Sie sind auf Seite 1von 5

SYSTEM

PAINT SYSTEM GUIDE 3006

a five page issue February 2003


revision of 12-1999

This guide indicates which Sigma systems may be used for the protection of the various parts of a vessel.
Sheet numbers in the 3000 range refer to the system data sheets which are found in the green coloured
section of the Sigma Marine Manual.
The various paint specifications as mentioned on a system data sheet are indicated by the figures 1 up to 9.
These specification numbers refer to paint systems that can be used for those parts of a vessel being
mentioned in this guide.

SPECIFICATION NUMBERS FOR:


TYPE OF SYSTEM/ conven- chlori- vinyl tar epoxy poly- chlori- sili-
COATING DATA tional nated tar epoxy ure- nated cates
FOR SHEET rubber thane rubber/
NUMBER modif.
acrylic
SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC.

BOTTOM AND BOOTTOP


– anticorrosive system 3101 – 8 7 2 1,2,3, – – –
from keel to d.l.l., 4,5,6
rudder and sea inlet
boxes
– antifouling system 7285 – * * * * – – –
7297 – * * * * – – –
7371 – * * * * – – –
7375 – * * * * – – –
7384 – * * * * – – –

* see data sheet

TOPSIDE AND BOOTTOP


– from l.l.l. to top of 3102 9 – – – 1,2,3, 1,2,3, 8 –
bulkwarks, forecastle 4,5,6, 4,5,6,
and poop sides 7 7
including hawsepipes

WEATHER DECKS
– exposed steel decks 3103 4 – – – 1,2,3 1,2,3 5 –
and house tops
– under deck planking 3108 2 – – – – – – –

page 1/5
SYSTEM

PAINT SYSTEM GUIDE 3006

February 2003

SPECIFICATION NUMBERS FOR:


TYPE OF SYSTEM conven- chlori- vinyl tar epoxy poly- chlori- sili-
COATING SHEET tional nated tar epoxy ure- nated cates
FOR NUMBER rubber thane rubber/
modif.
acrylic
SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC.

SUPERSTRUCTURE
EXTERIORS
– exposed accommo- 3104 2 – – – 1 1 3,4 –
dation, deck and
mast houses,
forecastle and poop
bulkheads, hatch
covers and coamings,
bulwarks (inside),
masts, derrick posts
and derricks (outside),
funnel (outside)

DECK FITTINGS
– windlass and 3104 2 – – – 1 1 3,4 –
winches, bollards
and fairleads,
ladders and catwalk,
davits, piping,
ventilators, engine
room skylight etc.,
inside masts and
derrick posts,
seatings and
trunking

LIFE BOATS
– aluminium parts 3108 – – – – 1,5 5 – –
– steel parts 3103 4 – – – 1,2,3 1,2,3 5 –
– wooden parts 3103 4 – – – – – – –
3108 4 – – – – – – –

ANCHORS, CHAINS, 3108 2 – – – – – – –


CHAINLOCKERS

page 2/5
SYSTEM

PAINT SYSTEM GUIDE 3006

February 2003

SPECIFICATION NUMBERS FOR:


TYPE OF SYSTEM conven- chlori- vinyl tar epoxy poly- chlori- sili-
COATING SHEET tional nated tar epoxy ure- nated cates
FOR NUMBER rubber thane rubber/
modif.
acrylic
SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC.

MACHINERY SPACES
AND PUMP ROOMS
– exposed steel in dry 3105 – – – – 1,2 1,2 – –
and wet spaces
above floor level
– steel behind linings 3108 2 – – – 1,3 – – –
and insulation
– asbestos insulation 3105 – – – – – – 5 –

ACCOMMODATION
AND STORES
– exposed steel in
– dry spaces 3105 3 – – – 1,2 1,2 4,5 –
– wet spaces 3105 – – – – 1,2 1,2 – –
– steel behind linings 3108 2 – – – 1,3 – – –
and insulation
– battery locker 3104 – – – – – – 3 –
– woodwork 3105 3 – – – 1,2 1,2 4 –
3108 4 – – – – – – –

