Beruflich Dokumente
Kultur Dokumente
Infinet II
i2810 Series Local Controllers
The i2810 Series controllers are designed for control
of Air Handling Units, Roof Top Units, and other
mechanical plant equipment.
02
• Local, Extended Storage of Log Data The i2810 communicates with the entire Andover
• View and Modify Information with Optional
Continuum Infinet RS-485 field bus (i.e. both
Smart Sensor Display
Andover Infinet and Andover Infinet II controllers)
and is compatible with both the Andover
• Local, On-Board Service Port Continuum CyberStation and Infinity SX 8000 front-
ends. The i2814 is only compatible with Andover
Continuum. Up to 254 Andover Continuum
Infinet devices can be networked to any Andover
Continuum network controller.
Schneider Electric One High Street, North Andover, MA 01845 USA Telephone: +1 978 975 9600 Fax: +1 978 975 9674 www.schneider-electric.com/buildings
SDS-I2810-US.BU.N.EN.11.2011.0.00.CC
03
Dimensional Drawings
Increased Reliability with Flash Memory
The i2810’s non-volatile Flash memory stores your
operating system and application programs, so that
in the event of a power loss, your application will
be restored when power is returned. In addition,
the Flash memory allows for easy upgrades of your 1
operating system via software downloads, eliminating
the need to swap out proms.
2
The i2810 controllers include an on-board battery to
safeguard your runtime data — protecting all point
data and log data from being lost if power is removed.
Inputs
The input configuration on the i2810 Series consists 4
of eight full range, 12-bit universal inputs that accept
voltage (0-10VDC), digital (on/off), counter signals
(up to 4Hz), temperature signals, or supervised
alarm circuits for security applications or broken wire
3
detection. The i2810 Series offers an additional input
to support the Andover Continuum Smart Sensor, or
any standard room temperature sensor.
Outputs
The i2810 contains eight Form C relay outputs,
each rated for 24 VAC/30 VDC, 3 amp, while the
i2814 contains four Form C relay outputs and four
analog outputs (0-10V). Both the relay and analog
outputs have manual override switches, with software
feedback of the switch position.
I/O Expansion
The i2810 contains an I/O expansion port for
the addition of up to two Andover Continuum xP
expansion modules directly on the bottom of the
controller. The xP family of modules includes the
xPUI4, xPDI8, xPDO2, xPDO4, xPAO2, and xPAO4.
In addition to two input/output modules, the I/O bus
supports the xP Local Display Module, which allows
the user to view and change point values.
Schneider Electric One High Street, North Andover, MA 01845 USA Telephone: +1 978 975 9600 Fax: +1 978 975 9674 www.schneider-electric.com/buildings
SDS-I2810-US.BU.N.EN.11.2011.0.00.CC
AC POWER
24 VAC
30 VA
50/60 HZ 04
1
Andover Continuum Infinet II
i2810 Series Local Controllers
2 N
Features (continued) 3 L +
DC POWER
12-28 VDC
20W
AC POWER
24 VAC
30 VA TD
50/60 HZ
Dimensional
4 1+ Drawings
Software Capabilities 5 - RS-485
The dynamic memory of the i2810 can be allocated 2 N
AC POWER
24 VAC
6 SHLD 30 VA
B
DC POWER
PORT 12-28
12-28 VDC VDC
REV:
20W
with intuitive keywords provides an easy method to 20W
CPU
PLACARD, INPUT,
tailor the controller to meet your exact requirements. 1 PowerTDDrawing
I2814 / I2810
ECO NUMBER:
4 + 45 45
TD
05-1001-223
Programs are entered into the i2810 using the 5 - RS-485
6 SHLD 1 44 1 44
Andover Continuum CyberStation. Programs are then 4 + RD 43 43
stored and executed by the i2810 controllers. 5 - RS-485
SERVICE
PORT
42 42
RESTARTCPU
ECO #11244
6 SHLD 2 41 2 41
ECO NUMBER:
Programming multiple i2810 Series controllers is 40 40
2 Communication
TITLE:
inherently easy with Plain English. A complete copy RD 39 39
P/N:
Drawing
RESTART
of one i2810 controller’s programs can be loaded 3 38 3 38
SERVICE
SCALE:
1 OF 1
FULL
directly into other i2810 controllers without changing PORT
37 37
SCALE:
SHEET:
any point names or programs. CPU 36 36
ECO NUMBER:
UNIVERSAL 4 35 4 35
11/3/04
INPUTS
Smart Sensor Interface UNIVERSAL7 RET 34 34
DATE:
8 IN 1
The i2810 provides a built-in connection for Andover INPUTS
9 IN 2
M.ROGERS
1
11 IN 3
8 IN 121 IN 4RESTART
2
5
13 RET
programmable keypad that enables operators and 9 IN 142 IN 5
6
7
8
SOFTWARE:
DRAWN BY:
occupants to change setpoints, balance VAV boxes, 15 IN 6
10 RET16 RETOFF ON
monitor occupancy status, and turn equipment on 17 IN 7
1 33 I 33
SCALE:
11 IN 183 IN 8
and off. An enhanced version of the Smart Sensor is SMART2 5 32 5 V 32
SENSOR3
also available with a 4-digit custom LCD that provides 12 IN 419 SPWR 4 31 GND 31
20 RET
5
the following icons: PM, %, °, Setpoint, Cool, Heat, 13 RET21 IN 9
24VDC
6 30 I 30
SOFTWARE:
28 GND 28
15 IN 6
Local Display 7 RET 27 I 27
16 RET
The local display with keypad (xP-Display) allows for 8 IN 1 7 26 7 V 26
17 IN 7
the addition of a fully programmable local display 9 IN 2 25 GND 25
180mA
Optional Wireless Andover Continuum Infinet 15 IN 6
The i2810 Series Andover Continuum Infinet EXP PORT PWR
3 16Smart
RET Sensor and 4 Outputs Drawing
controllers can also communicate using a wireless Inputs Drawing
17 IN 7
mesh network. Simply plug Andover Continuum
18 IN 8
Wireless Adapters into the service ports of these SMART
controllers with wireless compatible firmware to create SENSOR
a wireless mesh network that sends and receives 19 SPWR
Schneider Electric One High Street, North Andover, MA 01845 USA EXP+1
Telephone: PORT
978PWR
975 9600 Fax: +1 978 975 9674 www.schneider-electric.com/buildings
SDS-I2810-US.BU.N.EN.11.2011.0.00.CC
05
Schneider Electric One High Street, North Andover, MA 01845 USA Telephone: +1 978 975 9600 Fax: +1 978 975 9674 www.schneider-electric.com/buildings
SDS-I2810-US.BU.N.EN.11.2011.0.00.CC
06
All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change
without notice.
Schneider Electric One High Street, North Andover, MA 01845 USA Telephone: +1 978 975 9600 Fax: +1 978 975 9674 www.schneider-electric.com/buildings