Beruflich Dokumente
Kultur Dokumente
uk
6 7
LED LED
All LED’s require a constant current (350mA or 700mA) and because they are
diodes polarity is critical. Wiring diagrams are included in the drivers section
to show how 1W and 2W LED’s are wired in series. Voltages and current are
inherently safe (ESLV) with low energy consumption.
Design: Spectron Systems Design: Maurice Brill Lighting Design
Project: Private Residence The ultra-long lamp life enables some fittings to be fully sealed and achieve Project: Hilton, Manchester
Product: LD20/RGB ratings up to IP68. Product: LD248/LW
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
8 9
LED LED
Please see the specification next to the LED fitting to see which sleeve fits with that particular product.
LD41/478
1m
/06 – 6 degree spot /15 – 15 degree medium /25 – 25 degree flood 44Ø 51Ø
(this is the most popular with
/478 SLEEVE 32Ø /479
30Ø SLEEVE 43.6Ø /476
cut-out
SLEEVE 46Ø /477
cut-out SLEEVE 53.4Ø
the best compromise between
intensity and beam angle)
40 31 41 41
1.5
LED colour options for LD41, LD43, LD60 Suffix
27.5Ø 30.5Ø
Warm White (2950K) /LWW
35.5
White (5000K) /LW
1 Blue /LB
Green /LG
Red /LR
/478 Black acetal sleeve 27.5Ø Amber /LA
40
/478 Black acetal sleeve Lens options for LD41, LD43, LD60 Suffix
32Ø 6 degree spot /06
/478SLEEVE
/478 SLEEVE 15 degree flood /15
8 x 25 degree fresnel ‘spreader’ lens /85
IP68 /478 SLEEVE
IP68 40
/479 Stainless steel sleeve
Installation either by directly bonding into the Finish options for LD43, LD60
surface or by ‘O’ Rings and the /478 Powder coated white / black
installation sleeve. 32Ø Stainless steel 316
30Ø 43.6Ø
/479
/479SLEEVE
SLEEVE
Accessory options for LD41, LD60 Suffix
Design: Lighting Design International Finish Options for LD41
Project: Cap Ferrat Installation sleeve (black acetal sleeve) /478
Product: LD256 Stainless steel 316 1 Use with 350mA Drivers on pages 82-83 Installation sleeve (stainless steel polished or brushed) /479
31
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
12 13
LED LED
LD43 LD52
Product code LED colour Lens angle Finish
with 4 countersunk fixings in the bezel as a matching miniature of our with 3 x 1W LED’s with 6º lenses for uplighting niches and columns, or works
LD52
FL180 bulkwark light. (Supplied complete with stainless steel pozidrive well with the 8x25º fresnel lens for interior or exterior window reveals.
No.4 screws) 35.5Ø Manufactured from aluminium and anodised silver or black. Fitting is bonded Example: LD52 / LWW / 15 / Silver anodised
directly into mounting surface.
59Ø
27.5Ø
Product code LED colour Lens angle Finish Finish options for LD52
LD43 Silver anodised (standard) Design: Light IQ
Powder coated white / black Project: Private Residence
Example: LD43 / LWW / 15 / Stainless steel
Use with 350mA Drivers on pages 82-83 Product: LD61
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
14 15
LED LED
Footlights – Lensed Product code LED colour Lens angle Finish Accessory
/474
Our range of LED uplighters has now been extended to include low glare Concrete Fixing Housing for “first fix” installation.
LD18
versions and 4 new luminiares using the latest 7W LED cluster for indoor and LD218 70Ø
outdoor use.
Supplied as standard with 316 stainless steel bezels, with hard anodized black Example: LD18 / LWW / 15 / Stainless steel / 474
10
or die cast bodies. When used on yacht exteriors the bodies can be
manufactured from stainless steel 316.
LED options 70
LD18 & LD218
available in 1W (LD18) and 2W (LD218) versions. The lens assembly is inclined 1W 350mA LD18 PG7
2W 700mA LD218 Gland
by 20º, for floor or wall wash or display illumination. As standard it has a black
anodised body with a polished stainless steel bezel. 32
LD39 LD190
LED colour options for LD39 Suffix
3 x 1W LED uplighter for columns and arches. A die-cast aluminium body and The LD190 utilizes a 7W LED cluster mounted behind an opal diffuser. It is mounted
stainless steel or cast aluminium bezel with toughened safety glass cover, White (5000K approx.) /LW inside a die-cast aluminium body with a stainless steel or cast aluminium bezel
suitable for 2000Kgs drive-over. Available with single colour LED’s or RGB for Warm White (3000K) /LWW and toughened safety glass cover, suitable for 2000Kgs drive-over.
