Beruflich Dokumente
Kultur Dokumente
1
7. API 1169, Section 5.11.1
Inspectors should be aware that ________ are required for confined space entry when either a
hazardous atmosphere exists, it contains material where an occupant could be engulfed, or is
configured where an occupant could be trapped.
a. Permissions
b. Public awareness meetings
c. Permits
d. Work Orders
2
11. API Q1, Section 3.1.13
___________ is an obligation on an organization, including those that are statutory or regulatory.
a. Legal requirement
b. Legal promise
c. Illegal requirement
d. Legal measure
3
17. ANSI Z49.1, Section 6.3
After Hot-Work authorization and before welding or cutting is begun in a location not designed for
such purposes, inspection and authorization by a _______________ shall be required.
a. Chief Inspector
b. Foreman
c. Designated Management Representative
d. Welding Inspector
4
24. CGA, Section 4.20
Permanent markers for underground facilities are placed as close as practical at the center and
exit points of facilities located underneath bodies of water where facilities are at risk of being
damaged.
a. True
b. False
5
29. INGAA, CS-S-9, 4.1.1
The hydrotesting operations should be _______ when the testing personnel (including but not
limited to: contractor, contractor’s agents) or equipment are not working in a safe manner.
a. Continued
b. Suspended
c. Recorded
d. Reorganized
6
d. Amendment
36. ISO 9000, 3.5.8
Policy is the intentions and direction of an organization as formally expressed by its top
management.
a. False
b. True
7
42. API 1104, Section 11.4.9
The ________________ of inspected welds shall include the; weld number, datum location, length,
depth from the OD surface, and defect classification of all reported indicators.
a. Welding Inspector’s Report
b. Chief Inspector’s Report
c. Ultrasonic Testing Report
d. Weld Log
8
48. ASME B 31.8, 861.1.1 (c)
Coating shall be applied in a manner that ensures effective adhesion to the pipe. Voids, wrinkles,
holidays, and gas entrapment should be avoided.
a. True
b. False
9
53. ASME B 31.8, 845.3 (e)
Precautions shall be taken to prevent unauthorized operation of any stop valve that will make a
pressure relief valve inoperative. Two acceptable methods are:
a. Lock the stop valve in the open position
b. Lock the stop valve in the closed position
c. Install duplicate relief valves, each having adequate capacity by itself to protect the system.
d. a) and c) above
10
58. 49 CFR 192, 192.707
Line markers for mains and transmission lines must be written legibly on a background of sharply
contrasting color. The word “Warning”, “Caution,” or “Danger” followed by the words “Gas
Pipeline”. The marker should also contain;
a. The name of the operator and telephone number (including area code) where the operator can
be reached five days per week.
b. The name of the operator and telephone number (including area code) where the operator can
be reached at all times.
c. The name and address of the operator and the telephone number of the local office.
11
63. 49 CFR 195, 195.226
Each arc burn must be repaired. It may be repaired by completely removing the notch by grinding,
if the grinding does not reduce the _____________ to less than the minimum thickness required
by the tolerances in the specification to which the pipe was manufactured.
a. Outside diameter
b. Remaining wall thickness
c. Bevel
d. Fitting
12
69. 29 CFR 1910, Subpart J, 1910.145 (d) (10)
The ____________ emblem consists of a fluorescent yellow-orange triangle with a dark red
reflective border.
a. Accident prevention
b. Slow-moving vehicle
c. Biological hazard
d. Danger sign
14
81. 40 CFR 300, Subpart A, 300.5
Which of the following statements is incorrect regarding classification of any oil discharge that
poses a substantial threat to public health or welfare of the US or to the environment or results in
significant public concern shall be classified as a major discharge regardless of the following
quantitative measures:
a. Minor discharge means a discharge to the inland waters of less than 500 gallons of oil or a
discharge to the coastal waters of less than 10,000 gallons of oil.
b. Medium discharge means a discharge of 1,000 to 10,000 gallons of oil to the inland waters or
a discharge of 10,000 to 100,000 gallons of oil to the coastal waters.
c. Major discharge means a discharge of more than 10,000 gallons of oil to the inland waters
or more than 100,000 gallons of oil to the coastal waters.
15
87. FERC Wetlands & Waterbodies, VI-A (3)
When routing a pipeline through a wetland, the width of the construction ROW should be limited
to_________.
a. 50 feet or less
b. 75 feet or less
c. 100 feet or less
d. 80 feet
16
92. FERC Upland Erosion Control, IV-B(1)
Unless the landowner or land management agency specifically approves otherwise, prevent the
mixing of topsoil with subsoil by stripping topsoil from either the full work area or from the trench
and subsoil storage area (ditch plus spoil side method) in: WHICH STATEMENT IS TRUE?
a. Cultivated or rotated croplands, and managed pastures;
b. Residential areas;
c. Hayfields and other areas at the landowner’s or land managing agency’s request
d. All the statements are true.
17
d. Mulch
97. 33 U.S. Code Chap. 9, 403a
The creation of any obstruction, not affirmatively authorized by law, to the navigable capacity of
any waters, in respect of which the United States has jurisdiction, is prohibited.
a. True
b. False
18