Beruflich Dokumente
Kultur Dokumente
This
parameter is
used for NRT
when 10 ms
TTI is used
on E-DCH.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst2 NRT burst2 rs Resource parameter
10ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 2
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used for NRT
when 10 ms
TTI is used
on E-DCH.
This
parameter is
used for NRT
when 2 ms
TTI is used
on E-DCH.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst2 NRT burst2 rs Resource parameter
2ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 2
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used for NRT
when 2 ms
TTI is used
on E-DCH.
This
parameter is
used for
streaming
when 10 ms
TTI is used
on E-DCH.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst2 Str burst2 rs Resource parameter
10ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 2
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used for
streaming
when 10 ms
TTI is used
on E-DCH.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst1 Str burst1 rs Resource parameter
2ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 1
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used for
streaming
when 2 ms
TTI is used
on E-DCH.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst2 Str burst2 rs Resource parameter
2ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 2
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used for
streaming
when 2 ms
TTI is used
on E-DCH.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst1 Voi burst1 rs Resource parameter
10ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 1
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used when
10 ms TTI is
used on E-
DCH with CS
voice over
HSPA
feature.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst2 Voi burst2 rs Resource parameter
10ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 2
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used when
10 ms TTI is
used on E-
DCH with CS
voice over
HSPA
feature.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst1 Voi burst1 rs Resource parameter
2ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 1
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used when 2
ms TTI is
used on E-
DCH with CS
voice over
HSPA
feature.
UE DPCCH UE DPCCH Enumeration PSParamete Radio 1 The
burst2 Voi burst2 rs Resource parameter
2ms TTI Utilisation defines the
UL DPCCH
burst length
in subframes
when UE
DTX Cycle 2
is applied.
This is part
of DPCCH
Gating (UL
DTX)
subfeature.
This
parameter is
used when 2
ms TTI is
used on E-
DCH with CS
voice over
HSPA
feature.
DPCCH DPCCH Number PSParamete Radio 1 This
Power offset Power offset rs Resource parameter
for for Utilisation defines the
secondary secondary power offset
UL frequency UL frequency between the
initial
DPCCH
power level
on secondary
UL frequency
when it is
activated,
and the
current
DPCCH
power level
on primary
UL
frequency.
The 0 dB
means that
the UE will
use the
current
DPCCH
power level
on primary
UL frequency
as the initial
DPCCH
power level
Change Enumeration Operation 1 The
origin and parameter
Maintenance defines the
origin of the
last
configuration
action
affecting the
object
When the
value of the
parameter is
set to 1 ,
CCHSetup is
enabled for
the cell.
Margin for Number PSParamete Radio 1 The
FACH load rs Resource parameter
for downlink Utilisation defines the
channel type margin for
selection the total
throughput of
SCCPCH
(FACH/PCH)
for downlink
channel type
selection.
When the
measured
load is below
the threshold
by at least
this margin,
FACH usage
is possible.
Threshold for Number PSParamete Radio 1 The
FACH load rs Resource parameter
for downlink Utilisation defines the
channel type threshold for
selection the total
throughput of
SCCPCH
(FACH/PCH)
channel for
downlink
channel type
selection. If
the threshold
is exceeded,
DCH or HS-
DSCH is
allocated.
Measuremen
t is used for
the channel
type
selection for
the SRB in
the RRC
connection
setup phase
and for the
NRT RB in
the RRC
state
CELL_FACH
.
Maximum E- NBAP: Enumeration ACConfigura Radio 1 This
DCH Maximum E- tion Resource parameter
resource DCH Utilisation determines
alloc time for resource the
CCCH for allocation for maximum E-
HS-RACH CCCH DCH
resource
allocation for
CCCH. The
time has
been defined
as the terms
Maximum Number ACConfigura Radio 1 This
number of tion Resource parameter
HS-SCCH Utilisation defines the
codes maximum
number of
HS-SCCH
codes (SF
128) that can
be reserved
in one cell.
More than
one HS-
SCCH code
can be used
if the HSDPA
code
multiplexing
functionality
is in use.
The actual
number of
reserved
codes
depends on
for example
HSDPA
capabilities
and HSDPA
code
multiplexing
HS-PDSCH HS-PDSCH Number PCConfigura Radio 1 This
Power of HS- Power tion Resource parameter
FACH for Utilisation defines the
BCCH transmission
power of the
High Speed
Physical
Downlink
Shared
Channel (HS-
PDSCH) of
HS-FACH for
BCCH. HS-
PDSCH
power level
is relalative
to the
primary
CPICH
power
configured in
a cell.
HS-SCCH HS-SCCH Number PCConfigura Radio 1 This
Power of HS- Power tion Resource parameter
FACH for Utilisation defines the
BCCH transmission
power of the
High Speed
Shared
Control
Channel (HS-
SCCH) of HS-
FACH for
BCCH. HS-
SCCH power
level is
relalative to
the primary
CPICH
power
configured in
a cell.
Margin for Number PSParamete Radio 1 The margin
total rs Resource for the total
downlink Utilisation downlink
transmission transmission
power for power for
downlink downlink
channel type channel type
selection selection.
