Beruflich Dokumente
Kultur Dokumente
A INTERNAL
A SANITARY FIXTURES & FITTINGS: Rs. 544,750.00
B DRAINAGE Rs. 1,466,560.00
C WATER SUPPLY Rs. 2,003,385.00
B EXTERNAL
B DRAINAGE Rs. 8,535,440.00
C WATER SUPPLY Rs. 9,480,050.00
NOTE -
1. TOILET FIXTURE SUPPLY IS EXCLUDED. ONLY INSTALLATION IS CONSIDERED.
2. ALL WHITE GOODS ARE EXCLUDED.
3. BASIC FILTRATION SYSTEM IS CONSIDERED.
4. ALL CIVIL WORKS LIKE WATER TANKS, DRAIN SUMPS, STORM WATER TRENCH,
SEPTIC TANK, SOAK PIT ARE EXCLUDED.
5. DRAINAGE CHAMBERS, GULLY TRAP & CATCH BASINS ARE CONSIDERED.
6. ALL TAXES AND DUTY ARE EXCLUDED.
CHURCH FOR AKWA IBOM STATE GOVERNMENTINTERNATIONAL CHRISTIAN WORSHIP CENTER @ NIGERIA
BILL OF QUANTITIES FOR PLUMBING SYSTEM
Bill of Quantities
Sr.
Description Unit Qty. Rate (INR) Amount (INR)
No.
A. SANITARY FIXTURES & FITTINGS:
Cutting RCC & Brickwork surface if required and making good the same
9 Cum 10 3,000.00 30,000.00
including supply of extra quantities of required materials.
TOTAL CARRIED OVER TO SUMMARY 1,466,560.00
Sr.
Description Unit Qty. Rate (INR) Amount (INR)
No.
Internal Toilet
a. 15 mm dia RM R0 300.00 -
b. 20 mm dia RM 1461 360.00 525,960.00
c. 25 mm dia RM 220 425.00 93,500.00
d. 32 mm dia RM 938 550.00 515,900.00
e. 40 mm dia RM 265 675.00 178,875.00
f. 50 mm dia RM 289 800.00 231,200.00
g. 65 mm dia RM 74 975.00 72,150.00
h. 80 mm dia RM 32 1,700.00 54,400.00
i. 100 mm dia RM 0 2,600.00 -
Providing and fixing brass lever operated ball valve of full flow with
stainless steel ball (AISI 304 and spindle AISI 410) with settling and gland
2 of superior quality and having minimum working pressure of 10Kg/cm2.
( screwed end)
a. 15 mm dia No. R0 425.00 -
b. 20 mm dia No. R0 675.00 -
c. 25 mm dia No. 16 900.00 14,400.00
d. 32 mm dia No. 6 1,700.00 10,200.00
e. 40 mm dia No. 14 2,400.00 33,600.00
f. 50 mm dia No. 18 2,800.00 50,400.00
Providing and fixing gun metal gate valve with CI wheel of approve quality
3
( screwed end)
a. 65 mm dia No 8 5,500.00 44,000.00
b. 80 mm dia No 4 7,200.00 28,800.00
c. 100 mm dia No 10 12,000.00 120,000.00
Cutting RCC & Brickwork surface if required and making good the same
4 Cum 10 3,000.00 30,000.00
including supply of extra quantities of required materials.
TOTAL CARRIED OVER TO SUMMARY 2,003,385.00
C. WATER SUPPLY
Supply, Unloading, Storing, Safe keeping, shifting, installing, testing &
commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply
pipes inside the toilet with pipe as per CTS SDR - 13.5 at the working
pressure of 320 PSI at 23 deg. C & 80 PSI at 82 deg.C using solvent
welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers,
Brushing etc. including transition fittings connection between CPVC &
Metal pipe (G.I.) i.e. Brass adaptors (both male &female threaded)
confirming to ASTM D- 2846 with only CPVC solvent cement confirming to
1 ASTM F-493 with fabricated and subsiquently hot dip galvanized clamps /
structural steel supports as required / directed at site including cutting
chases and fitting the same with cement concrete / cement mortor as
required, including painting the exposed pipes with one coat of desired
shade of enamel paint. All termination points for insulation of faucets shall
have brass termination fittings. Installation shall be to satisfaction of project
manager/ consultant/ manufacturer of pipes & fittings
External
e. 40 mm dia RM 360 675.00 243,000.00
f. 50 mm dia RM RO 800.00 -
g. 65 mm dia RM 1450 975.00 1,413,750.00
h. 80 mm dia RM RO 1,700.00 -
i. 100 mm dia RM 1200 2,200.00 2,640,000.00
i. 150 mm dia RM 1368 3,200.00 4,377,600.00
Providing and fixing brass lever operated ball valve of full flow with
stainless steel ball (AISI 304 and spindle AISI 410) with settling and gland
2 of superior quality and having minimum working pressure of 16Kg/cm2.
( screwed end)
e. 40 mm dia No. 5 2,400.00 12,000.00
f. 50 mm dia No. RO
Providing and fixing gun metal gate valve with CI wheel of approve quality
3
( screwed end)
a. 65 mm dia No RO
b. 80 mm dia No RO
c. 100 mm dia No 10 12,000.00 120,000.00
c. 150 mm dia No 10 22,000.00 220,000.00
Providing and fixing gun metal horizontal non-return valve with screwed
4 ends tested to 10 KG/cm2
e. 40 mm dia No. 0
f. 50 mm dia No. 0
g. 65 mm dia No. 0
h. 80 mm dia No. RO 24,000.00 -
5 Providing and fixing float valve with pressure type float of approved make.
a. 25 mm dia No. RO 1,200.00 -
Providing and fixing single acting air release valves with screwed inlet
6 15mm dia as per I.S 12992 rated for 20Kg /cm Sq .and dia to be fitted on No. RO 1,600.00 -
450 x 450 x 600 mm internal dimensions with C.I.cover and frame of 38kg
No 1 16,000.00 16,000.00
wright.
Supplying,installing,testing and commissioning approved make cast brass
body water meter with necessary unions for fixing on the inlet main as
8 shown on the drawing, etc., 'complete with water meter chamber with
cover and necessary gate valve, union etc., complete
a. 80mm dia No. 1 18,000.00 18,000.00
b. 100mm dia No. ro
Cutting RCC & Brickwork surface if required and making good the same
9 Cum 10 3,000.00 30,000.00
including supply of extra quantities of required materials.
TOTAL 9,480,050.00
d) Set of accessories such as G.I headers for suction and discharge, control
valves, non return valves, pressure switches, pressure transducers,
pressure gauge, inter connecting power and control cabling etc. complete.
i) Supply Set 1
650,000.00 650,000.00
ii) Installation, testing & commissioning Set 1
Electrical Starter panels complete with O/L Relay with Single phasing
preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps,
contactors contacts for Building Automation System, interlocking, level
controller with operational mode as one pump working at low level, both
pumps at high level with a hooter alarm and cut off at dry level, cascade
operation, working / standby slelction, etc. suitable for the motor H.P. as
specified below and with provision for remote P.B. on/off complete as
required. The on/off operations for all pumps shall be available on central
BMS system