Beruflich Dokumente
Kultur Dokumente
Prepared for
Friday, 19 Oct 2007
Version 1.0
Prepared by
Vinod Dadhe
vinodvd@microland.net
Contributors
Aslam
aslamus@microland.com
Revision
Change Record
Reviewers
This document describes about the MS ISA 2006 server deployment at HIRCO. In this
document, we have detailed the procedures followed for installing and configuring MS ISA
2006 server at HIRCO.
This document outlines the following sections:
1. Insert the ISA 2006 Enterprise version CD in the CD-ROM drive & Double click on
isaautorun.exe. Click Run on following window.
3. In the Microsoft ISA Server 2006 Enterprise installation dialog box, click the Install ISA
Server 2006 link.
5. On the License Agreement page, select the I accept the terms in the license agreement
option and click Next.
6. On the Customer Information page, enter your User Name, Organization and Product
Serial Number and click Next.
7. On the Setup Scenarios page, select the Install both ISA Server services and
Configuration Storage server option. Click Next to Proceed.
9. On the Enterprise Installation Options page, select the Create a new ISA Server
enterprise option. Click Next to proceed.
13. In the Addresses dialog box, click OK. Generally ISA firewall setup with multiple
interfaces, these addresses would define the default Internal ISA firewall Network.
Click Add & add HTTP & HTTPS protocols as shown below. Click Next
1. Insert the ISA 2006 Enterprise version CD in the CD-ROM drive & Double click on
isaautorun.exe. Click Run on following window.
3. In the Microsoft ISA Server 2006 Enterprise installation dialog box, click the Install ISA
Server 2006 link.
5. On the License Agreement page, select the I accept the terms in the license agreement
option and click Next.
7. On the Setup Scenarios page, select the Install both ISA Server services and
Configuration Storage server option. Click Next to Proceed.
9. On the Enterprise Installation Options page, select the Create a new ISA Server
enterprise option. Click Next to proceed.
13. In the Addresses dialog box, click OK. Generally ISA firewall setup with multiple
interfaces, these addresses would define the default Internal ISA firewall Network.
1. Start the ISA Admin Console & create the Exchange web client publishing rule as shown in
following figure.
2. Following Wizard will start. Type the Rule name as shown below & click Next to proceed.
3. Select Exchange Server 2007 & Outlook Web Access as shown below.
8. Now configure the web listener. Click New in the following dialog box.
10. Select Require SSL secured connections with client option & click next to continue
12. Select the option as specified below & click Select Certificate.
15. Select the HTML Form Authentication as shown below & click next to proceed
2. On the welcome page, type the Name of the rule & click next to proceed.
3. Select Exchange Server 2007 & Outlook Anywhere (RPC/HTTPS) option as shown below & click
next.
5. Select the Use SSL to connect … option as shown below & click next to proceed.
7. Select the Options as specified below & type the public name & click next to proceed.