Blue /LB
colour mixing or sequencing. An indicator light version with diffused opal glass
Green /LG
is also available – see the LD190. Red /LR
Forward voltage across this LED cluster is 18.5V
Amber /LA
Red, Green & Blue /RGB
100Ø with individual feeds for connection to sequence/dimming controller 100Ø
70Ø 70Ø
Bezel finish options for LD39 & LD190
Polished stainless steel
Brushed stainless steel
IP67 Polished brass (internal use only) IP67
Natural anodised (gun-metal grey)
LED colour options for LD190 Suffix
Accessory options for LD39, LD190 Suffix Warm White (3000K) /LWW
Product code LED colour Lens angle Finish Accessory
Concrete fixing housing - single cable entry /374 White (4500K) /LW
LD39 Concrete fixing housing - dual cable entry /373 Colour Mixing /RGGB
LD190 Floor mount bezel /375 See page 20 for LD190 accessories
Design: Richard Hargreaves
Concrete fixing trim /377 Project: Richard’s House
Example: LD39 / LWW / 30 / Brushed stainless steel / 373 see page 20 for accessory details
Use with 350mA (1W) Drivers on pages 82-83 Product: LD195
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
20 21
LED LED
LD39 and LD190 Accessories /373 and /374 Concrete fixing housing LD195 Product code LED colour Finish Accessory
/377 Concrete fixing trim Made of black anodised aluminium, the concrete housings are designed to be A square version of the LD190 with the same 7W LED cluster and opal diffuser.
LD195
The fixing trim is useful in floors or walls allowing screed, plaster or tiles to be set in concrete with the top edge at finished floor level. Forward voltage across this LED cluster is 18.5V
finished flush to the edge. It makes the bezel easy to remove for maintenance, Example: LD195 / LWW / Brushed stainless steel / 376
and with a clean edge around it. The trim has thread inserts to accept 3 x M4
screws to secure any round FootLight. 100 x 100 SQ
/374 Single cable entry LED colour options Suffix
103Ø 105Ø 17 Warm White (3000K) /LWW
White (4500K) /LW
19.5 Colour Mixing /RGGB
8.5 29 80
126Ø 19.5
106Ø
73 8.5
75Ø
21 9.5 Use with 350mA (1W) Drivers on pages 82-83
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
22 23
LED LED
73Ø
Glare Shield
78Ø
2.5
The LD153 must be used with one of the housings on the opposite page as they
ensure the IP67 rating. LD153/483SH LD153/483N
Forward voltage across this LED cluster is 18.5V
Glare Shield
110.5
Bezel finish options for LD153 140
Stainless steel 316 IP67
Polished stainless steel
PG7 94Ø 2.2
Antique bronze (solid bronze)
Gland
Concrete housing collar
89Ø Cut-out outer diameter is 86mm ±0.5 50
Fixing options for LD153 Suffix
IP67 111.5
Straight sided housing /483SH
Concrete housing /483N PG9
with integral driver /ID Gland
Design: Richard Hargreaves
Project: Richard’s House
Product: LD153/10 Please see page 26-27 for LED colour and lens options Use with 350mA (1W) Drivers on pages 82-83
170Ø 23
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
26 27
LED LED
1m
LED colour options for LD150 and LD153 Suffix Lens options for LD150 and LD153 Suffix
Design tip: In the photographs the distance
Warm White (3000K) /LWW
from the wall to the centre of the LED fitting
White (4500K) /LW 10 degree spot /10
is 125mm. Colour Mixing /RGGB 30 degree flood /30
/10 – 10° spot /30 – 30° flood
50.5Ø
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk
12.5
www.lightgraphix.co.uk
28 29
LED 41
LED
28Ø
LD64/478
Path Marker Footlights
Manufactured from 316 Stainless steel, these ultra small, robust 1W LED fittings Fixing is by bonding directly into the surface or by ‘O’ LD64
utilise a specially designed reflector to wash the surface around them. Rated Rings and the /478 installation sleeve. (page 9)
IP67 for mounting onto interior or exterior pathways, staircases and walls. 40
50.5Ø
32Ø
12.5
Product code LED colour Finish Accessory
LD64
LD65
41
Example: LD64 / LWW / Stainless steel / 478
28Ø
LED colour options Suffix
Warm White (2950K) /LWW
LD64 LD65 White (5000K) /LW LD65
120º angle of illumination. 2 x 120º angle of illumination. Blue /LB
Green /LG
Red /LR
Amber /LA
Accessory options
Installation sleeve (black acetal sleeve) /478
Design: Brilliant Lighting
Project: Private Residence
Product: LD64 IP67 Use with 350mA (1W) Drivers on pages 82-83
IP67
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
30 31
LED LED
Manufactured from 316 stainless steel and polycarbonate, these wall lights Fixing by directly bonding into the surface or by ‘O’ LD61
wash the surface around them using a specially designed reflector. They are Rings and the /478 installation sleeve. (page 9)
suitable for mounting in interior or exterior walls. They can also be used as 32Ø 27.5Ø 44Ø
indicators for steps and staircases and the colours look fantastic!
