Beruflich Dokumente
Kultur Dokumente
a) rerating a vessel
b) operating a vessel
c) replacing a vessel head
d) internally inspecting a vessel
b)
2. Which of the following activities is not included in the scope of API 510?
c)
a) heat exchanger
b) safety relief device
c) distillation column
d) process heater (furnace)
d)
b)
d)
6. API 510 takes affect:
e)
a) API 510
b) ASME Section VIII
c) ASME Section VIII or the construction code
d) the construction code
c)
c)
9. During a vessel repair, if there is a conflict between the requirements of API 510
and the construction code, which should be followed?
a) API 510
b) the construction code
c) either the API 510 or the construction code based on inspector's
recommendation
d) the code with the most stringent requirements
a)
10. During a vessel alteration, if there is a conflict between the requirements of API
510 and the construction code, which should be followed?
a) API 510
b) the construction code
c) either the API 510 or the construction code based on inspector's
recommendation
d) the code with the most stringent requirements
a)
11. An in-service vessel is being repaired or altered. If there is a conflict between the
requirements of API 510 and the legal jurisdiction, which should be followed?
a) API 510
b) the legal jurisdiction
c) the most stringent requirements
d) either set of requirements based on engineer and AI approval
c)
a) API 510
b) the legal jurisdiction
c) the most stringent requirements
d) either set of requirements based on engineer and AI approval
c)
13. A stainless steel vessel has a MAWP of 10 psig at 700 F. The vessel has a diameter
of 24" and a length of 8'. The remaining life of the vessel is 48 years. What is the
maximum internal interval?
a) 5 years
b) 10 years
c) 12 years
d) 24 years
e) based on owner/user procedure
e)
14. An insulated carbon steel vessel has a MAWP of 220 psig at 200 F. The vessel has a
diameter of 4.5" and a length of 8'. A thinned area from CUI corrosion needs to be
repaired. The repair must be in accordance with:
a) API 510
b) ASME B&PV Section VIII
c) original edition of the construction code
d) current edition of the construction code
e) owner/user procedure
e)
15. Which of the following vessels is considered outside the scope of API 510?
a)
a) API 579
b) API 660
c) API 2201
d) ASME B&PV Section V
e) ASME B16.5
a)
a) API 573
b) API 579
c) API 580
d) API 2201
c)