Beruflich Dokumente
Kultur Dokumente
36 Adhesives Wood-work
37 Adhesives Wood-work
38 Adhesives Wood-work
39 Adhesives Wood-work
40 Adhesives Wood-work
41 Adhesives Wood-work
42 Adhesives Wood-work
43 Adhesives Wood-work
44 Adhesives Wood-work
45
Adhesives Wood-work
46
47 Adhesives Wood-work
48 Adhesives Wood-work
49 Adhesives Wood-work
50 Adhesives Wood-work
51 Adhesives Wood-work
52 Adhesives Wood-work
53 Adhesives Wood-work
Fevicol SH
Fevicol Marine
Fevicol Hi-Per
Fevicol HeatX
Fevicol ProBond
Fevicol ProBond
Fevicol SpeedX
Fevicol SWR+
Fevicol SWR EQ
Fevicol Membrane
Press LC
Fevicol Membrane
Press Star 2K
Fevicol BWP
M-Seal Phataphat
Epoxy Putty
M-Seal GP Epoxy
Compound Epoxy
Putty
Fevikwik Gel
Fevikwik
Areas of Application
• Best used for all lamination works, especially where laminates are thicker than 1 mm
• Effective for kitchen applications
• Best used for all kinds of lamination, especially the ones with a lot of heat exposure
• Ideal for vertical lamination applications
• Best used for sticking PVC with acrylic laminate, PVC Beading with plywood, or PVC Beading with
medium-density fiberboard
• Best used for sticking PVC with acrylic laminate, PVC Beading with plywood, or PVC Beading with
medium-density fiberboard
• Recommended for use in time-bound projects and on sites with large quantum of laminate
pasting
• Used for bonding plywood, wood, particle board, hard board, laminates, veneers, and medium-
density fiberboard with each other
• Recommended for use in sticking laminates at places where it is difficult to paste with hands
•Perfect for laminated doors and High Density Fiberboard (HDF) skin doors
•Preferred for surface lamination in making modular furniture and kitchens
•Suitable in hot press, cold press, roller press, as well as manual stacking
•Applicable for PVC foil to wooden substrate bonding while making PVC membrane doors
•Applicable for PVC foil to wooden substrate bonding while making PVC membrane kitchen
shutters
•Suitable for profile wrapping
•This is a multipurpose, two-component epoxy putty that sets quickly. It is ideal for gripping,
joining, sealing, and insulating a variety of surfaces like metal, porcelain, marble, wood, and glass
This easy-to-use, multipurpose, two-component epoxy putty especially used for several sealing,
gripping, joining, and insulating tasks on various surfaces like granite, ivory, ceramic, leather, and
metal.
This specially formulated epoxy compound is perfect for gaps and leakages. This two-part
compound blends into a soft mixture that sets at room temperature. It's especially used for
electrical insulation, sanitary fitting joints, and joining and gap-filling applications
This is a regular-bodied, advanced solvent cement that has medium viscosity and high coverage. It
is ideal for industrial and domestic plumbing. It can be used for bonding PVC sheet in door
manufacturing and other industrial application.
For joining any Soil Waste and Rainwater PVC pipes in drainages, sewage, household plumbing,
and industries, you may rely on the PV Seal PVC Solvent Cement – Heavy. It is the perfect way to
avoid leaking pipes.
PV Seal CPVC Solvent Cement takes care of all your CPVC joining needs. With its quick bonding
and superior gap filling abilities, the advanced solvent cement offers excellent results. It does not
drip down, thus ensuring low wastage.
Multi-Substrate
•Edge banding with PVC tapes
•Key hole locks
•Metal plate for magnetic shutter hardware
•Acrylic with wood combination
•Decorative Works
•Aluminium strips on wood
•Ideal on acrylic/ wooden sheet
•Wooden beading patti on Mica
•Name plates
•Helps in alignment before screwing hinge, locks, channels
•Door hinges alignment before screwing
•Handles of any door/ shutter before screwing
•Aluminium basket alignment on wooden drawer before screwing
•Instant repair of all types of carpentry work
•Chipped/ broken laminate fixing
•De-bonded mica joints
•Wallpaper peel-off repair
FEVIKWIK is suitable for bonding plastics, metal and rubber components. It can be also used to
lock components which are already assembled. It has typical applications in molded furniture, sign
boards, gift articles. It is also used for wide range of industrial applications.
Available in packs of Product type
50 g
125 g
250 g
500 g
1 kg Core
2 kg Core
5 kg Core
10 kg Core
20 kg Core
30 kg Core
50 kg Core
500 g Core
1 kg Core
2 kg Core
5 kg Core
10 kg Core
20 kg Core
30 kg Core
50 kg Core
500 g Core
1 kg Core
2 kg Core
5 kg Core
10 kg Core
20 kg Core
30 kg Core
50 kg Core
100 ml Core
200 ml Core
500 ml Core
1 liter Core
2 liter Core
5 liter Core
500 g Core
1 kg Core
5 kg Core
1 kg Core
2 kg Core
5 kg Core
10 kg Core
20 kg Core
30 kg Core
50 kg Core
500ml Core
20Kg Core
50Kg Core
Available in 30 kg bag
Available in 30 kg bag
Available in 30 kg bag
Available in 50 kg wide-mouth
drum with 7.5 kg hardener
100 g Core
1Kg Core
50gm Core
500 ml
?
?
0.3 g Core
0.5 g Core
Additional Info
Application Method
Clean oil, grease and dirt from the surfaces.
Abrade the surface with sandpaper.
If you have greased the surface, degrease it using acetone
Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
Apply the mixture immediately after mixing is complete
Chemical Specs
Working Life 10 minutes approximately for 100g mix at 30° C
Setting Time 25 minutes approximately for 30g mix at 30° C
Water Absorption <0.5 percent
Precaution
Trim your nails before mixing
You may use hand gloves to protect your skin
Do not add any other solvent to the mixture
After mixing, do not hold the mixture in your hand
Wash your hands with soap and water immediately after application
Wait an hour after application for the mixture to harden completely.
Application Method
Clean oil, grease and dirt from the surfaces.
Abrade the surface with sandpaper
If you have greased the surface, degrease it using acetone
Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
Apply the mixture immediately after mixing is complete
Smoothen with a damp cloth within 20 minutes.
Chemical Specs
Processing Time 15 minutes approximately for 50g mix at 30° C
Setting Time 60 minutes approximately for 30g mix by Shore-A at 30° C
Water Absorption after 24 hrs curing at 30° C <0.5 percent
Working Temperature Limit 80° C
Precaution
Trim your nails before mixing
You may use hand gloves to protect your skin
Do not add any other solvent to the mixture
After mixing, do not hold the mixture in your hand
Wash your hands with soap and water immediately after application
Wait one to two hours after application for the mixture to harden completely
Application Method
Clean the impaired surface
Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
Apply the mixture immediately after mixing is complete
Smoothen it with wet cloth within 20 minutes
Chemical Specs
You may use hand gloves to protect your skin
Do not add any other solvent to the mixture
Wash your hands with a soap and water, or a cleansing cream immediately after application
Wait one to two hours after application for the mixture to harden completely
Chemical Specs
Put the cap back on immediately after use
Do not apply with fingers
Keep away from naked flame
Precaution
Suitable Pipe Diameter Up to 4 inches
Specific Gravity at 30° C 0.9 ± 0.02
Handling time 15 minutes
Cure time 2 hours
Application Method
Square cut the pipe as per required size and de-burr(s) with de-burring tools.
Clean the overlapping surfaces of pipe - socket
Shake well before using
Apply the cement on overlapping surfaces with a brush
Insert the pipe immediately and rotate 90° for better spreading
Wipe excess solvent with cloth
Align it well and hold it for 10 – 20 seconds
If the pipe diameter exceeds 3 inches, apply primer
Chemical Specs
Put the cap back on immediately after use
Do not apply with fingers
Keep away from naked flame
Precaution
Suitable Pipe Diameter Up to 4-inch pressure pipe & up to 12-inch non-pressure pipe
Specific Gravity at 30° C 0.88 - 0.92
Handling time 15 minutes
Cure time 2 hours
Application Method
Square cut the pipe as per required size and de-burr(s) with de-burring tools.
Clean the overlapping surfaces of pipe - socket
Shake well before using
Apply the cement on overlapping surfaces with a brush
Insert the pipe immediately and rotate 90° for better spreading
Wipe excess solvent with cloth
Align it well and hold it for 10 – 20 seconds
If the pipe diameter exceeds 3 inches, apply primer
Chemical Specs
Put the cap back on immediately after use
Do not apply with fingers
Keep away from naked flame
Precaution
Suitable Pipe Diameter Up to 6 inches
Temperature Resistance Up to 90° C
Handling time 15 minutes
Cure time 2 hours
For best results, degrease / abrade and make sure the surface is clean and free from dirt, dust and
contamination. Apply a thin film or one drop to one surface only and hold both parts together
firmly for a few seconds until the parts achieve handling strength.
Hippo
Grippo
Aredine