IP67
Product code LED colour Finish Accessory
LD61
LD62
35 12 35 12
Bezel finish options
Stainless steel
LD27
Oval luminaire with a 1W 350mA LED. Body - moulded polycarbonate. 28 9.2
55Ø 85Ø
LD27
LD28
IP65
Example: LD27 / LB / Polished chrome
IP65
28 7 88
LED colour options for LD27, LD28 Suffix Bezel finish options for LD27, LD28
Interior / Exterior Low Glare Wall or Step lights LD45 & LD245 LD46 & LD246
Re-designed to be IP65, and now manufactured with a stainless steel 316 bezel and black anodized body these high quality fittings can now be used for indoor and A small compact square fitting with the lens recessed for low glare. A 6º lens will The round version.
outdoor use. The compact design and lens set back reduces glare which make them ideal for steplighting. Two options are available for fixing - spring clips or ‘O’ kiss light across the step or 15º lens to wash light more directly to the edges.
rings with a first fix sleeve.
All are available with a 1W (eg. LD45) or 2W (eg. LD245) LED’s.
Two options are available for fixing - spring clips or ‘O’ rings with a first fix sleeve.
/SC Spring clips /476 ‘O’ Rings and Sleeve
48 50
LD45
44Ø 50x50sq 44Ø
Cut-out Cut-out
LD46
52Ø
2.5
IP65 IP65
LD57 & LD257 Product code LED colour Finish Fixing option
LD242A Product code LED colour Lens angle Finish Accessory
Specially designed for a client, with very minimal glare, it is an IP68 rated The LD242A has a Stainless Steel 316 body which is passivated and polished
LD57 LD242A
steplight or bulkwalk mounted yacht decklight with a 5mm Borofloat glass. The for use in swimming pool steps and wet areas. It comes as standard with a 2W
LD257
LED is hidden from view by a black anodized shield behind half the glass and 700mA LED, and as it has no visable fixing holes is installed using the / 476 Example: LD242A / LWW / 06 / Passivated polished stainless steel / 477
whilst the lack of a lens means output is lower, it is adequate for gentle deck and Example: LD57 / LWW / Brushed stainless steel / 477 sleeve and ‘O’ rings. (see page 9 for sleeve details)
steplighting without any glare from the lightsource (2W 700mA recommended).
Available in 1W (LD57) and 2W (LD257) versions. LED colour options Suffix
LED options
Warm White (2950K) /LWW
/SC Spring clips 1W 350mA LD57 /477 ‘O’ Rings and Sleeve White (5000K) /LW
2W 700mA LD257
50 50
Lens options Suffix
LED colour options Suffix
6 degree spot /06
Warm White (2950K) /LWW 15 degree flood /15
White (5000K) /LW 8 x 25 degree fresnel ‘spreader’ lens /85
44Ø Cut-out 25º 52Ø Blue /LB 44Ø 58Ø
Green /LG Cut-out
Red /LR Bezel finish options
Amber /LA
Passivated polished stainless steel (standard)
2.5 Powder coated white / black
Bezel finish options
/477 ‘O’ Rings and Sleeve
IP67 50 Stainless steel (standard) IP68
Polished stainless steel
Powder coated white / black
Use with 350mA (1W) or 700mA (2W) Drivers on pages 82-85 Use with 700mA (2W) Drivers on pages 84-85
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
40 41
LED LED
Interior Wall and Step lights LD10234 Product code LED colour Finish
LD44
A square recessed wall light with a single 2W LED, it has a brushed 2mm A tiny 1W LED step light with no visible fixings, just spring clips. Can also be
LD10234
stainless steel bezel with no fixings showing creating an attractive fitting for used as a downlighter, perhaps with 6º lenses set close to a wall in a corridor
indoor use. The specular reflector gives a good wash of light onto a path or floor Example: LD10234 / LWW / Brushed Stainless Steel 316 passivated as feature lights.
with minimal glare.
