Beruflich Dokumente
Kultur Dokumente
ASTM A490 bolts are supplied as plain (black) only. These bolts are
heat treated to a tensile strength range of greater than 150 ksi.
Medium carbon, alloy steel is used for these bolts. Dimensions are
as specified for Heavy Hex Structural Bolts in ANS/ASME B1.1.
http://www.afast.com/StructuralBolts.html 11/12/2011
What is 8.8 grade steel Page 1 of 2
Enter question or phrase... Search: All sources Community Q&A Reference topics
Browse:
Unanswered questions
New questions
New answers
Reference library
Sign in using:
What is 8.8 grade steel?
In: Civil Engineering, Mechanical Engineering, Architecture [Edit categories]
Remember me
Improve
Sign in
A grade 8.8 fastener can be manufactured from any material whose mechanical properties meet or exceed the
Create account
requirements set forth in the relevant harmonised standards.
The two-digit nomenclature is not used to describe individual steel grades and only applies to metric fasteners defined
under ISO 965 (as well as derived standards)
The designation system is based on two numbers e.g 8.8 . The first number is the tensile strength of the bolt material Answer these
2
(N/mm )/100. The second number is = 1/100.(the ratio of the Proof (or Yield ) stress and the Tensile strength
What does it mean when it does connecti
expressed as a percentage = 100.[Yield (Proof stress) /Tensile strength] /100 do on call of duty black
meaning that a grade 8.8 bolt has a nominal ultimate tensile strength (UTS) of 800N/mm2 (or Mpa) and a nominal In: Call of Duty Black Ops
yield strength of 640N/mm2 (or Mpa).
2
These values are not expressed in Kg/mm or PSI as the first is an expression of mass by surface-area, the second is
Did the leaders of the revolts to the
Spaniards manifest nationalism?
an expression of weight by surface-area and neither are true units under the SI system.
Lastly, the actual steel grade used by manufacturers may vary but in most cases, a grade 8.8 fastener (self-colour, In: History
black-oxide or zinc plated) will be manufactured from a medium-alloy medium carbon steel, typically with 0.30 - 0.50
% Carbon and alloyed with other elements such as Molybdenum, Vanadium, Manganese and sometimes Boron or Did King Louis XVI cheat on his wife?
Cobalt in small quantities. These alloying elements provide the required mechanical properties to reach the minimum In: French History
strength set forth by the harmonised standards.
What are the process of making beer?
Bare in mind that people sometimes refer to "high-tensile bolts" which are typically grade 8.8 or superior under the In: Drinks and Beverages
metric fastener system. Grade 8.8 and superior bolts should always have their grade permanently marked on the
head to differentiate them from "low-tensile bolts" as inadvertantly replacing the former with the latter could have
disastrous effects. Recent recommendations
Grade 4.6 bolts are typically refered to as "low tensile" and are often used in the construction industry as these bolts
offer higher ductility and resilience compared to "high-tensile" bolts.
Hope this helps.
Home
Welcome
Recent site activity
Help center First answer by Quirkyquantummechanic. Last edit by Paul Schilbach. Contributor trust: 1 [recommend contributor].
Browse categories Question popularity: 2 [recommend question]. [report abuse]
Random question
Promoted questions Like Be the first of your friends to like this.
Community forum
Relevant answers:
What is the density of high tensile steel grade 8.8?
It is not 12.9 as previously stated.There is no specific steel grade used in grade 8.8 fasteners meaning that the
exact density will vary from manufacturer to manufacturer.As a general rule of thumb,...
Can lower grade of SS steel be used for making higher grade of SS steel?
Yes, higher grade stainless is achieved by cold working a lower grade stainless steel
http://wiki.answers.com/Q/What_is_8.8_grade_steel 11/12/2011
What is 8.8 grade steel Page 2 of 2
Answer:
What are the different grades of steel? Recent questions
The strength of steel is graded based on it's yield strength- the point that it will have a permenant deformation
from a load. Steel will be graded however an engineer requires it to be in order to...
What are the advantages of Term life insurance
Related ads: What are the advantages of two way radios over
mobile phones
Federal Steel Supply, Inc www.FedSteel.com What are the advantages of the Apple Ipad2 over
Carbon and chrome-moly steel pipe Heavy wall tubular goods from stock the original
Ads by Google Civil Engineering Stainless Steel Carbon Steel Grades Bolt Grade
http://wiki.answers.com/Q/What_is_8.8_grade_steel 11/12/2011