Beruflich Dokumente
Kultur Dokumente
Application:
Pressure hose suited for sewer cleaning vehicles, for
flushing drains and sewers in industry, commerce
and infrastructure.
Feature: Temperature range: -35°C / +80°C.
Very cost effective due to its highly abrasion and
weather resistant cover. (Abrasion according to EN Safety factor: 2,5 : 1
ISO 6945:2000, max 0.5g (100N)). Tube: SBR, black, smooth.
The smooth cover provides a low friction coefficient Reinforcement: Textile braided.
and is easily cleaned. Cover: NR/BR, black, smooth, highly abrasion resist
Notice: ant, weather resistant.
Other connections on request. Marking: Continuous labelling, orange:
"SEMPERIT S IK 25 PN 250 bar month/year ZH
Every assembly has a unique serial number on the 1/406".
coupling which, refers to the accompanying test cer
tificate.
High quality standards ensure maximum safety
(each hose is pressure tested and the bore size is
continuously checked electronically).
Date: 31.08.2007
IAL
Waste Suction Hose
Application:
Suction and delivery hose, specially designed as a
“cassette extension hose” for high pressure sewer
cleaning and waste suction vehicles.
Feature: Temperature range: -35°C / +80°C.
Dimensionally stable and highly flexible.
Safety factor: 3,15 : 1
High vacuum resistance. Tube: NR/SBR/BR, black, smooth, antistatic, oil resist
High abrasion resistance inside and outside. ant, abrasion resistant.
Notice: Reinforcement: Textile wrapped, steel wire helix.
Spiral-free sleeves available on request. Cover: SBR, black, cloth impression.
Marking: Continuous transfer tape, orange:
"SEMPERIT S IAL-Spezial".
Date: 31.08.2007
IFSD
Waste Water S&D Hose
Application:
Suction and delivery hose for heavy duty use for
media such as waste water, sewage and service
water.
Notice:
Temperature range: -35°C / +80°C.
On request:
- corrugated cover Safety factor: 3 : 1
- spiral-free or extended sleeves Tube: SBR, black, smooth.
- other colours and working pressures Reinforcement: Textile wrapped, zinc plated double
- also available in EPDM quality. steel wire helix (ID > 2 1/2" zinc plated steel wire
helix).
Cover: SBR, black, resistant to abrasion, ozone and
weather, cloth impression.
Marking: Continuous transfer tape, white:
"SEMPERIT S".
Date: 13.12.2010
ISDL
Waste Water S&D Hose
Application:
Suction and delivery hose for media such as waste
water, sewage and service water.
Notice:
For heavy duty use we recommend IFSD. Temperature range: -35°C / +80°C.
Also available in EPDM quality on request. Safety factor: 3.15 : 1
Also with corrugated cover on request. Tube: SBR, black, smooth.
Reinforcement: Textile wrapped, double steel wire
helix.
Cover: SBR, black, resistant to abrasion, ozone and
weather, cloth impression.
Marking: None
Date: 31.08.2007
MP 20 EPDM
Multi-Purpose Hose
Application:
Highly flexible multi-purpose hose, with very good
ageing, weather and abrasion resistance.
Suitable for conveying air and water, as well as
many chemical products in industry and agriculture Temperature range: -40°C / + 95°C, briefly up to
(see resistance list). 110°C.
Feature: Safety factor: 4 : 1
High EPDM quality ensures excellent ozone and Tube: EPDM, black, smooth, electrically conductive.
weather resistance.
Reinforcement: Textile spiral construction.
Kink resistant due to textile reinforcement.
Cover: EPDM, black, smooth, electrically conductive,
Electrically conductive tube construction prevents ozone and weather resistant.
the build-up of static electricity. R < 106 Ω (accord Marking: Blue longitudinal stripes, continuous coloured
ing to EN ISO 8031:1997).
marking, white:
Notice: "SEMPERIT S MP 20-EPDM MULTI PURPOSE PN 20
If in any doubt regarding use, please contact Sem BAR DN"
perit.
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit.
ATTENTION: The temperature of the medium must
be lower than its boiling point.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68024 0635 6,0 1/4 3,5 13,0 20 2 40 0,15 100
68024 0835 8,0 5/16 3,5 15,0 20 2 50 0,18 100
68024 1035 10,0 3/8 3,5 17,0 20 2 60 0,21 100
68024 1340 13,0 1/2 4,0 21,0 20 2 80 0,30 100
68024 1640 16,0 5/8 4,0 24,0 20 2 100 0,35 100
68024 1945 19,0 3/4 4,5 28,0 20 2 115 0,47 50
68024 2550 25,0 1 5,0 35,0 20 2 150 0,67 50
68024 3260 32,0 1 1/4 6,0 44,0 20 4 200 1,05 50
68024 3860 38,0 1 1/2 6,0 50,0 20 4 250 1,20 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
IWH
Water Hose
Application:
Highly flexible service water hose, with very good
ageing, weather and abrasion resistance, for con
veying air and water.
Feature: Temperature range: -40°C / +95°C, briefly up to
EPDM tube and cover resistant to heat, sunlight, +110°C.
ozone and weather. Safety factor: 3 : 1
Kink resistant due to textile reinforcement. Tube: EPDM, black, smooth, electrically conductive.
Electrically conductive tube construction prevents Reinforcement: Textile spiral construction.
the build-up of static electricity. Resistance R<106
Ohm (according to EN ISO 8031:1997). Cover: EPDM, black, smooth, electrically conductive,
ozone and weather resistant.
Notice: Marking: 6 orange longitudinal stripes, continuous col
If in any doubt regarding use, please contact Sem oured marking, white:
perit. "SEMPERIT S Wasser/Water EPDM WP ..bar / BP ..
Blue stripes also available on request. bar quarter/year".
ATTENTION: Please be aware of the safety factor.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68908 1330 13,0 1/2 3,0 19,0 20 2 80 0,23 50
68908 1940 19,0 3/4 4,0 27,0 20 2 120 0,42 50
68908 2545 25,0 1 4,5 34,0 20 2 150 0,60 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PL0
Air/Water Hose
Application:
A flexible hose for the transport of compressed air
and water for building sites, garages, filling stations
and car repair workshops, under difficult condi
tions.
Temperature range: -30°C / +70°C.
For high pressure applications.
Safety factor: 4 : 1
Norm/Zulassung:
Tube: SBR/NR, black, smooth, suitable for oil-laden air.
EN ISO 2398 1A:1997
Reinforcement: Textile spiral construction (ID > 25mm
Notice: wrapped).
Larger dimensions available on request. Cover: SBR/EPDM, black, smooth (ID > 25mm SBR,
cloth impression).
Marking: Continuous coloured marking, white:
"SEMPERIT S PL0 Druckluft/Wasser Air/Water Heavy
Duty WP 20 bar/BP 80 bar", ID > 25: continuous
transfer tape, blue.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68441 0435 4,0 3,5 11,0 20 2 35 0,12 50
68441 0528 5,3 2,8 11,0 20 2 44 0,10 50
68441 0835 8,0 5/16 3,5 15,0 20 2 72 0,18 50
68441 0840 8,0 5/16 4,0 16,0 20 2 72 0,22 50
68441 1040 10,0 3/8 4,0 18,0 20 2 91 0,26 50
68441 1650 16,0 5/8 5,0 26,0 20 2 220 0,48 50
68441 1955 19,0 3/4 5,5 30,0 20 2 290 0,62 50
68441 2560 25,0 1 6,0 37,0 20 2 350 0,90 50
48423 3055 30,0 5,5 41,0 20 2 400 0,85 40
48423 3860 38,0 1 1/2 6,0 50,0 20 2 450 1,20 40
48423 5080 50,0 8,0 66,0 20 4 500 1,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PL1S
Air/Water Hose
Application:
A flexible air and water hose for use in industry,
commerce and on construction sites.
Standard/approval:
EN ISO 2398:1997 1A. Temperature range: -30°C / +80°C.
Notice: Safety factor: 3 : 1
Larger dimensions available on request. Tube: SBR/NR, black, smooth, suitable for oil-laden air.
Reinforcement: Textile spiral construction (ID > 25mm,
wrapped).
Cover: SBR/EPDM, black, smooth, weather resistant,
(ID > 32mm SBR, cloth impression).
Marking: Continuous coloured marking, white:
"SEMPERIT S PL1S Druckluft/Wasser Air/Water WP
20 bar/BP 60 bar", ID > 25mm: continuous transfer
tape, blue.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68440 0532 5,0 3/16 3,2 11,4 20 2 45 0,11 50
68440 0640 6,0 1/4 4,0 14,0 20 2 60 0,17 50
68440 0636 6,3 3,2 12,7 20 2 60 0,13 50
68440 0832 8,0 3,2 14,4 20 2 80 0,16 50
68440 0840 8,0 4,0 16,0 20 2 80 0,22 50
68440 0845 8,0 5/16 4,5 17,0 20 2 80 0,24 50
68440 1035 10,0 3/8 3,5 17,0 20 2 100 0,21 50
68440 1045 10,0 3/8 4,5 19,0 20 2 100 0,27 50
68440 1340 12,5 1/2 4,0 20,5 20 2 75 0,28 50
68440 1345 13,0 4,5 22,0 20 2 80 0,34 50
68440 1645 16,0 5/8 4,5 25,0 20 2 100 0,39 50
68440 1935 19,0 3/4 3,5 26,0 20 2 120 0,34 50
68440 1950 19,0 3/4 5,0 29,0 20 2 120 0,49 50
68440 1955 19,0 3/4 5,5 30,0 20 2 120 0,57 50
68440 2550 25,0 1 5,0 35,0 20 2 150 0,63 50
68440 2560 25,0 1 6,0 37,0 20 2 150 0,79 50
68440 3265 32,0 6,5 45,0 20 2 190 1,07 50
48425 3860 38,0 1 1/2 6,0 50,0 20 2 350 1,20 40
48425 4060 40,0 6,0 52,0 20 2 400 1,20 40
48425 5070 50,0 7,0 64,0 20 4 500 1,55 40
48425 7510 75,0 10,0 95,0 20 4 650 2,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PLE / PL15
Air / Water Hose
Application:
Suitable for the delivery of lubricant-laden com
pressed air and water at a working pressure of 15
bar.
For use in industry and commerce. Temperature range: -35°C / +70°C.
Feature: Safety factor: 3 : 1
Excellent value for money. Tube: SBR, black, smooth, suitable for oil-laden air.
Notice: Reinforcement: Textile spiral construction, (ID > 25mm,
Other dimensions available on request. wrapped).
Cover: SBR, black, smooth, (ID > 25mm, cloth impres
sion).
Marking: Continuous colour marking, white:
"SEMPERIT S PLE/PL15 Luft/ Wasser Air/Water WP
15 bar/BP 45 bar", ID > 25 continuous in transfer
tape, silver.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68056 0630 6,0 1/4 3,0 12,0 15 2 60 0,11 50
68056 0835 8,0 5/16 3,5 15,0 15 2 80 0,17 50
68056 0935 9,0 3,5 16,0 15 2 90 0,19 50
68056 1035 10,0 3/8 3,5 17,0 15 2 100 0,22 50
68056 1335 13,0 1/2 3,5 20,0 15 2 100 0,26 50
68056 1340 13,0 4,0 21,0 15 2 130 0,31 50
68056 1635 16,0 5/8 3,5 23,0 15 2 160 0,31 50
68056 1650 16,0 5/8 5,0 26,0 15 2 160 0,49 50
68056 1935 19,0 3/4 3,5 26,0 15 2 120 0,36 50
68056 1950 19,0 3/4 5,0 29,0 15 2 190 0,55 50
68056 1960 19,0 3/4 6,0 31,0 15 2 220 0,64 50
68056 2040 20,0 4,0 28,0 15 2 200 0,44 50
68056 2045 20,0 4,5 29,0 15 2 200 0,51 50
68056 2050 20,0 5,0 30,0 15 2 200 0,58 50
68056 2540 25,0 1 4,0 33,0 15 2 250 0,53 50
68056 2550 25,0 1 5,0 35,0 15 2 250 0,70 50
48413 3055 30,0 5,5 41,0 15 2 200 0,93 40
48413 3255 32,0 1 1/4 5,5 43,0 15 2 210 0,95 40
48413 3560 35,0 6,0 47,0 15 2 250 1,05 40
48413 5070 50,0 7,0 64,0 15 4 350 1,54 40
48413 7580 75,0 8,0 91,0 15 4 600 2,64 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
IWR
Water Hose
Application:
A flexible flushing hose for industry, building sites,
ships, ice rinks, sports facilities, garages, car
washes, gardens and parks.
Temperature range: -30°C / +70°C.
Safety factor: 3,2 : 1
Tube: SBR/NR, black, smooth.
Reinforcement: Textile spiral construction.
Cover: NR/SBR, red, smooth, weather resistant.
Marking: Continuous coloured marking, white:
"SEMPERIT S IWR Wasser/Water PN 10 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68900 1335 12,5 1/2 3,5 19,5 10 2 100 0,26 50
68900 1635 16,0 5/8 3,5 23,0 10 2 160 0,30 50
68900 2035 20,0 3,5 27,0 10 2 160 0,38 50
68900 2540 25,0 1 4,0 33,0 10 2 200 0,50 50
68900 3255 31,5 1 1/4 5,5 42,5 10 2 250 0,90 50
68900 3860 38,0 1 1/2 6,0 50,0 10 2 350 1,18 50
68900 4060 40,0 6,0 52,0 10 2 340 1,23 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
ISC
Water Hose
Application:
Service water pipe for applications in industry, agri
culture, home and garden.
Feature:
The hose is easy to identify due to its 9 blue longit Temperature range: -35°C / +70°C.
udinal stripes. Safety factor: 3,15 : 1
Notice: Tube: SBR/NR, black, smooth.
For short term peak pressures up to 12 bar. Reinforcement: Textile spiral construction.
Cover: SBR/EPDM, black, smooth.
Marking: 9 blue longitudinal stripes, continuous col
oured marking, white:
"SEMPERIT S ISC WASSER/WATER PN 8 BAR“.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68913 1030 10,0 3/8 3,0 16,0 8 2 70 0,20 50
68913 1335 13,0 1/2 3,5 20,0 8 2 80 0,25 50
68913 1635 16,0 5/8 3,5 23,0 8 2 100 0,35 50
68913 1940 19,0 3/4 4,0 27,0 8 2 150 0,45 50
68913 2545 25,0 1 4,5 34,0 8 2 185 0,65 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
IW 6
Water Hose
Application:
Low cost service water hose for diverse applications
in industry and commerce.
Date: 31.08.2007
IWSS
Water/Compressed Air
Application:
Delivery hose for water and compressed air for use
in mining, industry, agriculture, gardening, etc.
Feature:
Low cost, robust hose, available in various thick Temperature range: -35°C / +80°C.
nesses. Safety factor: 3 : 1
Tube: SBR, black, smooth.
Reinforcement: Textile wrapped.
Cover: SBR, black, cloth impression.
Marking: Continuous coloured marking, white:
"SEMPERIT S IWS PN 10 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Biegeradius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min) in mm approx. kg/m (max.) m
48320 3055 30,0 5,5 41,0 10 2 200 0,85 40
48320 3255 32,0 1 1/4 5,5 43,0 10 2 210 0,90 40
48320 3560 35,0 6,0 47,0 10 2 230 1,10 40
48320 3860 38,0 1 1/2 6,0 50,0 10 2 250 1,15 40
48320 4065 40,0 6,5 53,0 10 2 280 1,45 40
48320 5070 50,0 2 7,0 64,0 10 2 350 1,75 40
48320 6070 60,0 7,0 74,0 10 2 400 2,05 40
48320 6580 65,0 8,0 81,0 10 2 450 2,55 40
48320 7070 70,0 7,0 84,0 10 2 480 2,40 40
48320 7580 75,0 3 8,0 91,0 10 2 550 3,25 40
56320 8080 80,0 8,0 96,0 10 2 600 3,35 40
56320 9080 90,0 8,0 106,0 10 4 650 3,60 40
56320 0080 100,0 4 8,0 116,0 10 4 720 5,20 40
56320 0610 150,0 6 10,0 170,0 10 4 1200 6,95 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
ISF
Water Hose
Application:
A lightweight rubber hose for service water. Can be
rolled flat.
Especially suitable as a discharge hose for submers
ible pumps as well as a water hose in industry, agri Temperature range: -35°C / +70°C.
culture and in building industry.
Safety factor: 2,5 : 1
Notice:
Tube: SBR, black.
On request in EPDM quality available.
Reinforcement: Textile wrapped.
On request in 5 bar or 10 bar version availabel.
Cover: SBR, black, cloth impression.
ATTENTION: It is vital to to be aware of the differ
ent working pressure. Marking: None
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
48310 5025 50,0 2,5 55,0 10 2 0,55 40
48310 7525 75,0 2,5 80,0 8 2 0,80 40
56310 2030 200,0 3,0 206,0 4 2 2,35 40
56310 2530 250,0 3,0 256,0 3 2 3,65 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
ISF5
Water Hose
Application:
A lightweight rubber hose for service water. Can be
rolled flat.
Especially suitable as a discharge hose for submers
ible pumps as well as a water hose in industry, agri Temperature range: -35°C / +80°C.
culture and in mining.
Safety factor: 3,15 : 1
Notice:
Tube: EPDM, black, smooth.
Red cover also available on request.
Reinforcement: Textile wrapped.
Cover: EPDM, black, resistant to abrasion, ozone and
weather, cloth impression.
Marking: None
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
56312 5130 51,0 2 3,0 57,0 5 2 0,77 40
56312 6330 63,5 2 1/2 3,0 69,5 5 2 0,84 40
56312 6530 65,0 3,0 71,0 5 2 0,85 40
56312 7630 76,0 3 3,0 82,0 5 2 0,90 40
56312 9030 90,0 3,0 96,0 5 2 1,30 40
56312 0030 102,0 4 3,0 108,0 5 2 1,46 40
56312 0130 114,0 3,5 121,0 5 2 1,80 40
56312 0530 127,0 5 4,0 135,0 5 2 2,10 40
56312 0635 152,0 6 4,0 160,0 5 2 2,60 40
56312 1740 170,0 4,0 178,0 5 2 3,25 40
56312 0840 203,0 8 4,0 211,0 5 2 4,00 40
56312 1040 254,0 10 4,0 262,0 5 2 5,05 40
56312 1245 305,0 12 4,5 314,0 5 2 6,40 15,5
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
ISF10
Water Hose
Application:
Heavy duty, high performance hose. Can be rolled
flat. For conveying service water.
Feature:
Especially suitable as a discharge hose for submers Temperature range: -35°C / +80°C.
ible pumps as well as a high pressure water hose in Safety factor: 3,15 : 1
industry, agriculture and in mining.
Tube: EPDM, black, smooth.
Reinforcement: Textile wrapped.
Cover: EPDM, black, resistant to abrasion, ozone and
weather, cloth impression.
Marking: None
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
56313 2530 25,0 1 3,0 31,0 10 2 0,31 40
56313 3230 32,0 1 1/4 3,0 38,0 10 2 0,44 40
56313 3830 38,0 1 1/2 3,0 44,0 10 2 0,55 40
56313 5135 51,0 2 3,5 58,0 10 2 0,77 40
56313 6335 63,5 2 1/2 3,5 70,5 10 2 0,84 40
56313 7635 76,0 3 3,5 83,0 10 2 0,90 40
56313 9040 90,0 4,0 98,0 10 2 1,30 40
56313 0040 102,0 4 4,0 110,0 10 2 1,46 40
56313 0540 127,0 5 4,5 136,0 10 2 2,10 40
56313 0645 152,0 6 4,5 161,0 10 2 2,60 40
56313 0850 203,0 8 5,0 213,0 10 4 4,10 40
56313 1050 254,0 10 6,0 266,0 10 4 5,65 40
56313 1270 305,0 12 7,0 319,0 10 4 7,93 15,5
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
IWF
Fire Extinguisher Hose
Application:
Flexible hose used for fire extinguishers.
Suitable for transporting water and fire extinguishing
substances.
Standard/approval: Temperature range: -40°C / +100°C, Flow medium:
up to +50°C.
EN 3-7:2004.
Safety factor: 3 : 1
Tube: EPDM, black, smooth.
Reinforcement: Textile, spiral construction.
Cover: EPDM, black, smooth, temperature and weath
er resistant.
Marking: None
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68901 1230 12,0 1/2 3,0 18,0 22 2 70 0,21 50
68901 1340 13,0 1/2 4,0 21,0 22 2 75 0,29 50
68901 1650 16,0 5/8 5,0 26,0 22 2 95 0,47 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
IWFS
Fire Extinguisher Hose
Application:
High quality service water hose for reel mounted
fire fighting equipment (e.g. airports, buildings and
industrial installations, indoors).
Feature: Temperature range: -20°C / +60°C.
Short term temperature resistant up to +200°C acc. Safety factor: 3,5 : 1
to EN694:2003 Type A1.
Tube: SBR/NR, black, smooth.
Standard/approval:
Reinforcement: Textile spiral construction.
EN 694:2003 Type A1.
Cover: SBR/EPDM, black, smooth, ozone resistant
Marking: Continuous coloured marking, white:
"SEMPERIT S IWFS EN 694 A1 DN quarter/year"
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68023 1940 19,0 3/4 4,0 27,0 12 2 114 0,42 50
68023 2545 25,0 1 4,5 34,0 12 2 150 0,60 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
INP
Fire Reel Hose
Application:
High quality fire fighting hose used for fire engines.
Feature:
The smooth cover provides a low friction coefficient
for easy handling. Temperature range: -35°C / +80°C.
Standard/approval: Safety factor: 3 : 1
EN 1947:2002 Type A, class 1. Tube: NBR, black, smooth.
Reinforcement: Textile braided.
Cover: SBR, black, smooth.
Marking: according customer request.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68476 1955 19,0 3/4 5,5 30,0 40 2 120 0,55 60
68476 2560 25,0 1 6,0 37,0 40 2 130 0,78 40
68476 2564 25,0 1 6,0 37,0 40 2 130 0,78 100
68476 2567 25,0 1 6,0 37,0 40 2 130 0,78 10 - 39
68476 2569 25,0 1 6,0 37,0 40 2 130 0,78 60
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
INP SD
Fire S&D Hose
Application:
Suction hose for drawing water from hydrants by
fire brigade pumps.
Feature:
Hose is corrugated and has sleeves.
Temperature range: -35°C / +80°C.
Standard/approval:
EN ISO 14557:2003 Tube: SBR, black, smooth.
Reinforcement: Textile, wrapped, zinc plated steel wire
helix.
Cover: SBR, black, corrugated, weather resistant.
Marking: None
Date: 31.08.2007
ISK
Snow Gun Hose
Application:
Snow gun hose offering a flexible connection
between reservoir and snow gun.
Feature:
Extremely long service life due to abrasion and Temperature range: -35°C / +80°C.
ozone resistant rubber quality of the cover.
Safety factor: 2,5 : 1
Notice:
Tube: SBR, black, smooth.
Also available with black CR cover and/or steel
wire braided reinforcement (on request). Reinforcement: Textile wrapped.
Cover: CSM, blue, abrasion resistant, weather resist
ant, cloth impression.
Marking: None
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48326 3870 38,1 1 1/2 7,0 52,1 40 4 145 1,24 40
48326 5175 50,8 2 7,5 66,0 40 4 200 1,40 40
48326 6570 65,0 7,0 79,0 40 4 260 1,90 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
ILD / H2O
Cooling Water Hose
Application:
A special cooling water hose for the LD process.
The hose was developed in close cooperation with
the patent owners.
Feature: Temperature range: -35°C / +80°C. Max. radiation
The hose features excellent flexibility. temperature (where the hose is protected by glass fab
ric cover): +300°C
The heat resistant rubber cover is protected from Safety factor: 2,5 : 1
heat radiation by a vulcanised glass fabric layer
that covers approx. 6 m at the end of the hose. Tube: SBR, black, smooth.
Notice: Reinforcement: Textile wrapped, steel wire helix.
The hose is supplied with vulcanised hose fittings Cover: SBR, black, vulcanised glass fabric cover over a
and flanges complying with international standards: length of approx. 6 m at one end of the hose, zinc
DIN, ASA, ANSI. plated external wire helix.
Marking: None.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56642 8012 80,0 12,0 104,0 16 4 650 6,30 -
56642 8013 80,0 13,0 106,0 16 4 650 6,50 -
56642 0015 100,0 15,0 130,0 16 6 800 11,28 -
56642 0615 150,0 15,0 180,0 16 6 1200 15,30 -
56642 1613 152,4 6 13,0 178,4 10 4 1200 16,10 -
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
ILD / O2
Oxygen Hose
Application:
A special oxygen hose for the LD process.
The hose was developed in close cooperation with
the patent owners.
Feature: Temperature range: -35°C / +80°C. Max. radiation
The hose features excellent flexibility. temperature (where the hose is protected by glass fab
ric cover): +300°C
The heat resistant rubber cover is protected from
heat radiation by a vulcanised glass fabric layer Safety factor: 3.75 : 1
that covers approx. 6 m at the end of the hose. Tube: NR/SBR, transparent, smooth.
Notice: Reinforcement: Textile wrapped, steel wire helix.
The hose is supplied with vulcanised hose fittings Cover: NR, light, vulcanised glass fabric cover over a
and flanges complying with international standards: length of approx. 6 m at one end of the hose. Zinc
DIN, ASA, ANSI. plated external wire helix.
Marking: None.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56641 8014 80,0 14,0 108,0 16 4 650 6,75 -
56641 0318 125,0 20,0 165,0 16 4 1000 16,60 -
56645 0617 152,0 6 17,0 186,0 16 6 1250 20 -
56641 1119 203,2 8 22,0 247,2 16 6 1500 25,50 -
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 30.04.2008
DS1
Steam Hose
Application:
Suitable for conveying saturated steam and hot
water.
Feature:
Electrically conductive: Resistance R<106 Ohm. Temperature range: +210°C (saturated steam),
Tried and tested by the chemical industry. +120°C (hot water).
Safety factor: Steam 10: 1, Water 3.15 : 1
Standard/approval:
Tube: EPDM, black, smooth, electrically conductive.
EN ISO 6134:2005 Type 2, class A; (supersedes
DIN 2825:1994). Reinforcement: Steel wire braided, zinc-plated.
Notice: Cover: EPDM, black, electrically conductive, cloth
impression.
Hose conforms to DIN 2825:1994, which has
been superseded by EN ISO 6134:2005. Marking: Continuous transfer tape, red:
"SEMPERIT S DS1 Sattdampf/ Saturated Steam
ATTENTION: Use only suitable fittings (clamp 210°C Sempersteam PN 18 bar R < 106 Ohm" as
fittings according to EN 14423:2005). well as red embossed labelling according to EN ISO
6134 (with EN dimensions).
ATTENTION: Superheated steam shortens
considerably the service life of the hose!
ATTENTION: Please refer to our saturated steam
table.
Date: 22.09.2010
DSE
Steam Hose
Application:
Suitable for conveying saturated steam and hot wa
ter.
Feature:
Electrically conductive: Resistance R < 106 Ohm. Temperature range: +204°C (saturated steam), +95°
C (hot water).
Notice:
Safety factor: Steam 10: 1, Water 3.15: 1
Good resistance to many commercial cleaning
agents. If using cleaning agents, please refer to Tube: EPDM, black, smooth, electrically conductive.
our separate information sheet. Reinforcement: Steel wire braided, zinc-plated.
ATTENTION: Use only suitable fittings (clamp fit Cover: EPDM, black, electrically conductive, cloth im
tings according to EN 14423:2005). pression.
ATTENTION: Superheated steam shortens consid Marking: Continuous transfer tape – black writing, red
erably the service life of the hose! background:
ATTENTION: Please refer to the saturated steam ta "SEMPERIT S DSE Sattdampf /Saturated Steam 204°
ble. C PN 16bar R< 106 Ohm".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m
48705 1360 13,0 1/2 6,0 25,0 16 50 1 80 0,52 40
48705 1955 19,0 3/4 5,5 30,0 16 50 1 110 0,60 40
48705 1965 19,0 3/4 6,5 32,0 16 50 1 110 0,75 40
48705 2570 25,0 1 7,0 39,0 16 50 1 170 1,00 40
48705 3270 32,0 1 1/4 7,0 46,0 16 50 1 250 1,30 40
48705 3880 38,0 1 1/2 8,0 54,0 16 50 1 350 1,86 40
48705 5090 50,0 9,0 68,0 16 50 2 420 2,40 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
DS3
Steam Hose
Application:
Suitable for conveying saturated steam and hot wa
ter.
For use in industry, car repair workshops and in pro
cess plants. Temperature range: +164°C (saturated steam), +95°
Notice: C (hot water).
Good resistance to many commercial cleaning Safety factor: Steam 10: 1, Water 3.15 : 1
agents. If using cleaning agents, please refer to our Tube: SBR/EPDM, black, smooth, antistatic.
separate information sheet.
Reinforcement: Textile wrapped.
ATTENTION: Superheated steam shortens consid
erably the service life of the hose! Cover: SBR/NBR, red, limited grease and oil resist
ance, cloth impression.
ATTENTION: Please refer to the saturated steam ta
ble. Marking: Continuous transfer tape, black:
"SEMPERIT S DS3 Sattdampf/Saturated Steam 164°
C Sempersteam PN 6 bar“.
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m
48446 1350 13,0 1/2 5,0 23,0 6 18 2 80 0,35 40
48446 1660 16,0 5/8 6,0 28,0 6 18 2 95 0,55 40
48446 1960 19,0 3/4 6,0 31,0 6 18 2 115 0,60 40
48446 2570 25,0 1 7,0 39,0 6 18 2 150 0,90 40
48446 3270 32,0 1 1/4 7,0 46,0 6 18 2 195 1,05 40
48446 3890 38,0 1 1/2 9,0 56,0 6 18 2 230 1,65 40
48446 5010 50,0 10,0 70,0 6 18 2 300 2,40 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
DSL
Steam Hose
Application:
Suitable for conveying saturated steam and hot wa
ter.
Notice:
Not suitable for use in explosive enviroment. Temperature range: +143°C (saturated steam), +95°
C (hot water).
ATTENTION: Use only suitable clamp fittings as per
DIN EN 14423:2005. Safety factor: Steam: 10:1, water: 3.75:1
ATTENTION: Superheated steam shortens consid Tube: SBR/NR, black, smooth.
erably the service life of the hose. Reinforcement: Textile spiral construction.
ATTENTION: Please refer to our saturated steam ta Cover: SBR/NR, black, smooth or fluted.
ble. Marking: Continuous coloured marking, white:
"SEMPERIT S DSL STEAM 3 BAR MAX 143°C".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m
68020 1670 16,0 5/8 7,0 30,0 3 8 2 160 0,64 50
68020 1870 18,0 7,0 32,0 3 8 2 180 0,70 50
68020 2070 20,0 3/4 7,0 34,0 3 8 2 200 0,76 50
68020 2570 25,0 1 7,0 39,0 3 8 2 250 0,96 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
DH1
Hot Water Hose
Application:
Mainly used as a cooling or hot water hose in the
iron and steel industry.
Feature:
The vulcanised glass fabric cover protects against
high external temperatures, radiation heat and Temperature range: +95°C for hot water, radiation
sparks. temperature approx. 300°C (with 1 gfc -
DH1),approx. 500°C (with 3 gfc - DH3).
Notice:
Safety factor: 3,15 : 1
On request:
- with 3 glass fabric covers Tube: SBR, black, smooth.
- white tube
- Nomex® cover. Reinforcement: Textile wrapped.
DH1......with 1 glass fabric cover (acc. to table), DH3......with 3 glass fabric covers (on request)
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48337 1355 13,0 1/2 5,5 24,0 12 2 50 0,50 40
48337 1955 19,0 3/4 5,5 30,0 12 2 95 0,60 40
48337 2560 25,0 1 6,0 37,0 12 2 125 0,75 40
48337 3260 32,0 1 1/4 6,0 44,0 12 2 160 1,00 40
48337 3560 35,0 1 3/8 6,0 47,0 12 2 175 1,15 40
48337 3870 38,0 1 1/2 7,0 52,0 12 2 190 1,35 40
48337 3880 38,0 1 1/2 8,0 54,0 12 2 200 1,55 40
48337 4070 40,0 7,0 54,0 10 2 200 1,45 40
48337 5070 50,0 7,0 64,0 8 2 250 1,75 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 21.07.2009
DHG
Hot Water Hose
Application:
For a wide range of applications in car repair work
shops, garages, in the food industry, in slaughter
houses, dairies, etc.
Feature: Temperature range: -35°C / +95°C.
Cover offers limited resistance to animal and veget Safety factor: 3,15 : 1
able oil and grease.
Tube: SBR/NR, black.
Notice:
Reinforcement: Textile spiral construction.
Good resistance to many commercial cleaning
agents. If using cleaning agents, please refer to Cover: NR/SBR, grey, smooth, limited resistance to
our separate information sheet. grease and oil.
Marking: Continuous coloured marking, black:
"SEMPERIT S DHG Heisswasser/Hot Water max. 95°
C PN 6 bar“.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68192 1335 13,0 1/2 3,5 20,0 6 2 65 0,27 50
68192 1945 19,0 3/4 4,5 28,0 6 2 95 0,48 50
68192 2550 25,0 1 5,0 35,0 6 2 125 0,67 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
DHH
Hot Water Hose
Application:
A flexible hose for conveying hot water for many
applications in industry.
Suitable for transporting anti-freezing agents in cars,
tractors and trucks. Temperature range: -45°C / +120°C.
Notice: Safety factor: 5 : 1
ATTENTION: Hot water hose is not suitable for Tube: EPDM, black, smooth, heat resistant.
steam applications, (for steam use we recommend
DS 1, DSE, DS 3). Reinforcement: Textile wrapped.
Cover: EPDM, black, resistant to heat, ozone and
weather, cloth impression.
Marking: None
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48444 1350 13,0 1/2 5,0 23,0 10 2 50 0,35 40
48444 1650 16,0 5/8 5,0 26,0 10 2 80 0,40 40
48444 1950 19,0 3/4 5,0 29,0 10 2 100 0,50 40
48444 2550 25,0 1 5,0 35,0 10 2 125 0,60 40
48444 2555 25,0 1 5,5 36,0 10 2 125 0,65 40
48444 3260 32,0 1 1/4 6,0 44,0 10 2 150 0,80 40
48444 3860 38,0 1 1/2 6,0 50,0 10 2 190 1,05 40
48444 5175 51,0 2 7,5 66,0 10 2 223 1,20 40
48444 6375 63,5 2 1/2 7,5 78,5 10 2 270 1,95 40
56444 1010 102,0 4 10,0 122,0 10 4 370 4,30 40
56444 7680 76,0 3 8,0 92,0 10 4 310 2,50 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 28.08.2009
DKS
Cable Protection Hose
Application:
Used as a cable cover hose for applications which
do not require special electrical insulation qualities.
Ideal for portable equipment in welding applica
tions.
Notice: Temperature range: -35°C / +100°C
EPDM quality available on request. Tube: Rubber coated, synthetic fabric.
Reinforcement: None.
Cover: SBR, black, resistant to abrasion and ozone,
cloth impression.
Marking: None.
Date: 31.08.2007
LM3
Multi-Purpose Food Quality Hose
Application:
Suitable for cleaning in dairies, food production
plants and slaughterhouses as a steam, hot water
and cold water hose.
Also for conveying liquid food stuffs, in particular Temperature range: -35°C / +95°C hot water
milk and dairy products, animal and vegetable oils / +164°C saturated steam.
and fats.
