Beruflich Dokumente
Kultur Dokumente
for
Service Manual Viewer
Trademarks
Microsoft®, Windows XP®, Windows Vista®, Windows 7® and Internet Explorer® are trademarks or regis-
tered trademarks of Microsoft Corporation in the United States and/or other countries.
Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of AdobeSystems In-
corporated in the United States and/or other countries.
SMV_operation_manual_for_GeneralPC.pdf
INDEX
1. Starting and Finishing ....................................................................1
1-1. Starting SMV (Service Manual Viewer).....................................................1
1-2. Finishing of SMV (Service Manual Viewer)..............................................1
1
Chapter 2 Main Menu Screen
2-1. SMV Main Menu Screen.
2
Option setting function. (Only general PC)
3
Chapter 4 Browsing Various Manuals
Note:
As for [Pre-Delivery Inspection and Periodic Maintenance] button,
refer to Section 5. (Not available in Aus)
(2) Select a search method from (a) (b) (c) (d) corresponding to your
(a) purpose to display appropriate page of the manual.
(b) Note:
When clicking button on this screen, you can return to the
(c)
SMV Main Menu.
(d)
(i) All of the list of selected search method appears on the list of
the screen. When you click a title with mark, the mark turn
to , and titles on lower layer are displayed.
(ii) Select title with with mark and click button, next
search screen appears.
In addition, keyboard is available on the GROUP INDEX
SEARCH screen.Operation on the keyboard is as follows,
Cursor Key Shift selected line upward.
Cursor Key Store titles of lower layer.
Cursor Key Deploy titles of lower layer.
Cursor Key Shift selected line downward.
Fix and display contents of selected
Enter Key
item. -- to 4-2.
4
(b) Information Type Search
(ii) Select an information title to view from narrowed list and click
button. -- to 4-2.
5
(ii) The search is performed against all the contents and an
additional display is done on the search retrieval screen
every time the keyword becomes a hit.
If you find appropriate content on the search, it can be
SEARCH
immediately discontinued to press button.
END
Please select title to be browsed and press button.
After the search termination, please refer to " to IV-2" for the
way of looking at contents.
Note:
Information No is the number assigned to each page of
manuals. It appears along the bottom edge of each manual
display screen.
6
4-2. Display of manual page
Displays the appropriate page of the manual.
Return to main menu
Close SMV
SMV is opened by the new window (M.U.T.-3 Only)
Print screen
Bookmark
MSB (Mitsubishi Service Bulletin)
Go to the Table of contents including currently displayed
title.
Back to the last page
Back to previous page
Go to next page
Return to the list screen at search
Illustration Zooming
Clicking a boxed illustration on manual pages opens a full-page
illustration window (left fig.).
Clicking a point on the window allows further zooming.
Close enlarged illustration
NOTE:
It's possible to operate an illustration using an icon of Adobe
Reader.
Bookmarking Function
(1) Register Bookmark
Click on registering page, and the left screen appears. Click
then .
7
MSB View Function
If function button appears, the page has been revised and you
can check the revision information by viewing electronic MSB
(Mitsubishi Service Bulletin).
(2) If the page has two or more revision information, the left screen
appears. (If not, goes directly to (3))
Select a title you want to check, then click .
Note:
Clicking allows you to print the currently showing screen
only.
8
4-3. MSB list view function
It is a function which enables SMV to display all list of MSB which have already installed in the PC. Setting
search key, it is possible to narrow a search with more specified. MSB list view function is only available on the
SMV (Main), but there is a possibility can not be displayed MSB depends on data format.
9
A hit list screen
Because of specification for the number of characters, it will not be
displayed title and group completely depends on list, however all
description will be displayed in the message field located bottom of
screen with selecting each list.
Select MSB you want and click OK button, then it will be displayed. For
your information, available MSB is only PDF format and in case of
HTML format search function is available but can not be displayed
content.
10
4-4. SMV Multiple Startup(M.U.T.-3 PC only)
1. Under the same conditions of Model year and Model, SMV can be opened up multiple contents of manuals
separately.
By changing it on the Task-bar, it enable you to browse various contents as you like.
2. SMV which would be started up for the first time is called
SMV(Main), and others which would be started up by the
button located in the SMV button field and icon located on the
Task-tray is called SMV(Sub).
Display specification -
Configuration function -
4. Basically, left-most SMV on the Task-bar must be SMV(Main), all of others SMV must be SMV(Sub). There
are no limit can be started up SMV(Sub) in particular, however we recommend that SMV(Sub) to be started
up should be up to 4 contents as a guideline in terms of memory consumption.
SMV(Main) SMV(Sub)
5. When selected Model in the vehicle select screen of SMV(Main) will be changed and Configuration screen
will be opened up in SMV(Main), all of available SMV(Sub) will be closed after confirmation dialog box
appeared.
11
4-5. View Method of PDI Manual (Not available in Aus)
(1) Select the
[Pre-Delivery Inspection & Periodical Maintenance] button to
view the contents.
12
Chapter 5 Option Setting Function
5-1. Option Setting Function
(1) Click the [Configuration] button.
[Printer set]—
[Environment]
To set output conditions of the printer.
[Keyboard set]—
To select row of keys: Alphabetical-order or qwerty.
[Data Update]
[System Information]—
To view versions of installed software on the PC.
[Service manual]—
To view Installed Service Manual information, or to delete Service
Manual data.
When deletion of Service Manual data is requirerd, ask an
administrator about the method to delete.
[Data update]
13
Chapter 6 SMV Simple Browse Function
(1) When you set CD/DVD-ROM into CD/DVD drive, the W/M CD/
DVD menu screen appears automatically.
Click [Browse (by Simple Viewer)] button.
Note:
Though clicking [Browse (by SMV)] button displays the SMV
Main Menu, you cannot view Service manuals by the SMV
system until you perform the installation as usual.
(2) Select a type of manual and model year, on the upper left
portion of the screen.
(3) Click a title with mark from menu-tree on the left window.
When you click a title with no mark, titles in lower layer are
displayed.
14