When the
measured
load is below
the threshold
by this
margin,
FACH usage
is possible.
The power E-AGCH Number PCConfigura Radio 1 This
offset of the Power Offset tion Resource parameter
E-AGCH Utilisation defines the
transmission
power of the
E-DCH
Absolute
Grant
Channel. E-
AGCH power
is defined in
relation to
the pilot bits
on the DL
DPCCH
except when
Fractional
DPCH (F-
DPCH) is
configured.
When F-
DPCH is
configured,
the E-AGCH
power is
defined in
relation to
the power of
transmitted
TPC bits on
the F-DPCH.
The power E-HICH Number PCConfigura Radio 1 This
offset of the Power Offset tion Resource parameter
E-HICH Utilisation defines the
transmission
power of the
E-DCH
HARQ
Acknowledge
ment
Indicator
Channel. E-
HICH power
is defined in
relation to
the pilot bits
on the DL
DPCCH
except when
Fractional
DPCH (F-
DPCH) is
configured.
When F-
DPCH is
configured,
the E-HICH
power is
defined in
relation to
the power of
transmitted
TPC bits on
The power E-RGCH Number PCConfigura Radio 1 This
offset of the Power Offset tion Resource parameter
E-RGCH Utilisation defines the
transmission
power of the
E-DCH
Relative
Grant
Channel. E-
RGCH power
is defined in
relation to
the pilot bits
on the DL
DPCCH
except when
Fractional
DPCH (F-
DPCH) is
configured.
When F-
DPCH is
configured,
the E-RGCH
power is
defined in
relation to
the power of
transmitted
TPC bits on
the F-DPCH.
Threshold for Number PSParamete Radio 1 This
total rs Resource parameter
downlink Utilisation defines the
transmission threshold for
power for the total
downlink downlink
channel type transmission
selection power for
downlink
channel type
selection. If
the threshold
is exceeded,
a DCH/HS-
DSCH is
allocated.
Measuremen
t is used for
the channel
type
selection for
the SRB in
the RRC
connection
setup phase
and for the
NRT RB in
the RRC
state
CELL_FACH
. Assumption
Margin for Number PSParamete Radio 1 heremargin
The is that a
RACH load rs Resource for the RACH
for downlink Utilisation load for
channel type downlink
selection channel type
selection.
When the
measured
load is below
the set
threshold by
this margin,
FACH usage
is possible.
Threshold for Number PSParamete Radio 1 The
RACH load rs Resource parameter
for downlink Utilisation defines the
channel type threshold for
selection the RACH
load for
downlink
channel type
selection. If
the threshold
is exceeded,
a DCH or HS-
DSCH is
allocated.
Measuremen
t is used for
the channel
type
selection for
the SRB in
the RRC
connection
setup phase
and for the
NRT RB in
the RRC
state
CELL_FACH
. The RACH
load is
measured as
SIR target Number ACConfigura Radio 1 the average
This
offset for tion Resource parameter
DPCCH with Utilisation defines the
E-DPCH offset value
for the
DPCCH SIR
when the
radio link has
an E-DCH
configured.
The BTS
adds the
parameter
value to the
result of the
measured
DPCCH SIR
value when it
is used in UL
load
estimations
for E-DCH
resource
scheduling.
Time of Time of Number Telecom 1 This
Arrival Arrival parameter
Window Window defines the
Endpoint for Endpoint; ending point
common ToAWE of the
channels receiving
window. DL
data frames
are expected
to be
received
before this
window
endpoint.
This
parameter is
for common
channels
FACH and
PCH.
Time of Time of Number Telecom 1 This
Arrival Arrival parameter
Window Window defines the
Startpoint for Startpoint; starting point
common ToAWS for the
channels receiving
window
supported by
BTS. DL
data frames
are expected
to be
received
after this
window start
point. This
parameter is
for common
channels
FACH and
PCH.
Max nbr of Number ACConfigura Radio 1 This
conv users tion Resource parameter
per reserved Utilisation defines the
HS-SCCH maximum
code number of
simultaneous
HSPA
conversation
al users that
are admitted
per one
reserved HS-
SCCH code.
Users
counted here
are CS voice
over HSPA
users.
The
maximum
number of
HS-SCCH
codes is
defined with
the
parameter
WCEL-
MaxNbrOfHS
SCCHCodes.
BCCH BCCH Number HCConfigura Radio 1 This
ARFCN ARFCN tion Resource parameter
Utilisation contains the
absolute RF
channel
number of
the
Broadcast
Control
Channel
(BCCH) of
the GSM
neighbour
cell.
Initial SIR Structure ACConfigura Radio 1 This
target for UL tion Resource parameter
DPCCH with Utilisation defines the
DPDCH initial SIR
target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction.
The value of
the
parameter is
used in the
configuration
of the SIR
target for the
uplink outer
loop power
controller of
the RNC and
in the
estimation of
the DPCCH
overhead for
the DCH
resource
allocation.