Safety factor: Steam: 10 : 1, hot water: 3.15 : 1
Standard/approval:
Tube: NBR, white, smooth, food quality, grease and oil
BfR (former BgVV) XXI:2002 (Kat.2), FDA (CFR 21 resistant.
§ 177.2600).
Reinforcement: Textile wrapped.
Notice:
Cover: NVC, blue, grease and oil resistant, cloth im
To meet the high demands associated with continu pression.
ous steam operation we recommend DS1, DSE or
DS3 hoses. Marking: Continuous transfer tape, white:
"SEMPERIT S LM3 - NBR Lebensmittel/Dampf/Food/
Very high resistance to many aggressive cleaning Steam D PN 6 bar 164°C Dampf".
agents.
For the application of cleaning agents, please refer
to our separate information sheet.
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m
48244 1350 13,0 1/2 5,0 23,0 6 18 2 80 0,38 40
48244 1650 16,0 5/8 5,0 26,0 6 18 2 95 0,44 40
48244 1960 19,0 3/4 6,0 31,0 6 18 2 115 0,62 40
48244 2570 25,0 1 7,0 39,0 6 18 2 150 0,91 40
48244 3270 32,0 7,0 46,0 6 18 2 195 1,10 40
48244 3890 38,0 9,0 56,0 6 18 2 230 1,65 40
48244 4090 40,0 9,0 58,0 6 18 2 240 1,70 40
48244 5010 50,0 10,0 70,0 6 18 2 300 2,35 40
48244 6512 65,0 12,0 89,0 6 18 4 390 3,70 40
48244 7512 75,0 12,0 99,0 6 18 4 450 4,10 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LMD
Cleaning Hose
Application:
Suitable for steam and hot water cleaning purposes
and for conveying liquid products such as milk.
Suitable for use in dairies, slaughterhouses and in
the food industry. Temperature range: -35°C / +95°C hot water
Standard/approval: / +164°C saturated steam.
BfR (former BgVV) XXI:2002 (Kat.2), FDA (CFR 21 Safety factor: Steam: 10 : 1, hot water: 3.15 : 1
§177.2600). Tube: EPDM, white, smooth, food quality, resistant to
Notice: temperature and cleaning agents.
For applications of cleaning agents, please see our Reinforcement: Textile wrapped.
separate information sheet. Cover: EPDM, blue, resistant to abrasion, grease and
oil, cloth impression.
Marking: Continuous transfer tape, white:
"SEMPERIT S LMD - EPDM Lebensmittel/Dampf/
Food/Steam PN 6 bar 164°C Dampf".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m
48245 1350 13,0 1/2 5,0 23,0 6 18 2 90 0,38 40
48245 1360 13,0 1/2 6,0 25,0 6 18 2 90 0,42 40
48245 1660 16,0 5/8 6,0 28,0 6 18 2 100 0,50 40
48245 1955 19,0 3/4 5,5 30,0 6 18 2 120 0,60 40
48245 1960 19,0 3/4 6,0 31,0 6 18 2 120 0,65 40
48245 2560 25,0 1 6,0 37,0 6 18 2 160 0,80 40
48245 2565 25,0 1 6,5 38,0 6 18 2 160 0,88 40
48245 2570 25,0 1 7,0 39,0 6 18 2 160 0,96 40
48245 3270 32,0 7,0 46,0 6 18 2 200 1,20 40
48245 3880 38,0 8,0 54,0 6 18 4 240 1,63 40
48245 5185 51,0 2 8,5 68,0 6 18 4 310 2,12 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LMH
Cleaning Hose
Application:
Suitable for washing and cleaning with hot water in
dairies, food production plants and paper mills
where wear-resistant hoses that withstand higher
pressures and temperatures of up to +95°C are
needed. Temperature range: -35°C / +95°C up to +130°C
for short periods.
Standard/approval:
Safety factor: 4 : 1
BfR (BgVV) XXI:2002 (Kat.2), FDA (CFR 21
§177.2600). Tube: EPDM, white, smooth, food quality, resistant to
temperature and cleaning agents.
Notice:
Reinforcement: Textile wrapped.
Other colours available on request.
Cover: EPDM, blue, resistant to abrasion, grease and
Oil resistant cover available on request. oil, cloth impression.
Not suitable for use with pure steam. Marking: Continuous transfer tape, white:
For the application of cleaning agents, please refer "SEMPERIT S LMH - EPDM Lebensmittel/Heisswasser
to our separate information sheet. Food/Hot Water PN 10 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48243 1345 13,0 1/2 4,5 22,0 10 2 90 0,30 40
48243 1650 16,0 5/8 5,0 26,0 10 2 100 0,42 40
48243 1955 19,0 3/4 5,5 30,0 10 2 120 0,51 40
48243 2565 25,0 1 6,5 38,0 10 2 160 0,78 40
48243 3280 32,0 1 1/4 8,0 48,0 10 2 220 1,20 40
48243 3885 38,0 1 1/2 8,5 55,0 10 2 250 1,50 40
48243 5190 51,0 2 9,0 69,0 10 4 320 2,10 40
48243 6312 63,5 2 1/2 12,7 89,0 10 4 410 3,50 40
56243 7612 76,0 3 12,5 101,0 10 4 460 4,15 40
56243 0015 102,0 4 15,0 132,0 10 4 530 6,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LM1-EPDM
Food Quality Hose
Application:
A flexible suction and discharge hose for use in
breweries and the food and beverage industries.
Suitable for use with alcohol (max. 40%) and soft
drinks, fatty (max. 36%) and non-fatty foods.
Temperature range: -35°C / +95°C. Steam cleaning
Feature: up to max. 130°C / 30 min, unpressurised.
White EPDM food quality tube with high Safety factor: 3.15 : 1
temperature resistance.
Tube: EPDM, white, smooth, food quality.
Tasteless, odourless, kink resistant, sturdy, very light. Reinforcement: Textile wrapped.
Standard/approval: Cover: SBR/NR/EPDM, red, abrasion resistant, ozone
BfR (former BgVV) XXI:2002 (Kat. 2), Weihen and weather resistant, cloth impression.
stephan, FDA (CFR 21 §177.2600). Marking: Continuous transfer tape, white:
Notice: "SEMPERIT S LM1-EPDM Brewer/Kellermeister D PN
Very high resistance to many aggressive cleaning 12 bar".
agents.
For the application of cleaning agents please see
our separate information sheet.
ATTENTION: Not suitable for dry conveyance.
Vacuum resistance; up to 50mm ID -0.5 bar; 65mm ID/75mm ID -0.4 bar, 80mm ID -0.3 bar, 100mm ID -0.2bar
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48256 1350 13,0 1/2 5,0 23,0 12 2 50 0,40 40
48256 1950 19,0 3/4 5,0 29,0 12 2 100 0,55 40
48256 2560 25,0 1 6,0 37,0 12 2 150 0,85 40
48256 3280 32,0 1 1/4 8,0 48,0 12 4 170 1,45 40
48256 3890 38,0 1 1/2 9,0 56,0 12 4 200 1,85 40
48256 4010 40,0 10,0 60,0 12 4 250 2,25 40
48256 5011 50,0 11,0 72,0 12 4 350 2,95 40
48256 6011 60,0 11,0 82,0 12 4 420 3,55 40
48256 6512 65,0 12,0 89,0 12 4 450 4,05 40
56256 7515 75,0 15,0 105,0 12 6 600 6,10 40
56256 8015 80,0 15,0 110,0 12 6 650 6,40 40
56256 0015 100,0 15,0 130,0 12 6 750 7,75 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LM1S-EPDM
Food Quality Hose
Application:
A flexible suction and discharge hose for use in
breweries and the food and beverage industries.
Suitable for use with alcohol (max. 40%), soft drinks,
fatty foods (max. 36%) and non-fatty foods.
Temperature range: -35°C / +95°C, steam cleaning
Feature: up to max. 130°C / 30 min, unpressurised.
White EPDM food quality tube, with high Safety factor: 3.15 : 1
temperature resistance.
Tube: EPDM, white, smooth, food quality.
Tasteless, odourless, kink resistant, sturdy, though ex Reinforcement: Textile wrapped, zinc plated steel wire
tremely light. helix.
Standard/approval: Cover: SBR/NR/EPDM, red, abrasion resistant, ozone
BfR (former BgVV) XXI:2002 (Kat. 2), Weihen and weather resistant, cloth impression.
stephan, FDA (CFR 21 §177.2600). Marking: Continuous transfer tape, white:
Notice: "SEMPERIT S LM1S-EPDM Brewer/Kellermeister SD
Very high resistance to many aggressive cleaning PN 12 bar".
agents.
For the application of cleaning agents please see
our separate information sheet.
ATTENTION: Not suitable for dry conveyance.
Date: 31.08.2007
LMU
Food Quality Hose
Application:
A flexible hose for suction and delivery applications,
used in food and beverage industries. Developed
especially for breweries, it is also suitable for use for
alcohol with concentration levels of up to 96%.
Temperature range: -35°C / +95°C steam cleaning
LMU is suitable for drinking water supply according up to max. 130°C / 30 min, unpressurised.
to WRC.
Safety factor: 3,15 : 1
Feature:
Tube: UPE, transparent, smooth, food quality, grease
Kink resistant, sturdy, though extremely light. resistant, suitable for drinking water
Tasteless, odourless. Reinforcement: Textile wrapped.
High temperature resistance. Cover: SBR/NR/EPDM, red, abrasion resistant, ozone
and weather resistant, cloth impression.
Standard/approval:
BfR (formerly BgVV) III:2002, MEBAK, Weihen Marking: Continuous transfer tape, white:
stephan, WRC (no. 0210524), FDA (CFR 21 "SEMPERIT S LMU - UPE Lebensmittel/Food D PN 12
§177.2600). bar".
Notice:
Very high resistance to many aggressive cleaning
agents.
For applications of cleaning agents, please see our
separate information sheet.
ATTENTION: Not suitable for dry conveyance.
Vacuum resistance up to 50 ID -0.5 bar; 65 ID -0.4 bar, 80 ID -0.3 bar, 100 ID -0.2bar
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56240 1350 13,0 1/2 5,0 23,0 12 2 60 0,45 40
56240 1950 19,0 3/4 5,0 29,0 12 2 120 0,55 40
56240 2560 25,0 1 6,0 37,0 12 2 170 0,90 40
56240 3280 32,0 1 1/4 8,0 48,0 12 4 190 1,30 40
56240 3890 38,0 1 1/2 9,0 56,0 12 4 200 1,95 40
56240 4010 40,0 10,0 60,0 12 4 250 2,30 40
56240 5011 50,0 11,0 72,0 12 4 350 3,20 40
56240 6512 65,0 12,0 89,0 12 4 450 4,35 40
56240 8015 80,0 15,0 110,0 12 6 650 6,50 40
56240 0015 100,0 15,0 130,0 12 6 750 7,90 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 29.05.2008
LMUS
Food Quality Hose
Application:
A flexible hose for suction and delivery applications,
used in food and beverage industries. Developed
especially for breweries, it is also suitable for use for
alcohol with concentration levels of up to 96%.
Temperature range: -35°C / +95°C steam cleaning
LMUS is suitable for drinking water supply accord up to max. 130°C / 30 min, unpressurised.
ing to WRC.
Safety factor: 3,15 : 1
Feature:
Tube: UPE, transparent, smooth, food quality, grease
LMUS is lighter and has a smaller bending radius resistant, suitable for drinking water
than LMU.
Reinforcement: Textile wrapped, zinc plated steel wire
Kink resistant, sturdy, though extremely light. helix, copper wire.
Tasteless, odourless. Cover: SBR/NR/EPDM, red, abrasion resistant, ozone
and weather resistant, cloth impression.
High temperature resistance.
Marking: Continuous transfer tape, white:
Standard/approval: "SEMPERIT S LMUS - UPE Lebensmittel/Food SD PN
BfR (formerly BgVV) III:2002, MEBAK, Weihen 12 bar".
stephan, WRC no. 0210524, FDA (CFR 21
§177.2600).
Notice:
Very high resistance to many aggressive cleaning
agents.
For applications of cleaning agents, please see our
separate information sheet.
ATTENTION: Not suitable for dry conveyance.
Date: 16.06.2009
LMB
Food Quality Hose
Application:
Premium quality brewery hose made of butyl rub
ber.
Ideal for delivering alcohol (max. 40%) and soft
drinks. For use in wine cellars and breweries, as
well as in the food industry. Temperature range: -35°C / +95°C, steam cleaning
up to max. 130°C / 30 min, unpressurised.
Feature:
Safety factor: 3,15 : 1
Odourless and tasteless.
Tube: Butyl rubber, white, smooth, food quality, odour
Standard/approval: less and tasteless.
FDA (CFR 21 §177.2600). Reinforcement: Textile wrapped.
Notice: Cover: Butyl rubber, red, resistant to abrasion, ozone
Not recommended for use with oily and fatty foods. and weather, cloth impression.
For such applications, we recommend LM3. Marking: Continuous transfer tape, white:
For the applications of cleaning agents, please see "SEMPERIT S LMB - Butyl Lebensmittel/Food D PN 12
our separate information sheet. bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56250 1955 19,0 3/4 5,5 30,0 12 2 120 0,48 40
56250 2565 25,0 1 6,5 38,0 12 2 160 0,74 40
56250 3280 32,0 8,0 48,0 12 4 200 1,25 40
56250 3880 38,0 1 1/2 9,0 56,0 12 4 240 1,59 40
56250 5110 51,0 2 10,0 71,0 12 4 310 2,16 40
56250 6312 63,5 2 1/2 12,3 88,0 12 4 400 3,80 40
56250 7612 76,0 3 12,5 101,0 12 6 500 4,30 40
56250 0015 102,0 4 15,0 132,0 12 6 600 6,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LMBS
Food Quality Hose
Application:
Premium quality brewery suction and discharge
hose made of butyl rubber.
Ideal for delivering alcohol (max. 40%) and soft
drinks. For use in wine cellars and breweries, as
well as in the food industry. Temperature range: -35°C / +95°C, steam cleaning
up to max. 130°C / 30 min, unpressurised.
Feature:
Safety factor: 3,15 : 1
Odourless and tasteless.
Tube: Butyl rubber, white, smooth, food quality, odour
Standard/approval: less and tasteless.
FDA (CFR 21 §177.2600). Reinforcement: Textile wrapped, double steel wire
Notice: helix.
Available in other colours on request. Cover: Butyl rubber, red, resistant to abrasion, ozone
and weather, cloth impression.
Available with corrugated cover on request.
Marking: Continuous transfer tape, white:
Not suitable for oily or fatty foods. For such applica "SEMPERIT S LMBS - Butyl Lebensmittel/Food SD PN
tions, we recommend LM4S. 12 bar".
For the applications of cleaning agents, please see
our separate information sheet.
ATTENTION: Not suitable for dry conveyance.
Date: 31.08.2007
LMW - AQUALINE®
Drinking Water Hose
Application:
A flexible high quality hose used for pressure appli-
cations in the food and beverage industries.
Developed especially for drinking water, LMW-
Aqualine® is approved according to DVGW work Temperature range: -35°C / +95°C, drinking water
sheet W270 and KTW (Kat.A), tested on the hose up to +40°C, steam cleaning with max. 130°C / 30
and thus product-approved and certified. min, unpressurised.
Feature: Safety factor: 3.15 : 1
Hygienic, microbiologically harmless. Tube: UPE, transparent, smooth, food quality, grease
Kink resistant and robust yet light weight. resistant, approved for drinking water.
Taste and odour neutral. Reinforcement: Textile wrapped.
High temperature resistance. Cover: EPDM, blue, abrasion resistant, limited grease
and oil resistance, cloth impression.
Standard/approval: Marking: Continuous transfer tape, white:
KTW (Kat. A), DVGW W270. "SEMPERIT S LMW - AQUALINE® Trinkwasser PN
20bar KTW A, DVGW-W270".
Notice:
AQUALINE ® is a registered trademark of SEMPER
IT. Hoses designated AQUALINE ® must not be ob
tained from or sold to private consumers.
ATTENTION: Drinking water hoses have to be
cleaned and flushed before first use.
Very high resistance to many aggressive cleaning
agents. For the application of cleaning agents
please see our separate information sheet.
Additional diameters available on request.
ATTENTION: Not suitable for dry conveyance.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48254 1336 13,0 1/2 3,6 20,2 20 2 60 0,30 40
48254 1942 19,0 3/4 4,2 27,4 20 2 90 0,40 40
48254 2545 25,0 1 4,5 34,0 20 2 130 0,60 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LME Milkyline
Hose for milk collection trucks
Application:
Highly flexible spiral suction and delivery hose for
filling and discharging milk tankers, but also for use
in the food and drinks industry for conveying alco
holic or non-alcoholic beverages.
Feature: Temperature range: -35°C / +80°C steam cleaning
up to max. 130°C / 30 min, unpressurised.
Extremely flexible due to special rubber materials
and design of reinforcements. Safety factor: 3.15 : 1
Standard/approval: Tube: NR, white, smooth, food quality.
BfR (former BgVV) XXI:2002 (Kat. 3), FDA (CFR 21 Reinforcement: Textile wrapped, zinc plated steel wire
§177.2600) helix.
Notice: Cover: NR, blue, abrasion resistant, weather resistant,
cloth impression.
Smooth tube allows for easy cleaning. For the ap
plication of cleaning agents please see our Marking: Continuous transfer tape, white:
separate information sheet. "SEMPERIT S LME MILKYLINE - NR Dairy/Milch SD
PN 6 bar".
ATTENTION: not suitable for dry conveyance.
Date: 31.08.2007
LM2
Hose for milk collection trucks
Application:
Flexible spiral suction and delivery hose for filling
and discharging milk tankers. Also suitable for use in
the food and drinks industry for conveying alcoholic
and soft drinks such as wine, beer, fruit juices,
mineral water. Temperature range: -35°C / +80°C steam cleaning
Feature: up to max. 130°C / 30 min, unpressurised.
Uniquely resistant to mechanical wear and weather Safety factor: 3.15 : 1
ing. Tube: NR, white, smooth, food quality.
Standard/approval: Reinforcement: Textile wrapped; zinc plated steel wire
BfR (former BgVV) XXI:2002 (Kat.3), FDA (CFR 21 helix.
§177.2600). Cover: CSM, blue, abrasion resistant, weather resist
Notice: ant, cloth impression.
Smooth tube allows for easy cleaning. For the ap Marking: Continuous transfer tape, white:
plication of cleaning agents please see our "SEMPERIT S LM2 - NR Dairymate/Milchmeister SD
separate information sheet. PN 6 bar".
ATTENTION: Not suitable for dry conveyance.
Date: 31.08.2007
LM4S / SF 1500
Fatty Goods Hose
Application:
Flexible suction and discharge hose with wire helix,
for filling and discharging fatty goods.
Suitable for use with animal and vegetable oils and
fats.
Temperature range: -35°C / +80°C steam cleaning
Suitable for use in the food and drinks industry for up to max. 130°C / 30 min, unpressurised.
conveying milk and dairy products. Safety factor: 3.15 : 1
Standard/approval: Tube: NBR, white, smooth, food quality, grease and oil
BfR (former BgVV) XXI:2002 (Kat. 2), FDA (CFR 21 resistant.
§ 177.2600). Reinforcement: Textile braided, (up to 53mm),
Notice: wrapped (65mm and above), zinc plated steel wire
Smooth tube allows for easy cleaning. For the ap helix.
plication of cleaning agents, please refer to our sep Cover: NVC, blue, resistant to abrasion and ageing,
arate information sheet. cloth impression.
ATTENTION: Not suitable for dry conveyance. Marking: Continuous transfer tape, white:
"SEMPERIT S LM4S/SF 1500 - NBR Lebensmittel/
Fatty Goods SD PN 10 bar".
Date: 11.12.2008
LM3
Multi-Purpose Food Quality Hose
Application:
Suitable for cleaning in dairies, food production
plants and slaughterhouses as a steam, hot water
and cold water hose.
Also for conveying liquid food stuffs, in particular Temperature range: -35°C / +95°C hot water
milk and dairy products, animal and vegetable oils / +164°C saturated steam.
and fats.
Safety factor: Steam: 10 : 1, hot water: 3.15 : 1
Standard/approval:
Tube: NBR, white, smooth, food quality, grease and oil
BfR (former BgVV) XXI:2002 (Kat.2), FDA (CFR 21 resistant.
§ 177.2600).
Reinforcement: Textile wrapped.
Notice:
Cover: NVC, blue, grease and oil resistant, cloth im
To meet the high demands associated with continu pression.
ous steam operation we recommend DS1, DSE or
DS3 hoses. Marking: Continuous transfer tape, white:
"SEMPERIT S LM3 - NBR Lebensmittel/Dampf/Food/
Very high resistance to many aggressive cleaning Steam D PN 6 bar 164°C Dampf".
agents.
For the application of cleaning agents, please refer
to our separate information sheet.
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m
48244 1350 13,0 1/2 5,0 23,0 6 18 2 80 0,38 40
48244 1650 16,0 5/8 5,0 26,0 6 18 2 95 0,44 40
48244 1960 19,0 3/4 6,0 31,0 6 18 2 115 0,62 40
48244 2570 25,0 1 7,0 39,0 6 18 2 150 0,91 40
48244 3270 32,0 7,0 46,0 6 18 2 195 1,10 40
48244 3890 38,0 9,0 56,0 6 18 2 230 1,65 40
48244 4090 40,0 9,0 58,0 6 18 2 240 1,70 40
48244 5010 50,0 10,0 70,0 6 18 2 300 2,35 40
48244 6512 65,0 12,0 89,0 6 18 4 390 3,70 40
48244 7512 75,0 12,0 99,0 6 18 4 450 4,10 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LMD
Cleaning Hose
Application:
Suitable for steam and hot water cleaning purposes
and for conveying liquid products such as milk.
Suitable for use in dairies, slaughterhouses and in
the food industry. Temperature range: -35°C / +95°C hot water
Standard/approval: / +164°C saturated steam.
BfR (former BgVV) XXI:2002 (Kat.2), FDA (CFR 21 Safety factor: Steam: 10 : 1, hot water: 3.15 : 1
§177.2600). Tube: EPDM, white, smooth, food quality, resistant to
Notice: temperature and cleaning agents.
For applications of cleaning agents, please see our Reinforcement: Textile wrapped.
separate information sheet. Cover: EPDM, blue, resistant to abrasion, grease and
oil, cloth impression.
Marking: Continuous transfer tape, white:
"SEMPERIT S LMD - EPDM Lebensmittel/Dampf/
Food/Steam PN 6 bar 164°C Dampf".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m
48245 1350 13,0 1/2 5,0 23,0 6 18 2 90 0,38 40
48245 1360 13,0 1/2 6,0 25,0 6 18 2 90 0,42 40
48245 1660 16,0 5/8 6,0 28,0 6 18 2 100 0,50 40
48245 1955 19,0 3/4 5,5 30,0 6 18 2 120 0,60 40
48245 1960 19,0 3/4 6,0 31,0 6 18 2 120 0,65 40
48245 2560 25,0 1 6,0 37,0 6 18 2 160 0,80 40
48245 2565 25,0 1 6,5 38,0 6 18 2 160 0,88 40
48245 2570 25,0 1 7,0 39,0 6 18 2 160 0,96 40
48245 3270 32,0 7,0 46,0 6 18 2 200 1,20 40
48245 3880 38,0 8,0 54,0 6 18 4 240 1,63 40
48245 5185 51,0 2 8,5 68,0 6 18 4 310 2,12 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LMH
Cleaning Hose
Application:
Suitable for washing and cleaning with hot water in
dairies, food production plants and paper mills
where wear-resistant hoses that withstand higher
pressures and temperatures of up to +95°C are
needed. Temperature range: -35°C / +95°C up to +130°C
for short periods.
Standard/approval:
Safety factor: 4 : 1
BfR (BgVV) XXI:2002 (Kat.2), FDA (CFR 21
§177.2600). Tube: EPDM, white, smooth, food quality, resistant to
temperature and cleaning agents.
Notice:
Reinforcement: Textile wrapped.
Other colours available on request.
Cover: EPDM, blue, resistant to abrasion, grease and
Oil resistant cover available on request. oil, cloth impression.
Not suitable for use with pure steam. Marking: Continuous transfer tape, white:
For the application of cleaning agents, please refer "SEMPERIT S LMH - EPDM Lebensmittel/Heisswasser
to our separate information sheet. Food/Hot Water PN 10 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48243 1345 13,0 1/2 4,5 22,0 10 2 90 0,30 40
48243 1650 16,0 5/8 5,0 26,0 10 2 100 0,42 40
48243 1955 19,0 3/4 5,5 30,0 10 2 120 0,51 40
48243 2565 25,0 1 6,5 38,0 10 2 160 0,78 40
48243 3280 32,0 1 1/4 8,0 48,0 10 2 220 1,20 40
48243 3885 38,0 1 1/2 8,5 55,0 10 2 250 1,50 40
48243 5190 51,0 2 9,0 69,0 10 4 320 2,10 40
48243 6312 63,5 2 1/2 12,7 89,0 10 4 410 3,50 40
56243 7612 76,0 3 12,5 101,0 10 4 460 4,15 40
56243 0015 102,0 4 15,0 132,0 10 4 530 6,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LOSP - G
Silo Hose
Application:
Foodstuff delivery hose for filling and discharging
silos and silo vehicles.
For conveying dry and dusty foodstuffs.
Feature:
High-quality mix used for tube and cover. Temperature range: Tube up to +80°C, hose flexible
down to -35°C, steam cleaning up to max. 130°C /
Antistatic tube and conductive cover (according to 30 min.
EN ISO 8031:1997) prevent sudden discharge if Safety factor: 3,15 : 1
the conveyed medium and/or hose become(s)
electrically charged. Tube: NBR, light-coloured, smooth, abrasion resistant,
antistatic, oil resistant.
Can be used in explosive atmospheres as defined
in Directive 94/9/EC (ATEX 95). Reinforcement: Textile wrapped, 2 crossed copper
wires
Standard/approval:
Cover: CR, black, smooth, electrically conductive, abra
BfR (formerly BgVV) XXI:2002 (Kat. 4). sion resistant, oil and weather resistant, cloth impres
Notice: sion.
For the application of cleaning agents, please see Marking: Continuous transfer tape, white:
our separate information sheet. "SEMPERIT S LOSP-G NBR antistatic Lebensmittel trock
en / Dry Food / Silo D PN 6 bar ".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48297 5075 50,0 7,5 65,0 6 2 350 1,85 40
48297 7590 75,0 9,0 93,0 6 2 550 3,10 40
56297 9010 90,0 10,0 110,0 6 2 650 4,00 40
56297 0011 100,0 11,0 122,0 6 2 750 5,00 40
56297 0312 125,0 12,0 149,0 6 4 950 6,45 40
56297 0612 150,0 12,0 174,0 6 4 1200 7,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LMSP - G
Silo Hose
Application:
Foodstuff suction and delivery hose for filling and
discharging silos and silo vehicles.
For conveying dry and dusty foodstuffs.
Feature:
High-quality mix used for tube and cover. Temperature range: Tube up to +80°C, hose flexible
down to -35°C, steam cleaning up to max. 130°C /
Antistatic tube and conductive cover (according to 30 min.
EN ISO 8031:1997) prevent sudden discharge if Safety factor: 3,15 : 1
the conveyed medium and/or hose become(s)
electrically charged. Tube: NBR, light-coloured, smooth, abrasion resistant,
antistatic, oil resistant.
Can be used in explosive atmospheres as defined
in Directive 94/9/EC (ATEX 95). Reinforcement: Textile wrapped, 2 crossed copper
wires, zinc plated steel wire helix.
Standard/approval:
Cover: CR, black, smooth, electrically conductive, abra
BfR (formerly BgVV) XXI:2002 (Kat. 4). sion resistant, oil and weather resistant, cloth impres
Notice: sion.
If using cleaning agents, please refer to our separ Marking: Continuous transfer tape, white:
ate information sheet. "SEMPERIT S LMSP-G NBR antistatic Lebensmittel
trocken/Dry Food/ Silo SD PN 6 bar ".
Date: 31.08.2007
LMSP
Silo Hose
Application:
Low cost, silo hose for filling and discharging silos
and silo vehicles.
For conveying dry and dusty foodstuffs, animal feed
and grain.
ATTENTION: risk of explosion. As the tube material Temperature range: -35°C / +80°C steam cleaning
is insulated, the conveyed medium and/or the hose up to max. 130°C / 30 min, unpressurised.
may become electrically charged. For such applica Safety factor: 3.15 : 1
tions, we recommend LMSP - G. Tube: NR, white, smooth, food quality, insulating.
Standard/approval: Reinforcement: Textile wrapped, double wire helix,
BfR (BgVV) XXI:2002 (Kat. 3). copper wire.
Notice: Cover: SBR, black, resistant to abrasion, ozone and
weather, cloth impression.
On request:
- Beige tube. Marking: Continuous transfer tape, white:
- Vulcanised flange "SEMPERIT S LMSP - NR isolierend/isolating Lebens
- Special hose ends mittel trocken/Dry Food Silo SD PN 6 bar".
- Corrugated cover.
For the application of cleaning agents, please refer
to our separate information sheet.
ATTENTION: For light -coloured granulated plastics
and milk powder, we recommend LMSP-G with an
antistatic tube.
Date: 30.04.2008
LOSP
Silo Hose
Application:
Low cost, abrasion resistant silo hose for filling and
discharging silos and silo vehicles.
For conveying dry and dusty foodstuffs, animal feed
and grain.
Temperature range: -35°C / +80°C steam cleaning
ATTENTION: risk of explosion. As the tube material up to max. 130°C / 30 min, unpressurised.
is insulating, the conveyed medium and/or hose
may become electrically charged. For such applica Safety factor: 3.15 : 1
tions, we recommend LOSP - G. Tube: NR, white, smooth, food quality, insulating.
Standard/approval: Reinforcement: Textile wrapped, copper wire.
BfR (former BgVV) XXI:2002 (Kat. 3). Cover: SBR, black, antistatic, resistant to abrasion and
Notice: weather, cloth impression.
Smooth tube allows for easy cleaning. Marking: Continuous transfer tape, silver:
"SEMPERIT S LOSP - NR isolierend/isolating Lebensmit
For the application of cleaning agents, please refer tel trocken/Dry Food Silo D PN 6 bar".
to our separate information sheet. Beige tube on re
quest.
ATTENTION: For light-coloured granulated plastics
and milk powder, we recommend LMSP-G, with an
tistatic tube.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48296 7540 75,0 4,0 83,0 6 2 - 1,15 40
48296 7590 75,0 9,0 93,0 6 2 550 2,88 40
56296 9040 90,0 4,0 98,0 6 2 - 1,65 40
56296 0011 100,0 11,0 122,0 6 2 750 5,00 40
56296 0145 110,0 4,5 119,0 6 2 - 2,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LMF
Fish Pump Hose
Application:
Suitable for use with most types of pump in the fish
ing industry.
Feature:
A lightweight hose which can be rolled flat for trans Temperature range: -35°C / +80°C
port and storage. Safety factor: 3 : 1
Notice: Tube: NBR, black, smooth, resistant to abrasion, grease
ATTENTION: It is vital to be aware of the different and oil.
working pressures. Reinforcement: Textile wrapped.
Cover: CR, black, resistant to abrasion, fat, oil, ozone,
weather and sea water, cloth impression.
Marking: Continuous transfer tape, white:
"SEMPERIT S LMF - NBR Fisch/Fish Pump".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
56115 0840 203,0 8 4,0 211,0 5 2 4,0 40,0
56115 1040 254,0 10 4,0 262,0 5 2 5,2 40,0
56115 1245 305,0 12 4,5 314,0 5 2 6,2 15,5
56115 1450 355,0 14 5,0 365,0 4 2 7,3 15,5
56115 1645 409,0 16 4,5 418,0 4 2 8,3 15,5
56115 1850 457,0 18 5,0 467,0 3 2 9,3 15,5
56115 2050 510,0 20 5,0 520,0 3 2 10,5 15,5
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PL0
Air/Water Hose
Application:
A flexible hose for the transport of compressed air
and water for building sites, garages, filling stations
and car repair workshops, under difficult condi
tions.
Temperature range: -30°C / +70°C.
For high pressure applications.
Safety factor: 4 : 1
Norm/Zulassung:
Tube: SBR/NR, black, smooth, suitable for oil-laden air.
EN ISO 2398 1A:1997
Reinforcement: Textile spiral construction (ID > 25mm
Notice: wrapped).
Larger dimensions available on request. Cover: SBR/EPDM, black, smooth (ID > 25mm SBR,
cloth impression).
Marking: Continuous coloured marking, white:
"SEMPERIT S PL0 Druckluft/Wasser Air/Water Heavy
Duty WP 20 bar/BP 80 bar", ID > 25: continuous
transfer tape, blue.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68441 0435 4,0 3,5 11,0 20 2 35 0,12 50
68441 0528 5,3 2,8 11,0 20 2 44 0,10 50
68441 0835 8,0 5/16 3,5 15,0 20 2 72 0,18 50
68441 0840 8,0 5/16 4,0 16,0 20 2 72 0,22 50
68441 1040 10,0 3/8 4,0 18,0 20 2 91 0,26 50
68441 1650 16,0 5/8 5,0 26,0 20 2 220 0,48 50
68441 1955 19,0 3/4 5,5 30,0 20 2 290 0,62 50
68441 2560 25,0 1 6,0 37,0 20 2 350 0,90 50
48423 3055 30,0 5,5 41,0 20 2 400 0,85 40
48423 3860 38,0 1 1/2 6,0 50,0 20 2 450 1,20 40
48423 5080 50,0 8,0 66,0 20 4 500 1,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PL1
Air/Water Hose
Application:
Suitable for delivering compressed air and water in
power plant, road construction, tunneling and quar
rying.
Feature: Temperature range: -30°C / +80°C.
Easily identified due to distinctive colour. Safety factor: 3 : 1
Tube: SBR/NR, black, smooth, suitable for oil-laden air.
Reinforcement: Textile spiral construction (ID > 25mm
wrapped).
Cover: SBR/NR, yellow, smooth, abrasion resistant (ID
> 25mm, cloth impression).
Marking: Continuous coloured marking, black:
"SEMPERIT S PL1 Druckluft/Wasser Air/Water Mam
mut WP 20 bar/BP 60 bar",ID > 25: continuous trans
fer tape, blue.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68416 1350 13,0 1/2 5,0 23,0 20 2 80 0,43 50
68416 1950 19,0 3/4 5,0 29,0 20 2 150 0,52 50
68416 1955 19,0 3/4 5,5 30,0 20 2 150 0,59 50
68416 1960 19,0 3/4 6,0 31,0 20 2 150 0,65 50
68416 2560 25,0 1 6,0 37,0 20 2 185 0,82 50
68416 2570 25,0 1 7,0 39,0 20 2 185 1,00 50
48426 3260 32,0 1 1/4 6,0 44,0 20 2 260 1,15 40
48426 3860 38,0 1 1/2 6,0 50,0 20 2 350 1,05 40
48426 5080 50,0 8,0 66,0 20 4 400 2,30 40
48426 5010 50,0 10,0 70,0 20 4 330 3,00 40
48426 5380 53,0 8,0 69,0 20 4 420 2,45 40
48426 5310 53,0 10,0 73,0 20 4 350 3,10 40
48426 6310 63,5 2 1/2 10,0 83,5 20 4 480 2,90 40
48426 7510 75,0 3 10,5 96,0 20 4 610 3,50 40
56426 1014 101,6 4 14,0 129,6 20 8 720 6,60 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 24.02.2010
PL1S
Air/Water Hose
Application:
A flexible air and water hose for use in industry,
commerce and on construction sites.
