UDC 621.862. 215.3.082.8 DEUTSCHE NORMEN July 1970
Countersunk (Flat) Head Tapping Screwe
vita Blot
Souk-Blechochreuben mit Schlite
Yor connection with an ISO Reconsendation im preparation, see Explanations.
Dimensions in as
of this tronsiation
Tyne BY vith flat end
No guarantee can be
secording to DIM 7970
‘unk (flat) head tapping ecrew vith cone ond (B), of
3:5 nu noiuel diameter and length U= 19 eat
- pping screw B 3.5 x 49 DIN 7972 _
oeimat Taneter [2.2 a5 [ Go] 42
6a
24
1
7
06
095
Waccording to W5ol 2 a{«| 7] 10
wacketed noalnel GTanotora should be avoided wierever posaibl
Normally, these tapping ecreve axe made in the sizes for vuich vetent detatle
tre given, It im noe practicable to mak
Seaeead of Le
Feshteal conditions. of dettvery and wateriat acconting to DIN 267 Sheet 12
m according to DIN 267 Sheet 2
Guroed and screy enda according to DIN 7570
Yor core hole Manotere i 755
") mece etzea connot be made in Type 8.
Explanations on page 2
“Gribti, Bevin 30 und Koln DIN 7972 engl. Preiegr.42 DIN 7972
Countersunk (fiat) head terrieg
vied ebie a je fratebey
seen dnchee ’
Tio teconseadati on
fa accuracy of 1/100 aa, The
tuey Lie within the Matte
ox | 079 | om [om | 114 1a
on [om [im | im | tar 190)
siet. 06 08 1 1 | 2 i
oe 046 | oas | 10s | 1, 126 a6
og 1 2 1st i
cs —_
ne =)
he type decter
Ube tetiee
‘Pha 1d type letter eysbols
cording to DIN = Type AB according to 160
ud according to DIN = Type B according to
et cieculatieg ae draft), Tusa draft, in turn, egre