UL SIR Number ACConfigura Radio 1 This
target without tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
128 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
128. One-
way receiver
diversity is
assumed. HS-
DPCCH must
not be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all the
UL SIR Number ACConfigura Radio 1 This
target without tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
16 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
16. One-way
receiver
diversity is
assumed. HS-
DPCCH must
not be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all the
UL SIR Number ACConfigura Radio 1 This
target without tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
256 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
256. One-
way receiver
diversity is
assumed. HS-
DPCCH must
not be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target without tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
32 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
32. One-way
receiver
diversity is
assumed. HS-
DPCCH must
not be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target without tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF 4 initial SIR
target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is 4.
One-way
receiver
diversity is
assumed. HS-
DPCCH must
not be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target without tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
64 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
64. One-way
receiver
diversity is
assumed. HS-
DPCCH must
not be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target without tion Resource parameter
HS-DPCCH Utilisation defines the
and DPDCH initial SIR
SF 8 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is 8.
One-way
receiver
diversity is
assumed. HS-
DPCCH must
not be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target with tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
128 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
128. One-
way receiver
diversity is
assumed. HS-
DPCCH must
be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target with tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
16 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
16. One-way
receiver
diversity is
assumed. HS-
DPCCH must
be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target with tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
256 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
256. One-
way receiver
diversity is
assumed. HS-
DPCCH must
be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target with tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
32 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
32. One-way
receiver
diversity is
assumed. HS-
DPCCH must
be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target with tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF 4 initial SIR
target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is 4.
One-way
receiver
diversity is
assumed. HS-
DPCCH must
be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target with tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF initial SIR
64 target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is
64. One-way
receiver
diversity is
assumed. HS-
DPCCH must
be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
UL SIR Number ACConfigura Radio 1 This
target with tion Resource parameter
HS-DPCCH - Utilisation defines the
DPDCH SF 8 initial SIR
target for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the minimum
spreading
factor of UL
DPDCH is 8.
One-way
receiver
diversity is
assumed. HS-
DPCCH must
be
configured in
the radio link.
To modify
this
parameter,
you must
manually
lock and later
unlock all
Maximum Number ACConfigura Radio 1 This
SIR target for tion Resource parameter
UL DPCCH Utilisation defines the
with DPDCH maximum
only SIR target
value for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction.
The
maximum
value of the
SIR target is
achieved by
adding the
value of the
parameter to
the initial SIR
target value.
To modify
this
parameter,
you must
manually
lock and later
unlock all
WCEL
Minimum Number ACConfigura Radio 1 This
SIR target for tion Resource parameter
UL DPCCH Utilisation defines the
with DPDCH minimum
only SIR target
value for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction.
The
minimum
value of the
SIR target is
achieved by
adding the
value of the
parameter to
the initial SIR
target value.
To modify
this
parameter,
you must
manually
lock and later
unlock all
WCEL
Minimum Number ACConfigura Radio 1 This
SIR target for tion Resource parameter
UL DPCCH Utilisation defines the
with DPDCH minimum
only for SIR target
Superior value for the
Voice Quality UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the cell
transmission
power is
below the
PtxTarget +
AMRTargetT
xTotal/AMRT
argetTxNC/A
MRTargetTx
NonHSPA
level. The
minimum
value of the
SIR target is
achieved by
adding the
value of the
parameter to
SIR target for Number ACConfigura Radio 1 This
UL outerloop tion Resource parameter
power control Utilisation defines the
with DPDCH initial SIR
target offset
for the UL
outer loop
power control
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction. If
the initial SIR
target value
is sent to the
BTS and to
the outer
loop power
controller of
the RNC, the
value of the
parameter is
added to the
produced
initial SIR
target value.
To modify
this
parameter,
SIR target for Number ACConfigura Radio 1 This
UL DPCCH tion Resource parameter
with DPDCH, Utilisation defines the
2-way Rx initial SIR
diversity target offset
value for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the two-way
receiver
diversity is
assumed.
Experienced
SIR depends
also on the
channel
conditions,
such as
propagation
environment,
multipath
conditions
and mobile
speed.
Besides the
receiver
SIR target for Number ACConfigura Radio 1 This
UL DPCCH tion Resource parameter
with DPDCH, Utilisation defines the
4-way Rx initial SIR
diversity target offset
value for the
UL DPCCH
when the
radio link has
only DCHs
configured in
the uplink
transfer
direction and
the 4-way
receiver
diversity is
assumed.
Experienced
SIR depends
also on the
channel
conditions,
such as
propagation
environment,
multipath
conditions,
and mobile
speed.
Besides the
receiver
Change Enumeration Operation 1 The
origin and parameter
Maintenance defines the
origin of the
last
configuration
action
affecting the
object.
Range and Formula for Default Default Special Related System
step Getting Value Value Notes Value Functions Information
Internal
Value
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
0: 1 1 (0) Packet
1: 2 Scheduler
2: 5
• 3GPP
Reference:
TS 25.427,
UTRAN
Iub/Iur
interface
user plane
protocol for
DCH data
streams
• 3GPP
Reference:
TS 25.433,
UTRAN Iub
Interface
NBAP
Signalling
• 3GPP
Reference:
TS 25.331,
RRC
Protocol
Specification