Standard/approval:
EN ISO 2398:1997 1A. Temperature range: -30°C / +80°C.
Notice: Safety factor: 3 : 1
Larger dimensions available on request. Tube: SBR/NR, black, smooth, suitable for oil-laden air.
Reinforcement: Textile spiral construction (ID > 25mm,
wrapped).
Cover: SBR/EPDM, black, smooth, weather resistant,
(ID > 32mm SBR, cloth impression).
Marking: Continuous coloured marking, white:
"SEMPERIT S PL1S Druckluft/Wasser Air/Water WP
20 bar/BP 60 bar", ID > 25mm: continuous transfer
tape, blue.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68440 0532 5,0 3/16 3,2 11,4 20 2 45 0,11 50
68440 0640 6,0 1/4 4,0 14,0 20 2 60 0,17 50
68440 0636 6,3 3,2 12,7 20 2 60 0,13 50
68440 0832 8,0 3,2 14,4 20 2 80 0,16 50
68440 0840 8,0 4,0 16,0 20 2 80 0,22 50
68440 0845 8,0 5/16 4,5 17,0 20 2 80 0,24 50
68440 1035 10,0 3/8 3,5 17,0 20 2 100 0,21 50
68440 1045 10,0 3/8 4,5 19,0 20 2 100 0,27 50
68440 1340 12,5 1/2 4,0 20,5 20 2 75 0,28 50
68440 1345 13,0 4,5 22,0 20 2 80 0,34 50
68440 1645 16,0 5/8 4,5 25,0 20 2 100 0,39 50
68440 1935 19,0 3/4 3,5 26,0 20 2 120 0,34 50
68440 1950 19,0 3/4 5,0 29,0 20 2 120 0,49 50
68440 1955 19,0 3/4 5,5 30,0 20 2 120 0,57 50
68440 2550 25,0 1 5,0 35,0 20 2 150 0,63 50
68440 2560 25,0 1 6,0 37,0 20 2 150 0,79 50
68440 3265 32,0 6,5 45,0 20 2 190 1,07 50
48425 3860 38,0 1 1/2 6,0 50,0 20 2 350 1,20 40
48425 4060 40,0 6,0 52,0 20 2 400 1,20 40
48425 5070 50,0 7,0 64,0 20 4 500 1,55 40
48425 7510 75,0 10,0 95,0 20 4 650 2,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PL2 / DIN
Air/Water Hose
Application:
Suitable for the delivery of lubricant-laden com
pressed air at a working pressure of 10 bar, and
water, at a working pressure of 16 bar.
For use in industry and commerce. Temperature range: -30°C / +70°C.
Standard/approval: Safety factor: Water: 2,5 : 1; Compressed air: 4 : 1
DIN 20018-1:2003. Tube: SBR, black, smooth, suitable for oil-laden air.
Notice: Reinforcement: Textile spiral construction, (ID > 25mm,
Hose is not suitable for the use in mines; for mining wrapped).
applications we recommend P16, P40, P100. Cover: SBR, black, smooth, resistant to weather, (ID >
25mm, cloth impression).
Marking: Continuous coloured marking, white:
"SEMPERIT S PL2 Druckluft/Wasser Air/Water DIN
20018 quarter/year PN 10/16 bar", ID > 25mm:
continuous transfer tape, silver, labelling tape: "ID..
quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Air Water inserts (min.) in mm approx. kg/m (max.) m
68417 1350 13,0 1/2 5,0 23,0 10 16 2 80 0,40 50
68417 1560 15,0 6,0 27,0 10 16 2 100 0,57 50
68417 1960 19,0 3/4 6,0 31,0 10 16 2 150 0,68 50
68417 2570 25,0 1 7,0 39,0 10 16 2 185 1,00 50
68427 2560 25,0 1 6,0 37,0 10 16 2 175 0,82 50
48427 3280 32,0 1 1/4 8,0 48,0 10 16 2 210 1,30 40
48427 3880 38,0 1 1/2 8,0 54,0 10 16 2 240 1,50 40
48427 5310 53,0 10,0 73,0 10 16 4 350 2,45 40
48427 6511 65,0 11,0 87,0 10 16 4 450 3,30 40
56427 8512 85,0 12,0 109,0 10 16 4 600 4,90 40
56427 1114 105,0 14,0 133,0 10 16 6 750 6,80 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PLE / PL15
Air / Water Hose
Application:
Suitable for the delivery of lubricant-laden com
pressed air and water at a working pressure of 15
bar.
For use in industry and commerce. Temperature range: -35°C / +70°C.
Feature: Safety factor: 3 : 1
Excellent value for money. Tube: SBR, black, smooth, suitable for oil-laden air.
Notice: Reinforcement: Textile spiral construction, (ID > 25mm,
Other dimensions available on request. wrapped).
Cover: SBR, black, smooth, (ID > 25mm, cloth impres
sion).
Marking: Continuous colour marking, white:
"SEMPERIT S PLE/PL15 Luft/ Wasser Air/Water WP
15 bar/BP 45 bar", ID > 25 continuous in transfer
tape, silver.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68056 0630 6,0 1/4 3,0 12,0 15 2 60 0,11 50
68056 0835 8,0 5/16 3,5 15,0 15 2 80 0,17 50
68056 0935 9,0 3,5 16,0 15 2 90 0,19 50
68056 1035 10,0 3/8 3,5 17,0 15 2 100 0,22 50
68056 1335 13,0 1/2 3,5 20,0 15 2 100 0,26 50
68056 1340 13,0 4,0 21,0 15 2 130 0,31 50
68056 1635 16,0 5/8 3,5 23,0 15 2 160 0,31 50
68056 1650 16,0 5/8 5,0 26,0 15 2 160 0,49 50
68056 1935 19,0 3/4 3,5 26,0 15 2 120 0,36 50
68056 1950 19,0 3/4 5,0 29,0 15 2 190 0,55 50
68056 1960 19,0 3/4 6,0 31,0 15 2 220 0,64 50
68056 2040 20,0 4,0 28,0 15 2 200 0,44 50
68056 2045 20,0 4,5 29,0 15 2 200 0,51 50
68056 2050 20,0 5,0 30,0 15 2 200 0,58 50
68056 2540 25,0 1 4,0 33,0 15 2 250 0,53 50
68056 2550 25,0 1 5,0 35,0 15 2 250 0,70 50
48413 3055 30,0 5,5 41,0 15 2 200 0,93 40
48413 3255 32,0 1 1/4 5,5 43,0 15 2 210 0,95 40
48413 3560 35,0 6,0 47,0 15 2 250 1,05 40
48413 5070 50,0 7,0 64,0 15 4 350 1,54 40
48413 7580 75,0 8,0 91,0 15 4 600 2,64 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PLD
Compressed Air Hose
Application:
A robust compressed air hose for lubricant-laden
compressed air.
Suitable for use in quarries, surface mining and
road construction. Temperature range: -35°C / +80°C.
Feature: Safety factor: 3,15 : 1
The steel wire reinforcement makes the hose suit Tube: SBR, black, smooth, suitable for oil-laden air.
able for high pressure and heavy duty applications.
Reinforcement: Steel wire braided.
Easily identified due to distinctive colour.
Cover: SBR/EPDM, yellow, resistant to abrasion and
Notice: weather, cloth impression.
Black cover available on request. Marking: Continuous labelling tape:
"SEMPERIT S compressed air wire braid Luna PN
40bar"
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48400 2664 25,4 1 6,4 38,2 40 1 125 1,15 40
48400 3875 38,0 1 1/2 7,5 53,0 40 2 190 2,30 40
48400 5180 50,8 2 8,0 66,8 40 2 260 3,00 40
48400 7690 76,2 3 9,0 94,2 40 2 450 3,95 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PLB
Air / Water Hose
Application:
Pressure hose for conveying compressed air and
service water in industry, commerce and repair
workshops.
Feature: Temperature range: -30°C / +90°C.
Non-marking, smooth cover. Safety factor: 4 : 1
Tube: EPDM, black, smooth, electrically conductive.
Reinforcement: Textile spiral construction.
Cover: NVC/NR, blue, smooth, oil and grease resist
ant, weather resistant, insulating.
Marking: Continuous coloured marking, black:
"SEMPERIT S PLB AIR/WATER 20 BAR quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68266 1345 13,0 1/2 4,5 22,0 20 2 80 0,37 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
PBS
Air / Water Hose
Application:
Pressure hose for conveying compressed air and
service water in industry, commerce and construc
tion industry.
Feature: Temperature range: -30°C / +80°C.
Easily distinguishable due to blue stripes. Safety factor: 3 : 1
Standard/approval: Tube: SBR/NR, black, smooth, suitable for oil-laden air.
EN ISO 2398 - 1A:1997. Reinforcement: Textile spiral construction.
Cover: SBR/EPDM, black, smooth, blue stripes, weath
er resistant.
Marking: Continuous coloured marking, white:
"SEMPERIT S PBS 60 Druckluft/Wasser Air/Water
WP 20 bar/BP 60 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68447 1650 16,0 5/8 5,0 26,0 20 2 100 0,45 50
68447 1950 19,0 3/4 5,0 29,0 20 2 120 0,49 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
P16
Mining Hose
Application:
A robust water and compressed air hose for heavy
duty use in underground mining.
Feature:
Suitable for lubricant-laden compressed air and for Temperature range: -35°C / +80°C.
water. Safety factor: Water 2.5: 1, Air 4: 1
Cover and tube made of flame retardant rubber in Tube: CR, black, smooth, electrically conductive, suit
accordance with German LOBA directives. able for oil-laden air.
Standard/approval: Reinforcement: Textile wrapped.
EN ISO 2398:1997 Type A, DIN 20018-1:2003, Cover: CR, black, electrically conductive, resistant to
LOBA. abrasion, oil and weather, flame retardant, cloth im
Notice: pression.
ATTENTION: It is vital to be aware of the different Marking: Continuous labelling tape:
working pressures for compressed air and water. "SEMPERIT S Mammut-F S DN PN 10/16 DIN
20018 quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Air Water inserts (min.) in mm approx. kg/m (max.) m
48420 1350 13,0 1/2 5,0 23,0 10 16 2 80 0,40 40
48420 1560 15,0 6,0 27,0 10 16 2 100 0,50 40
48420 1960 19,0 3/4 6,0 31,0 10 16 2 150 0,60 40
48420 2570 25,0 1 7,0 39,0 10 16 2 185 0,85 40
48420 3580 35,0 13/8 8,0 51,0 10 16 2 220 1,35 40
48420 4290 42,0 9,0 60,0 10 16 4 260 1,70 40
48420 5310 53,0 10,0 73,0 10 16 4 350 2,30 40
48420 6511 65,0 11,0 87,0 10 16 4 450 3,15 40
56420 8512 85,0 12,0 109,0 10 16 4 600 5,00 20
56420 1114 105,0 14,0 133,0 10 16 6 750 6,90 20
56420 0616 150,0 16,0 182,0 10 16 8 1000 11,65 10
56420 0818 200,0 18,0 236,0 10 16 10 1400 17,00 10
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 12.02.2009
P40
Mining Hose
Application:
A robust high pressure water and compressed air
hose for heavy duty use in underground mining.
Feature:
Suitable for lubricant-laden compressed air and for Temperature range: -35°C / +80°C.
water. Safety factor: Water 2.5: 1, Air 4: 1
Cover and tube made of flame retardant rubber in Tube: CR, black, smooth, electrically conductive, suit
accordance with the German LOBA directives. able for oil-laden air.
Standard/approval: Reinforcement: Textile wrapped.
DIN 20018-2:2003, LOBA. Cover: CR, black, electrically conductive, resistant to
Notice: abrasion, oil and weather, flame retardant, cloth im
pression.
ATTENTION: It is vital to be aware of the different
working pressures for compressed air and water. Marking: Continuous labelling tape:
"S Mammut F-S DN PN 25/40 DIN 20018 quarter/
year" and continuous transfer tape, green: "SEMPERIT
S".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Air Water inserts (min.) in mm approx. kg/m (max.) m
48424 1902 19,0 3/4 6,0 31,0 25 40 2 150 0,60 20
48424 2570 25,0 1 7,0 39,0 25 40 2 185 0,90 40
48424 5310 53,0 10,0 73,0 25 40 4 350 2,50 40
48424 5302 53,0 10,0 73,0 25 40 4 350 2,50 20
48424 6511 65,0 11,0 87,0 25 40 4 450 3,15 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
P100
Mining Hose
Application:
A robust high-pressure water and compressed air
hose for heavy-duty use in underground mining.
Feature:
Cover and tube made of flame retardant rubber in Temperature range: -35°C / +80°C.
accordance with the German LOBA directives. Safety factor: Water: 2.5 : 1, Air: 5 : 1
Standard/approval: Tube: SBR/CR, black, smooth, electrically conductive.
DIN 20018-3:2003, LOBA. Reinforcement: Textile braided.
Notice: Cover: CR, black, electrically conductive, resistant to
ATTENTION: It is vital to be aware of the different abrasion, oil and weather, flame retardant, cloth im
working pressures for compressed air and water. pression.
Marking: Continuous labelling tape:
"S Mammut F-S DN PN 50/100 DIN 20018
quarter/year" and continuous transfer tape, red: "SEM
PERIT S".
Article number Internal-Ø in Wall width External-Ø Work. pressure (max.) bar Number of Bending radius Weight Coil length
mm inches in mm in mm Air Water inserts (min.) in mm approx. kg/m (max.) m
48422 1360 13,0 1/2 6,0 25,0 50 100 1 80 0,50 40
48422 1565 15,0 6,5 28,0 50 100 1 100 0,60 40
48422 1970 19,0 3/4 7,0 33,0 50 100 1 150 0,80 40
48422 2570 25,0 1 7,0 39,0 50 100 2 185 1,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
LOBA SD
Mining Hose
Application:
Water hose for suction and pressure applications in
mining.
Feature:
Cover and tube made of flame retardant rubber in Temperature range: -35°C / +80°C.
accordance with the German LOBA directives.
Safety factor: 3,15 : 1
Standard/approval:
Tube: CR, black, smooth, electrically conductive, suit
LOBA. able for oil-laden air.
Notice: Reinforcement: Textile wrapped, zinc plated steel wire
helix.
The hose is available in various lengths with sleeve
couplings. Cover: CR, black, corrugated, electrically conductive,
resistant to abrasion, oil and weather resistant, flame
Other lengths and dimensions available on request. retardant.
Marking: Embossed branding on the sleeve couplings:
"S Mammut F Spiral SD DN PN.. quarter/year".
Date: 10.12.2009
PAB
Air Tube
Application:
Flexible delivery hose for transporting air for breath
ing.
Standard/approval:
EN 14593-1,2:2005. Temperature range: -40°C / +80°C
EN 14594:2005. Safety factor: 4 : 1
Tube: SBR, black, smooth.
Reinforcement: Textile spiral construction.
Cover: SBR/CR, black, smooth.
Marking: Continuous coloured marking, white:
"SEMPERIT S PAB EN 14593 ANTISTATIC HEAT RES
ISTANT 2005 CE 1024 BREATHING AIR". Addition
ally: 3 red longitudinal stripes.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68170 0747 7,0 4,7 16,4 12 1 50 0,24 60
68170 0843 8,0 4,3 16,6 12 1 60 0,23 60
68170 1043 10,0 4,3 18,6 12 1 70 0,27 60
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 02.02.2010
FHKS
Hot Air Compressor Hose
Application:
A compressor hose for use with silo vehicles as a
connecting hose between the discharge com
pressor and the silo.
Feature: Temperature range: -40°C / +160°C.
Long service life due to heat resistant rubber com
pounds. Safety factor: 6 : 1
Tube: EPDM, black, smooth, resistant to hot air.
Two steel wire braids provides good cross-sectional
strength, kink resistance and high burst pressures. Reinforcement: Steel wire braided.
Cover: EPDM, black, abrasion resistant, weather resist
ant, cloth impression.
Marking: Continuous embossed labelling, coloured:
"SEMPERIT S FHKS Heißluftkompressor/Hot Air
Blower 160°C PN 25 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48401 5180 51,0 2 8,0 67,0 25 2 250 2,40 20
48401 6080 60,0 8,0 76,0 25 2 320 3,10 20
48401 6580 65,0 8,0 81,0 25 2 350 3,40 20
48401 7580 75,0 8,0 91,0 25 2 450 4,00 20
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FHKL
Hot Air Compressor Hose
Application:
A compressor hose for use with silo vehicles as a
connecting hose between the discharge com
pressor and the silo.
Feature:
The steel wire helix allows a higher flexibility and Temperature range: -40°C / +160°C, for a short time
smaller bending radii than with FHKS. up to +190°C.
Notice: Safety factor: 3 : 1
Upon request also available with a white rubber Tube: EPDM, black, smooth, high temperature variant.
tube for granules. Reinforcement: Textile wrapped, double steel wire
ATTENTION: It is vital to observe the different work helix.
ing pressures of the application! Cover: EPDM, black, slightly corrugated, resistant to
heat, ozone and weather, cloth impression.
Marking: Continuous transfer tape, yellow:
"SEMPERIT S FHKL Heissluftkompressor/Hot Air
Blower 160°C".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56407 5150 51,0 2 5,0 61,0 10 2 150 1,50 40
56407 6355 63,0 2 1/2 5,5 74,0 10 2 200 1,80 40
56407 7660 76,0 3 6,0 88,0 8 2 300 2,14 40
56407 9060 90,0 6,0 102,0 7 2 360 2,70 40
56407 1060 102,0 4 6,0 114,0 7 2 450 3,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
GAC
Welding Hose
Application:
A flexible hose for the transport of acetylene.
For welding and cutting, for arc welding under pro
tective gas and related processes.
Also suitable for hydrogen, coal gas and carbon Temperature range: -30°C / +70°C.
dioxide, argon, nitrogen for welding and cutting Safety factor: 3 : 1
(not suitable for LPG, MPS and CNG). Tube: SBR/NR, black, smooth.
Standard/approval: Reinforcement: Textile spiral construction.
ISO 3821:2008 (formerly EN 559:2003). Cover: SBR/NR, red, fluted; smooth (from ID12 mm)
Notice: Marking: Continuous coloured marking, black:
Smooth cover available on request. "SEMPERIT S GAC ISO 3821 (EN559) PN 2 MPa
(20 bar) DN -30°C quarter/year".
Also available in 40 m lengths.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68400 0435 4,0 3,5 11,0 20 2 40 0,11 50
68400 0535 5,0 3/16 3,5 12,0 20 2 40 0,15 50
68400 0630 6,3 3,0 12,3 20 2 40 0,12 50
68400 0635 6,3 1/4 3,5 13,3 20 2 40 0,15 50
68400 0830 8,0 3,0 14,0 20 2 40 0,14 50
68400 0835 8,0 5/16 3,5 15,0 20 2 40 0,18 50
68400 0930 9,0 3,0 15,0 20 2 45 0,16 50
68400 0935 9,0 3,5 16,0 20 2 45 0,19 50
68400 1030 10,0 3,0 16,0 20 2 50 0,17 50
68400 1035 10,0 3/8 3,5 17,0 20 2 50 0,21 50
68400 1250 12,5 1/2 5,0 22,5 20 2 65 0,40 50
68400 1650 16,0 5/8 5,0 26,0 20 2 80 0,47 50
68400 2050 20,0 5,0 30,0 20 2 100 0,58 50
68400 2550 25,0 1 5,0 35,0 20 2 125 0,70 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 11.11.2010
GOX
Welding Hose
Application:
A flexible hose for transporting oxygen.
For welding and cutting, for arc welding using
shielding gas and related processes (Not suitable
for LPG, MPS and CNG). Temperature range: -30°C / +70°C.
Standard/approval: Safety factor: 3 : 1
ISO 3821:2008 (formerly EN 559:2003). Tube: SBR/NR, black, smooth.
Notice: Reinforcement: Textile spiral construction.
Smooth cover available on request. Cover: SBR/NR, blue, fluted; smooth (from ID12 mm).
Also available in 40 m lengths. Marking: Continuous coloured marking, black:
"SEMPERIT S GOX ISO 3821 (EN559) PN 2MPa
(20 bar) DN -30°C quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68402 0435 4,0 3,5 11,0 20 2 40 0,11 50
68402 0535 5,0 3/16 3,5 12,0 20 2 40 0,13 50
68402 0630 6,3 3,0 12,3 20 2 40 0,12 50
68402 0635 6,3 1/4 3,5 13,3 20 2 40 0,15 50
68402 0650 6,3 1/4 5,0 16,3 20 2 40 0,24 50
68402 0830 8,0 3,0 14,0 20 2 40 0,14 50
68402 0835 8,0 5/16 3,5 15,0 20 2 40 0,18 50
68402 0930 9,0 0 3,0 15,0 20 2 45 0,16 50
68402 0935 9,0 3,5 16,0 20 2 45 0,19 50
68402 0955 9,0 5,5 20,0 20 2 45 0,36 50
68402 1030 10,0 3,0 16,0 20 2 50 0,17 50
68402 1035 10,0 3/8 3,5 17,0 20 2 50 0,21 50
68402 1250 12,5 1/2 5,0 22,5 20 2 65 0,40 50
68402 1650 16,0 5/8 5,0 26,0 20 2 80 0,48 50
68402 2055 20,0 5,5 31,0 20 2 100 0,63 50
68402 2550 25,0 1 5,0 35,0 20 2 125 0,70 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 11.11.2010
TWIN
Twin Welding Hose
Application:
Blue hose – a flexible hose for transporting oxygen
for welding and cutting, for arc welding using
shielding gas and related processes.
Red hose – a flexible hose for transporting acet
ylene for welding and cutting, for arc welding using
shielding gas and related processes. Also suitable
for hydrogen, coal gas and carbon dioxide, argon,
nitrogen for welding and cutting (not suitable for Temperature range: -30°C / +70°C.
LPG, MPS and CNG).
Safety factor: 3 : 1
Standard/approval: Tube: SBR/NR, black, smooth.
ISO 3821:2008 (formerly EN 559:2003). Reinforcement: Textile spiral construction.
Cover: NR/EPDM, blue and red, smooth.
Marking: Continuous coloured marking, white:
"SEMPERIT S TWIN ISO 3821 (EN559) PN 2MPa
(20 bar) DN -30°C quarter/year".
Article number Internal-Ø in Wall width in mm External-Ø Work. pressure Number of Bending radius Weight Coil length
mm mm Oxygen Acetylene in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68401 0404 4,0 4,0 3,5 3,5 11 20 2 40 0,23 40/50
68401 0505 5,0 5,0 3,5 3,5 12 20 2 40 0,27 40/50
68401 0608 6,3 8,0 4,4 3,5 15 20 2 40 0,37 40
68401 0606 6,3 6,3 3,5 3,5 13,3 20 2 40 0,31 40/50
68401 0609 6,3 9,0 4,8 3,5 16 20 2 45 0,45 40
68401 0808 8,0 8,0 3,5 3,5 15 20 2 40 0,37 40
68401 0909 9,0 9,0 3,5 3,5 16 20 2 45 0,40 40
68401 1010 10,0 10,0 3,5 3,5 17 20 2 50 0,43 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 11.11.2010
GIB
Welding Hose
Application:
A flexible hose for transporting inert gases, e.g. ni
trogen, argon, carbon dioxide and compressed air.
Standard/approval:
EN 559:2003. Temperature range: -30°C / +70°C.
Safety factor: 3 : 1
Tube: SBR/NR, black, smooth.
Reinforcement: Textile spiral construction.
Cover: SBR/EPDM, black, smooth.
Marking: Continuous coloured marking, white:
"SEMPERIT S GIB EN559 PN 2MPa (20 bar) 6 -30°
C quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68396 0435 4,0 3,5 11,0 20 2 40 0,11 50
68396 0530 5,0 3,0 11,0 20 2 40 0,13 50
68396 0630 6,3 3,0 12,3 20 2 40 0,12 50
68396 0635 6,3 3,5 13,3 20 2 40 0,15 50
68396 0830 8,0 3,0 14,0 20 2 45 0,16 50
68396 0835 8,0 3,5 15,0 20 2 45 0,17 50
68396 1030 10,0 3,0 16,0 20 2 50 0,17 50
68396 1035 10,0 3,5 17,0 20 2 50 0,21 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
GWPB
Welding Hose
Application:
A flexible hose for transporting liquid gas (LPG), for
CNG, methylacetylene and propandiene mixes
(MPS).
For welding and cutting. Temperature range: -30°C / +70°C.
Standard/approval: Safety factor: 3 : 1
ISO 3821:2008 (formerly EN 559:2003). Tube: NBR/SBR, black, smooth.
BS 3212-2:1991. Reinforcement: Textile spiral construction.
Cover: SBR/NR, orange, smooth.
Marking: Continuous coloured marking, black:
"SEMPERIT S GWPB ISO 3821 (EN559) PN 2MPa
(20 bar) DN -30°C quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68404 0435 4,0 3,5 11,0 20 2 40 0,11 50
68404 0535 5,0 3/16 3,5 12,0 20 2 40 0,12 50
68404 0630 6,3 3,0 12,3 20 2 40 0,11 50
68404 0635 6,3 1/4 3,5 13,3 20 2 40 0,14 50
68404 0830 8,0 3,0 14,0 20 2 40 0,13 50
68404 0835 8,0 5/16 3,5 15,0 20 2 40 0,16 50
68404 0930 9,0 3,0 15,0 20 2 45 0,15 50
68404 0935 9,0 3,5 16,0 20 2 45 0,18 50
68404 1030 10,0 3,0 16,0 20 2 50 0,16 50
68404 1035 10,0 3/8 3,5 17,0 20 2 50 0,19 50
68404 1250 12,5 1/2 5,0 22,5 20 2 65 0,37 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 20.08.2010
TWIN OX-PB
Twin Welding Hose
Application:
Blue hose – a flexible hose for transporting oxygen
with air (oxygen content > 20%), for welding and
cutting, for arc welding using shielding gas and
related processes.
Orange hose – a flexible hose for transporting
liquid gas (LPG) for welding and cutting. Also suit
able for CNG and methylacetylene and propan
diene mixes (MPS). Temperature range: -30°C / +70°C.
Standard/approval: Safety factor: 3 : 1
ISO 3821:2008 (formerly EN 559:2003). Tube: Oxygen - SBR/HSBR/EPDM; PB - NBR/HSBR,
black, smooth.
Reinforcement: Textile spiral construction.
Cover: NR/HSBR/EPDM, blue and orange, smooth.
Marking: Continuous coloured marking, white:
"SEMPERIT S TWIN OX-PB ISO 3821 (EN559) PN
2MPa (20 bar) DN -30°C quarter/year".
Article number Internal-Ø in mm Wall width in mm External-Ø Work. pressure Number of Bending radius Weight Coil length
Oxygen PB Oxygen PB in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68403 0606 6,3 6,3 3,5 3,5 13,3 20 2 40 0,31 50
68403 0609 6,3 9,0 4,8 3,5 16,0 20 2 45 0,45 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 11.11.2010
GPBD
Propane Butane Hose
Application:
A flexible hose for transporting liquid gas (LPG) for
DNG, methylacetylene and propandiene mixes
(MPS).
Standard/approval: Temperature range: -30°C / +70°C.
DIN 4815-1:2009. Safety factor: 3 : 1
BS 3212-2:1991. Tube: NBR/SBR, black, smooth.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68060 0435 4,0 3,5 11,0 10 2 45 0,10 50
68060 0635 6,3 1/4 3,5 13,3 10 2 68 0,13 50
68060 0935 9,0 3,5 16,0 10 2 95 0,17 50
68060 1050 10,0 5,0 20,0 10 2 106 0,30 50
68060 0440 4,0 4,0 12,0 30 2 45 0,15 50
68060 0650 6,3 1/4 5,0 16,3 30 2 68 0,23 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 09.11.2009
GMP
Propane Butane Hose
Application:
A flexible hose for transporting acetylene, LPG,
MPS and CNG.
Suitable for cutting and welding, as well as arc
welding under shielding gas. Temperature range: -30°C / +70°C.
For conveying natural gas, hydrogen, carbon diox Safety factor: 3 : 1
ide, argon, nitrogen.
Tube: SBR/NR, black, smooth.
Standard/approval: Reinforcement: Textile spiral construction.
EN 559:2003.
Cover: SBR/NR, orange/red, smooth.
Notice: Marking: Continuous coloured marking, black:
Lengths of 40m and other dimensions available on "SEMPERIT S GMP All fuel gases EN559 PN 2 MPa
request. (20bar) DN -30°C quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68411 1240 12,5 1/2 4,0 20,5 20 2 65 0,30 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
GSS
Nitrogen Hose
Application:
Suitable for pipelines in the chemical industry, for
the cleaning and/or purging of boilers, containers
and agitators with nitrogen N2.
Notice:
Electrically conductive: Resistance R < 106 Ohm Temperature range: -30°C / +60°C.
(according to EN ISO 8031:1997). Safety factor: 4 : 1
Also available with 20 bar working pressure on re Tube: SBR, black, smooth, electrically conductive.
quest. Reinforcement: Textile wrapped, copper wire.
Cover: SBR, black, abrasion resistant, cloth impression,
electrically conductive.
Marking: Continuous transfer tape, yellow:
"SEMPERIT S GSS Stickstoff N2 PN 6 bar Ohm", la
belling tape: "Stickstoff PN 6 bar -30°C / +60°C
Ohm month/year S".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48405 1350 13,0 1/2 5,0 23,0 6 2 80 0,40 40
48405 1960 19,0 3/4 6,0 31,0 6 2 150 0,60 40
48405 2570 25,0 1 7,0 39,0 6 2 185 0,95 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SM1® - STRAHLMEISTER®
Shot Blast Hose
Application:
Premium shot blast hose with unique tube quality, for
conveying highly abrasive media such as quartz
sand, steel shot, corundum, glass, etc.
Feature: Temperature range: -35°C / +80°C.
Extremely long service life due to the high abrasion
resistant quality of the tube. Safety factor: 3.5 : 1
Tube: SBR/NR/BR, black, smooth, electrically conduct
Average wear of the tube 36 mm³ (according to ive, highly abrasion resistant.
DIN ISO 4649:2006).
Reinforcement: Textile wrapped.
Antistatic construction prevents the build-up of static Cover: SBR, black, antistatic, cloth impression.
electricity.
Marking: Continuous transfer tape, yellow:
Standard/approval: "SEMPERIT S SM1® Sandstrahl-Shotblast
Exceeds EN ISO 3861:2008. Strahlmeister® PN 12 bar".
Notice:
A reinforced insert package for increased stability is
available upon request.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48383 1370 13,0 1/2 7,0 27,0 12 2 130 0,50 40
48383 1950 19,0 3/4 5,0 29,0 12 2 190 0,45 40
48383 1970 19,0 3/4 7,0 33,0 12 2 190 0,65 40
48383 2570 25,0 1 7,0 39,0 12 2 250 0,80 40
48383 3280 32,0 1 1/4 8,0 48,0 12 2 320 1,10 40
48383 3212 32,0 1 1/4 12,0 56,0 12 4 320 1,80 40
48383 3890 38,0 1 1/2 9,0 56,0 12 2 380 1,50 40
48383 3811 38,0 1 1/2 11,1 60,2 12 2 380 1,95 40
48383 4290 42,0 9,0 60,0 12 2 420 1,65 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 04.11.2010
SM2®
Shot Blast Hose
Application:
Classic shot blast hose with excellent tube quality
for conveying highly abrasive media such as quartz
sand, steel shot, corundum, glass, etc.
Feature: Temperature range: -35°C / +80°C.
Very long service life due to abrasion resistant tube.
Safety factor: 3.5 : 1
Wear of the tube less than 60 mm3 (according to Tube: NR/SBR/BR, black, smooth, antistatic, abrasion
DIN ISO 4649:2006). resistant.
Antistatic construction prevents the build-up of static Reinforcement: Textile wrapped.
electricity. Cover: SBR, black, antistatic, cloth impression.
Standard/approval: Marking: Continuous transfer tape, red:
Exceeds EN ISO 3861:2008. "SEMPERIT S SM2® Sandstrahl-Shotblast PN 12 bar".
Notice:
A reinforced insert package for increased stability is
available upon request.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48381 1370 13,0 1/2 7,0 27,0 12 2 130 0,50 40
48381 1670 16,0 5/8 7,0 30,0 12 2 160 0,55 40
48381 1970 19,0 3/4 7,0 33,0 12 2 190 0,65 40
48381 2570 25,0 1 7,0 39,0 12 2 250 0,75 40
48381 3280 32,0 1 1/4 8,0 48,0 12 2 320 1,10 40
48381 3212 32,0 1 1/4 12,0 56,0 12 4 350 1,80 40
48381 3890 38,0 1 1/2 9,0 56,0 12 2 380 1,45 40
48381 4290 42,0 9,0 60,0 12 2 420 1,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 04.11.2010
SM3
Shot Blast Hose
Application:
Low cost hose with abrasion resistant tube quality
for conveying highly abrasive media such as quartz
sand, steel shot, corundum, glass, etc.
Feature: Temperature range: -35°C / +80°C.
Long service life due to abrasion resistant tube.
Safety factor: 3.15 : 1
Wear of the tube; less than 90 mm³ (according to Tube: NR/SBR/BR, black, smooth, antistatic, abrasion
DIN ISO 4649:2006). resistant.
Antistatic construction prevents the build-up of static Reinforcement: Textile wrapped.
electricity. Cover: SBR, black, antistatic, cloth impression.
Notice: Marking: Continuous coloured marking, white:
A reinforced insert package for increased stability is "SEMPERIT S SM3 Sandstrahl/Shotblast PN 10 bar".
available upon request.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48450 1370 13,0 1/2 7,0 27,0 10 2 130 0,50 40
48450 1970 19,0 3/4 7,0 33,0 10 2 190 0,65 40
48450 2570 25,0 1 7,0 39,0 10 2 250 0,80 40
48450 3280 32,0 1 1/4 8,0 48,0 10 2 320 1,10 40
48450 3880 38,0 1 1/2 8,0 54,0 10 2 380 1,35 40
48450 4270 42,0 7,0 56,0 10 2 420 1,26 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 10.02.2010
SM40
Grout & Plaster Hose
Application:
For conveying grout, screed, plaster and gypsum in
compact flow process.
Feature:
Very long service life due to abrasion resistant qual Temperature range: -35°C / +80°C.
ity of the rubber tube and cover.
Safety factor: 2.5 : 1
The compact reinforcement package provides a
very stable cross-section making the hose highly kink Tube: SBR/NR/BR, black, smooth, abrasion resistant,
resistant and also offers high pressure resistance. antistatic.
Reinforcement: Textile wrapped.
Antistatic construction prevents the build-up of static
electricity. Cover: SBR, black, antistatic, cloth impression.
Marking: Continuous transfer tape, yellow:
Notice: "SEMPERIT S SM40 Mörtel/Plaster PN 40 bar".
