Beruflich Dokumente
Kultur Dokumente
ABSTRACT:
Here we are using a step down transformer to convert 230v to 12v ac. The bridge circuit is
used to convert ac to dc. The filter is used to remove the ripples from the supply. The regulator is used
to maintain the supply constant.
Here we are using an ldr circuit and buzzer for this circuit. When the cash box is in safe condition that
means when the ldr detects the darkness it make the transistor off.So the buzzer will be off .
When the cash box is opened by an unauthorized person that means the ldr is on this makes the
transistor on. This makes the relay on. So the buzzer makes the sound.
Finally when the cash opened by an unauthorized person the buzzer makes the sound.
ABSTRACT:
With the existing push in the direction of sustainable, clean sources of power, it is no surprise that solar
power has become one of the most popular alternative energy sources. Freehand available everywhere,
the power of the sun can be employed to power everything like cell phones and MP3 player. The sun’s
energy is usually harvested through solar panels that are made-up of photovoltaic cells. These cells can
covert the sun’s power into electricity that can be used for a number of puposes. For private use, a
handeled solar hybrid charger can be employed to recharge little device foe instance a MP3 player, a cell
phone, or a camera.
Charging a smartphone using a salt water battery is a very easy process. We can easily make salt
water battery using household materials. Salt water battery is a group of salt water cells. Each salt
water battery cell produces 0.7 volts 8 or 9 are able to charge a smart phone.
FOOT STEP POWER GENERATION SYSTEM FOR RURAL ENERGY APPLICATION TO RUN AC AND DC LOADS
ABSTRACT:
In this project the conversion of the force energy in to electrical energy. The control mechanism carries
the piezo electric sensor, A.C ripples neutralizer,unidirectional current controller and 12v,1.3Amp lead
acid dc rechargeable battery and an inverter is used to drive AC/dc loads. The battery is connected to
the inverter. This inverter is used to convert the 12 volt D.C to the 230 volt A.C voltage is used to
activate the loads. We are using conventional battery charging unit also for giving supply to the circuitry.
ABSTRACT: