Beruflich Dokumente
Kultur Dokumente
41. Elastic nut is a locking device that has 47. The spindle of bench vises are usually provided with
A. One small nut is tightened over main nut and A. Buttress threads
main nut tightened against smaller one B. Square threads
loosening, creating friction jamming C. Acme threads
B. A slot is cut partly in middle of nut partly in D. V-threads
middle of tightening screw
C. Hard fiber or nylon cotter is recessed in the nut 48. Any device used to connect or join more components
and becomes threaded as the nut is screwed on
the on the bolt causing a tight grip A. Bolt
D. Through slots are made at top and a cotter pin is B. Screw
passed through this and a hole in the bolt and C. Fastener
cotter pin splitted and bent in reverse direction at D. None of the above
other end
49. When the threads are of opposite hand, the driven
42. Foundation bolts of specified size should be used and screw moves rapidly is known as
surrounded by a pipe sleeve with an inside diameter of at
least ______ times the diameter of the anchor bolt A. Bearing screw
B. Compound screw
A. 1 C. Differential screw
B. 2 D. Set screw
C. 3
D. 4 50. The threaded length is about ________ times the
diameter
43. Foundation bolts should be at least ______ times the
diameter of the anchor bolt A. 1.26
B. 1.5
A. 12 C. 1.8
B. 14 D. 12.0
C. 16
D. 18
A. 10
B. 12
C. 14
D. 16
A. 10
B. 20
C. 30
D. 40
1. D Crest
2. D taper thread
3. B Chamfer
4. D Flank
5. C Basic profile of thread
6. B root
7. B 5/8 inch
8. A Angle of thread
9. B Depth of engagement
10. A screw thread
11. A major diameter
12. A square thread
13. B UNC
14. A Stud bolt
15. D Torque wrench
16. A Tapping tap
17. B carriage bolt
18. C Tap
19. A Stud bolt
20. D Major diameter
21. C Pitch
22. A UNC
23. C UNF
24. B UNEF
25. D 8UN
26. A Bolt
27. B Screw
28. B Machine bolt
29. A Coupling bolt
30. D Stud bolt
31. A Carriage bolt
32. C Stove bolt
33. A Lag screw
34. B 1.5D
35. D dowel pins
36. C Lock washer
37. A major diameter
38. B left hand threads on one end and right hand
threads on the other end
39. A equal to diameter of bolt
40. C root
41. C hard fiber or nylon cotter is recessed in the
nut and becomes threaded as a nut is screwed on
the bolt causing a tight grip
42. C 3
43. D 18
44. B 12
45. C 30
46. A acme
47. C acme threads
48. C Fastener
49. B Compound screw
50. B 1.5