On request:
- with harder rubber quality and higher pressure
resistance
- with steel wire braid
- with fire resistant cover
- with several cover colours.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48386 1960 19,0 3/4 6,0 31,0 40 2 190 0,60 40
48386 2560 25,0 1 6,0 37,0 40 4 220 0,75 40
48386 2570 25,0 1 7,0 39,0 40 4 250 0,80 40
48386 3270 32,0 1 1/4 7,0 46,0 40 4 320 1,10 40
48386 3570 35,0 1 3/8 7,0 49,0 40 4 350 1,15 40
48386 3575 35,0 1 3/8 7,5 50,0 40 4 350 1,20 40
48386 3880 38,0 1 1/2 8,0 54,0 40 4 380 1,40 40
48386 3810 38,0 1 1/2 10,0 58,0 40 4 380 1,90 40
48386 4075 40,0 7,5 55,0 40 4 350 1,35 40
48386 5080 50,0 8,0 66,0 40 4 500 1,70 40
48386 5090 50,0 9,0 68,0 40 4 500 1,95 40
48386 5010 50,0 10,0 70,0 40 4 500 2,20 40
48386 6590 65,0 9,0 83,0 40 4 650 2,55 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 28.06.2010
SM20
Plaster Hose
Application:
Feed hose suitable for thin flow and compact flow
processes.
Suitable for conveying abrasive mediums such as
cement, aggregates, sand, gravel, etc.
Temperature range: -35°C / +80°C.
Feature:
Safety factor: 2.5 : 1
Very long service life due to abrasion resistant qual
ity of the rubber tube and cover. Tube: SBR/NR/BR, black, smooth, antistatic, abrasion
resistant.
The compact reinforcement package provides a Reinforcement: Textile wrapped.
very stable cross-section making the hose highly kink
resistant and also offers greater pressure resistance Cover: SBR, black, antistatic, cloth impression.
. Marking: Continuous transfer tape, yellow:
Antistatic construction prevents the build-up of static "SEMPERIT S SM20 Mörtel/Plaster PN 20 bar".
electricity.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48392 4010 40,0 10,0 60,0 20 4 400 1,85 40
48392 4002 40,0 10,0 60,0 20 4 400 1,85 20
48392 5010 50,0 10,0 70,0 20 4 500 2,15 40
48392 5002 50,0 10,0 70,0 20 4 500 2,15 20
48392 6510 65,0 10,0 85,0 20 4 650 2,90 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SMK
Plaster Hose
Application:
Specially designed hose for dry application (e.g.
cement, grit) and wet application (e.g. plaster, wet
concrete).
Developed for conveying abrasive mediums such Temperature range: -35°C / +80°C.
as cement, sand, aggregates, gravel, etc.
Safety factor: 3.15 : 1
Feature:
Tube: SBR/NR/BR, black, smooth, antistatic, abrasion
Very long service life due partly to the use of abra resistant.
sion resistant rubber in the tube and cover, and
partly to increased thickness of the tube - thicker Reinforcement: Textile wrapped.
wear layer. Cover: SBR, black, antistatic, cloth impression.
Antistatic construction prevents the build-up of static Marking: Continuous coloured marking, white:
electricity. "SEMPERIT S SMK Mörtel/ Plaster PN 10 bar”.
Notice:
Flame resistant cover available on request.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48451 3202 32,0 1 1/4 10,0 52,0 10 2 350 1,20 20
48451 4080 40,0 8,0 56,0 10 2 400 1,40 40
48451 5010 50,0 10,0 70,0 10 2 500 2,10 40
48451 5002 50,0 10,0 70,0 10 2 500 2,10 20
48451 6010 60,0 10,0 80,0 10 2 600 2,55 40
48451 6002 60,0 10,0 80,0 10 2 600 2,55 20
48451 6510 65,0 10,0 85,0 10 2 650 2,65 40
48451 6502 65,0 10,0 85,0 10 2 650 2,65 20
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SMB
Concrete Vibrator Hose
Application:
Connecting hose / feed hose for concrete vibrators
for compacting fresh concrete.
Feature:
Stable reinforcement package for high kink resist Temperature range: -35°C / +80°C.
ance, as well as a high tensile strength.
Antistatic construction prevents the build-up of static Tube: SBR/NR/BR, black, smooth, antistatic, abrasion
electricity. resistant.
Reinforcement: Textile wrapped.
Notice:
On request Cover: SBR, black, antistatic, cloth impression.
- Reinforcement made of steel wire netting also Marking: Continuous coloured marking, white:
available ”SEMPERIT S SMB Betonrüttel/Vibrator”.
- Insulating tube.
Article number Internal-Ø in Wall width External-Ø Number of Bending radius Weight Coil length
mm inches in mm in mm inserts (min.) in mm approx. kg/m (max.) m
48114 2065 20,0 6,5 33,0 4 180 0,65 40
48114 2575 25,0 1 7,5 40,0 4 220 0,9 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SM 200
Concrete Pump Hose
Application:
Specially developed premium hose for
conveying concrete using concrete pumps.
Suitable for conveying highly abrasive media such
as concrete, cement and plaster.
Temperature range: -35°C / +80°C.
Feature: Safety factor: 2 : 1
Long service life due to abrasion resistant tube.
Tube: NR/SBR/BR, black, smooth, antistatic, abrasion
Flexible and easy to handle, with good kink resist resistant.
ance due to a special hose design. Reinforcement: Steel cord wrapped.
Suitable for reverse pumping, for easy cleaning. Cover: SBR, black, antistatic, cloth impression.
Notice: Marking: Continuous labelling:
The hose conforms to EN 12001:2003. "SEMPERIT S PUMPMASTER SM200 CONCRETE
PUMPING/ BETON PUMPEN WP 100 BAR SAFETY
Assemblies on request. FACTOR 2:1 (Month/Year) S DN..".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56398 5010 50,8 2 10,0 70,8 100 2 350 3,00 40
56398 6511 65,0 2 1/2 11,0 87,0 100 4 400 3,15 40
56398 0013 101,6 4 13,0 127,6 100 4 500 7,70 40
56398 1214 125,0 5 14,0 153,0 100 4 620 10,20 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 01.03.2011
SM 150
Concrete Pump Hose
Application:
Specially developed for conveying of concrete
using concrete pumps.
Suitable for conveying highly abrasive media such
as concrete, cement and plaster.
Temperature range: -35°C / +80°C.
Feature: Safety factor: 2 : 1
Long service life due to abrasion resistant tube.
Tube: NR/SBR/BR, black, smooth, antistatic, abrasion
Flexible and easy to handle, with good kink resist resistant.
ance due to a special hose design. Reinforcement: Steel cord wrapped.
Suitable for reverse pumping, for easy cleaning. Cover: SBR, black, antistatic, cloth impression.
Notice: Marking: Continuous labelling:
The hose conforms to EN 12001:2003. "SEMPERIT S PUMPMASTER SM150 CONCRETE
PUMPING/ BETON PUMPEN WP 75 BAR SAFETY
Assemblies on request. FACTOR 2:1 (Month/year) S DN..".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56498 7511 75,0 3 11,0 97,0 75 4 450,0 4,40 40
56498 8012 80,0 12,0 104,0 75 4 480,0 4,65 40
56498 0012 101,6 4 12,0 125,6 75 4 540,0 6,40 40
56498 1214 125,0 5 13,0 151,0 75 4 650,0 8,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 01.03.2011
SM 170
Concrete Pump Hose
Application:
Specially developed hose for
conveying concrete using concrete pumps.
Suitable for conveying highly abrasive media such
as concrete, cement and plaster.
Temperature range: -35°C / +80°C.
Feature: Safety factor: 2 : 1
Long service life due to abrasion resistant tube.
Tube: NR/SBR/BR, black, smooth, antistatic, abrasion
Flexible and easy to handle, with good kink resist resistant.
ance due to a special hose design. Reinforcement: Steel cord wrapped.
Suitable for reverse pumping, for easy cleaning. Cover: SBR, black, antistatic, cloth impression.
Notice: Marking: Continuous labelling:
The hose conforms to EN 12001:2003. "SEMPERIT S PUMPMASTER SM170 CONCRETE
PUMPING/ BETON PUMPEN WP 85 BAR SAFETY
Assemblies on request. FACTOR 2:1 (Month/Year) S DN..".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56598 5010 50,8 2 10,0 70,0 85 2 360 3,00 40
56598 6511 65,0 2 1/2 11,0 87,0 85 2 420 3,15 40
56598 7511 75,0 3 11,0 97,0 85 4 460 4,90 40
56598 8012 80,0 12,0 104,0 85 4 480 5,30 40
56598 0013 101,6 4 12,0 125,6 85 4 520 7,10 40
56598 1214 125,0 5 13,0 151,0 85 4 620 9,10 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 01.03.2011
SOSH
Silo Hose
Application:
Premium silo hose with excellent tube quality, for
filling and discharging silos and silo trucks.
Delivery hose for highly abrasive media such as
cement, sand, gravel, granulated materials, pellets,
etc. Temperature range: -35°C / +80°C.
Feature: Safety factor: 3.15 : 1
Very long service life due to abrasion resistant tube Tube: SBR/NR/BR, black, smooth, highly abrasion res
istant, antistatic.
Especially flexible and therefore easy to handle.
Reinforcement: Textile wrapped, copper wire.
Antistatic hose construction and inter-woven copper Cover: SBR, black, antistatic, cloth impression.
wire to prevent the build-up of static electricity.
Marking: Continuous transfer tape, silver:
Standard/approval: "SEMPERIT S SOSH Hochantiabrasiv Silo D PN 6bar"
Exceeds EN ISO 3861:2008.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48384 7590 75,0 9,0 93,0 6 2 550 2,70 40
48384 7511 75,0 11,0 97,0 6 2 550 3,50 40
56384 9010 90,0 10,0 110,,0 6 2 650 3,70 40
56384 0011 100,0 11,0 122,0 6 2 750 4,55 40
56384 0111 110,0 11,0 132,0 6 4 850 4,70 40
56384 0312 125,0 12,0 149,0 6 4 950 6,25 40
56384 0612 150,0 12,0 174,0 6 4 1200 7,15 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 04.11.2010
SOSP
Silo Hose
Application:
Silo hose with very good tube quality, for filling and
discharging silos and silo trucks.
Delivery hose for highly abrasive media such as ce
ment, sand, gravel, granulated materials, pellets, Temperature range: -35°C / +80°C.
etc.
Safety factor: 3.15 : 1
Feature:
Tube: NR/SBR/BR, black, smooth, antistatic, abrasion
Very long service life due to abrasion resistant tube. resistant.
Especially flexible and therefore easy to handle. Reinforcement: Textile wrapped.
Antistatic construction prevents the build-up of static Cover: SBR, black, antistatic, cloth impression.
electricity.
Marking: Continuous transfer tape, silver:
"SEMPERIT S SOSP antiabrasiv Silo D PN 6 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48385 7590 75,0 9,0 93,0 6 2 550 2,7 40
48385 7511 75,0 11,0 97,0 6 2 550 3,4 40
56385 9010 90,0 10,0 110,0 6 2 650 3,7 40
56385 0011 100,0 11,0 122,0 6 2 750 4,6 40
56385 1309 127,0 5 9,0 145,0 6 4 880 4,8 40
56385 1609 152,0 6 9,0 170,0 6 4 950 5,2 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SILO
Silo Hose
Application:
Economical silo hose with good tube quality, for
filling and discharging silos and silo trucks.
Delivery hose for highly abrasive media such as ce
ment, sand, gravel, granulated materials, pellets, Temperature range: -35°C / +80°C.
etc.
Safety factor: 3.15 : 1
Feature:
Tube: NR/SBR/BR, black, smooth, antistatic.
Long service life due to abrasion resistant tube.
Reinforcement: Textile wrapped.
Especially flexible and therefore easy to handle.
Cover: SBR, black, cloth impression.
Antistatic construction prevents the build-up of static
electricity. Marking: None.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48491 7590 75,0 9,0 93,0 6 2 550 2,90 40
48491 7511 75,0 11,0 97,0 6 2 550 3,60 40
56491 9010 90,0 10,0 110,0 6 2 650 4,00 40
56491 0011 100,0 11,0 122,0 6 4 750 4,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SMSP
Silo Hose
Application:
Silo hose with very good tube quality for filling and
discharging silos and silo trucks.
Suction and delivery hose for highly abrasive media
such as cement, sand, gravel, granulated materials,
pellets, etc. Temperature range: -35°C / +80°C.
Feature: Safety factor: 3.15 : 1
The built-in wire helix, improves cross-sectional Tube: NR/SBR/BR, black, smooth, antistatic, abrasion
stability, allows smaller bending radii and makes the resistant.
hose suitable for suction purposes. Reinforcement: Textile wrapped, helix, copper wire.
Very long service life due to abrasion resistant tube. Cover: SBR, black, antistatic, cloth impression.
Especially flexible and therefore easy to handle.
Marking: Continuous transfer tape, silver:
Antistatic hose construction and inter-woven copper "SEMPERIT S SMSP antiabrasiv Silo SD PN 6 bar".
wire prevents the build-up of static electricity.
Notice:
Various hose ends available on request.
Date: 31.08.2007
SFT
Silo Hose
Application:
Universal lightweight lay-flat delivery hose with
highly abrasion resistant tube.
For conveying highly abrasive bulk materials, such
as cement, sand and gravel, dry or wet. Temperature range: -20°C / +70°C.
For conveying granulated materials. Safety factor: 3.15 : 1
Notice: Tube: SBR, black, smooth, antistatic, abrasion resistant.
ATTENTION: It is vital to be aware of the different Reinforcement: Textile wrapped.
working pressures.
Cover: SBR, black, antistatic, cloth impression.
Marking: Continuous coloured marking, white:
"SEMPERIT S SFT Semperflex Transport"; ID>75: la
belling.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
48232 7540 75,0 4,0 83,0 8 2 1,10 40
56232 9040 90,0 4,0 98,0 6 2 1,35 40
56232 0040 100,0 4,0 108,0 6 2 1,45 40
56232 1060 101,6 4 6,0 113,6 6 2 2,30 40
56232 0145 110,0 4,5 119,0 6 2 2,00 40
56232 0345 125,0 4,5 134,0 5 2 2,45 40
56232 1550 254,0 10 5,0 264,0 3 2 4,50 20
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SBD
Dredging Hose
Application:
Heavy duty dredging discharge hose providing the
necessary flexible connection between rigid pipe
work and floating pipeline discharge systems.
Notice:
Temperature range: -20°C / +70°C.
All dredging discharge hoses are manufactured ac
cording to customers’ requirements. Nominal dia Tube: SBR/NR, black, smooth, abrasion resistant.
meters up to 610 mm available.
Reinforcement: Textile wrapped.
Various hose ends available on request.
Cover: CR, black, resistant to abrasion, oil traces,
ozone, sea water and weather, cloth impression.
Marking: None.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56670 xxxx
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SBS
Dredging Hose
Application:
Specially designed for use as a flexible connection
between dredging pump and boom. The steel rings
provide excellent flexibility and vacuum resistance.
Notice:
All dredging hoses are manufactured according to Temperature range: -20°C / +70°C.
customers requirements. Nominal diameters up to
610 mm available. Tube: SBR/NR, black, smooth, abrasion resistant.
Various hose ends available on request. Reinforcement: Steel rings textile, wrapped.
Cover: CR, black, corrugated, resistant to abrasion, oil
traces, ozone, sea water and weather, cloth impres
sion.
Marking: None.
Date: 31.08.2007
SBSD
Dredging Hose
Application:
A suction and delivery hose specially designed for
use on outboard systems on dredgers.
Particularly suitable for pipelines and for sand and
gravel applications. Temperature range: -20°C / +70°C.
Notice:
Tube: SBR/NR, black, smooth, abrasion resistant.
All dredging hoses are manufactured according to
customers requirements. Nominal diameters up to Reinforcement: Textile wrapped, double steel wire
610 mm available. helix.
Various hose ends available on request. Cover: CR, black, resistant to abrasion, oil traces,
ozone, sea water and weather, cloth impression.
Marking: None.
Date: 31.08.2007
SES55 - SES40
Waste Suction Hose
Application:
SES55:
• A highly flexible suction hose for conveying abrasive
media, e.g. refuse, grit. Especially for media which is
subject to the build-up of static electricity.
SES40: Temperature range: -35°C / +80°C.
Safety factor: 3.15 : 1
• A highly flexible suction hose suitable for abrasive
and liquid media, with tan non-conductive tube. Tube: - SES 55: SBR/NR/BR, black, smooth, antistatic,
abrasion resistant.- SES 40: NR, tan, smooth, insulating,
Feature: abrasion resistant.
Due to the low weight and high flexibility, this hose Reinforcement: Textile wrapped, steel wire helix.
is suitable for use at the front end of suction lines
that have to be moved by hand. Cover: SBR, black, corrugated, antistatic, cloth impres
sion.
Marking: None.
Date: 31.08.2007
SKM
Road Sweeper Hose
Application:
A road sweeper hose with excellent flexibility.
Feature:
Long hose life due to the abrasion resistant NR
tube.
Temperature range: -35°C / +70°C.
Available in fixed lengths with helix-free sleeves.
Notice: Tube: NR, light brown, corrugated.
Also available with extended sleeves. Reinforcement: Textile wrapped, steel wire helix.
Cover: SBR, black, corrugated, resistant to abrasion, oil
traces, ozone and weather, cloth impression.
Marking: None.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56677 0600 152,0 6 - - - 3 150 3,90 15,5
56677 0800 203,0 8 - - - 3 200 5,36 15,5
56677 1000 254,0 10 - - - 3 250 6,90 15,5
56677 1200 305,0 12 - - - 3 300 8,55 15,5
56677 1400 354,0 14 - - - 3 350 8,70 15,5
56677 1600 403,0 16 - - - 3 400 10,38 12,5
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
SMG
Rubber tube
Application:
Rubber tube suitable for various applications, e.g.
as transport protection.
Feature:
Rubber tube, no inserts
Notice:
Available in various sizes (DN 10 - 609mm), wall
thicknesses and quality. Also available in FDA food
quality.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56040 xxxx
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
C
O
NC
R
E
TE
P
UM
PI
NGH
O
S
ES
S
E
MP
E
RI
T–S
U
CC
ES
S
FU
L
AL
LO
VE
R
TH
EW
O
RL
D
T
heA
us
tr
i
anba
se
dSem
peri
t
G r
o
upi
soneof
t
hewor
ld'
sG ai
ne
dfr
o
m ou
rcompa
ny'
sl
ongt
radi
t
io
n,ou
rex
per
t
i
se
l
ead
i
ngc
ompa
ni
esa
ct
i
veind
ev
el
opi
ng
,manu
fa
ct
ur
ing i
nt
hepr
od
uct
i
onandus
eofr
ubb
erandpl
as
ti
cpr
o
duc
ts
,
a
ndmar
k
et
i
nghi
ghq
ual
i
tyr
ub
be
randpl
as
ti
cpr
odu
ct
s.toge
t
herw
it
hourco
m mi
t
mentt
om ai
nt
ai
nhi
ghqua
l
it
y
F
oun
d
edi
n1824
,t
hec
ompan
yi
son
eofE
uro
pe'
sol
des
t s
t
anda
rd
s i
neve
ryare
a,as wel
las o
urded
i
cat
i
on
r
ubb
e
rman
uf
ac
tu
r
er
s. t
ocu
st
ome
rse
rvi
ce
,st
andf
oracon
ti
nue
d s
tr
en
gt
he
ni
ng
o
fou
rpo
si
t
io
nasagl
oba
ll
ead
er.
OurS
em p
ermed
,Semp
er
f
le
x,Semp
ert
r
ans
andSe
m- i
nAus
t
ri
a,t
heC
ze
chRep
ubl
i
c an
d I
t
al
y,ba
se
d o
n k
now-
p
erf
or
m d
iv
is
io
nsof
fe
rou
rc
ust
ome
rsaco
mpr
eh
ens
i
ve l
edg
egai
ne
d b
yma
nyye
ar
sofexp
er
ie
nce
.Si
gn
if
i
cant
on-
a
ndin
novat
i
veas
sor
t
men
to
fh
ig
h q
ual
i
typ
ro
du
ct
san
dso
- g
oin
gi
nves
t
men
t
si
nR&Dpr
ov
ideu
swit
hco
nt
in
ua
ll
yi
mpr
ov-
l
ut
i
ons
,fr
om med
i
cala
ndi
nd
us
tr
ia
lgl
ove
s,
to
hydr
au
l
ic
,ingq
ual
i
tya
ndp
r
odu
cts
hi
ghl
yadap
t
edfo
rt
oda
y'
smar
ket
s
.
i
ndu
st
r
ialhos
esandr
ub
be
r s
hee
ti
ng
s,i
ndu
s
t
ri
almo
ul
-
d
ing
s,
as we
ll
asc
onve
yo
rb
el
t
s. B
usi
ne
ss
esand
i
ndu
st
ri
esof
all
si
zesha
veawi
de r
an
ge
o
fho
ser
equ
ir
em
ent
s
.W h
et
heri
t
’si
nt
hech
emi
cal
in
dus
tr
y,
S
empe
rf
lexi
ndu
st
r
ia
lho
sed
i
vi
si
onde
ve
lop
s,
man
uf
ac
tu
r
esthebu
il
di
ngin
d
us
tr
y,t
hefo
od i
ndu
st
ryori
nre
cyc
li
ng,
a
nd m
arke
tsi
ndu
st
r
ia
lho
se
st
hr
ough
ou
tth
ewo
rl
d.T
he
se S
emper
f
le
x,y
ou
rpa
rt
ne
rf
orhos
esol
ut
i
ons
,of
f
er
sthe
ri
ght
h
ighq
ual
it
ypr
odu
ct
sar
ep
ro
du
cedi
nou
rSe
mpe
rf
l
exp
la
nt
sprod
uct
fo
ry
ouf
or
al
m o
st
eve
ryi
magi
nabl
eap
pl
ic
ati
on
.
A
l
l
busi
ne
ss
t
ra
ns
act
i
ons
ar
ee
xc
lu
s
ive
l
ygo
ve
rn
d
byo
ur
ge
ne
ra
l
te
rms
o
fbus
i
ne
ss
. T
hi
sca
t
al
ogue
i
sth
e p
rope
r
tyofS
em
p
er
i
t T
e
ch
ni
s
che
Pr
od
uk
t
e G
m
b
Ha
n
d
S
u
bj
ect
tom
i
sp
ri
nt
san
de
rr
or
s
. r
e
pre
se
n
tst
hem
o
st
cur
r
ent
ver
s
io
n.
P
e
rmi
ss
i
ont
o r
e
pri
nto
rc
opyt
hi
sca
ta
l
ogu
e(
i
n w
ho
l
e o
ri
npa
rt
)mu
stb
e
o
b
tai
ne
din
wr
i
ti
ngf
r
omS
empe
r
it
Te
chn
i
sc
heP
r
od
uk
t
eGmb
H. T
heh
os
e
ssho
wn
in
th
is
li
t
er
atu
r
ear
esc
he
m
at
i
cdi
ag
ra
mso
n
l
y.
s
t
P
r
in
tda
t
e:
Augu
s
t
2006,
1 ed
i
ti
on
2
C
O
NC
R
E
TE
P
UM
PI
NGP
R
OC
ES
S
E
S
Co
nc
re
t
e p
um
pi
ngi
sno
wst
an
dar
dpr
ac
t
ic
eint
hebu
i
l
di
ng h
i
ghqu
al
i
t
y pu
mpi
ngs
ta
te
-o
f-
t
he-
ar
teq
u
i
pme
nti
sne
ede
d.
i
n
dus
t
ry
.A c
on
cr
et
epum
ppl
ace
s c
on
cr
et
eco
nsi
de
ra
bl
y S
E
M P
ER
IT
of
fer
sh
i
ghqu
al
i
tyc
oncr
et
epu
m
pi
ngh
os
esan
das
-
f
as
t
er
,wi
t
hle
s
sla
bou
rt
ha
nanyot
he
rme
t
hod.
A mod
e
rn s
e
mbl
i
esf
ors
uch
app
l
ic
at
io
ns.T
hes
eho
s
esa
ndas
se
mbl
i
es
c
onc
r
et
epum
p,i
nth
e h
an
dsofapr
o
fe
ss
io
na
lcon
cr
et
e w
er
ede
ve
lo
pedt
osa
ti
s
fyt
hes
pec
if
ic
de
ma
nd
soft
hea
ppl
i
-
p
ump
in
gope
r
at
io
n,i
sv
er
yr
el
ia
bl
e.Whe
nuse
dpro
pe
r
ly
,ca
ti
on
,wi
thf
ocu
sonsaf
et
y
. Wit
hSE
MP
ER
ITas
se
mbl
ed
a
p
umpi
ss
af
e
ran
d mo
re
ef
f
ect
i
vet
han
ot
he
rmet
ho
ds
.F
orho
se
syou
wil
l
ach
i
eve
th
ehi
ghes
ts
ta
nda
r
d
si
nyo
ura
ct
iv
i
t
ie
s.
M
A
I
NCR
I
TE
RI
AFO
RHI
GHQ
UA
L
I
TY
C
O
NCR
E
T
EPU
M P
I
NGHOS
E
S
:
D
U
R
AB
I
L
IT
Y A
S
S
EM
B
LY
S
AF
E
TY
–abr
as
i
onr
es
i
st
ant
li
ni
ng –s
ecu
rel
yfa
c
tor
yf
i
tt
edc
o
up
l
i
ngs
–abr
as
i
onr
es
i
st
ant
cov
er –h
ighbu
rs
tp
res
su
r
e
W
EI
GHT F
L
E
XI
BI
LI
TY
–l
i
ghtwe
i
gh
t –h
ighf
l
exi
bi
l
it
y
K
E
YC
HAR
A
CT
E
RI
ST
IC
SO
F
S
EM
PE
R
IT
CO
NCR
E
T
E
P
U
MP
I
NGH
OS
ES
ANDH
O
S
EAS
S
E
MBL
I
ES
1
.S
up
e
r
i
or
li
ni
nga
b
r
as
i
onr
e
si
s
ta
nc
e
– v
e
r
yl
ong
s
e- 7
r .S
af
e
tyf
ac
t
or
–2
:1
,
bu
r
st
pre
s
s
ur
eo
f1
50
a
nd
2
00
ba
r
–
v
i
cel
i
fe v
e
r
yh
ig
hs
a
fe
t
yf
or
op
er
at
or
s
2
.L
i
gh
tw
ei
gh
th
os
e– m
i
ni
malo
pe
r
at
orf
at
i
gue
a
nd
lo
w8.F
ac
t
or
yf
i
t
te
da
s
s
em
bl
i
es–h
i
ghs
a
fe
t
yt
hr
ou
gh
f
ac
to
r
y
t
r
ans
p
or
t
cos
t
s f
i
t
te
da
s
s
em
bl
i
es
3
.Go
odfl
ex
ib
i
li
ty–e
as
yt
o h
an
dl
e 9
.F
i
tt
i
ngs– u
s
ag
eofhi
gh
-g
ra
de s
t
ee
lqua
li
t
y f
orl
ong
e
r
4
.F
ul
l
conf
orm
it
yw i
t
hEN1200
1:2003 s
er
v
ic
el
i
fe
5
.E
xc
el
len
tcr
os
s se
ct
io
n s
ta
bi
l
it
y – s
t
abl
eas
sem
bl
i
ng 1
0
.A
ss
embl
ies
de
l
i
ver
edwit
hpr
ote
c
ti
vepl
as
ti
ccapso
n
p
r
oce
ss f
i
t
ti
ngs
–dam
ag
eo
ft
hea
ss
embl
ydu
r
i
ngtr
a
ns
por
tav
oi
ded
6
.H
ose–su
i
ta
bl
efor
Vi
ct
au
li
cco
up
li
ngsaswel
las
ot
her1
1
.E
as
ytocl
ea
nb
yre
vers
epumpi
ng–a
voi
di
ngbl
ock
a
-
c
o
up
l
i
ngs
y
st
ems g
e
s
an
di
nc
re
a
si
ngs
e
rv
i
cel
i
fe
C
1
2
.u
tp
i
ec
es
a
va
il
abl
eon
r
e
qu
es
t
3
A
P
P
L
IC
AT
I
ONS
C
O N
CRE
TEPL
ACEME
NT
Co
nc
re
t
e su
ppl
y a
tcon
s
tr
u
ct
io
ns
it
es– d
el
i
ver
y
b
y c
on
cr
e
tepu
mpi
ngma
ch
i
ne
s.Mo
s
tc
ommo
nl
eng
th
s
u
se
d:3t
o 4 me
te
r
s.
Mos
tco
mmo
ndi
ame
te
r
sus
ed
f
or
th
i
sa
ppl
i
cat
i
on:
4"
,5
".
C
ONCR
ETEP
I
LI
NG
S
e
mpe
ri
tco
nc
r
etepum
pin
g ho
s
e
sar
e us
e
d al
s
o f
or
s
p
ec
i
alpi
l
in
gappl
i
cat
i
onsatc
o
ns
t
ru
ct
i
onsi
t
es
. Mo
st
c
o
mmo
n l
eng
t
hsus
ed:10t
o 2
0(3
0)me
te
rs
. Mo
st
c
o
mmo
ndi
ame
t
ers
use
dfo
rt
hi
sap
p
l
ic
at
i
on:
4"
,5"
.
T
UNEL
LI
NG
A
ut
omat
i
c m
ac
hi
nesp
r
ayin
g – p
ri
mar
y t
un
ne
lwa
ll
s
s
t
abi
l
is
at
i
on.
Fo
rt
hi
sap
pl
i
cat
i
on mo
st
l
ysm
al
le
rdi
ame
t
er
s
o
f
the
hos
esa
r
eus
ed.
Di
mens
i
on:2"
t
o4"(
5"
)
T
R
AN
SP
O
RT
E
DMA
T
E
RI
AL
S
S
e
mpe
ri
t
con
c
re
te
pu
m
pi
ngh
os
e
sa
re
s
ui
t
abl
ef
or
del
iv
er
y
o
f
hi
gh
lya
br
as
i
vem
e
di
a,s
u
ch
as
co
n
cr
et
e,mo
rt
ara
nd
c
e
men
t
.
4
S
E
MP
E
RI
THO
S
E
TY
P
ES
P
U
MP
MA
S
TE
R
SM
20
0
T
e
mp
er
at
ure
ra
ng
e:
--
35°
C
/+
80
°
C. T
u
be:NR/S
BR
/ B
R
,bl
ack
,sm
oot
h,a
nt
i
st
at
i
c,a
br
as
i
on
S
a
f
et
yf
act
or
:2
:1 r
e
si
st
ant
.
H
o
se
fu
ll
yco
nf
or
ms
toEN
12
00
1
:
20
03 R
ei
nf
or
ceme
n
t:
Ste
e
lw
ir
e,wr
ap
ped.
C
ove
r:
SBR,
bl
ack
,
an
t
is
tat
i
c,c
l
ot
hi
mpr
es
si
on
.
A
r
t
i
cl
enu
m
be
r I
n
ner
di
a
met
e
r W
a
l
lt
hi
c
kne
s
sO
ut
e
rdi
a
met
e
rWo
r
k
.p
re
s
su
r
e N
umb
e
rfB
o e
n
d
in
gr
a
di
usWe
i
gh
t Co
i
l
le
ng
t
h
m I
m n
ch m m m mb a
r(
ma
x)r
ei
n
fo
rc
e
me
n
tsm
m(
mi
n)ap
p
r
ox
.
kg/
mm(
max
.
)
4
8
3
98
50
1
050
.
8 2 1
0
.
0 7
0
.
8 1
0
0 4 3
5
0 2
.
9
0 4
0
4
8
3
98
65
1
165
.
021
/
211
.
0 8
7
.
0 1
0
0 4 4
0
0 3
.
9
0 4
0
5
6
3
98
75
1
275
.
0 3 1
2
.
0 9
9
.
0 1
0
0 2 4
5
0 5
.
5
0 4
0
5
6
3
98
85
1
285
.
031
/
212
.
0 1
0
9
.0 1
0
0 4 5
0
0 6
.
6
0 4
0
5
6
3
98
00
1
310
1
.
6 4 1
3
.
0 1
2
7
.6 1
0
0 4 6
0
0 8
.
3
0 4
0
5
6
3
98
11
1
311
4
.
041
/
213
.
0 1
4
0
.0 1
0
0 4 7
0
0 9
.
2
0 4
0
5
6
3
98
12
1
412
5
.
0 5 1
4
.
0 1
5
3
.0 1
0
0 4 8
0
0 1
2
.
20 4
0
5
6
3
98
15
1
615
0
.
0 6 1
6
.
0 1
8
2
.0 1
0
0 6 1
0
0
015
.
80 4
0
Cu
tp
iec
es
,aswe
ll
asdi
ff
er
en
tl
engt
hass
e
mbl
ie
sa
va
il
abl
eon
r
eq
ue
s
t
.Fo
rmi
ni
mum
or
der
in
gq
ua
nt
i
ti
esa
n
dp
r
i
ce
sp
l
eas
ec
on
t
ac
ty
ou
r
ne
ar
e
st
S
emp
eri
t
sub
si
di
ar
y,
dis
t
ri
bu
to
ro
rte
chni
ca
ls
er
vi
ce
.
P
rev
a
le
ntd
ime
ns
io
nsar
ea
vai
l
abl
eonst
oc
k.
I
den
t
i
fi
ca
ti
on
:e
mbos
sed
,r
edmyl
art
ape
"
SEM
PER
ITS
PUMPMAS
TERS
M200 Co
ncr
e
teP
ump
i
ng
/Bet
onp
u
mp
en
W.
P.
10
0bar
,S
af
et
yFa
c
to
r
2:
1"
P
U
MP
MA
S
TE
R
SM
15
0
T
e
mp
er
at
ure
ra
ng
e:
3
-5°
C
/+
80
°
C. T
u
be:NR/S
BR
/ B
R
,bl
ack
,sm
oot
h,a
nt
i
st
at
i
c,a
br
as
i
on
S
a
f
et
yf
act
or
:2
:1 r
e
si
st
ant
.
H
o
se
fu
ll
yco
nf
or
ms
toEN
12
00
1
:
20
03 R
ei
nf
or
ceme
n
t:
Ste
e
lw
ir
e,wr
ap
ped.
C
ove
r:
SBR,
bl
ack
,
an
t
is
tat
i
c,c
l
ot
hi
mpr
es
si
on
.
A
r
t
i
cl
enu
m
be
r I
n
ner
di
a
met
e
r W
a
l
lt
hi
c
kne
s
sO
ut
e
rdi
a
met
e
rWo
r
k
.p
re
s
su
r
e N
umb
e
rfB
o e
n
d
in
gr
a
di
usWe
i
gh
t Co
i
l
le
ng
t
h
m I
m n
ch m m m mb a
r(
ma
x)r
ei
n
fo
rc
e
me
n
tsm
m(
mi
n)ap
p
r
ox
.
kg/
mm(
max
.
)
5
6
4
98
00
1
2 1
0
1
.6 4 1
2
.
012
5
.
675 4 6
0
06.
5
0 4
0
5
6
4
98
12
1
4 1
2
5
.0 5 1
4
.
015
3
.
075 4 8
0
010
.
504
0
5
6
4
98
13
1
4 1
2
7
,0 5 1
4
,
015
5
,
075 4 8
0
010
.
804
0
Cu
tp
iec
es
,aswe
ll
asdi
ff
er
en
tl
eng
thas
s
embl
i
esa
va
il
abl
eon
r
eq
ue
s
t
.Fo
rmi
ni
mum
or
der
i
ngqu
an
t
i
ti
esa
n
dp
r
i
ce
sp
l
eas
ec
on
t
ac
ty
ou
r
ne
ar
e
st
S
emp
eri
t
sub
si
di
ar
y,
dis
t
ri
bu
to
ror
t
echn
ic
al
ser
v
ic
e.