CARGO HOLDS AND


VOID SPACES
– dry cargo hold and 3107 5 – – – 1,2,3, – – –
access trunks 4
– abrasive bulk cargo 3107 – – – – 1,2 – – –
(coal, ore, scrap etc.)
– bulk foodstuffs 3107 – – – – 1,2,3, – – –
(grain, dry foods, 4
sugar etc.)
– chemical bulk cargo 3107 – – – – 1,2 – – –
(cement, fertilizer,
sulphur etc.)

page 3/5
SYSTEM

PAINT SYSTEM GUIDE 3006

February 2003

SPECIFICATION NUMBERS FOR:


TYPE OF SYSTEM conven- chlori- vinyl tar epoxy poly- chlori- sili-
COATING SHEET tional nated tar epoxy ure- nated cates
FOR NUMBER rubber thane rubber/
modif.
acrylic
SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC.

– void spaces, 3108 2 – – – 1,3 – – –


cofferdams,
duct keel
– refrig. holds,
steel 3108 – – – – 5 5 – –
wood 3105 3 – – – 1,2 1,2 4 –
– floodable hold 3106 – – – 5 – – – –
3107 – – – – 1,2 – – –

DOUBLE BOTTOM 3106 – – – 5 1,2,3, – – –


4

TANKS
– ballast water and 3106 – – – 5 1,2,3, – – –
fresh water 4
– polluted water 3109 – – – – 1,2,3 – – –
– hot water 3141 – – – – 1 – – –
– drinking water 3325 – – – – 1,2 – – –
– animal-, fish-, and 3320 – – – – 1 – – –
vegetable oils 3322 – – – – 1 – – –
3323 – – – – – – – 1
3328 – – – – 1 – – –
– chemicals 3320 – – – – 1 – – –
3322 – – – – 1 – – –
3323 – – – – – – – 1
3328 – – – – 1 – – –
– extended white 3320 – – – – 1 – – –
products 3323 – – – – – – – 1
3328 – – – – 1 – – –

page 4/5
SYSTEM

PAINT SYSTEM GUIDE 3006

February 2003

SPECIFICATION NUMBERS FOR:


TYPE OF SYSTEM conven- chlori- vinyl tar epoxy poly- chlori- sili-
COATING SHEET tional nated tar epoxy ure- nated cates
FOR NUMBER rubber thane rubber/
modif.
acrylic
SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC. SPEC.

– white aliphatic 3320 – – – – 1 – – –


products 3323 – – – – – – – 1
3328 – – – – 1 – – –
– solvents 3322 – – – – 1 – – –
3323 – – – – – – – 1
– bilges, drain wells 3106 – – – 5 1,2,3, – – –
4

GALVANISED STEEL
AND NON FERROUS
METALS
– superstructure, 3108 – – – – 5 5 – –
mast, hand rail,
ladder, stanchion,
etc.

WOODWORK
– furniture, door, 3103 4 – – – – – – –
hand rail and 3108 4 – – – – – – –
wooden deck, etc.

HEAT RESISTANT 3140 1,3 – – – 2 – – –


SYSTEMS

Limitation of Liability - The information in this data sheet is based upon laboratory tests we believe to be
accurate and is intended for guidance only. All recommendations or suggestions relating to the use of the
products made by Sigma Coatings, whether in technical documentation, or in response to a specific enquiry, or
otherwise, are based on data which to the best of our knowledge are reliable. The products and information are
designed for users having the requisite knowledge and industrial skills and it is the end-user's responsibility to
determine the suitability of the product for its intended use.
Sigma Coatings has no control over either the quality or condition of the substrate, or the many factors
affecting the use and application of the product. Sigma Coatings does therefore not accept any liability arising
from loss, injury or damage resulting from such use or the contents of this data sheet (unless there are written
agreements stating otherwise).
The data contained herein are liable to modification as a result of practical experience and continuous product
development.
This data sheet replaces and annuls all previous issues and it is therefore the user’s responsibility to ensure
that this sheet is current prior to using the product.

page 5/5

Das könnte Ihnen auch gefallen