and cause additional financial impact
on the project. Some experts feel that housing alternatives with low
maintenance requirements may be preferred even if at the slightly may
preferred even if at the higher initial cost.
FUTURE SCOPES