P
rev
a
le
ntd
ime
ns
io
nsar
ea
vai
l
abl
eons
toc
k
.
I
den
t
i
fi
ca
ti
on
:e
mbos
sed
,whi
t
emyl
art
ape
"
SEM
PER
ITS
PUMPMAS
TERS
M150Conc
r
ete
Pu
m p
i
ng
/Bet
onp
u
mp
en
W.
P.
75b
ar
,Sa
f
et
yFa
ct
or
2:
1"
I
MPOR
TANTNOT
ES: D
ange
r!Be
fo
reu
si
ngwi
t
hnewor
unt
es
t
edmed
iao
rf
orap
pl
i
cat
i
onst
ha
tar
e
T
hi
scat
al
ogu
eha
s b
eenc
ar
ef
ul
lypr
ep
ar
ed t
opr
ov
id
eourc
us
to
mer
swi
t
h n
oti
nc
lud
edi
nth
epr
odu
cti
nf
or
mat
i
on,wr
i
t
te
nin
fo
rm
at
ionm
us
tbeob
ta
in
ed
c
ompr
eh
ens
iv
ead
vi
ce.T
h
einf
or
mat
i
onc
ont
ai
nedhe
r
ei
ni
st
her
esu
l
tof
mayf
n r
oma s
pec
ia
li
s
tde
al
ero
raSe
mper
i
tap
pl
ic
at
io
nse
ng
in
eer
.A
ll
hos
esmu
st
be
y
ear
sof
te
st
san
dtr
ia
lso
rba
se
d o
nth
eendu
ra
nces
pe
ci
f
ic
at
io
nsd
ef
in
edyr
b eg
ul
arl
ych
eck
edf
or
ope
rat
i
ngs
afe
t
y.I
nt
heev
en
to
fd
amage
,i
npar
t
ic
ul
art
o
I
SO 7
620-
198
6(
E)fort
hesp
eci
f
ie
d medi
a.Th
ein
di
vi
du
alope
r
at
in
g t
heh
osec
ove
r,
ho
ses
mus
tb
ere
pl
ace
dfo
rsa
fe
ty
re
as
on
s.
c
ond
it
i
onsa
ff
ec
tt
heu
seo
fe
ver
ypr
odu
ct
.Pr
odu
ct
sca
nt
he
re
fo
reo
nl
yof
f
er
th
e P
ubl
i
cat
io
ndat
e/
Sta
t
e o
fc
at
alo
guei
nf
or
mat
io
n:
08/
2006,
1st
edi
t
io
n.We
s
af
et
yth
ati
sex
pe
ct
edont
heba
si
soft
hei
nf
or
mat
io
npr
ov
ide
dbyu
si
nth
e c
ont
i
nuou
sl
ywor
kat
adv
anc
in
g o
urp
rod
uc
tsf
or
our
cu
st
ome
rs
.Pl
ea
seke
ep
wr
i
tt
enpr
odu
cti
nf
or
mat
i
on.I
n t
heev
ento
f i
mpr
o
pert
r
eat
men
tsu
chsy
a our
se
lfi
nf
or
medr
eg
ul
ar
ly
abou
tt
hemos
tr
ec
en
tpr
od
uct
spe
c
if
ic
at
io
nse
it
he
r
c
ru
sh
ing
,t
ear
in
g,
st
re
tc
hi
ngan
dl
oadi
ngwi
t
h i
mpe
rm
is
s
ib
leme
di
at
hi
ss
afya
e
t twww.s
emp
er
fl
ex
.c
omor
geti
nt
ou
chwi
th
ours
pe
ci
al
i
std
ea
le
rso
rSe
mper
i
t
c
ann
otb
eexp
ec
te
d. a
ppl
i
cat
io
nsen
gi
nee
r
s.
Wer
ese
rv
et
her
ig
htt
oma
keam
end
m e
nt
sat
any
ti
me. Wer
es
erv
eth
er
igh
tt
oma
keame
ndme
nt
sat
any
ti
me
5
F
I
T
TI
NGS
S
e
mpe
ri
tc
onc
re
tep
umpi
ngh
ose
s
ar
e as
se
mbl
edwi
t
h
h
i
ghq
ual
i
tyVI
CTA
UL
IC s
y
st
emc
ou
pli
ng
sbytr
ai
ne
d
o
p
era
t
or
su
si
ngs
ta
te
-
of
-t
he
-a
r
ta
sse
m
bl
i
ngequ
i
pme
nt.
A
s
s
em
bl
ycr
o
ss
-s
e
ct
i
on.
A
s
s
em
bl
ydi
me
ns
i
on
s D
i
me
ns
i
o
ns
H
o
s
e F
i
t
t
in
g ÆAÆB ÆCL1
mmm mm
m m
m
2
" 2
1
/2
" 7
3
.
0 6
9
.
0 5
0
.
0 1
6
.
0
2
1
/2
" 3
" 8
8
.
9 8
4
.
9 6
5
.
0 1
6
.
0
3
" 3
" 8
8
.
9 8
4
.
9 7
5
.
0 1
6
.
0
4
" 4
" 1
1
4
.31
0
8
.01
0
1
.61
7
.
0
4
" 4
1
/2
" 1
2
7
.01
1
5
.01
0
1
.61
7
.
0
5
" 5
" 1
4
2
.01
3
3
.01
2
5
.01
7
.
0
5
" 5
1
/2
" 1
4
8
.01
3
9
.01
2
5
.01
7
.
0
A
S
S
EM
B
LI
NGP
R
OC
ES
S
S
E
R
VI
CE,
MAI
NTE
N
AN
CE
A
N
DST
ORAG
E
Hos
es
ares
ubj
ect
t
o al
i
mit
eds
er
vi
cel
if
ean
dth
euse
rmus
t Cou
pli
ng
sorot
her
fi
t
ti
ngsmu
stbec
ar
efu
ll
yin
spe
ct
edfo
r
b
e a
le
rt
towar
ni
ngso
fapend
in
g h
os
efai
l
ur
e,
espec
ia
ll
y s
i
gnst
hatt
he
yareb
ecomi
ngdet
ach
edf
romth
ehos
eand
wh
ent
hecon
dit
i
onsu
nder
w h
i
chth
ehos
ei
sus
edrequ
ir
e mu
stber
ep
lac
edi
mm e
di
ate
lyi
fne
ces
s
ary
.
ahi
ghwor
k
ingpr
ess
ur
eand/
ort
hehos
ei
sus
ed t
ocon
-
v
eyda
nger
ou
ssub
st
anc
es. S
tor
age
S
tor
edr
ubber
hos
esc
anbein
fl
uen
cedb
yte
m pe
ra
tu
re,
ai
r
S
afe
tyw a
rni
ng:Ift
he manu
fac
t
ure
r'
s r
ecommen
- h
umid
it
y,o
zone
,dayl
i
ght
,oils
ol
ve
nt
s,co
rr
osi
vel
iq
ui
ds
d
ati
on
s r
ega
rdi
ng s
er
vic
e,mai
nt
ena
ncean
d s
tor
age a
ndvapo
r,
ins
ec
ts
,r
odent
san
d r
ad
ioa
ct
iv
em a
te
ri
al
set
c.
o
fth
ehose
inques
ti
onar
enotf
ol
l
owed,
th
ismayl
ead
t
oth
ehose
'sf
ai
lu
ret
o f
unc
ti
onco
rr
ect
l
y,wh
ic
h i
ntu
rn P
rop
ers
tor
ageo
ft
hehos
esdep
ends
pri
mar
il
yont
he
ir
si
ze
mayl
eadtodamageofpr
oper
tyors
er
io
us bo
dil
y (
di
amet
erandl
eng
th
),t
hequan
ti
t
ytobest
or
edandt
he
i
nj
ur
y. p
ackag
in
g mat
er
ia
lsus
ed.Hose
smus
tnotbest
ack
ed
o
rpi
ledu
p i
nsu
chawaysoth
att
hes
ta
ckweig
htc
aus
es
Gen
er
ali
ns
pect
io
n t
hehos
esont
hebo
tt
omtobec
omedef
or
med.Asr
ubbe
r
I
ns
pec
ti
on
sand h
ydr
ost
at
i
c t
es
tsar
et
o bec
arr
ie
d ou
t h
osesdi
f
ferwi
del
y i
ndime
nsi
on,we
igh
t an
d l
eng
th
,
a
tre
gul
ari
nt
er
val
si
norde
rt
om o
ni
to
rhos
esu
it
abi
l
it
yf
orno g
ener
alr
ec
ommendat
i
onscanb
egiv
enint
hi
sse
nse
.
c
ont
i
nue
d u
se.Avi
su
alin
spe
ct
io
noft
hehos
efo
rloo
se At
hi
n-wa
ll
edhos
ecanwit
hs
ta
ndle
sss
tr
ai
n t
hanat
hi
ck
-
c
ove
rs
,ki
nk
s,d
ent
sors
of
ts
pot
smus
tbec
ar
ri
edou
tf
ort
he wal
l
edhos
eoraho
sere
in
for
cedwi
t
ha s
t
eelwi
red
oubl
e
p
urp
ose
s o
fdet
ermi
ni
ngwhet
he
r r
ei
nf
or
ce
-m
ent
s h
ave h
el
ix
. Hos
est
hatar
e de
li
ve
redcoi
l
edm u
stbest
or
ed
e
it
he
rbr
oke
nors
hi
ft
edou
tof
pos
it
i
on. h
ori
zon
ta
ll
y
.
6
Whene
verpo
ss
ibl
e,h
ose
s s
hou
ldbes
tor
edi
nthe
ir
ori
g- H
i u
m i
di
ty
n
alpac
kagi
ng,e
spe
ci
all
yi
ft
hesec
ont
ai
ner
sar
e wo
oden S
tor
agei
n hu
mids
to
rager
oomss
houl
dbeav
oi
ded.I
ti
s
c
rat
esorpl
as
ti
cpr
ote
ct
ionf
oi
ls
.Thi
ski
ndofpac
kagi
ng i
mpor
ta
ntt
o mak
esu
reth
atco
nden
sat
i
ondoe
snotf
or
m.
a
ls
opro
tec
tst
heh
osef
r
om s
unl
ig
ht
. B
est
isar
el
ati
vea
ir
humi
di
tyn
ote
xce
edi
ng65%.
T
hefol
l
owingco
nt
ain
s ge
ner
ali
nst
r
uct
i
onsf
or p
ro
perl
y
s
t
ori
nghos
esi
naccor
da
ncewit
ht
hest
and
ard
slai
ddown L
ig
hti
ng
i
nDIN7716:1982"
Rubber
prod
uct
s;
requ
i
re-
ment
sf
orRubber
produ
ct
ss
houl
dbepr
ot
ect
edf
roml
i
ght
,es
pec
ial
l
y
s
t
orag
e,cl
eani
ngandmain
ten
ance
",P
arag
raph3.I
m- f
r
om di
re
ctsu
nl
ig
htan
d s
tr
ongar
ti
f
ic
ia
lli
gh
twi
thahi
gh
p
rop
erst
orag
e c
an s
i
gnif
i
cant
l
y s
ho
rt
enthes
erv
ic
e l
i
fe q
uant
it
yofUVra
ys.T
hew i
ndo
wsofth
est
or
ager
ooms
o
ft
hehos
e. a
re,f
ort
hi
s r
eas
on
,tobecov
er
edwit
ha r
edor
ora
nge
(
but
neve
rbl
ue)
pr
ot
ect
iv
ecoat
ofpa
in
t.Us
i
ngno
rmal
li
ght
S
tor
agero
om b
ul
bsfor
li
ght
i
ngi
spr
ef
era
ble
.
T
hest
or
ageroo
m s
houl
dbecool
,dr
y,f
r
eefr
omdus
tand
mod
era
tel
ywel
lven
ti
l
at
ed.St
ora
geouti
nth
e op
enth
at Ozon
e
d
oesno
tpr
ote
cta
gain
st
th
e we
ath
eri
sno
tsu
it
abl
e. Asoz
oneispa
rt
i
cul
ar
lyha
rmf
ul
,st
or
ager
oomsmus
tnot
c
ont
ai
n an
yozon
egene
rat
i
ngequi
pme
nt,
su
chas
el
ect
ri
c
T
emper
atu
re mot
or
sorot
herk
i
ndsof
equi
pmen
twhi
chcou
l
dgene
rat
e
R
ubber
produ
ct
sshou
l
d not
be s
to
re
d be
low10°Cora sp
arkorot
her
ki
ndofel
ect
r
ic
alcha
rge
.Com-
bus
t
ibl
e
a
bove+15°C,wh
ere
byth
isl
i
mit
canbeex
ce-
eded
upto g
ass
esandvapo
ur
swhi
chcou
ldge
ner
ate
ozo
nebyway
+
25 °
C.H i
ghe
rt
emper
at
ure
sareon
l
yall
owabl
efo
rve
ry o
fphot
och
emic
al
pro
cess
ess
hou
ldber
emov
ed.
s
hor
tpe
ri
odsof
ti
me.
F
in
all
y
, al
lr
ubbe
rpr
oduct
ssh
oul
d b
e s
to
re
d a
ccor
di
ng
He
ati
ng t
ot
he"f
ir
st
in,
fi
rs
to
ut
"pri
nc
ip
le,
asanunu
su
al
l
ylo
ngst
or-
I
nhe
ate
d s
t
orag
eroo
msrub
berpr
odu
ct
smus
tbepr
ot
ect
ed a
geperi
odcand
ete
ri
or
at
e t
heph
ysi
ca
lpr
ope
rt
i
esof
rub-
f
r
om h
eatso
urc
es
.Thedi
st
anc
e be
tw
eenth
eheats
our
ce b
erpr
oduct
sev
enu
nder
th
ebest
ofc
ondi
t
io
ns.
a
ndth
est
ore
d m
at
eri
al
smus
tbeat
le
as
toneme
te
r.
OurI
SO 90
01:2
000 c
er
ti
f
ie
d q
ual
it
ymana
gemen
t
s
ys
te
m en
su
re
st
hes
amehi
ghl
eve
lp
rodu
ctqu
al
i
tyi
nal
l
s
t
agesof
th
eman
uf
ac
tu
ri
ngpr
oc
es
s.I
nacc
or
dan
cewit
h
e
ver
-
morede
man
di
ngus
err
equ
ir
e
ment
s,t
het
ube
sand
c
ove
rsofou
rSe
mp
eri
tho
se
s a
remadef
ro
m ca
re
fu
ll
y
s
el
ec
te
d a
ndt
es
te
dr
ubb
ermi
xt
ur
es
.Wemakes
t
at
e-
of
-t
he
-
a
rth
os
escom
bi
ne
dwit
ht
ext
i
lean
dmet
alr
ei
nf
or
ce
ment
s
t
omee
tt
her
eq
ui
re
men
ts
fo
rt
heapp
l
ic
at
ion
.
A
ll
bus
in
es
st
r
ans
ac
ti
on
sar
ee
xc
lu
si
vel
ygov
er
nedb
y ou
rge
ne
ra
lt
er
msof P
u
bl
i
cat
i
ondat
e/
St
at
eof
ca
ta
l
ogu
ei
nf
or
mat
i
on:
Au
gus
t2
006
,
1s
te
di
t
io
n.
We
b
us
in
es
s.We
ass
um
enore
s
po
nsi
bi
l
it
yf
ormi
spr
i
nt
sorer
r
or
s.P
er
mi
s
si
ont
o c
o
nt
i
nuo
usl
ywor
kat
adv
anc
i
ngo
ur
pro
du
ct
sfo
ro
urcu
s
t
ome
r
s.P
l
ea
sek
e
ep
r
ep
ri
nt
orc
op
yt
hi
sc
at
al
ogu
e(
i
nwho
leor
inp
ar
t)
m u
st
beo
bta
in
ed
in
wri
t
in
g y
ou
r
se
lf
i
nfo
rmedr
e
gul
ar
ly
ab
ou
tt
hemo
st
re
cen
tp
ro
duc
t
spe
c
i
fi
c
at
io
ns
ei
t
he
r
f
r
om S
emp
er
i
tT
ec
hn
is
ch
ePr
od
uk
teGmbH.
Thi
sc
ata
l
oguei
st
hep
r
ope
rt
yof a
twww
.s
emper
f
le
x.
co
m,orc
on
ta
ctou
r s
pe
ci
al
i
std
ea
le
r
sorSe
mp
er
it
S
empe
r
itT
e
ch
ni
sc
he
GmbHa
ndr
ep
res
ent
st
hem
ost
cur
r
ent
ver
s
io
n.
Th
eho
sesapp
l
i
cat
i
onsen
gi
ne
er
s.
s
ho
wni
nth
i
sl
i
te
ra
t
ur
ear
es
ch
ema
ti
cd
iag
rams
onl
y
.
7
A
S
EM P
ERI
TAG HO
L
DI
NG
A-
1030Wie
n,Mo
d
ece
nte
rs
t
r
aße
2
2
P
ost
fa
ch201
T
el
.:+
43-1
-
79777
-
0
T
el
ef
ax:+4
3-
1-
797
77-
600
I
nt
er
net
:www
.se
mp
e
ri
t.
at
S
EM P
ERI
TTE
CH NI
SCHEPRODUK
T
E
GES.
M.B.
H.
Di
vi
si
onSe
mperf
le
x
A-
2632Wim
pass
in
g,Tr
i
est
erB
und
e
s
st
r
aße
2
6
T
el
.:+
43-2
630-
310-
201
T
el
ef
ax:+4
3-
2630-
310-
320
E
-mai
l
:sem
pe
rf
lex
@sempe
ri
t
.at
I
nt
er
net
:www
.se
m p
er
fl
ex
.co
m
C
O
NT
A
CT
–C
US
T
OM
E
RS
U
PP
O
RT
C
Z I H
S
EMPE
RF
LEXOPTI
MIT
,S.
R
.O. S
EM P
ERFL
E
XRO I
TERS.
R
.L
. S
EM P
ERM
EDMA
GYA
RORS
ZÁ
G
KF
T
.
C
Z-
7423
5 Odry I
–4 5
100Rov
igo,
ViaA
.Gr
an
di
5 H-
1025B
ud
ap
es
t
V
í
t
kov
sk
áč.
p.391/29 T
el
.:
+39-0
425-
410680 J
óz
sef
heg
y
iú
t
.28
-
30E/1
T
e
l
.:+4
2-
0556-
763111 T
el
ef
ax:+3
9-
0425-
41091
1 T
él
.
: +
3614
384
965
T
e
l
efa
x:+
42-
0556-
763199 E
-mai
l
:sem
pe
ri
t@r
oit
er
.
co
m T
el
ef
ax:+
36
143
8 4
966
E
-
mai
l
:sa
l
es@s
emper
fl
ex
.c
z I
nt
er
net
:www
.r
oit
er
.
it E
-mai
l
:se
ms
a
le
s@
t
-
onl
i
ne.
h
u
D E N
S
EM PE
RI
TTE
CH NI
SCHEPRO
D
U
KT
E
GMB
H S
EMP
ERI
TIBE
RI
CA S
.A. C
ARLF
UGLE
SANG A/
S
D-
58285Ge
vel
sbe
rg E
-
0 8
620San
tVi
cen
cde
ls
Ho
rt
s
, N
-
1 3
06Bae
ru
m P
tr
m.
Mühl
ens
t
r
aße25 P
o
l.I
nd.
Moli
del
sFr
ar
e
s, P
.
O.B
ox2
5 –Ho
lmave
i
en2
1
P
ost
fa
ch204
0 C
al
leA13
-15 T
e
l
.:+
47-
671768-
50
T
el
.:+49
-2
332-
7009-
0 T
e
l
.:+34
-
93-6
568060 T
e
l
efa
x:+
47-
671768-
51
T
el
ef
ax:+4
9-
2332-
7009-
22 T
e
l
efa
x:+
34-9
3-6
56702
6 E
-
mai
l
:ca
rl
@fu
gl
es
ang.
no
E
-mai
l
: v
er
ka
uf
@sem
peri
t
.d
e E
-
mai
l
:ro
it
er
@ro
it
er
.
es
I
nt
er
net
:www.
se
m p
er
it
.de D
K
S B
RDR
.ST
RI
CKER-
NIE
LS
ENA
/S
F S
EMPE
RI
TTEK
N I
SK
A PR
OD
U
KT
E
RA
B D
K-
295
0Ved
baek
S
EMP
ERI
TFR
A NC
ES.A.
R
.L
. S
E
-127
38Ska
rho
l
men, S
k
els
t
ede
t10
A –Pos
t
box
54
F
–9581
2 Ar
gen
t
eu
ilCe
de
x S
ät
r
a T
o
rg
.14 T
e
l
.:+4
5-
45-
891555
2
Pl
aceA
ri
st
i
de B
r
i
and T
e
l
.:+4
60-
8-
880420 T
e
l
efa
x:+
45-
45-
894415
T
e
l+3
3-
1-
302 58
725 T
e
l
efa
x:+
460-
8-
885228 E
-
mai
l:
mi
cha
el
@ s
t
ri
ni
.
com
T
e
l
efa
x+33
-1-
341
13211 E
-
mai
l:
i
nf
o@se
m p
er
it
.
se
E
-
mai
l
:se
mper
i
t.
ve
nt
es
@se
mpe
r
i
t
.f
r S
I
N
U
SA&CANADA S
EMPER
I
T I
NDUST
RI
ALPRO
DU
CT
S
G
B S
EMPE
RI
TI
ND U
STR
I
ALPR
ODU
CT
S
IN
C. S
I
NG AP
OREPTEL
TD.
S
EMP
ERI
TI
ND US
TRI
ALP
R
ODUC
TSL
T
D. F
a
irL
awn
,NJ0741
0
-
2814 3
791Ja
l
anBuk
itMe
ra
h
R
e
adi
ng,
Ber
ks
hi
reRG2O
GT 1
7-
01Po
l
li
t
tDri
v
e #
05-
22E-
cen
t
re@R
edh
i
ll
U
ni
tB6,
W o
rt
onDri
v
e T
e
l
.:+1
-2
01-
79777
94 S
i
nga
por
e 1
59 47
1
T
e
l
.:+4
4-
118-
9214807 T
e
l
efa
x:+
1-
201-
797
3899 T
e
l
:+65-
6275-
4690
T
e
l
efa
x:+
44-
118-
93138
4
2 E
-
mai
l:
b.
sh
aw@sem
p
er
it
-
usa
.
c
om T
e
l
efa
x:+
65-6
275-
467
0
E
-
mai
l
:ho
si
ng
sal
es
@ s
emp
e
r
it
.
co.
u
k E
-
mai
l:
ca
nad
a@sem
p
er
it
-
usa
.
c
om E
-
mai
l
: s
e
m p
er
it
@si
gn
et
.
com.
s
g
TM1 - TANKMEISTER®
Tanker hose
Application:
Compact suction and delivery hose for filling and
discharging tanks, petrol tankers and ships with un
leaded fuels (EN228:2004) with oxygen content
limited according to EEC 85/536 and with an aro
matic content of components 50% max.
Temperature range: -30°C / +90°C.
Suitable for industrial oils, diesel oils (EN
590:2004), fuel oils (DIN 51 603 parts 1 - 5) and Safety factor: 4 : 1
mineral-oil based hydraulic oils. Tube: NBR, black, smooth, electrically conductive.
Also suitable for applications according to EN Reinforcement: Textile braided (ID > 75mm, wrapped),
12115 in the petrochemicals industry. 2 crossed copper wires, zinc plated steel wire helix.
Feature: Cover: CR, black, electrically conductive, abrasion res
This hose has been tested according to the technic istant, oil and weather resistant, cloth impression.
al Marking: Continuous transfer tape, yellow:
regulations for combustible liquids (TRbF) "SEMPERIT S TM1 Mineralöl/Oil Tankmeister® 1 SD
131/2:1992. PN 16 bar R < 106 Ohm" as well as continuous em
Standard/approval: bossed labelling according to EN 1761:1999 and
EN 12115:1999.
EN 1761:1999, EN 12115:1999.
Notice:
To ensure the assembly is leakproof, it must be
tested according to EN 12115:1999.
Date: 31.08.2007
FLEXIOIL
Tanker hose
Application:
Flexioil, the highly flexible suction and delivery hose
for filling and discharging tanks, petrol tankers and
ships with unleaded fuels (EN228:2004) with oxy
gen content limited according to EEC 85/536 and
with an aromatic content of components 50% max.
Temperature range: -30°C / +90°C.
Suitable for industrial oils, diesel oils (EN Safety factor: 4 : 1
590:2004), fuel oils (DIN 51 603 parts 1 - 5) and
mineral-oil based hydraulic oils. Tube: NBR, black, smooth, electrically conductive.
Reinforcement: Textile wrapped, 2 crossed copper
Also suitable for applications according to EN wires, zinc plated steel wire helix.
12115 in the petrochemicals industry.
Cover: CR, black, electrically conductive, abrasion res
Feature: istant, oil and weather resistant, cloth impression.
This hose has been tested according to the technic Marking: Continuous transfer tape, yellow:
al „SEMPERIT S FLEXIOIL Mineralöl/Oil SD PN ... R <
regulations for combustible liquids (TRbF) 106 Ohm“ as well as continuous embossed labelling
131/2:1992. according to EN 1761:1999 and EN 12115:1999.
Standard/approval:
EN 1761:1999, EN 12115:1999.
Notice:
To ensure the assembly is leakproof, it must be
tested according to EN 12115:1999.
ATTENTION: It is vital to be aware of the different
working pressures.
Date: 29.09.2010
TMSL
Tanker Hose
Application:
Very robust, compact suction and delivery hose for
filling and discharging petrol tankers and rail tank
wagons with unleaded fuels (EN 228:2004) with
oxygen components limited according to EEC
85/536 and with an aromatic content of 50%
max. Temperature range: -30°C / +90°C.
Suitable for industrial oils, diesel oils (EN Safety factor: 4 : 1
590:2004), fuel oils (DIN 51 603 parts 1 - 5), min Tube: NBR, black, smooth, electrically conductive.
eral oil based hydraulic oils.
Reinforcement: Textile wrapped, copper wire, zinc
Feature: plated double steel wire helix.
Very robust but also extremely flexible, due to Cover: CR, black, corrugated, electrically conductive,
special helix design. abrasion resistant, oil and weather resistant, cloth im
This hose has been tested according to the pression.
technical regulations for combustible liquids TRbF Marking: Continuous transfer tape, yellow:
131/2:1992. "SEMPERIT S TMSL Mineralöl/Oil Tankmeister® - su
perleicht SD PN 10 bar R < 106 Ohm" and continuous
Notice: labelling tape "S TMSL Jahr PN 10 bar Ω TRbF 131 /
Further development of the TML tanker hose. 2".
Due to the elongation of the special helix design,
we recommend maximum pressure of 6 bar be ap
plied, as is normally the case for filling perations.
Date: 29.05.2008
TME / SF 3000
Tanker S & D Hose
Application:
Compact suction and delivery hose for filling and
discharging tanks, petrol tankers and ships with un
leaded fuels (EN 28:2004) with oxygen content
limited according to EEC 85/536 and with an aro
matic content of components 50% max.
Temperature range: -30°C / +90°C.
Suitable for industrial oils, diesel oils (EN
590:2004), fuel oils (DIN 51 603 parts 1 - 5) and Safety factor: 3 : 1
mineral oil-based hydraulic oils. Tube: NBR, black, smooth, electrically conductive.
Standard/approval: Reinforcement: Textile braided (ID > 2", wrapped), 2
EN ISO 7840:2004 A2. crossed copper wires, zinc plated steel wire helix.
Notice: Cover: SBR/CR, black, abrasion and weather resistant,
cloth impression.
Approved by Lloyd´s Register of Shipping as mar
ine exhaust hose and fuel hose. Marking: Continuous ink transfer tape, blue:
"SEMPERIT S TME/SF 3000 Mineralöl/Oil SD PN
10 bar, ISO 7840:A2 Lloyd’s Register year".
Date: 31.08.2007
TMSE
Tanker S & D Hose
Application:
Suction and delivery hose for filling and discharging
tanks, petrol tankers and ships with unleaded fuels
(EN 28:2004) with oxygen content limited accord
ing to EEC 85/536 and with an aromatic content
of components 50% max.
Temperature range: -30°C / +90°C.
Suitable for industrial oils, diesel oils (EN Safety factor: 3 : 1
590:2004), fuel oils (DIN 51 603 parts 1 - 5) and
mineral oil-based hydraulic oils. Tube: NBR, black, smooth, electrically conductive.
Reinforcement: Textile wrapped, zinc plated double
steel wire helix (ID > 2 1/2" zinc plated steel wire
helix), 2 crossed copper wires.
Cover: SBR/CR, black, abrasion and weather resistant,
cloth impression.
Marking: Continuous coloured marking, white:
“SEMPERIT S TMSE Öl/Oil SD PN 10 bar”.
Date: 31.03.2010
TMR4
Mineral Oil S & D Hose
Application:
Suitable for use as an oil return hose according to
SAE 100/R4.
Standard/approval:
Temperature range: -40°C / +100°C.
SAE J517 Type: SAE 100/R4: 2003.
Safety factor: 4 : 1
Notice:
Tube: NBR, black, smooth, antistatic.
Hose is only suitable for oils according to SAE
100/R4. Reinforcement: Textile wrapped, zinc plated double
steel wire helix (ID > 2 1/2" zinc plated steel wire
ATTENTION: It is vital to be aware of the different helix).
working pressures.
Cover: SBR, black, abrasion resistant, ozone resistant,
cloth impression.
Marking: Continuous coloured marking, white:
"SEMPERIT S TMR4 Öl/Oil SD SAE 100/R4-.. DN in.
PN .. bar . Q/..".
Date: 03.09.2009
TM2 - TANKMEISTER®
Tanker Hose
Application:
Constant volume, certified reel mounted hose suit
able for delivering unleaded fuels (EN 228:2004)
with oxygen components limited according to EEC
85/536 and with an aromatic content of 50% max.
Suitable for industrial oils, diesel oils (EN Temperature range: -30°C / +90°C.
590:2004), fuel oils (DIN 51 603 parts 1 - 5), min
eral oil-based hydraulic oils. Safety factor: 4 : 1
Also suitable for applications according to EN Tube: NBR, black, smooth, electrically conductive.
12115 in the petrochemicals industry. Reinforcement: Textile braided (ID < 75mm, wrapped),
Feature: 2 crossed copper wires.
This hose has been tested according to the technic Cover: CR, black, electrically conductive, abrasion res
al regulations for combustible liquids (TRbF) istant, oil and weather resistant, cloth impression.
131/2:1992. Marking: Continuous ink transfer tape, yellow:
Standard/approval: "SEMPERIT S TM2 Mineralöl/Oil Tankmeister® 2 PN
20 bar R < 106 Ohm" as well as continuous embossed
EN 1761:1999, EN 12115:1999 labelling according to EN 1761:1999 and
Notice: EN12115:1999.
To ensure the assembly is leakproof, it must be
tested according to EN 1761:1999 and EN
12115:1999.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48104 2560 25,0 1 6,0 37,0 20 2 150 0,80 40
48104 3260 32,0 1 1/4 6,0 44,0 20 2 175 1,05 40
48104 3865 38,0 1 1/2 6,5 51,0 20 2 225 1,30 40
48104 5080 50,0 8,0 66,0 20 2 275 1,90 40
48104 6380 63,5 2 1/2 8,0 79,5 20 2 300 2,20 40
48104 7580 75,0 8,0 91,0 20 2 350 2,80 40
56104 0080 100,0 8,0 116,0 20 2 450 3,80 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TMH TANKMASTER®
Tanker Reel Mounted Hose
Application:
Suitable for fuel-oil tankers as a reel mounted hose
for the delivery of unleaded fuels (EN 228:2004),
diesel (EN 590:2004), kerosene and heating oils
(DIN 51 603 parts 1 - 5).
Feature: Temperature range: -40°C / +100°C.
This hose has been tested according to the technic
al regulations for combustible liquids (TRbF) Safety factor: 3 : 1
131/2:1992. Tube: NBR, black, smooth, oil resistant, electrically con
ductive.
Notice:
Available with red, non-conductive cover (NVC/ Reinforcement: Textile spiral construction, 2 crossed
SBR) on request. copper wires.
Cover: NBR/EPDM, black, smooth, ozone and oil res
istant.
Marking: Continuous coloured marking, green:
"SEMPERIT S TMH TANKMASTER ® Tankwagen/
Tank Truck PN 20 bar ELSTAT”.
Date: 31.08.2007
TEF 1360
Mineral Oil Hose
Application:
Delivery hose for filling and discharging petrol
tankers, tanks and ships, for unleaded fuels (EN
228:2004) with oxygen components limited
according to EEC 85/536 and with an aromatic
content of 50% max.
Temperature range: -30°C / +90°C.
Suitable for industrial oils, diesel oils (EN Safety factor: 3.15 : 1
590:2004), fuel oils (DIN 51 603 parts 1 - 5), min
eral oil-based hydraulic oils. Tube: NBR, black, smooth, electrically conductive.
Reinforcement: Textile wrapped, copper wire.
Feature:
Suitable as a reel mounted hose. Cover: CR, black, electrically conductive, abrasion res
istant, oil and weather resistant, cloth impression.
Electrically conductive: Resistance R < 106 Ohm Marking: Continuous transfer tape, yellow:
(according to EN ISO 8031:1997). "SEMPERIT S TEF Mineralöl/Oil Euroflex PN 16 bar R
Standard/approval: < 106 Ohm". * nominal dia with additional embossed
labelling acc. to EN 1360:2005.
EN 1360:2005.
* EN 1360 Dimension
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48135 2560 25,0* 6,0 37,0 16 2 150 0,75 40
48135 3265 32,0* 6,5 45,0 16 2 175 1,00 40
48135 3873 38,0* 7,25 52,5 16 2 225 1,25 40
48135 5073 50,0 7,25 64,5 16 2 350 1,70 40
48135 7580 75,0 8,0 91,0 16 2 750 2,50 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 09.02.2011
TSF
Mineral Oil Hose
Application:
Delivery hose for filling and discharging petrol
tankers, tanks as well as ships, for unleaded fuels
(EN 228:2004) with oxygen components limited
according to EEC 85/536 and with an aromatic
content of 50% max. Temperature range: -35°C / +80°C.
Suitable for industrial oils, diesel oils (EN Safety factor: 3.15 : 1
590:2004), fuel oils (DIN 51 603 parts 1 - 5), min
eral oil based hydraulic oils. Tube: NBR, black, smooth, electrically conductive.
Feature: Reinforcement: Textile wrapped, copper wire.
Lay-flat petrol tanker hose. Cover: SBR/CR, black, weather resistant, cloth impres
sion.
Notice:
Marking: Continuous coloured marking, white:
ATTENTION: It is vital to be aware of the different "SEMPERIT S TSF Öl/Oil SF Universal"
working pressures.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
48113 1340 13,0 1/2 4,0 21,0 20 2 0,30 40
48113 1945 19,0 3/4 4,5 28,0 20 2 0,50 40
48113 2545 25,0 1 4,5 34,0 17 2 0,60 40
48113 3245 32,0 1 1/4 4,5 41,0 15 2 0,75 40
48113 3845 38,0 1 1/2 4,5 47,0 15 2 0,85 40
48113 5045 50,0 4,5 59,0 10 2 1,00 40
48113 6545 65,0 4,5 74,0 9 2 1,25 40
48113 7545 75,0 4,5 84,0 8 2 1,40 40
56113 0050 100,0 5,0 110,0 6 2 2,10 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TM3-D- TANKMEISTER®
LPG Hose
Application:
Liquified gas delivery hose for filling and draining
vehicle tanks according to EN 1762:2007.
Feature:
Suitable as a reel mounted hose.
Extremely gas-tight tube, tested according to ISO Temperature range: -30°C/+70°C liquid gas
4080:1995 method 1. (+90°C motor fuel).
Safety factor: 4 : 1
Standard/approval:
Tube: NBR special, black, smooth, electrically conduct
EN 1762:2007, DVGW NG-4621BO0255. ive.
Notice: Reinforcement: Textile braided (ID > 75mm, wrapped),
Further development of TM3 design. Improved gas- 2 crossed copper wires.
tight construction according to ISO 4080 method Cover: CR, black, electrically conductive, abrasion res
1. istant, oil and weather resistant, cloth impression, pin-
pricked.
Marking: Continuous transfer tape, orange:
"SEMPERIT S TM3-D Flüssiggas/Öl LPG/Oil Tank
meister® 3 PN 25 bar EN 1762, DIN-DVGW
NG-4621BO0255" as well as continuous labelling
tape: "SEMPERIT S EN 1762:2007 TM3-D D ID PN
25 Ω Quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48105 1960 19,0 3/4 6,0 31,0 25 2 150 0,65 40
48105 2560 25,0 1 6,5 38,0 25 2 200 0,80 40
48105 3260 32,0 1 1/4 6,5 45,0 25 2 250 1,05 40
48105 3870 38,0 1 1/2 7,0 52,0 25 2 320 1,30 40
48105 5080 50,0 8,0 66,0 25 2 400 1,90 40
48105 7590 75,0 9,0 93,0 25 4 650 2,95 40
48105 0010 100,0 10,0 120,0 25 4 800 4,50 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 01.04.2010
TAPC
Aircraft Refuelling Hose
Application:
Suitable for conveying aircraft fuels.
Standard/approval:
EN 1361:2004 Type C and API 1529:2005. Temperature range: -30°C / +65°C.
Approved by: SHELL, ESSO, EXXON, Air BP. Safety factor: 4 : 1
Notice: Tube: NBR, black, smooth.
Limited vacuum resistance. Reinforcement: Textile braided (ID > 75mm, wrapped).
Cover: CR, black, electrically conductive, abrasion res
istant, oil and weather resistant, cloth impression.
Marking: Continuous transfer tape, yellow:
"SEMPERIT S TAPC Aircraft Refueling Airport EN 1361
Type C PN 20 API 1529 GRADE 2" and labelling
according to EN 1361 Type C and API 1529.
Date: 09.09.2009
TAPE
Aircraft Refuelling S & D Hose
Application:
Suction and delivery hose suitable for aircraft fuels
(with steel wire helix).
Standard/approval:
EN 1361:2004 Type E. Temperature range: -30°C / +65°C.
Approved by SHELL, ESSO, EXXON, Air BP. Safety factor: 4 : 1
Date: 09.09.2009
TAPF
Aircraft Refuelling S & D Hose
Application:
Suction and delivery hose suitable for aircraft fuels
(with plastic helix).
Feature:
Temperature range: -30°C / +65°C.
Hose can be driven over (plastic helix recovers
form). Safety factor: 4 : 1
Standard/approval: Tube: NBR, black, smooth.
EN 1361:2004 Type F. Reinforcement: Textile wrapped, plastic helix.
Approved by SHELL, ESSO, EXXON, Air BP. Cover: CR, black, electrically conductive, abrasion res
istant, oil and weather resistant, cloth impression.
Marking: Continuous transfer tape, yellow:
"SEMPERIT S TAPF Aircraft Fueling EN 1361 Typ F ID
PN 20 bar Quarter/year Fabr.-Nr.".
Date: 09.09.2009
TEU/1360
Petrol Pump Hose
Application:
For unleaded fuels (EN 228:2004) with oxygen
components limited according to EEC 85/536 and
with an aromatic content of 50%.
Suitable for industrial oils, diesel oils (EN Temperature range: -30°C / +60°C.
590:2004), fuel oils (DIN 51 603 parts 1 - 5), and
mineral-oil based hydraulic oils. Safety factor: 3 : 1
Tube: NBR, black, smooth, electrically conductive.
Standard/approval:
EN 1360:2005. Reinforcement: Textile spiral construction.
Cover: CR, black, smooth, electrically conductive.
Marking: Continuous embossed labelling
"SEMPERIT S TEU Treibstoff/Fuel EN 1360 Type 1
DN PN 16 bar Ω quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68177 1650 16,0 5/8 5,0 26,0 16 2 80 0,46 -
68177 1960 19,0 3/4 6,0 31,0 16 2 100 0,66 -
68177 2155 21,0 5,5 32,0 16 2 130 0,63 -
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 07.06.2010
TOF 319
Petrol Pump Hose
Application:
For the delivery of unleaded fuels (EN228:2004),
diesel oils (EN 590:2004), kerosene and heating
oils (DIN 51 603 parts 1 - 5).
Notice: Temperature range: -40°C / +100°C.
ATTENTION: Does not conform to standard EN Safety factor: 3 : 1
1360:2005.
Tube: NBR/BR, black, smooth, electrically conductive.
Reinforcement: Textile spiral construction, 2 copper
wires.
Cover: NBR/EPDM, black, smooth, electrically con
ductive, limited oil resistant.
Marking: Continuous coloured marking, green:
"SEMPERIT S TOF 319 Treibstoff/Fuel DN PN 20 bar
Ω Quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68046 1650 15,9 5/8 5,0 26,0 20 2 100 0,43 50
68046 1960 19,0 3/4 6,0 31,0 20 2 120 0,62 50
68046 2560 25,0 1 6,0 37,0 20 2 150 0,80 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TU 10
Multi-Purpose Mineral Oil Hose
Application:
Flexible delivery hose suitable for unleaded fuels
(EN228:2004), diesel (EN 590:2004) and heat
ing oils (DIN 51 603 parts 1 - 5).
Applications in industry, garages, filling stations and Temperature range: -40°C / +80°C.
vehicle repair shops. Safety factor: 4 : 1
Notice: Tube: NBR, black, smooth, electrically conductive.
Electrically conductive: Resistance R < 106 Ohm/m
(according to EN ISO 8031:1997). Reinforcement: Textile spiral construction.
Cover: NBR/SBR, black, smooth, abrasion resistant, oil
ATTENTION: Not to be used as a petrol pump and weather resistant.
hose.
Marking: Continuous coloured marking, white:
"SEMPERIT S TU 10 Öl/Luft Oil/Air PN 10 bar Con
ductive R < 106 Ohm/m".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68173 0535 5,0 3/16 3,5 12,0 10 2 40 0,10 100
68173 0639 6,0 1/4 3,0 12,0 10 2 45 0,15 100
68173 0839 8,0 5/16 3,0 14,0 10 2 55 0,12 100
68173 1035 10,0 3/8 3,5 17,0 10 2 60 0,17 50
68173 1335 13,0 1/2 3,5 20,0 10 2 80 0,24 50
68173 1640 16,0 5/8 4,0 24,0 10 2 100 0,33 50
68173 1945 19,0 3/4 4,5 28,0 10 2 120 0,43 50
68173 2245 22,0 4,5 31,0 10 2 132 0,50 50
68173 2550 25,0 1 5,0 35,0 10 2 150 0,62 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 16.07.2009
TU 10 E - Line
Multi-Purpose Mineral Oil Hose
Application:
Flexible delivery hose suitable for mineral oil and
fuels with a maximum aromatic content of 30%, and
for compressed air.
Multi-purpose hose on an NBR based hose for di Temperature range: -40°C / +80°C.
verse applications in industry, garages, filling sta
tions and automobile repair shops. Safety factor: 4 : 1
Standard/approval: Tube: NBR, black, smooth, electrically conductive.
BS 2050:1978. Reinforcement: Textile spiral construction.
BS ISO 2878:2005. Cover: SBR/EPDM, black, smooth, abrasion resistant,
weather resistant.
Notice: Marking: Continuous coloured marking, white:
Electrically conductive: Resistance R < 106 Ohm/m "SEMPERIT S TU 10 E - LINE Öl/Luft Oil/Air PN 10
(according to EN ISO 8031:1997). bar Conductive R < 106 Ohm/m".
ATTENTION: Not to be used as a petrol pump
hose.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68193 0535 5,0 3/16 3,5 12,0 10 2 40 0,11 100
68193 0639 6,0 1/4 3,0 12,0 10 2 40 0,11 100
68193 0839 8,0 5/16 3,0 14,0 10 2 47 0,13 100
68193 0835 8,0 3,5 15,0 10 2 50 0,14 100
68193 1035 10,0 3/8 3,5 17,0 10 2 60 0,17 50
68193 1335 13,0 1/2 3,5 20,0 10 2 80 0,23 50
68193 1640 16,0 5/8 4,0 24,0 10 2 100 0,32 50
68193 1940 19,0 3/4 4,0 27,0 10 2 120 0,37 50
68193 2245 22,0 4,5 31,0 10 2 132 0,48 50
68193 2550 25,0 1 5,0 35,0 10 2 150 0,62 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 14.04.2009
TU 20
Multi-Purpose Mineral Oil Hose
Application:
Flexible delivery hose for unleaded fuels
(EN228:2004), diesel (EN 590:2004) and heat
ing oils (DIN 51 603 parts 1 - 5) and compressed
air.
Temperature range: -40°C / +80°C.
Multi-purpose hose on an NBR-basis for diverse ap
plications in industry, garages, filling stations and Safety factor: 3 : 1
automobile repair shops. Tube: NBR, black, smooth, electrically conductive.
Standard/approval: Reinforcement: Textile spiral construction.
BS 2050:1978. Cover: NBR/SBR, black, smooth, abrasion resistant, oil
BS ISO 2878:2005 . and weather resistant.
Marking: Continuous marking, white:
Notice: "SEMPERIT S TU 20 NBR Öl/Luft Oil/Air PN 20 bar
Electrically conductive: Resistance R < 106 Ohm/m Conductive R < 106 Ohm/m".
(according to EN ISO 8031:1997).
ATTENTION: Not to be used as a petrol pump
hose.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68179 0649 6,0 1/4 4,0 14,0 20 2 40 0,16 100
68179 0849 8,0 5/16 4,0 16,0 20 2 50 0,20 100
68179 1040 10,0 3/8 4,0 18,0 20 2 60 0,22 50
68179 1340 13,0 1/2 4,0 21,0 20 2 80 0,28 50
68179 1645 16,0 5/8 4,5 25,0 20 2 100 0,38 50
68179 1950 19,0 3/4 5,0 29,0 20 2 120 0,50 50
68179 2555 25,0 1 5,5 36,0 20 2 150 0,69 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TU 20 E - Line
Multi-Purpose Mineral Oil Hose
Application:
Flexible delivery hose suitable for mineral oil and
fuels with a maximum aromatic content of 30%, and
for compressed air.
Multi-purpose hose on an NBR based hose for di Temperature range: -40°C / +80°C.
verse applications in industry, garages, filling sta
tions and vehicle repair shops. Safety factor: 3 : 1
Standard/approval: Tube: NBR, black, smooth, electrically conductive.
BS 2050:1978. Reinforcement: Textile spiral construction.
BS ISO 2878:2005. Cover: SBR/EPDM, black, smooth, abrasion resistant,
oil and weather resistant.
Notice: Marking: Continuous coloured marking, white:
Electrically conductive: Resistance R < 106 Ohm/m "SEMPERIT S TU 20 E - LINE NBR Öl/Luft Oil/Air PN
(according to EN ISO 8031:1997). 20 bar Conductive R < 106 Ohm/m".
ATTENTION: Not to be used as a petrol pump
hose.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68172 0649 6,0 1/4 4,0 14,0 20 2 40 0,13 100
68172 0849 8,0 5/16 4,0 16,0 20 2 50 0,16 100
68172 1040 10,0 3/8 4,0 18,0 20 2 60 0,19 50
68172 1340 13,0 1/2 4,0 21,0 20 2 80 0,28 50
68172 1645 16,0 5/8 4,5 25,0 20 2 100 0,38 50
68172 1950 19,0 3/4 5,0 29,0 20 2 120 0,49 50
68172 2555 25,0 1 5,5 36,0 20 2 150 0,70 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TU 25
Multi-Purpose Mineral Oil Hose
Application:
Flexible delivery hose suitable for industrial oils, un
leaded fuels (EN228:2004), diesel (EN
590:2004) heating oils (DIN 51 603 parts 1 - 5)
also for compressed air.
Temperature range: -40°C / +80°C.
Applications in industry, garages, filling stations and
automobile repair shops. Safety factor: 3.15 : 1
Notice: Tube: NBR, black, smooth, electrically conductive.
Electrically conductive: Resistance R < 106 Ohm/m Reinforcement: Textile spiral construction.
(according to EN ISO 8031:1997). Cover: NBR/SBR, black, smooth, abrasion resistant, oil
ATTENTION: Not to be used as a petrol pump and weather resistant.
hose. Marking: Continuous coloured marking, white:
"SEMPERIT S TU 25 Öl/Luft Oil/Air PN 25 bar Con
ductive R < 106 Ohm/m". Additionally: 3 red longitud
inal stripes.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68175 0649 6,0 1/4 4,0 14,0 25 2 40 0,17 100
68175 0849 8,0 5/16 4,0 16,0 25 2 50 0,19 100
68175 1040 10,0 3/8 4,0 18,0 25 2 60 0,23 50
68175 1340 13,0 1/2 4,0 21,0 25 2 80 0,28 50
68175 1645 16,0 5/8 4,5 25,0 25 2 100 0,38 50
68175 1950 19,0 3/4 5,0 29,0 25 2 120 0,50 50
68175 2050 20,0 5,0 30,0 25 2 120 0,52 50
68175 2555 25,0 1 5,5 36,0 25 2 150 0,73 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TU25G
Multi-Purpose Mineral Oil Hose
Application:
Flexible delivery hose suitable for industrial oils, un
leaded fuels (EN228:2004), diesel (EN590:2004)
and heating oils (DIN 51 603 parts 1 - 5).
Applications in industry, garages, filling stations and Temperature range: -40°C / +80°C.
vehicle repair shops.
Safety factor: 3.15 : 1
Notice:
Tube: NBR, black, smooth, electrically conductive.
ATTENTION: Not to be used as a petrol pump
hose. Reinforcement: Textile spiral construction.
Cover: NVC/NR, grey, smooth, abrasion resistant, isol
ating, weather resistant and limited oil resistant.
Marking: Continuous coloured marking, white:
"SEMPERIT S TU 25G Öl/Luft, Oil/Air PN 25 bar ".
Additionally: 3 red longitudinal stripes.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68168 0635 6,0 1/4 3,5 13,0 25 2 40 0,15 60
68168 0840 8,0 5/16 4,0 16,0 25 2 50 0,22 60
68168 1040 10,0 3/8 4,0 18,0 25 2 60 0,25 60
68168 1340 13,0 1/2 4,0 21,0 25 2 80 0,30 60
68168 1645 16,0 5/8 4,5 25,0 25 2 100 0,40 60
68168 1950 19,0 3/4 5,0 29,0 25 2 120 0,53 60
68168 2555 25,0 1 5,5 36,0 25 2 150 0,72 60
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TU 40
Mineral Oil Hose
Application:
Flexible hose for industrial oils, heating and diesel
oils (EN 590:2004), as well as compressed air.
Feature:
For high pressure applications in industry, garages, Temperature range: -45°C / +90°C; Oil: -45°C
filling stations and automobile repair shops. / +90°C; Compressed air: -45°C / +70°C
Electrical conductivity: Resistance R < 106 Ohm/m. Safety factor: 4 : 1
Notice: Tube: NBR, black, smooth, electrically conductive.
ATTENTION: Not to be used as a petrol pump Reinforcement: Textile spiral construction.
hose. Cover: SBR/NVC, black, smooth, oil and weather res
istant.
Marking: Continuous coloured marking, white:
"SEMPERIT S TU40 Öl/Luft, Oil/Air PN 40 bar Con
ductive R < 106 Ohm/m".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68176 0435 4,0 3,5 11,0 40 2 50 0,11 -
68176 0635 6,0 1/4 3,5 13,0 40 2 64 0,15 -
68176 0835 8,0 5/16 3,5 15,0 40 2 73 0,18 -
68176 1035 10,0 3/8 3,5 17,0 40 2 77 0,22 -
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
OS2
Bunker S & D Hose
Application:
For suction and pressurising for delivery of liquid
mineral oil products (crude oil, diesel oil, etc., but
not liquid gas!) with an aromatic content of max.
50% .
Standard/approval: Temperature range: -35°C / +80°C.
EN 1765:2004 S Safety factor: 4 : 1
Notice: Tube: NBR, black, smooth, oil resistant, antistatic.
Steam cleaning at max. 120°C for max. 30 min, Reinforcement: Textile wrapped, zinc plated steel wire
unpressurised. helix, copper wire.
Up to max. 6" inside diameter also suitable for over Cover: CR, black, resistant to oil, abrasion, weather
head use. and sea water, antistatic, cloth impression.
Available with vulcanised hose nozzles with screw Marking: Continuous transfer tape, silver:
or flange ends (API, ASA, DIN or other) made of "SEMPERIT S“ and red embossed label on both sides
CS or SS. of the hose "SEMPERIT S OS2 EN 1765 S 15 DN
quarter/year PD 23".
Date: 31.08.2007
OS3
Lay-Flat Bunker Hose
Application:
Light-weight, lay-flat delivery hose for mineral oil
products with an aromatic content of 50% max.
Feature:
Electrical conductivity: Resistance R < 106 Ohm (ac
cording to EN ISO 8031:1997). Temperature range: -25°C / +80°C.
Safety factor: 3.5 : 1
Tube: NBR, black, smooth, electrically conductive.
Reinforcement: Textile wrapped, 2 crossed copper
wires
Cover: CR, black, electrically conductive, weather and
sea water resistant, cloth impression.
Marking: Continuous transfer tape, white:
"SEMPERIT S".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
56140 3750 75,0 7,5 90,0 16 4 2,70 40
56140 3760 76,2 3 7,5 91,2 16 4 2,70 40
56140 3000 100,0 8,0 116,0 16 4 3,90 40
56140 3100 101,6 4 7,5 116,6 16 4 3,70 40
56140 3060 150,0 10,0 170,0 16 2 7,60 40
56140 3080 200,0 11,0 222,0 16 2 10,30 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
OS4
Bunker Hose
Application:
Lightweight delivery hose for mineral oil products
with an aromatic content of 50% max.
Standard/approval:
EN 1765:2004 L
Temperature range: -25°C / +80°C.
Safety factor: 3.5 : 1
Tube: NBR, black, smooth
Reinforcement: Textile wrapped, 2 crossed copper
wires
Cover: CR, black, resistant to abrasion, oil, ozone,
weather and sea water, cloth impression.
Marking: Continuous transfer tape, silver:
"SEMPERIT S" and red embossed label on both sides
of the hose "SEMPERIT S OS4 EN 1765 L15 DN
quarter/year PD 23".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
56140 4510 51,0 2 6,0 63,0 15 4 1,50 40
56140 4630 63,5 2 1/2 6,0 75,5 15 4 1,80 40
56140 4760 76,2 3 6,0 88,2 15 4 2,00 40
56140 4100 102,0 4 7,0 116,0 15 4 3,20 40
56140 4030 127,0 5 8,0 143,0 15 4 4,40 40
56140 4060 152,0 6 8,0 168,0 15 4 5,20 40
56140 4080 203,0 8 10,5 224,0 15 4 9,50 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TDE
Roof Tank Drainage Hose
Application:
Hose for the drainage of rain water from fuel tank
roofs.
Feature:
Resistant to mineral oil products with an aromatic
content of no more than 50%. Temperature range: -25°C / +80°C.
Notice: Safety factor: 4 : 1
On request: Tube: NBR, black, smooth, oil resistant.
- VITON® - cover for aromatic content > 50% Reinforcement: Textile wrapped, double steel wire
- Vulcanised steel flange. helix, copper wire.
Cover: NVC, black, resistant to abrasion, ozone,
weather, oil and sea water, cloth impression.
Marking: None
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56129 7645 76,0 3 10,0 96,0 5 4 405 4,40 40
56129 8010 80,0 10,5 101,0 5 4 440 4,85 40
56129 1011 102,0 4 11,0 124,0 5 4 510 6,07 40
56129 1615 152,0 6 15,0 182,0 5 4 680 11,28 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TTR
Tank Cleaning Hose
Application:
Specially designed delivery hose for cleaning con
tainers, tanks and tank wagons with water.
Notice:
Also available with vulcanised flanges.
Temperature range: -35°C / +95°C.
Safety factor: 3 : 1
Tube: SBR, black, smooth.
Reinforcement: Textile wrapped, 2 protruding anti-stat
ic-steel wires
Cover: SBR, black, resistant to abrasion, ozone, weath
er and sea water, cloth impression.
Marking: Yellow marking tape, radial distance of 5 ft
(1.525m).
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56125 3880 38,0 1 1/2 8,0 54,0 25 2 250 1,55 40
56125 5180 51,0 2 8,0 67,0 25 2 300 2,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
TTS
Tar Spraying Hose
Application:
Suitable for use as tar spraying hose up to 180°C.
Based on Norm EN 13482.
The hose may be used for applications other than
tar spraying at temperatures up to 110°C. Temperature range: -35°C/max. +180°C for tar.
Feature: Safety factor: 8,75 : 1 for tar
The design with a steel wire braid and overlaid tex Tube: NBR, black, smooth, electrically conductive.
tile braid insert ensures good layer adhesion and
heat insulation. Reinforcement: 1 steel insert and 1 textile insert,
braided.
Electrical conductivity: Resistance R < 106 Ohm.
Cover: CR, black, electrically conductive, resistant to
Notice: abrasion, weather and sea water, cloth impression.
ATTENTION: The hose may only be used at tem Marking: Continuous labelling:
peratures of up to 180°C in accordance with in "SEMPERIT S TTS Teerspritz/Tarspray PN 16 bar".
structions. The application of solvents or the use of
flame to remove tar is not permitted. The hose must
be replaced even in the case of minor damage.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48702 1960 19,0 3/4 6,0 31,0 16 2 190 0,80 40
48702 2570 25,0 1 7,0 39,0 16 2 250 1,10 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
RESIST U UPEL-P
Chemical Hose
Application:
UPEL-P, the chemical protection hose with a black,
conductive UPE liner.
Suitable for the transport of acids, alkalis, salts, or
ganic compounds (alcohols, esters, ketones, etc.) in
cl. aromatic substances, chlorinated hydrocarbons Temperature range: Tube, depending on the discharge
and oxidising acids according to our chemical res medium up to +100°C, hose, flexible down to -35°C.
istance list. Steam cleaning, without pressure, up to 130°C / max.
Feature: 30 min.
The Resist U tube has an extremely low friction coef Safety factor: 4 : 1
ficient and good abrasion resistance. Tube: UPE, black, smooth, electrically conductive.
Standard/approval: Reinforcement: Special rubber foil, textile, 2 crossed
EN 12115:1999, TRbF 131/2:1992. copper wires, zinc plated steel wire helix.
Cover: EPDM, black, electrically conductive, abrasion
Notice: resistant, weather resistant, cloth impression.
ATTENTION: The temperature of the medium must
be lower than its boiling point. Marking: Continuous transfer tape, blue/white:
"SEMPERIT S Resist-U Chemie UPEL-P“, as well as con
ATTENTION: Please refer to the Semperit resist tinuous embossed labelling: "SEMPERIT S EN 12115
ance list or, in case of doubt, contact Semperit. UPEL-P SD (DN) PN 16 bar Ω quarter/year TRbF
131/2".
ATTENTION: Continuous use at the peak values re
duces the service life.
ATTENTION: To ensure the assembly is leakproof,
it must be tested according to EN 12115:1999.
Date: 31.08.2007
RESIST U UPE-P
Chemical Hose
Application:
UPE-P, the chemical protection hose with an insulat
ing and transparent UPE liner.
Suitable for the transport of acids, alkalis, salts,
organic compounds (alcohols, esters, ketones, etc.)
incl. aromatic substances, chlorinated hydrocarbons Temperature range: Tube, depending on the discharge
and oxidising acids according to our chemical res medium up to +100°C, hose, flexible down to -35°C.
istance list. Steam cleaning, without pressure, up to 130°C / max.
30 min.
Resist U has been successfully used for many years
in the pharmaceutical and cosmetic industries. Safety factor: 4 : 1
Feature: Tube: UPE, transparent, smooth, insulating.
The Resist U tube has an extremely low friction coef Reinforcement: Special rubber foil, textile, 2 crossed
ficient and good abrasion resistance. copper wires, zinc plated steel wire helix.
Cover: EPDM, black, electrically conductive, abrasion
Standard/approval: resistant, weather resistant, cloth impression.
EN 12115:1999, TRbF 131/2:1992. Marking: Continuous transfer tape, lilac/white:
Notice: "SEMPERIT S Resist-U Chemie UPE-P", as well as con
ATTENTION: The temperature of the medium must tinuous embossed labelling: "SEMPERIT S EN 12115
be lower than its boiling point. UPE-P SD (DN) PN 16 bar M quarter/year TRbF
131/2".
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit.
ATTENTION: Continuous use at the peak values
reduces the service life.
ATTENTION: To ensure the assembly is leakproof,
it must be tested according to EN 12115:1999.
Date: 29.09.2010
FLEXICHEM UPEL
Chemical Hose
Application:
Flexichem, the highly flexible chemical protection
hose with a black, conductive UPE liner.
Suitable for the transport of acids, alkalis, salts,
organic compounds (alcohols, esters, ketones, etc.)
incl. aromatic substances, chlorinated hydrocarbons Temperature range: Tube, depending on the discharge
and oxidising acids (cf. our chemical resistance list). medium up to +100°C, hose, flexible down to -35°C.
Steam cleaning, without pressure, up to 130°C / max.
Feature: 30 min.
The UPE tube has an extremely low friction coeffi
cient and good abrasion resistance. Safety factor: 4 : 1
Tube: UPE, black, smooth, electrically conductive.
Standard/approval:
Reinforcement: Special rubber foil, textile wrapped, 2
EN 12115:1999, TRbF 131/2:1992. crossed copper wires, zinc plated steel wire helix.
Notice: Cover: EPDM, black, smooth, electrically conductive,
ATTENTION: The temperature of the medium must abrasion resistant, weather resistant, cloth impression.
be lower than its boiling point. Marking: Continuous transfer tape, blue/white:
ATTENTION: Please refer to the Semperit resist "SEMPERIT S Chemie FLEXICHEM", and continuous
ance list or, in case of doubt, contact Semperit. embossed labelling: "SEMPERIT S EN 12115 FLEX
ICHEM SD (DN). PN 10 bar Ω quarter/year TRbF
ATTENTION: Continuous use at the peak values 131/2".
reduces the service life.
ATTENTION: To ensure the assembly is leakproof,
it must be tested according to EN 12115:1999.
Date: 29.09.2010
FLEXICHEM MOBIL
Chemical Hose
Application:
Flexichem Mobil has been specially developed for
use in tankers used to transport chemicals.
Suitable for the transport of acids, alkalis, salts, or
ganic compounds (alcohols, esters, ketones, etc.) in
cl. aromatic substances, chlorinated hydrocarbons Temperature range: Tube, depending on the discharge
and oxidising acids (see our chemical resistance medium up to +100°C, hose, flexible down to -35°C.
list). Steam cleaning, without pressure, up to 130°C / max.
30 min.
Feature:
The UPE tube has an extremely low friction coeffi Safety factor: 4 : 1
cient and good abrasion resistance. Tube: UPE, black, smooth, electrically conductive.
Very robust but also extremely flexible, due to spe Reinforcement: Textile wrapped, 2 crossed copper
cial spiral design. wires, zinc plated steel wire helix.
Standard/approval: Cover: EPDM, black, corrugated, electrically conduct
ive, abrasion resistant, weather resistant, cloth impres
EN 12115:1999, TRbF 131/2:1992. sion.
Notice: Marking: Continuous transfer tape, blue/white:
Further development of the UPEL Mobil hose. Due "SEMPERIT S Chemie FLEXICHEM Mobil PN 10 bar",
to the elongation of the special spiral design, we re and continuous embossed labelling: "SEMPERIT S EN
commend a maximum pressure of 6 bar, as is nor 12115 FLEXICHEM SD (DN) PN 10 bar Ω quarter/
mal for filling operations. year TRbF 131/2".
ATTENTION: The temperature of the medium must
be lower than its boiling point.
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit.
ATTENTION: Continuous use at the peak values re
duces the service life.
ATTENTION: To ensure the assembly is leakproof,
it must be tested according to EN 12115:1999.
Date: 31.08.2007
RESIST E EPDM
Chemical Hose
Application:
Suitable for use as a suction and discharge hose in
the chemical industry and in raw materials extrac
tion.
Resistant to hot water, detergents, non-oxidising
acids and alkalis. Temperature range: Tube, depending on discharge
Standard/approval: medium up to +95°C, hose, flexible down to -35°C,
EN 12115:1999, TRbF 131/2:1992. steam cleaning, without pressure, up to 130°C/max.
30min.
Notice: Safety factor: 4 : 1
ATTENTION: The temperature of the medium must
be lower than its boiling point. Tube: EPDM, black, smooth, electrically conductive.
Reinforcement: Textile, 2 crossed copper wires, zinc
ATTENTION: Please refer to the Semperit resist plated steel wire helix.
ance list or, in case of doubt, contact Semperit.
Cover: EPDM, black, electrically conductive, abrasion
ATTENTION: Continuous use at the peak values re resistant, weather resistant, cloth impression.
duces the service life.
Marking: Continuous transfer tape, lilac:
ATTENTION: To ensure the assembly is leakproof, "SEMPERIT S Resist-E Chemie EPDM“, as well as con
it must be tested according to EN 12115:1999. tinuous embossed labelling: "SEMPERIT S EN 12115
EPDM SD (DN) PN 16 bar Ω quarter/year TRbF
131/2".
Date: 31.08.2007
RESIST E EPDO
Chemical Hose
Application:
Suitable for use as a suction and discharge hose in
the chemical industry and in raw materials extrac
tion.
Resistant to hot water, detergents, non-oxidising
acids and alkalis. Temperature range: Tube depending on the discharge
Standard/approval: medium up to +95°C, hose flexible down to -35°C.
EN 12115:1999, TRbF 131/2:1992. Steam cleaning, without pressure, up to 130°C/max.
30 min.
Notice: Safety factor: 4 : 1
ATTENTION: The temperature of the medium must
be lower than its boiling point. Tube: EPDM, black, smooth, electrically conductive.
Reinforcement: Textile, 2 crossed copper wires.
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit. Cover: EPDM, black, electrically conductive, abrasion
resistant, weather resistant, cloth impression.
ATTENTION: Continuous use at the peak values re
duces the service life. Marking: Continuous transfer tape, lilac:
"SEMPERIT S Resist-E Chemie EPDM“, as well as con
ATTENTION: To ensure the assembly is leakproof, tinuous embossed labelling: "SEMPERIT S EN 12115
it must be tested according to EN 12115:1999. EPDM D (DN) PN 16 bar Ω quarter/year TRbF
131/2".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48355 1960 19,0 3/4 6,0 31,0 16 2 125 0,60 40
48355 2560 25,0 1 6,0 37,0 16 2 150 0,70 40
48355 3260 32,0 1 1/4 6,0 44,0 16 2 175 0,90 40
48355 3865 38,0 1 1/2 6,5 51,0 16 2 225 1,20 40
48355 5080 50,0 8,0 66,0 16 2 275 1,70 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FLEXICHEM EPDM
Chemical Hose
Application:
Suitable for use as a suction and discharge hose in
the chemical industry and in raw materials extrac
tion.
Resistant to hot water, detergents, non-oxidising
acids and alkalis. Temperature range: Tube, depending on discharge
medium up to +95°C, hose, flexible down to -35°C,
Standard/approval: steam cleaning, without pressure, up to 130°C/max.
EN 12115:1999, TRbF 131/2:1992. 30min.
Notice: Safety factor: 4 : 1
ATTENTION: The temperature of the medium must Tube: EPDM, black, smooth, electrically conductive.
be lower than its boiling point. Reinforcement: Textile, 2 crossed copper wires, zinc
ATTENTION: Please refer to the Semperit resist plated steel wire helix.
ance list or, in case of doubt, contact Semperit. Cover: EPDM, black, electrically conductive, abrasion
resistant, weather resistant, cloth impression.
ATTENTION: Continuous use at the peak values
reduces the service life. Marking: Continuous transfer tape, lilac:
"SEMPERIT S FLEXICHEM EPDM“, as well as continu
ATTENTION: To ensure the assembly is leakproof, ous embossed labelling: "SEMPERIT S EN 12115
it must be tested according to EN 12115:1999. EPDM SD (DN) PN 10 bar Ω quarter/year TRbF
131/2".
Date: 11.11.2010
RESIST M NBR2
Chemical Hose
Application:
A chemical hose for many discharge media accord
ing to the Semperit resistance list.
Suitable for use as a mineral oil hose for numerous
commercial mineral oil products.
Temperature range: Tube, depending on discharge
Feature: medium up to +80°C, hose, flexible down to -35°C,
The tube is abrasion resistant, antistatic and does steam cleaning, without pressure, up to 130°C/max.
not impart colour to the medium conveyed. 30min.
Standard/approval: Safety factor: 4 : 1
EN 12115:1999, TRbF 131/2:1992. Tube: NBR2, white, smooth, abrasion resistant, antistat
ic.
Notice:
Reinforcement: Textile, 2 crossed copper wires, zinc
ATTENTION: The temperature of the medium must plated steel wire helix.
be lower than its boiling point.
Cover: CR, black, electrically conductive, abrasion res
ATTENTION: Please refer to the Semperit resist istant, oil and weather resistant, cloth impression.
ance list or, in case of doubt, contact Semperit.
Marking: Continuous transfer tape, light blue:
ATTENTION: Continuous use at the peak values "SEMPERIT S Resist-M Chemie NBR2", as well as con
reduces the service life. tinuous embossed labelling: "SEMPERIT S EN 12115
NBR2 SD (DN) PN 16 bar Ω quarter/year TRbF
ATTENTION: To ensure the assembly is leakproof, 131/2".
it must be tested according to EN 12115:1999.
Date: 29.09.2010
RESIST M NBRO
Chemical Hose
Application:
Mineral oil hose for a wide range of commercial
mineral oil products.
A chemical hose for many discharge media accord
ing to the Semperit resistance list.
Feature: Temperature range: Tube, depending on discharge
The tube is abrasion resistant, antistatic and does medium up to +80°C, hose, flexible down to -35°C,
not impart colour to the medium conveyed. steam cleaning, without pressure, up to 130°C/max.
30min.
Standard/approval: Safety factor: 4 : 1
EN 12115:1999, TRbF 131/2:1992. Tube: NBR2, white, smooth, abrasion resistant, antistat
Notice: ic.
ATTENTION: The temperature of the medium must Reinforcement: Textile, 2 crossed copper wires.
be lower than its boiling point. Cover: CR, black, electrically conductive, abrasion res
ATTENTION: Please refer to the Semperit resist istant, oil and weather resistant, cloth impression.
ance list or, in case of doubt, contact Semperit. Marking: Continuous transfer tape, light blue:
"SEMPERIT S Resist-M Chemie NBR2", as well as con
ATTENTION: Continuous use at the peak values tinuous embossed labelling: "SEMPERIT S EN 12115
reduces the service life. NBR O D (DN) PN 16 bar Ω quarter/year TRbF
ATTENTION: To ensure the assembly is leakproof, 131/2".
it must be tested according to EN 12115:1999.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56350 1960 19,0 3/4 6,0 31,0 16 2 125 0,65 40
56350 2560 25,0 1 6,0 37,0 16 2 150 0,80 40
56350 3260 32,0 1 1/4 6,0 44,0 16 2 175 1,05 40
56350 3865 38,0 1 1/2 6,5 51,0 16 2 225 1,30 40
56350 5080 50,0 8,0 66,0 16 2 275 1,75 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 29.09.2010
RESIST B CIIR
Chemical Hose
Application:
Suitable for use as a suction and discharge hose in
the chemical industry and in raw materials extrac
tion.
Resistant to hot water, detergents, non-oxidising
acids and alkalis.
Temperature range: Tube, depending on discharge
Feature: medium up to +95°C, hose, flexible down to -35°C,
High gas density. steam cleaning, without pressure, up to 130°C/max.
30min.
Standard/approval: Safety factor: 4 : 1
EN 12115:1999, TRbF 131/2:1992. Tube: CIIR (chlorobutyl), black, smooth, electrically con
Notice: ductive.
ATTENTION: The temperature of the medium must Reinforcement: Textile, 2 crossed copper wires, zinc
be lower than its boiling point. plated steel wire helix.
ATTENTION: Please refer to the Semperit resist Cover: EPDM, black, electrically conductive, abrasion
ance list or, in case of doubt, contact Semperit. resistant, weather resistant, cloth impression.
Marking: Continuous ink transfer tape, lilac:
ATTENTION: Continuous use at the peak values "SEMPERIT S Resist-B Chemie CIIR", as well as continu
reduces the service life. ous embossed labelling: "SEMPERIT S EN 12115 CIIR
ATTENTION: To ensure the assembly is leakproof, SD (DN) PN 16 bar Ω quarter/year TRbF 131/2".
it must be tested according to EN 12115:1999.
Date: 29.09.2010
RESIST X XLPE
Chemical Hose
Application:
A heavy duty suction and discharge hose for use
with various (concentrated) acids and chemicals.
Also suitable for industrial liquids, sea water and
chemical fertilisers.
Standard/approval: Temperature range: -20°C / +70°C
EN 12115:1999, TRbF 131/2:1992. Safety factor: 4 : 1
Tube: PE-X, transparent, insulating, smooth.
Notice:
ATTENTION: The temperature of the medium must Reinforcement: Textile, 2 crossed copper wires, zinc
be lower than its boiling point. plated steel wire helix.
Cover: EPDM, black, electrically conductive, resistant
ATTENTION: Please refer to the Semperit resist to abrasion, ozone, acid and weather, cloth impres
ance list or, in case of doubt, contact Semperit. sion.
ATTENTION: Continuous use at the peak values re Marking: Continuous transfer tape, blue/white:
duces the service life. "SEMPERIT S Resist-X Chemie XLPE", as well as continu
ATTENTION: To ensure the assembly is leakproof, ous embossed labelling: "SEMPERIT S EN 12115 XLPE
it must be tested according to EN 12115:1999. SD (DN) PN 16 bar M quarter/year TRbF 131/2".
Capped ends to protect the inserts available on re
quest.
Date: 31.08.2007
RESIST X XLPO
Chemical Hose
Application:
A heavy duty suction hose for use with various (con
centrated) acids and chemicals.
Also suitable for many industrial liquids, sea water
and chemical fertilisers.
Standard/approval: Temperature range: -20°C / +70°C.
EN 12115:1999, TRbF 131/2:1992. Safety factor: 4 : 1
Notice: Tube: PE-X, transparent, insulating, smooth.
ATTENTION: The temperature of the medium must Reinforcement: Textile, 2 crossed copper wires.
be lower than its boiling point. Cover: EPDM, black, electrically conductive, resistant
ATTENTION: Please refer to the Semperit resist to abrasion, ozone, acid and weather, cloth impres
ance list or, in case of doubt, contact Semperit. sion.
Marking: Continuous transfer tape, blue/white:
ATTENTION: Continuous use at the peak values "SEMPERIT S Resist-X Chemie XLPE", as well as continu
reduces the service life. ous embossed labelling: "SEMPERIT S EN 12115
ATTENTION: To ensure the assembly is leakproof, XLPO D (DN) PN 16 bar M quarter/year TRbF
it must be tested according to EN 12115:1999. 131/2".
Capped ends to protect the inserts available on
request.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48370 1960 19,0 3/4 6,0 31,0 16 2 190 0,40 40
48370 2560 25,0 1 6,0 37,0 16 2 225 0,50 40
56370 3260 32,0 1 1/4 6,0 44,0 16 2 265 0,75 40
56370 3865 38,0 1 1/2 6,5 51,0 16 2 340 1,30 40
56370 5080 50,0 8,0 66,0 16 2 415 1,70 40
56370 6380 63,0 2 1/2 8,0 79,0 16 2 450 2,00 40
56370 7580 75,0 8,0 91,0 16 2 525 2,60 40
56370 0080 100,0 8,0 116,0 16 2 675 3,80 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 29.09.2010
RESIST P FEP
Chemical Hose
Application:
FEP, the premium chemical hose with teflon tube.
Suitable for transporting nearly all chemicals used in
the chemical industry (see our resistance list).
Feature: Temperature range: Tube, depending on discharge
Tube: excellent resistance and impervious to chem medium up to +150°C, hose, flexible down to -20°C.
icals. Steam cleaning, without pressure, up to 130°C/max.
Highly temperature resistant. 30 min.
Safety factor: 4 : 1
Standard/approval:
EN 12115:1999, TRbF 131/2:1992. Tube: FEP, smooth, isolating.
Reinforcement: Textile wrapped, 2 crossed copper
Notice: wires, zinc plated steel wire helix.
ATTENTION: The temperature of the medium must Cover: EPDM, black, electrically conductive, abrasion
be lower than its boiling point. resistant, weather resistant, cloth impression.
ATTENTION: Please refer to the Semperit resist Marking: Continuous transfer tape, red/white/blue:
ance list or, in case of doubt, contact Semperit. "SEMPERIT S Resist-P-Chemie FEP" as well as continu
ATTENTION: Continuous use at the peak values re ous embossed labelling: "SEMPERIT S EN 12115 FEP
duces the service life. SD (DN) PN 16 bar M quarter/year TRbF 131/2".
ATTENTION: To ensure the assembly is leakproof,
it must be tested according to EN 12115:1999.
Date: 30.04.2008
FOOD
CHEMICAL HOSES
RESISTANCE LIST
Suitability groups, inner layer of the hose
ABRASION
Acroleine 107028 - A A C A A A A
Acrylic acid 79107 C A A A - - - -
Acrylic acid ethyl ester see Ethyl acrylate
Acrylic acid methyl ester 96333 - - - C A A A A
Acrylonitrile 107131 B A A C A A A A
Adipic acid 124049 A A A A A A A A
Adipic diethyl ester 141286 - A A C A A A A
Alkyl benzene - C C C A A A A
Allyl alcohol 107186 A A A A A A A A
WATER
144
ABRASION
red,
blue lilac lilac green blue blue lilac
blue
Designation of the medium CASNr Conc.* white white white white
SEMPERIT designation of the hose
NBR2 EPDM CIIR CSM XLPE UPEL-P UPE-P FEP
Resist M E B C X U U P
Aniline 62533 C B A C A A A A
MINERAL OIL
Aniline hydrochloride 142041 C A A C A A A A
Anol see Cyclohexanol
Anon see Cyclohexanone
Arcton 12 see Dichloro difluoromethane
Arcton 22 see Chloro difluoromethane
Barium chloride, aqueous 10 361372 B A A A A A A A
Benzalchloride see Benzylidene chloride
Benzaldehyde 100527 C A B C A A A A
Benzene 71432 B C C C B A A A
VEHICLE
Benzene 71432 C C C C A A A A
Benzine A C C C A A A A
Benzine-Benzene-Ethanol-mixture 5:3:2 A C C C A A A A
Benzine-Benzene-mixture 1:1 A C C C A A A A
Benzoic acid, aqueous 65850 - A A A A A A A
Benzoic ethyl ester 93890 C A A C A A A A
Benzoic methyl ester 93583 C A A C A A A A
Benzyl alcohol 100516 C A A A A A A A
STEAM
Benzyl chloride 100447 C - - C A A A A
Benzylidene chloride 98873 C C C C A A A A
Bleaching powder see Calcium hypochlorite
Bleaching, solution off see sodium hypochlorit, solution off
Borax, aqueous 1303964 B A A A A A A A
Boric acid, aqueous 10 043353 B A A A A A A A
CHEMICAL
Brindi acid C A A A A A A A
Bromine 7726956 C C C C C C C A
Bromobenzene 108861 C C C C C C C A
Bunker C-oils see Heating oil H
Butanediol(1,3), aqueous 107880 - A A A A A A A
Butanediol(1,4) 110634 A A A A A A A A
Butanol 71363 A A A A A A A A
Butanon(2) see Ethyl methyl ketone
Butin(2)-diol(1,4) 110656 A A A A A A A A
WATER
Butyl acetate 123864 C C C C A A A A
Butyl acrylate 141322 C - - C A A A A
Butyl alcohol see Butanol
Butyl aldehyde n- 123728 C A A - A A A A
Butyl amine 109739 C B B C A A A A
Butyl benzoate 136607 C A A C A A A A
Butyl chloride n- see Chlorobutane(1)
Butyl diglycol acetate 124174 C A A C A A A A COMPR. AIR
Butyl ether 142961 C C C C A A A A
Butyl glycol acetate 112072 C A A C A A A A
Butyl glycol see Ethylene glycol monobutyl ether
Butyl oleate n- 142778 C A A C A A A A
Butylene glycol-1,4 see 1,4-Butanediol
Butyric acid 107926 C B C C A A A A
Butyric acid ethyl ester see Ethyl butyrate
Calcium acetate, aqueous 543908 - A A A A A A A
GAS
145
red,
blue lilac lilac green blue blue lilac
blue
Designation of the medium CASNr Conc.* white white white white
SEMPERIT designation of the hose
NBR2 EPDM CIIR CSM XLPE UPEL-P UPE-P FEP
Resist M E B C X U U P
Caustic soda see Soudim hydroxide solution of
MINERAL OIL
Chloroform 67663 C C C C A A A A
Chlorosulfonic acid 7790945 C C C C C C C A
Chlorosulfuric acid 7791255 C B B A C C C A
Chlorothene see Trichloroethane(1,1,1)
Chromic acid, solution 7738945 25% C C C C A A A A
Chromium salts, aqueous - A A A A A A A
Citric acid see citric acid
Citric acid, aqueous 77929 B A A A A A A A
STEAM
Cyclohexene 110838 B C C C A A A A
Cyclohexylamine 108918 C - - C A A A A
Decahydronaphthalene see Decalin
Decalin cis-/trans- 91178 A C C C A A A A
Desel fuel A C C B A A A A
Diacetone alcohol 123422 C A A A A A A A
Dibenzyl ether 103504 C B B C A A A A
COMP. AIR
146
ABRASION
red,
blue lilac lilac green blue blue lilac
blue
Designation of the medium CASNr Conc.* white white white white
SEMPERIT designation of the hose
NBR2 EPDM CIIR CSM XLPE UPEL-P UPE-P FEP
Resist M E B C X U U P
Dimethyl ether 115106 - C C C A A A A
MINERAL OIL
Dimethyl formamide N,N- 68122 C A A B A A A A
Dimethyl furane(2,5) 625865 C A A C A A A A
Dimethyl sulfoxide 67685 C A A C - - - -
Dinonyl phthalate 84764 C A A A A A A A
Dioctyl maleate 2915539 C A A C A A A A
Dioctyl phthalate 117840 C A A C A A A A
Dioctyl sebacate 2432873 C A A C A A A A
Dioxane(1,4) 123911 C A A C A A A A
Diphenyl 92524 C B B C C - - A
VEHICLE
Diphenyl ether 101848 C C C C C - - A
Epichlorohydrin 106898 C A A C A A A A
Ethanol 46175 A A A A A A A A
Ethanolamine 141435 C A A C A A A A
Ethyl acetate 141786 - A A B A A A A
Ethyl acrylate 140885 - - - C A A A A
Ethyl alcohol see Ethanol
Ethyl benzene 100414 B C C C A A A A
STEAM
Ethyl butanol(2) 97950 A A A A A A A A
Ethyl butyrate 105544 C A A C A A A A
Ethyl chloride 75003 C C C C A A A A
Ethyl chloroacetate 105395 C A A C A A A A
Ethyl diglycol see Diethylene glycol monoethyl ether
Ethyl ether 60297 C C C C A A A A
Ethyl glycol acetate see Ethylene glycol monoethyl ether
CHEMICAL
acetate
Ethyl glycol see Ethylene glycol monoethyl ether
Ethyl hexanol 104767 A A A B A A A A
Ethyl mercaptane 75081 C - - B A A A A
Ethyl methyl ketone 78933 C A A C A A A A
Ethyl oxalate 95921 C A A B A A A A
Ethylen glycol monoethyl ether 110805 A A A A A A A A
Ethylene chloride see 1,2-Dichloro ethane
WATER
Ethylene diamine 107153 A A A A A A A A
Ethylene glycol 107211 A A A A A A A A
Ethylene glycol monobutyl ether 111762 A A A A C - - A
Ethylene glycol monoethyl ether acetate 111159 - A A A A A A A
Ethylene oxide 75218 C A A C A A A A
Fatty acid A A A A B A A A
Fluorine, dry 7782414 - - - B C C C A
Formaldehyde, aqueous 50000 40 % B A A A A A A A
COMPR. AIR
Formic acid 64186 10 % C A A A A A A A
Formic acid 64186 100 % C A - A A A A A
Freon 12 see Dichloro difluoromethane
Freon 22 see Chloro difluoromethane
Frigen 12 see Dichloro difluoromethane
Frigen 22 see Chloro difluoromethane
Fuel oil S A C C C C A A A
Fuel oils A C C B A A A A
GAS
Furfural 98011 C A A A A A A A
Furfurol see Furfural
Furfuryl alcohol 98000 - - - A B A A A
Gelatine, aqueous 9000708 A A A A A A A A
Genantin (anti-freeze) A A A A A A A A
Glucose, aqueous - A A A A A A A
Glycerol 56815 A A A A A A A A
SIGMA
147
red,
blue lilac lilac green blue blue lilac
blue
Designation of the medium CASNr Conc.* white white white white
SEMPERIT designation of the hose
NBR2 EPDM CIIR CSM XLPE UPEL-P UPE-P FEP
Resist M E B C X U U P
Hexane n- 110543 A C C B A A A A
MINERAL OIL
Mercury 7439976 A A A A A A A A
Mercury salts, aqueous - A A A A A A A
Methanol 67561 A A A A A A A A
Methanol-Coolant see Water-Methanol mixture
Methoxy(3) propanol 1589497 B A A B A A A A
Methyl acetate 79209 C A A C A A A A
Methyl acrylate see Acrylic acid methyl ester
TECHN. DATA
148
ABRASION
red,
blue lilac lilac green blue blue lilac
blue
Designation of the medium CASNr Conc.* white white white white
SEMPERIT designation of the hose
NBR2 EPDM CIIR CSM XLPE UPEL-P UPE-P FEP
Resist M E B C X U U P
Methyl amine 74895 30 % C B B B A A A A
MINERAL OIL
Methyl chloride, dry, gaseous 74873 C C C C A A A A
Methyl chloroacetate 96344 C A A C A A A A
Methyl cyanide see Acetonitrile
Methyl dichloro acetate see Dichloro acetic acid methyl
ester
Methyl ethyl ketone see Ethyl methyl ketone
Methyl glykol 109864 A A A A A A A A
Methyl glykol acetate see Acetic acid -2- methoxy ethyl
ester
VEHICLE
Methyl isobutyl ketone 108101 C A A C A A A A
Methyl methacrylate 80626 C A A - A A A A
Methyl styrene-alpha 98839 C C C C B B B A
Methyl(2) butanol-2 75854 A A A A A A A A
Methylene chloride see Dichloro methane
Monochloro benzene see Chlorobenzene
Monochloroacetic acid ethyl ester see Ethyl chloroacetate
Monochloroacetic methyl ester see Methyl chloroacetate
STEAM
Monochloroethylene see Vinyl chlroride
Monochloromethane see Methyl chloride
Monoisopropanol amine see Amino (1) propanol (2)
Monostyrene see Styrene, monomeric
Naphta A C C C A A A A
Naphtalene 91203 C C C C C A A A
Nickel sulfate, aqueous 7786814 B A A A A A A A
CHEMICAL
Nitric acid 7697372 20 % C B B A A A A A
Nitric acid 7697372 40 % C B B B B B B A
Nitric acid 7697372 100 % C C C C C C C A
Nitro benzene 98953 C C C C A A A A
Nitro propane n- 108032 C A A A A A A A
Nitrogen, gaseous 7727379 A A A A A A A A
Nitrotoluol o- 88722 C C C C A A A A
Nitrous gases C A A A A A A A
WATER
Noble metal chlorides solutions of - A A A A A A A
Nonanol(1) 143088 A A A A A A A A
Nonyl alchohl see Nonano (1)
Nonyl(4)phenol 25 154523 C C C C A A A A
Octadecanoic acid 57114 A C B C A A A A
Octadecanoic acid 57114 A A A A A A A A
Octane 111659 A C C B A A A A
COMPR. AIR
Octanol(1) 111875 B B B B A A A A
Octyl alcohl see Octanol (1)
Oleic acid, saturated 112801 A A A A A A A A
Oleum 8014957 C C C C C - - -
Oxalic acid diethyl ester see Ethyl oxalate
Oxalic acid, aqueous 144627 B A A A A A A A
Ozone, gaseous 10 028156 C A A B A A A A
Palmitic acid 57103 A A B C A A A A
Paraffine A B B B A A A A
GAS
Petroleum spirit A C C C A A A A
Phenol 108952 C A A C A A A A
Phenyl ethyl ether 103731 C C C C A A A A
Phenyl hydrazine 100630 C B B C A A A A
Phosphoric acid ester C A A C A A A A
Phosphoric acid tributyl ester see Tributyl phosphate
Phosphoric acid, all concentrations 7664382 - A A A A A A A
TECHN. DATA
149
red,
blue lilac lilac green blue blue lilac
blue
Designation of the medium CASNr Conc.* white white white white
SEMPERIT designation of the hose
NBR2 EPDM CIIR CSM XLPE UPEL-P UPE-P FEP
Resist M E B C X U U P
Phosphorous oxichloride 10 025873 C B B B C C C A
MINERAL OIL
Silicon oils A A A A A A A A
Silicone grease A A A A A A A A
Silver salts aqueous - A A A A A A A
Soda see Sodium carbonate
Sodium acetate, aqueous 127093 B A A A A A A A
Sodium aluminate, aqueous 1302427 - A A A A A A A
Sodium carbonate, aqueous 497198 B A A A A A A A
Sodium chlorate, aqueous 7775099 - A A A A A A A
Sodium chloride, solution of 7647145 B A A A A A A A
GAS
150
ABRASION
red,
blue lilac lilac green blue blue lilac
blue
Designation of the medium CASNr Conc.* white white white white
SEMPERIT designation of the hose
NBR2 EPDM CIIR CSM XLPE UPEL-P UPE-P FEP
Resist M E B C X U U P
Sodium thiosulfate, aqueous 7772987 B A A A A A A A
MINERAL OIL
Solvent Naphtha see Heavy benzene
Stannic(II) chloride, aqueous 7772998 - A A A A A A A
Styrene, monomeric 100425 C C C C B B B A
Suflfuric acid fuming see Oleum
Sugar, aqueous 57501 B A A A A A A A
Sulfur dioxide, gaseous 7446095 C A A A A A A A
Sulfur dioxide, gaseous 7446095 C A A A A A A A
Sulfur hexafluoride 2551624 B A A B A A A A
Sulfur trioxide 7446119 C B B A A - - -
VEHICLE
Sulfuric acid 7664939 20 % - A A A A A A A
Sulfuric acid 7664939 50 % C B B A A A A A
Sulfuric acid 7664939 75 % C B B - A A A A
Sulfuric acid 7664939 96 % C C C - B B B A
Sulfurous acid 7782992 C A A A A A A A
Tall oil fatty acid A C C C A A A A
Tannic acid 1401554 C A A A A A A A
Tannic see Tannic acid
STEAM
Tar oil C - - C B A A A
Tartaric acid, aqueous 133379 - A A A A A A A
Tetrachlorethane, dry 79345 C C C C A A A A
Tetrachlorethene see Tetrachloroethylene
Tetrachloromethane 56235 C C C C A A A A
Tetrahydrofurane 109999 C C C C A A A A
CHEMICAL
Tetrahydronaphthalene 119642 C C C C A A A A
Tetralin see Tetrahydronaphthalene
Thionyl chloride 7719097 C C C C C - - -
Thiophene 110021 - C C C A A A A
Titanium tetrachloride 7550450 100 % C C C C - - - -
Toluene 108883 - C C C B B B A
Tributyl phosphate 126738 C A A C A A A A
Trichloroacetic acid 76039 C A A B A A A A
Trichloroethane(1,1,1) 71556 C C C C A A A A
WATER
Trichloroethene see Trichloroethylene
Trichloroethyl phosphate 306525 B A A A A A A A
Trichloroethylene 79016 C C C C A A A A
Tricresyl phosphate 1330785 B A A C A A A A
Triethanol amine 102716 A A A A A A A A
Triethyl amine 121448 A C C B A A A A
Triethylene glycol 112276 A A A A A A A A
Trimethyl amine 75503 A C C B A A A A COMPR. AIR
Trioctyl phosphate 1806548 B A A C A A A A
Turpentine 8006647 A C C C A A A A
Urea 57136 A A A A A A A A
Vaseline A A A A A A A A
Vinyl acetate 108054 C A A C A A A A
Vinyl chloride 75014 C - - C C C C A
Vinyl cyanide see Acrylonitrile
Water glass - A A A A A A A
GAS
151
Application:
Brake hose for vehicle air brake systems and other
pneumatic systems in vehicles and trailers.
Feature:
Oil resistant tube. Temperature range: -40°C / +70°C.
Standard/approval: Safety factor: 2.5 : 1
DIN 74310:1993. Tube: NBR/SBR, black, smooth, oil resistant.
Notice: Reinforcement: Textile spiral construction.
100% pressure tested. Cover: EPDM/SBR, black, smooth, abrasion resistant.
Complete inside diameter checked using a ball test. Marking: Continuous coloured marking, white:
"SEMPERIT S FBD Bremsschlauch/Air Brake DIN
74310 DN PN 10 bar week/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68430 0935 9,0 3,5 16,0 10 2 65 0,20 50
68430 1135 11,0 7/16 3,5 18,0 10 2 70 0,23 50
68430 1360 13,0 1/2 6,0 25,0 10 2 80 0,50 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FBE
Brake Hose
Application:
Hose for air brake systems.
Notice:
Also suitable for oil-laden air.
Temperature range: -40°C / +90°C.
Safety factor: 6,3 : 1
Tube: SBR/NR, black, smooth.
Reinforcement: Textile spiral construction.
Cover: SBR/EPDM, black, smooth, ozone resistant.
Marking: Continuous coloured marking, white:
"SEMPERIT S FBE Bremsschlauch/ Air-Brake DN PN
10 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68051 0440 4,0 4,0 12,0 10 2 40 0,15 50
68051 0640 6,0 1/4 4,0 14,0 10 2 60 0,18 50
68051 0840 8,0 5/16 4,0 16,0 10 2 80 0,22 50
68051 1040 10,0 3/8 4,0 18,0 10 2 100 0,26 50
68051 1240 12,0 4,0 20,0 10 2 120 0,30 50
68051 1355 13,0 1/2 5,5 24,0 10 2 130 0,46 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 02.02.2010
FBS
Brake Hose
Application:
A flexible hose for feed and control lines in air
brake systems of cars and for the transport of air
and water in industry.
Standard/approval: Temperature range: -40°C / +95°C.
SAE J1402:2006, Type A. Safety factor: 4,5 : 1
Tube: CR/NBR/SBR, black, smooth, limited oil resist
ance.
Reinforcement: Textile spiral construction.
Cover: CR/BR, black, smooth.
Marking: Continuous coloured marking, white:
"SEMPERIT S FBS Bremsschlauch/Air-Brake SAE
J1402 DN PN 14 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68431 0948 9,5 3/8 4,8 19,1 14 2 89 0,33 50
68431 1048 10,0 4,8 19,6 14 2 89 0,34 50
68431 1148 11,0 7/16 4,8 20,6 14 2 102 0,36 50
68431 1248 12,5 1/2 4,8 22,1 14 2 102 0,40 50
68431 1448 14,0 4,8 23,6 14 2 114 0,43 50
68431 1548 14,5 4,8 24,1 14 2 114 0,44 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 30.04.2008
FBH
Brake Hose
Application:
A flexible hose for hydraulic vehicle brake systems
using glycine-based liquids.
Feature:
Resistant to low temperatures. Temperature range: -45°C / +70°C.
Standard/approval: Safety factor: 7 : 1
SAE J1401:2003. Tube: SBR/BR, black, smooth.
Notice: Reinforcement: Textile braided.
Version with smooth cover and yellow longitudinal Cover: CR, black, grooved, oil and ozone resistant.
stripes available upon request.
Marking: Continuous coloured marking, white:
"SEMPERIT DOT 1/8 HL SAE J1401". Additionally:
white longitudinal stripe.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68161 0335 3,2 1/8 3,5 10,2 100 2 38 0,09 -
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FBU
Brake Hose
Application:
A flexible hose connecting the braking system
between railway carriages.
Feature:
The hoses are manufactured either to UIC 830-1/ Temperature range: -40°C / +70°C.
V:1981 or according to the technical terms of deliv Safety factor: 7 : 1
ery (TL) of the client railway companies.
Tube: NR/BR, black.
Fire resistant cover, according to DIN 5510-2:
1991. Reinforcement: Textile wrapped.
Standard/approval: Cover: CR, black, cloth impression.
UIC 830-1/V:1981. Marking: Embossed labelling according to UIC
830-1/V or the technical terms of delivery of the client
Diverse national railway norms (e.g. ÖBB, DB, etc.). railway companies.
Notice:
The hose is supplied in coils or in cut lengths to
client’s requirements.
The hose ends are honed for easy fitting, the sur
face of the cut is sealed (if required).
As the operational safety of the trains depends on
the perfect functioning of the hoses, raw materials,
manufacturing and final checks are subject to strict
controls in order to provide the high quality required
for these Semperit brake hoses.
Date: 31.08.2007
FKD-R / FKD-S
Radiator Hose
Application:
Cooling hose for combustion engines.
Feature:
Good resistance to ageing under the influence of
hot water, hot air and anti-freezing agents. Temperature range: -40°C / +100°C.
Ozone resistant. Safety factor: 2,5 : 1
Tube: EPDM, black, smooth.
Reinforcement: Polyester spiral construction.
Cover: EPDM, black, smooth, weather and ozone res
istant.
Marking: Continuous coloured marking, white:
"SEMPERIT S FKD Kühlwasser/Cooling Water id x wd
>EPDM/PES/EPDM< quarter/year".
Date: 31.08.2007
FKS-R – FKS-S
Radiator Hose
Application:
Cooling water delivery hose for combustion en
gines.
Feature:
Tube and cover are resistant to hot water and anti- Temperature range: -35°C / +100°C.
freeze agents. Safety factor: 3.15 : 1
Tube: SBR, black, smooth.
Reinforcement: Textile wrapped.
Cover: SBR, black, cloth impression.
Marking: Continuous coloured marking, white:
"SEMPERIT S FKS Kühlwasser/Cooling Water DN PN
3 bar 100°C".
FKS-R........48342 ......Rolls
FKS-S........48372 ......Piece goods (1m length)
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
483xx 2835 28,0 3,5 35,0 3 2 0,50 40
483xx 3040 30,0 1 3/16 4,0 38,0 3 2 0,55 40
483xx 3240 32,0 1 1/4 4,0 40,0 3 2 0,65 40
483xx 3540 35,0 1 3/8 4,0 43,0 3 2 0,75 40
483xx 3840 38,0 1 1/2 4,0 46,0 3 2 0,80 40
483xx 4040 40,0 4,0 48,0 3 2 0,85 40
483xx 4240 42,0 4,0 50,0 3 2 0,90 40
483xx 4545 45,0 4,5 54,0 3 2 1,05 40
483xx 4845 48,0 4,5 57,0 3 2 1,10 40
483xx 5045 50,0 4,5 59,0 3 2 1,10 40
483xx 5545 55,0 4,5 64,0 3 2 1,15 40
483xx 6050 60,0 5,0 70,0 3 2 1,40 40
483xx 6550 65,0 5,0 75,0 3 2 1,50 40
483xx 7050 70,0 5,0 80,0 3 2 1,65 40
483xx 7550 75,0 5,0 85,0 3 2 1,75 40
563xx 8050 80,0 5,0 90,0 3 2 1,80 40
563xx 9050 90,0 5,0 100,0 3 2 2,05 40
563xx 0050 100,0 5,0 110,0 3 2 2,35 40
563xx 0160 110,0 6,0 122,0 3 2 3,10 40
563xx 0260 120,0 6,0 132,0 3 2 3,35 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FKO
Oil Cooling Hose
Application:
A cooling hose for heavy duty use in diesel engines.
Feature:
Tube and cover are resistant to oil and fuel.
Temperature range: -35°C / +120°C.
Notice:
ATTENTION: It is vital to be aware of the different Safety factor: 3,15 : 1
working pressures. Tube: NBR, black, smooth.
Reinforcement: Textile wrapped.
Cover: NBR, black, cloth impression.
Marking: Continuous transfer tape, yellow:
"SEMPERIT S".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Weight Coil length
mm inches in mm in mm (max.) bar inserts approx. kg/m (max.) m
48345 1340 13,0 1/2 4,0 21,0 12 2 0,25 40
48345 1540 15,0 4,0 23,0 12 2 0,30 40
48345 1640 16,0 5/8 4,0 24,0 12 2 0,30 40
48345 2040 20,0 4,0 28,0 12 2 0,40 40
48345 2240 22,0 7/8 4,0 30,0 12 2 0,40 40
48345 2540 25,0 1 4,0 33,0 12 2 0,45 40
48345 3040 30,0 1 3/16 4,0 38,0 12 2 0,50 40
48345 3240 32,0 1 1/4 4,0 40,0 12 2 0,55 40
48345 3540 35,0 1 3/8 4,0 43,0 12 2 0,60 40
48345 3840 38,0 1 1/2 4,0 46,0 12 2 0,65 40
48345 4040 40,0 4,0 48,0 12 2 0,80 40
48345 4245 42,0 4,5 51,0 8 2 0,80 40
48345 4545 45,0 4,5 54,0 8 2 0,85 40
48345 5045 50,0 4,5 59,0 8 2 0,90 40
48345 5545 55,0 4,5 64,0 8 2 1,00 40
48345 6050 60,0 5,0 70,0 8 2 1,20 40
48345 7050 70,0 5,0 80,0 8 2 1,40 40
56345 9070 90,0 7,0 104,0 5 2 2,90 40
56345 0070 100,0 7,0 114,0 5 2 3,15 40
56345 0170 110,0 7,0 124,0 5 2 3,20 40
56345 0380 125,0 8,0 141,0 5 2 4,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FKN
Radiator Hose
Application:
Cooling hose for combustion engines with water or
air circulation.
Feature:
Good ageing resistance under the influence of hot Temperature range: -40°C / +100°C.
water, hot air as well as anti-freezing agents. Safety factor: 3 : 1
Ozone and oil resistant cover. Tube: EPDM, black, smooth.
Reinforcement: Textile spiral construction.
Cover: NBR/SBR, black, smooth, weather, ozone and
oil resistant.
Marking: Continuous coloured marking, white (cold
ambient temperature circulation) or red (hot circulation):
"SEMPERIT S FKN COOLING WATER 6 bar
Quarter/Year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68039 1636 16,2 3,5 23,2 6 2 100 0,29 50
68039 1637 16,2 3,5 23,2 6 2 100 0,29 50
68039 1836 18,0 3,5 25,0 6 2 100 0,32 50
68039 1946 19,0 4,0 27,0 6 2 114 0,39 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FKE
Radiator Hose
Application:
Cooling hose for cooling water with anti-freezing
agents.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68022 1035 10,0 3,5 17,0 6 2 190 0,25 50
68022 1335 13,0 3,5 20,0 6 2 215 0,28 50
68022 1635 16,0 3,5 22,0 6 2 240 0,36 50
68022 1835 18,0 3,5 25,0 6 2 250 0,43 50
68022 2040 20,0 4,0 28,0 6 2 260 0,50 50
68022 2545 25,0 4,5 34,0 6 2 280 0,60 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FKL
Radiator Hose
Application:
A light and very flexible cooling water hose for
combustion engines.
Suitable for suction and delivery applications.
Feature:
Temperature range: -40°C / +100°C.
Tube and cover are resistant to hot water and anti-
freeze agents. Safety factor: 3 : 1
Notice: Tube: EPDM, black, smooth.
Also available with 10 bar WP on request. Reinforcement: Textile wrapped, double steel wire
helix.
Cover: EPDM, black, square corrugated, cloth impres
sion.
Marking: None.
Date: 31.08.2007
FUB
Fuel Hose
Application:
Suitable for the delivery of unleaded fuels (EN
228:2004) and diesel oils (EN 590:2004) for
cars, trucks and tractors.
Notice: Temperature range: -40°C / +100°C, Fuel: -30°C
Suitable for fuels with a contant of methyl-alcohol of / +70°C.
max. 10% . Safety factor: 3,3 : 1
Tube: NBR, black, smooth, ozone and oil resistant.
Reinforcement: Textile spiral construction.
Cover: CR/NBR, black, smooth, ozone and oil resist
ant.
Marking: Continuous coloured marking, green:
"SEMPERIT S FUB KRAFTSTOFF/FUEL DN PN
12BAR"
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68030 0330 3,2 1/8 3,0 9,2 12 2 32 0,08 50
68030 0430 4,0 3,0 10,0 12 2 44 0,08 50
68030 0530 5,0 3/16 3,0 11,0 12 2 50 0,11 50
68030 0531 5,5 3,0 11,5 12 2 55 0,11 50
68030 0630 6,0 3,0 12,0 12 2 60 0,10 50
68030 0631 6,3 1/4 3,0 12,3 12 2 63 0,10 50
68030 0730 7,0 3,0 13,0 12 2 70 0,12 50
68030 0731 7,5 3,0 13,5 12 2 75 0,13 50
68030 0830 8,0 5/16 3,0 14,0 12 2 80 0,13 50
68030 0930 9,0 3,0 15,0 12 2 90 0,14 50
68030 0931 9,5 3/8 3,0 15,5 12 2 95 0,15 50
68030 1030 10,0 3,0 16,0 12 2 100 0,16 50
68030 1235 12,0 3,5 19,0 12 2 120 0,21 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FUB 386
Fuel Hose
Application:
Suitable for the delivery of unleaded fuels (EN
228:2004) and diesel oils (EN 590:2004) for
cars, trucks and tractors.
Suitable for the engine compartment of trucks. Temperature range: -40°C / +100°C, for a short time
Standard/approval: up to 125°C
ISO 19013-1,2:2005 Safety factor: 3,3 : 1
Notice: Tube: NBR, black, smooth, ozone and oil resistant.
Can be used for fuels with a methyl-alcohol content Reinforcement: Textile spiral construction.
of up to 10%. Cover: CR/NBR, black, smooth, resistant to ozone, oil
Delivered coil can consist of several hose lengths. and weather.
Marking: Continuous coloured marking, green:
"SEMPERIT S FUB 386 KRAFTSTOFF/FUEL PN 12
BAR DN quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68031 0430 4,0 3,0 10,0 12 2 48 0,09 -
68031 0527 5,0 3/16 2,7 10,5 12 2 60 0,10 -
68031 0630 6,0 1/4 3,0 12,0 12 2 72 0,13 -
68031 0830 8,0 5/16 3,0 14,0 12 2 96 0,17 -
68031 0932 9,5 3/8 3,2 16,0 12 2 114 0,19 -
68031 1235 12,0 3,5 19,0 12 2 144 0,26 -
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FUHT
Fuel Hose
Application:
Suitable for the delivery of unleaded fuels (EN
228:2004) and diesel oils (EN 590:2004) for the
engine compartment of motor vehicles.
Suitable for ambient temperature of up to 110°C. Temperature range: -40°C / +110°C, Fuel: -30°C /
Feature: +70°C.
Excellent resistance to weather and temperature. Safety factor: 3,3 : 1
Tube: NBR, black, smooth, oil resistant.
Notice:
Can be used for fuels with a methyl-alcohol content Reinforcement: Textile spiral construction.
of up to 10%. Cover: CSM, black, smooth, resistant to ozone, oil and
weather.
Marking: Continuous coloured marking, white:
"SEMPERIT S FUHT Kraftstoff/Fuel PN 12 BAR DN
quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68093 0330 3,2 1/8 3,0 9,2 12 2 32 0,08 50
68093 0331 3,5 3,0 9,5 12 2 35 0,08 50
68093 0430 4,0 3,0 10,0 12 2 40 0,08 50
68093 0431 4,5 3,0 10,5 12 2 45 0,09 50
68093 0530 5,0 3/16 3,0 11,0 12 2 50 0,10 50
68093 0531 5,5 3,0 11,5 12 2 55 0,10 50
68093 0630 6,0 3,0 12,0 12 2 60 0,10 50
68093 0631 6,3 1/4 3,0 12,3 12 2 63 0,10 50
68093 0730 7,0 3,0 13,0 12 2 70 0,12 50
68093 0731 7,5 3,0 13,5 12 2 75 0,12 50
68093 0830 8,0 5/16 3,0 14,0 12 2 80 0,13 50
68093 0930 9,0 3,0 15,0 12 2 90 0,14 50
68093 1030 10,0 3,0 16,0 12 2 100 0,15 50
68093 1130 11,0 3,0 17,0 12 2 110 0,16 50
68093 1235 12,0 3,5 19,0 12 2 120 0,21 50
68093 1335 13,0 3,5 20,0 12 2 130 0,24 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 03.02.2010
FMO
Fuel Hose
Application:
Delivery hose for unleaded fuels (EN228:2004).
Can be used for mineral oil-based industrial oils,
diesel oils (EN590:2004), bio diesel (RME) and
glycine-based coolants.
Temperature range: -30°C / +100°C, for a short time
A universal hose for use with vehicles, buses and up to 120°C.
tractors.
Safety factor: 4 : 1
Feature:
Tube: NBR, black, smooth.
Highly resistant to temperature.
Reinforcement: Textile wrapped.
Notice:
Cover: CR, black, oil and weather resistant, cloth im
Two pressure stages available: 10 bar or 15 bar. pression.
Marking: Continuous transfer tape, yellow:
"SEMPERIT S FMO Kraftstoff/Fuel D" as well as em
bossed labelling "PN 10/15 bar DN quarter/year".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48100 1340 13,0 1/2 4,0 21,0 10 2 41 0,25 40
48100 1640 16,0 5/8 4,0 24,0 10 2 83 0,30 40
48100 1840 18,0 4,0 26,0 10 2 97 0,32 40
48100 2040 20,0 4,0 28,0 10 2 116 0,35 40
48100 2240 22,0 7/8 4,0 30,0 10 2 135 0,35 40
48100 2550 25,0 1 5,0 35,0 10 2 158 0,38 40
48100 2850 28,0 5,0 38,0 10 2 181 0,54 40
48100 3250 32,0 1 1/4 5,0 42,0 10 2 204 0,59 40
48100 3550 35,0 5,0 45,0 10 2 227 0,66 40
48100 4050 40,0 5,0 50,0 10 2 275 0,74 40
48100 5060 50,0 6,0 62,0 10 2 350 0,81 40
48103 1660 16,0 5/8 6,0 28,0 15 4 55 0,45 40
48103 1860 18,0 6,0 30,0 15 4 70 0,50 40
48103 2060 20,0 6,0 32,0 15 4 80 0,55 40
48103 2260 22,0 7/8 6,0 34,0 15 4 90 0,58 40
48103 2560 25,0 1 6,0 37,0 15 4 95 0,65 40
48103 2860 28,0 6,0 40,0 15 4 110 0,70 40
48103 3260 32,0 1 1/4 6,0 44,0 15 4 135 0,78 40
48103 3560 35,0 6,0 47,0 15 4 150 0,85 40
48103 4060 40,0 6,0 52,0 15 4 180 0,95 40
48103 5060 50,0 6,0 62,0 15 4 220 1,15 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FMS
Fuel Hose
Application:
Suction and delivery hose for unleaded fuels (EN
228:2004). Can be used for mineral oil-based in
dustrial oils, diesel oils (EN590:2004), bio diesel
and glycine-based coolants.
Temperature range: -30°C / +100°C, for a short time
A universal hose for use with vehicles, buses and up to 120°C.
tractors.
Safety factor: 4 : 1
Feature:
Tube: NBR, black, smooth.
Highly resistant to temperature.
Reinforcement: Textile wrapped, zinc plated steel wire
Suitable for medium duty suction applications. helix.
Notice: Cover: CR, black, oil and weather resistant, cloth im
ATTENTION: Two pressure stages available: 10 pression.
bar or 15 bar. Marking: Continuous transfer tape, yellow:
"SEMPERIT S FMS Kraftstoff/Fuel SD" as well as em
bossed labelling "PN .. bar DN quarter/year".
Date: 31.08.2007
FPB
Propane Butane Hose
Application:
Hose for transporting propane- butane gas at low
pressure in vehicles.
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
68032 0630 6,0 3,0 12,0 4,5 2 40 0,11 50
68032 1235 12,0 3,5 19,0 4,5 2 70 0,23 50
68032 1335 13,0 1/2 3,5 20,0 4,5 2 80 0,25 50
68032 1640 16,0 5/8 4,0 24,0 4,5 2 100 0,34 50
68032 1945 19,0 3/4 4,5 28,0 4,5 2 120 0,40 50
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR
for operational safety. For safety reasons, hoses must be replaced in the event of damage, 7620:2005(E). The individual conditions of use affect the use of each product. They therefore
especially if the cover is damaged. All products must be stored and maintained according to only ensure the safety that can be expected assuming that the specifications in our written
our storage, care and maintenance instructions, and according to DIN 7716:1982. product information, the specifications regarding resistance to chemicals and our cleaning pro
We are constantly developing and improving our products for our customers. For the latest cedures are all complied with. We cannot guarantee this level of safety in the event of
product information, please visit our website www.semperflex.com regularly or contact one of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permit
our specialist dealers or Semperit application engineers. Contracts are agreed according to ted. Unless specified otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 07.06.2010
FAL
Exhaust Gas Hose
Application:
A light and very flexible waste gas hose without
helix.
Especially developed for car repair workshops with
under floor exhaust gas systems.
Temperature range: -40°C / +120°C, for a short time
Feature: up to +150°C.
Resistant to waste gases and high temperatures.
Tube: EPDM, black, show square corrugated.
Hose can be driven over.
Reinforcement: None.
Cover: EPDM, black, show square corrugated, cloth
impression.
Marking: None.
Date: 31.08.2007
FHKS
Hot Air Compressor Hose
Application:
A compressor hose for use with silo vehicles as a
connecting hose between the discharge com
pressor and the silo.
Feature: Temperature range: -40°C / +160°C.
Long service life due to heat resistant rubber com
pounds. Safety factor: 6 : 1
Tube: EPDM, black, smooth, resistant to hot air.
Two steel wire braids provides good cross-sectional
strength, kink resistance and high burst pressures. Reinforcement: Steel wire braided.
Cover: EPDM, black, abrasion resistant, weather resist
ant, cloth impression.
Marking: Continuous embossed labelling, coloured:
"SEMPERIT S FHKS Heißluftkompressor/Hot Air
Blower 160°C PN 25 bar".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
48401 5180 51,0 2 8,0 67,0 25 2 250 2,40 20
48401 6080 60,0 8,0 76,0 25 2 320 3,10 20
48401 6580 65,0 8,0 81,0 25 2 350 3,40 20
48401 7580 75,0 8,0 91,0 25 2 450 4,00 20
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FHKL
Hot Air Compressor Hose
Application:
A compressor hose for use with silo vehicles as a
connecting hose between the discharge com
pressor and the silo.
Feature:
The steel wire helix allows a higher flexibility and Temperature range: -40°C / +160°C, for a short time
smaller bending radii than with FHKS. up to +190°C.
Notice: Safety factor: 3 : 1
Upon request also available with a white rubber Tube: EPDM, black, smooth, high temperature variant.
tube for granules. Reinforcement: Textile wrapped, double steel wire
ATTENTION: It is vital to observe the different work helix.
ing pressures of the application! Cover: EPDM, black, slightly corrugated, resistant to
heat, ozone and weather, cloth impression.
Marking: Continuous transfer tape, yellow:
"SEMPERIT S FHKL Heissluftkompressor/Hot Air
Blower 160°C".
Article number Internal-Ø in Wall width External-Ø Work. pressure Number of Bending radius Weight Coil length
mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m
56407 5150 51,0 2 5,0 61,0 10 2 150 1,50 40
56407 6355 63,0 2 1/2 5,5 74,0 10 2 200 1,80 40
56407 7660 76,0 3 6,0 88,0 8 2 300 2,14 40
56407 9060 90,0 6,0 102,0 7 2 360 2,70 40
56407 1060 102,0 4 6,0 114,0 7 2 450 3,00 40
Please note: General information about our range of products can be found in the appendix Important notice: This catalogue has been prepared with the greatest care in order to provide
to this catalogue. Before using with new or untested media, or before using in applications you with all the information you need. The information contained herein incorporates the latest
that are not covered in the product information, written advice must first be obtained from a state-of-the-art technology, and is the result of trials and tests carried out over many years, or
specialist dealer or a Semperit application engineer. All products must be inspected regularly conforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005
for operational safety. For safety reasons, hoses must be replaced in the event of damage, es (E). The individual conditions of use affect the use of each product. They therefore only ensure
pecially if the cover is damaged. All products must be stored and maintained according to the safety that can be expected assuming that the specifications in our written product informa
our storage, care and maintenance instructions, and according to DIN 7716:1982. tion, the specifications regarding resistance to chemicals and our cleaning procedures are all
We are constantly developing and improving our products for our customers. For the latest complied with. We cannot guarantee this level of safety in the event of improper handling, e.
product information, please visit our website www.semperflex.com regularly or contact one of g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specified
our specialist dealers or Semperit application engineers. Contracts are agreed according to otherwise, all hoses are manufactured to EN ISO 1307:2006.
our general terms and conditions. Subject to change without notice.
Date: 31.08.2007
FSY
Marine Toilet Hose
Application:
The plumbing component for boat owners who ex
pect the highest quality.
Feature:
Due to the use of a white cover the hose does not Temperature range: -35°C / +70°C.
leave abrasion marks.
Safety factor: 3,15 : 1
Odourless. Tube: SBR, black, smooth.
Flexible and therefore suitable for fitting at small Reinforcement: Textile wrapped, steel wire helix.
bending radii.
Cover: SBR/EPDM, white, sea water resistant, cloth im
Resistant to waste water and sea water. pression.
Marking: Continuous transfer tape, black:
"SEMPERIT S FSY Sanitary".
Date: 31.08.2007
TME / SF 3000
Tanker S & D Hose
Application:
Compact suction and delivery hose for filling and
discharging tanks, petrol tankers and ships with un
leaded fuels (EN 28:2004) with oxygen content
limited according to EEC 85/536 and with an aro
matic content of components 50% max.
Temperature range: -30°C / +90°C.
Suitable for industrial oils, diesel oils (EN
590:2004), fuel oils (DIN 51 603 parts 1 - 5) and Safety factor: 3 : 1
mineral oil-based hydraulic oils. Tube: NBR, black, smooth, electrically conductive.
Standard/approval: Reinforcement: Textile braided (ID > 2", wrapped), 2
EN ISO 7840:2004 A2. crossed copper wires, zinc plated steel wire helix.
Notice: Cover: SBR/CR, black, abrasion and weather resistant,
cloth impression.
Approved by Lloyd´s Register of Shipping as mar
ine exhaust hose and fuel hose. Marking: Continuous ink transfer tape, blue:
"SEMPERIT S TME/SF 3000 Mineralöl/Oil SD PN
10 bar, ISO 7840:A2 Lloyd’s Register year".
Date: 31.08.2007
SIGMA BULK TRANSPORT SYSTEM
A M E M B E R O F T H E S E M P E R I T- G R O U P
SEMPERIT – SUCCESSFUL ALL OVER THE WORLD
The Austrian based Semperit AG is one of the world's Gained from our company's long tradition, our exper-
leading companies active in developing, manufacturing tise in the production and use of rubber and plastic
and marketing high quality rubber and plastic products. products, together with our commitment to maintain the
Founded in 1824, the company is one of the Europe's highest quality standards in every area, as well as our
oldest rubber manufacturers. dedication to customer service all guarantee a contin-
ued strengthening of our position as a global leader.
Our Sempermed, Semperflex, Sempertrans and provide us with continually improving quality and pro-
Semperform divisions offer our customers a compre- ducts highly adapted for today's markets.
hensive and innovative assortment of high quality pro-
ducts and solutions, from medical and industrial gloves, Businesses and industries of all sizes have a wide
to hydraulic, industrial hoses and rubber sheet, indus- range of hose requirements. Whether it’s in the chemi-
trial mouldings, as well as conveyor belts. cal industry, the building industry, the food industry or
in recycling, Semperflex, your partner for hose solu-
Semperflex industrial hose division develops, manu- tions, offers the right product for you for almost every
factures and markets industrial hoses throughout the imaginable application.
world. These high quality products are produced in
our Semperflex plants in Austria, the Czech Republic
and Italy, based on knowledge gained by many years
of experience. Significant ongoing investments in R&D
All business transactions are exclusively carried out in accordance with our This catalogue is the property of Semperit Technische Produkte GmbH & Co KG
general terms of business. and represents the most current version.
Subject to misprints and errors.
Permission to reprint or copy this catalogue (in whole or in part) must be The hoses shown in this literature are schematic diagrams only.
obtained in writing from Semperit Technische Produkte GmbH & Co KG. Print date: April 2005, 1st edition
2
SIGMA-BULK TRANSPORT SYSTEM
SIGMA material handling hose is a flexible modular
system developed for easy integration into existing
installations.
3
SIGMA – FS 3310 SIGMA – FS 3320
HYDRAULIC TRANSPORT HYDRAULIC AND PNEUMATIC TRANSPORT
OF ABRASIVE MATERIAL OF ABRASIVE MATERIAL
Application: Application:
A suction and delivery hose for the hydraulic transport A suction and delivery hose for conveying abrasive
of abrasive materials, such as gypsum, ashes, bauxite, materials, such as cement, sand, phosphates, quartz,
corundum, dolomite, ores, feldspar, waste glass, wood dolomite, glass splinters, dry mixed animal food,
chips, industrial waste, coal, metallic powder, etc. grain, bark, wood shavings, etc. pneumatically and
hydraulically.
4
SIGMA – FS 3330 SIGMA – FS 3340
TRANSPORT OF SOLID MEDIA AND PNEUMATIC AND HYDRAULIC TRANSPORT
CORROSIVE LIQUIDS OF SOLID AND DUST-LIKE FOOD STUFFS
Application: Application:
A suction and delivery hose for conveying solid A suction and delivery hose for conveying solid and
substances contained in liquids, especially corrosive dust-like food stuffs, such as animal feed, silo products,
substances such as acids and bases. grain, light coloured plastic granulates and oil-laden
substances, etc., pneumatically and hydraulically.
SIGMA coupling
Black cover, CR, resistant to abrasion, SIGMA Impact resistant aluminium,
Intermediate weather and sea water (electrically A seal with 2 half shells, inner corrugation fits to
layer conductive) resistant to oil reinforcement tissue hose surface
5
BASIC ELEMENTS ELEMENTS
F F k d
d
Ø inside L P* dA S R min M F DIN k DIN z DIN x h DIN F ASA k ASA z ASA x h ASA d M
[mm] [inch] [m] [O/---] [mm] [mm] [m] [kg/m] [mm] [mm] [Pc] [mm] [inch] [inch] [Pc] [inch] [mm] [kg]
90,0 3 1/2 40 O 133 12 0,50 9,6 220 180 8 x 18 7 8 1/2 8 x 3/4 136 0,65
127,0 5 20 O 162 7 0,65 12,4 250 210 8 x 18 8 1/2 10 8 x 7/8 166 0,80
152,0 6 20 O 188 7 0,75 14,3 285 240 8 x 22 9 1/2 11 8 x 7/8 192 0,90
203,0 8 12 --- 241 8,5 1,75 18,8 340 295 8 x 22 11 3/4 13 1/2 8 x 7/8 245 1,05
254,0 10 12 --- 292 8,5 2,00 22,6 395 350 12 x 22 14 1/4 16 12 x 1 296 1,25
355,0 14 12 --- 409 12 3,00 40,8 505 460 16 x 22 18 3/4 21 16 x 11/8 411 1,70
405,0 16 12 --- 458 11 3,50 47 565 515 16 x 26 21 1/4 23 1/2 16 x 11/8 461 1,85
Status: April 2005 Additional dimensions available on request *O = coiled/ --- = straight
6
5 REDUCER RE 3391 RE 3397 8 FLANGE ADAPTATER RING FA 3394
zD x hD t
S z xh zD x bD
D D zd x bd
FD kD D d kd Fd
F kD D d kd
L
k
s1
d
9 SHUT-OFF VALVE AO 3396 Control media connection
(compressed air or water).
R
C
45° H
Vol. Vol.
L
d
F
k
S Vol.
A
flow free flow shut-off
R zxh
A Four-part squeeze valve simple but robust construction.
Control media compressed air or water squeezes the cylindrical,
B zxh
elastic sleeve, flow is shut-off or reduced.
4 AD 3392 5 RE 3391
6 KR 3390 7 AB 3393 8 FA 3394 9 AO 3396
AD 3398 RE 3397
L S L d D R A B C S L H A S d D L M V
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] [dm3]
380 51 63,5 160 160 82 175 6,6 350 276 178 6 51 63,5 167 9,0 0,8
380 63,5 76 190 186 108 205 6,3 350 276 178 6 63,5 76 184 11,5 1,1
82
102 90
380 76 238 228 132 254 9,2 400 314 206 9 76 226 16,0 2,2
127 102
380 6 238 228 132 254 6,2 400 314 206 6
380 14 380 178 254 600 542 313 615 14,4 540 413 305 14 203 254 559 94,0 32,0
380 15 380 203 305 720 646 373 735 15,1 640 490 362 15 245 305
340
380 17 380 254 355 860 767 443 875 17,3 720 546 418 17 305 355
388
380 17 305 980 871 503 995 16,9 820 617 489 17 355 405
380 16 1140 1009 583 1155 16,1 950 718 560 16
7
SIGMA SPECIAL PRODUCTS
Our large assortment of standard hoses can be used requests with regard to hose ends or fittings, please
for numerous applications. If, however, you do not find contact our sales department.
the right hose in this catalogue, or if you have special
HOSE ENDS
1. Capped ends: 3. Enlarged ends:
The hose end is covered by a rubber seal to protect This steel-free design has an enlarged end to match
the reinforcement from humidity, dirt and corrosion. the outside diameter of the nipple.
2. Spiral-free couplings: 4. Conical ends:
The steel wire helix stops before the end of the hose The hose end is manufactured with a conical nozzle.
to facilitate coupling. Additional textile reinforcement
guarantees adequate strength.
Beaded ends
The standard coupling KU 3311 is not suitable for applications with chemically aggres-
sive substances. Plastic coated couplings (protection against corrosion) are available on
request. Standard color RAL 5012/1 Blue. Additional colours available on request.
8
ASSEMBLY INSTRUCTION
1 2
1 Measure and mark the hose at the place where you 2 Cut the hose at the mark with a sharp, slightly wet
want to cut it with a silver point pen. Use a sheet metal cutting tool (e.g. a knife or a plain saw) up to the steel
sleeve or put the half shells of the coupling provisionally wire helix.
on the hose in order to mark it straight.
3 4
3 Pull the two halves of the hose apart. The steel wire 4 Put both half shells of the coupling on the hose. The
helix is torn out of the cut. Cut it with a hack-saw or corrugation inside of the coupling must lie exactly on the
cable cutter directly at the surface of the cut, the spiral corrugation of the hose. Use a screw clamp as an
must not overtop the hose. assistance.
The end of the hose must overtop the flange by
3 to 5mm.
5 6
5 Screw both half shells together up to the point where 6 Put the seal concentrically between both flange cou-
the inside of the hose shows slightly corrugated deforma- plings. Screw the flanges tightly together. The impervious-
tions. There must remain a small gap between the half ness of the system is only maintained by pressing both
shells, equally large on both sides. The service life of the hose ends against the seal.
system may be reduced significantly if the coupling is
installed too tight or too loose.
9
SERVICE, MAINTENANCE
AND STORAGE
Hoses are subject to a limited service life and the user The following contains general instructions for properly
must be alert to warnings of a pending hose failure, storing hoses in accordance with the standards laid
especially when the conditions under which the hose is down in DIN 7716: 1982 "Rubber products; require-
used require a high working pressure and/or the hose ments for storage, cleaning and maintenance", Para-
is used to convey dangerous substances. graph 3. Improper storage can significantly shorten the
service life of the hose.
Safety warning: If the manufacturer's recommenda-
tions regarding service, maintenance and storage Storage room: The storage room should be cool, dry,
of the hose in question are not followed, this may free from dust and moderately well ventilated. Storage
lead to the hose's failure to function correctly, which out in the open that does not protect against the
in turn may lead to damage of property or serious weather is not suitable.
bodily injury.
Temperature: Rubber products should not be stored
General inspection below -10° C or above +15° C, whereby this limit can
Inspections and hydrostatic tests are to be carried out be exceeded up to +25° C.
at regular intervals in order to monitor hose suitability Higher temperatures are only allowable for very short
for continued use. A visual inspection of the hose for periods of time.
loose covers, kinks, dents or soft spots must be carried
out for the purposes of determining whether reinforce- Heating: In heated storage rooms rubber products must
ments have either broken or shifted out of position. be protected from heat sources. The distance between
the heat source and the stored materials
Couplings or other fittings must be carefully inspected must be at least one meter.
for signs that they are becoming detached from the
hose and must be replaced immediately if necessary. Humidity: Storage in humid storage rooms should be
avoided. It is important to make sure that condensa-
Storage tion does not form. Best is a relative air humidity not
Storing rubber hoses can be influenced by temperature, exceeding 65° C.
air humidity, ozone, daylight, oil solvents, corrosive
liquids and vapor, insects, rodents and radioactive Lighting: Rubber products should be protected from
materials etc. light, especially from direct sunlight and strong artificial
light with a high quantity of UV rays. The windows of
Proper storage of the hoses depends primarily on their the storage rooms are, for this reason, to be covered
size (diameter and length), the quantity to be stored with a red or orange (but never blue) protective coat of
and the packaging materials used. Hoses must not be paint. Using normal light bulbs for lighting is preferable.
stacked or piled up in such a way so that the stack
weight causes the hoses on the bottom to become Ozone: As ozone is particularly harmful, storage rooms
demformed. As rubber hoses differ widely in dimen- must not contain any ozone generating equipment,
sion, weight and length, no general recommendations such as electric motors or other kinds of equipment
can be given in this sense. A thin-walled hose can which could generate a spark or other kind of electrical
withstand less strain than a thick-walled hose or a hose charge. Combustible gasses and vapours which could
reinforced with a steel wire double helix. Hoses that generate ozone by way of photochemical processes
are delivered coiled must be stored horizontally. should be removed.
Whenever possible, hoses should be stored in their Finally, all rubber products should be stored according
original packaging, especially if these containers are to the "first in, first out" principle, as an unusually long
wooden crates or plastic protection foils. This kind of storage period can deteriorate the physical properties
packaging also protects the hose from sunlight. of rubber products even under the best of conditions.
10
HANDLING GUIDELINES FOR THE SIGMA
MATERIALS HANDLING HOSE SYSTEM
In addition to the general handling guidelines for rubber when using SIGMA materials handling hose system due
hoses, it is important to observe the following points to their large physical dimensions and measurements:
• In principle, SIGMA hoses are to be handled on may objects be placed on the SIGMA hose;
pallets regardless of delivery method (coiled, up to otherwise embedded wire helixes will be in danger
DN 152, straight, above that) so as to prevent any of becoming permanently deformed. Only SIGMA
damage to the hose. hoses may be stored on top of each other.
• When delivered straight, it is recommended that the • It is very important to note that pressure sensitivity
hoses be handled at least by two fork lifts. increases with the increasing nominal diameter of the
hose.
• Hoisting eyes must be used if individual hoses or
hose bundles must be moved by fork lifts without the • Due to the high mass of the SIGMA materials
use of pallets. handling hose system, it is recommended that
hoisting equipment and the like be used when
• When transporting the hoses they must be sufficiently handling the hoses for ergonomic reasons.
secured every time so as to prevent any damage
during transport. • All metallic elements of the SIGMA system have to
be protected against weather and sun when they are
• SIGMA hoses must not be dragged across the stored before use.
ground or over sharp-edged objects.
Important Notes. This catalogue has been carefully prepared to provide our Danger! Before using with new or untested media or for applications that are not
customers with comprehensive advice. The information contained herein is the included in the product information, written information must be obtained from a
result of many years of tests and trials or based on the endurance specifications specialist dealer or a Semperit applications engineer. All hoses must be regularly
defined by ISO 7620-1986(E) for the specified media. The individual operating checked for operating safety. In the case of damage, in particular to the hose
conditions affect the use of every product. Products can therefore only offer the cover, hoses must be replaced for safety reasons.
safety that can be expected on the basis of the information provided by us in the Subject to change, without notice.
written product information. In the event of improper treatment such as crushing,
tearing, stretching, and loading with impermissible media this safety cannot be Subject to misprints and errors.
expected. All hoses are manufactured in conformity with EN ISO 1307:1995
unless stated otherwise.
11
A
SEMPERIT AG HOLDING
A-1030 Wien, Modecenterstraße 22
Postfach 201
Tel.: +43-1-79 777-0
Telefax: +43-1-79 777-600
Internet: www.semperit.at
BRANCHES
H
SEMPERMED
MAGYARORSZÁG KFT.
H-1025 Budapest
Jòzsefhegyi út. 28-30 E/1
Tél.: +36 1 335 7111
Telefax: +36 1 335 7112
E-mail: semperit.office@axelero.hu
N
CARL FUGLESANG A/S
CZ I N-1306 Baerum Ptrm.
SEMPERFLEX OPTIMIT, S.R.O. ROITER S.P.A P.O.Box 25 - Holmaveien 21
CZ-742 35 Odry I- 45100 Rovigo, Via A. Grandi 5 Tel.: +47 67176850
Vitkovská c.p. 391/29 Tel.: +39-0425-410 680 Telefax: +47 67176801
Tel.: +420-556-763-111 Telefax: +39-0425-410 911 E-mail: carl@fuglesang.no
Telefax: +420-556-763-199 E-mail: semperit@roiter.com
E-mail: sales@semperflex.cz Internet: www.roiter.it SF
PR-KUMI OY
D E SF-00810 Helsinki
SEMPERIT TECHNISCHE PRODUKTE GMBH MANGUERAS TECNICAS ROITER S.A. Petter Wetterin Tie 1A
D-58285 Gevelsberg E- 08620 Sant Vicenc dels Horts, Tel.: +358-9-759 426-0
Mühlenstraße 25 Pol. Ind. Moli dels Frares, Telefax: +358-9-759 426 19
Postfach 2040 Calle A 13-15 E-mail: pr-kumi.oy@kolumbus.fi
Tel.: +49-2332-70 09-0 Tel.: +34-93-656 8060
Telefax: +49-2332-70 09-22 Telefax: +34-93-656 7026 DK
E-mail: zentrale@semperit.de E-mail: roiter@roiter.es BRDR. STRICKER-NIELSEN A/S
Internet: www.semperit.de DK-2950 Vedbaek
S Skelstedet 10A – Postbox 54
F SEMPERIT TEKNISKA PRODUKTER AB Tel.: +45-45-89 15 55
SEMPERIT FRANCE S.A.R.L. SE-12738 Skärholmen, Telefax: +45-45-89 44 15
F - 95812 Argenteuil Cedex Sätra Torg. 14 E-mail: michael@strini.com
2 Place Aristide Briand Tel.: +46-8-88 04 20
Tel +33 1 30 25 87 25 Telefax: +46-8-88 52 28 SIN
Telefax +33 1 34 11 32 11 E-mail: info@semperit.se SEMPERIT INDUSTRIAL PRODUCTS
E-mail: semperit.ventes@semperit.fr SINGAPORE PTE LTD.
USA & CANADA 3791 Jalan Bukit Merah
GB SEMPERIT INDUSTRIAL PRODUCTS INC. 05-22 E-centre @ Redhill
SEMPERIT INDUSTRIAL PRODUCTS LTD. Fair Lawn, NJ 07410-2814 Singapore 159 471
Reading, Berkshire RG2 OGT 17-01 Pollitt Drive Tel: +65 6275 4690
Unit B 6, Worton Drive Tel.: +1-201-797-7794 Telefax: +65 6275 4670
Tel.: +44-118-921 48 01 Telefax: +1-201-797-3899 E-mail: semperit@signet.com.sg
Telefax: +44-118-931 45 47 E-mail: b.shaw@semperit-usa.com
E-mail: hosingsales@semperit.co.uk E-mail: canada@semperit-usa.com
FS 3310
SIGMA® Feed System
Application:
A suction and delivery hose for the hydraulic trans
port of abrasive materials, such as gypsum, ash,
bauxite, corundum, dolomite, ores, feldspar, waste
glass, wood chips, industrial waste, coal, metal dust,
etc.
Temperature range: -35°C / +70°C.
Feature:
Safety factor: 3,2 : 1
The entire feed system is very easy to assemble due
to a specially designed coupling system. Tube: NR, light tone, wear resistant and elastic, electric
ally isolating.
Modular construction allows for an extremely flex
ible hose. Reinforcement: Textile wrapped, zinc plated steel wire
helix.
External, segmented coupling system allows easy
replacement of hose. Couplings can normally be re Cover: CR, black, corrugated, electrically conductive,
used. resistant to abrasion, oil, weather and sea water, cloth
impression.
Notice:
Marking: Continuous transfer tape, red:
The SIGMA® feed system is a complete line system "SEMPERIT S Sigma® FS 3310".
that contains all the necessary fittings (flanges,
clamps, gaskets, reducers, elbow fittings, branches,
adaptors, shut-off valves, etc.).
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit.
ATTENTION: Please see the special handling and
storage guidelines for our SIGMA® system.
Date: 05.05.2009
FS 3320
SIGMA® Feed System
Application:
A suction and delivery hose for the pneumatic and
hydraulic conveying of abrasive materials, such as
cement, sand, phosphates, quartz, dolomite, waste
glass, dry mixed animal feed, grain, bark, wood
shavings, etc.
Temperature range: -35°C / +70°C.
Feature:
The entire feed system is very easy to assemble due Safety factor: 3,2 : 1
to a specially designed coupling system. Tube: NR/BR/SBR, black, antistatic, abrasion-resistant.
Modular construction allows for an extremely flex Reinforcement: Textile wrapped, zinc plated steel wire
ible hose. helix.
Cover: CR, black, corrugated, electrically conductive,
External, segmented coupling system allows easy resistant to abrasion, oil, weather and sea water, cloth
replacement of hose. Couplings can normally be impression.
reused.
Marking: Continuous transfer tape, blue:
Notice: "SEMPERIT S Sigma® FS 3320".
The Sigma® feed system is a complete line system
that contains all the necessary fittings (flanges,
clamps, gaskets, reducers, elbow fittings, branches,
adaptors, shut-off valves, etc.).
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit.
ATTENTION: Please see the special handling and
storage guidelines for our Sigma® system.
Date: 21.12.2009
FS 3330
SIGMA® Feed System
Application:
A suction and delivery hose for the hydraulic con
veying of solid corrosive substances contained in li
quids, especially corrosive substances such as acids
and alkalis.
Feature: Temperature range: -35°C / +95°C.
The entire feed system is very easy to assemble due Safety factor: 3,2 : 1
to a specially designed coupling system.
Tube: CSM, light tone, acid resistant, electrically isolat
Modular construction allows for an extremely flex ing.
ible hose.
Reinforcement: Textile wrapped, zinc plated steel wire
External, segmented coupling system allows easy helix.
replacement of hose. Couplings can normally be re
used. Cover: CR, black, corrugated, electrically conductive,
resistant to abrasion, oil, weather and sea water, cloth
Notice: impression.
The SIGMA® feed system is a complete line system Marking: Continuous transfer tape, green:
that contains all the necessary fittings (flanges, "SEMPERIT S Sigma® FS 3330".
clamps, gaskets, reducers, elbow fittings, branches,
adaptors, shut-off valves, etc.).
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit.
ATTENTION: Please see the special handling and
storage guidelines for our SIGMA® system.
Date: 05.05.2009
FS 3340
SIGMA® Feed System
Application:
A suction and delivery hose for conveying (pneu
matically and hydraulically) solid and dusty food
stuffs, such as animal feed, silo products, grain, light
coloured plastic granulates and oil-laden sub
stances, etc.,
Temperature range: -35°C / +80°C.
Feature:
Safety factor: 3,2 : 1
The entire feed system is very easy to assemble due
to a specially designed coupling system. Tube: NBR, white, abrasion resistant, food quality, anti
Modular construction allows for an extremely flex static.
ible hose. Reinforcement: Textile wrapped, zinc plated steel wire
External, segmented coupling system allows easy helix.
replacement of hose. Couplings can normally be re Cover: CR, black, corrugated, electrically conductive,
used. resistant to abrasion, oil, weather and sea water, cloth
Standard/approval: impression.
BfR (former BgVV) XXI Kat.4. Marking: Continuous transfer tape, white:
"SEMPERIT S Sigma® FS 3340".
Notice:
The SIGMA® feed system is a complete line system
that contains all the necessary fittings (flanges,
clamps, gaskets, reducers, elbow fittings, branches,
adaptors, shut-off valves, etc.).
ATTENTION: Please refer to the Semperit resist
ance list or, in case of doubt, contact Semperit.
ATTENTION: Please see the special handling and
storage guidelines for our SIGMA® system.
Date: 05.05.2009