The LD10234 comes with an integral non-dimming driver for 230V mains input. LED colour options for LD10234 Suffix 34.5
Warm White (2950K) /LWW
White (5000K) /LW
90
IP44
IP54
Product code LED colour Lens angle Finish Lens options Suffix
LD10234 fixing
LD44
Comes as standard with first fix concrete box 62 6 degree spot /06
Example: LD44 / LWW / 06 / Stainless steel
15 degree flood /15
Surface Mount Spotlights LD51 + LD251 LD53 Product code LED colour Lens angle Finish
LD51 and LD53 are surface mounted spotlights offering great flexibility in IP67 LED spotlight available with a 1W (LD51) or 2W (LD251) LED. IP67 3 x 1W LED spotlight. Manufactured from aluminium and anodised silver
LD51/LD251
adjustment with a lockable pivot mechanism. They are suitable for interior or Manufactured from aluminium and anodised silver or black. It is suitable for or black. The stirrup allows 90º tilt, so with 8x25º fresnel lenses can be used to
LD53
exterior applications and for floor, wall or ceiling mounting. All components are sign lighting, gentle spotlighting of plants or garden features with 6° or 15° uplight into an arch.
fully potted and sealed to achieve IP67. lenses. The stirrup allows 90° tilt, so can be wall mounted as an uplighter. Example: LD51 / LW / 06 / Silver anodised
82
LED options for LD51 only
47.5
1W 350mA LD51
2W 700mA LD251
Finish options
Design: Richard Hargreaves
Project: Richards House Silver (standard) / black anodised
Product: LD53 Use with 350mA (1W) or 700mA (2W) Drivers on pages 82-85 Use with 350mA (1W) Drivers on pages 82-83 Powder coated white / black / RAL 9006
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
44 45
LED LED
Finish options
Polished chrome (standard)
Powder coated
23.5 250 60
35.5Ø
73Ø
Downlights including miniature versions for display Product code LED colour Glass option Finish
2.5m LD1050
LD1050
Example: LD1050 / LWW / EG / Powder coated white
Designed primarily for the yacht market this is our Mk1 LED replacement for
dichroic halogen downlights. By the time this comes to print we will have
developed Mk2 which will be aimed more at architectural situations! Please LED colour options Suffix
contact us for more details.
Warm White (2950K) /LWW
White (5000K) /LW
The light source is 7 high CRI warm white LED’s running at 700mA (2W each).
They are widely spaced (20mm) which creates a slightly larger fitting but
allows us to control heat efficiently without a large heat sink. Thus the LD1050
Glass options Suffix
is much shallower and more cost effective. It is rated IP54 from the front.
Etched glass /EG
At the moment the output is equivalent to a 35W 36° MR16, with good warm Clear Glass /CG
white colour, 25° beam angle and a CRI of 93.
We are offering two versions: An etched glass to hide the LED cluster from Bezel finish options
view when it is off, or a clear glass that gives slightly better efficiency, but Powder coated white / black
exposes the lenses to view.
IP54
Each LD1050 requires a 700mA remote driver. See page 85.
108Ø Cut-out
90Ø
50
LD71 & LD271 Product code LED colour Lens angle Finish
This is a very small recessed adjustable downlight suitable for undershelf or
LD71
cabinet lighting. It can also be used as a wall wash downlighter to create
LD271
different effects.
Available in 1W (LD71) and 2W (LD271) versions. Example: LD71/ LW / 06 / Powder coated white
LD71
LED options
48Ø Cut-out
1W 350mA LD71
2W 700mA LD271
35
LED colour options Suffix
Warm White (2950K) /LWW
White (5000K) /LW
56Ø
other LED colours available
25º
54
Finish options
Powder coated white / black
56Ø Polished brass
Polished chrome
25º
Project: Royal Academy of Arts note: as this uses a 2W LED,
Product: LD271/LWW/15 a suitable air gap is
Use with 350mA (1W) or 700mA (2W) Drivers on pages 82-85
required behind it.
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
50 51
LED LED
The clear polycarbonate extrusion was specifically designed for our LED Cool White 4000K
LightTube. This is extruded with a groove down the inside to align the flexible
PCB based LED’s and keep them in the same plane. It also protects the LED’s Voltage 24V
from impacts and dust, and facilitates easy cleaning.
Max Length ** 4000mm **
LD12LT LED Lighttube is IP44 as standard but can be sealed to IP68.
Min Bend Radius 2m (6m in horizontal plane)
* these figures were correct at time of printing, but with the advances in
LEDs, they will most likely change. Please check our website for latest
output figures.
Design: Lees Associates ** please consider transport and the practicalities of installing long lengths.
Project: Private Residence
IP44 rated tubes require 25mm for end cap and termination. When manufacturing
Product: LD12LT LED Lighttube
to IP68, end finishing becomes 60mm.
IP44 Use with 24V Drivers on pages 86-87
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
52 53
LED LED
Dimming is available by PMW of the 24V DC supply using a separate unit after Product code LED colour IP rating Length (DIM) Mounting RGB LED Lighttube
the driver. This requires input from a 1-10V control circuit or 100K The RGB LED lighttube is slightly larger and comes in a 16mm dia clear tube.
LD12LT White / LW
potentiometer LD12LT Eco The maximum length is 3000mm, and fixing is by cable ties
and screw down base. We can frost the tube for softer 15Ø
Example: LD12LT / LWW / IP44 / 1000mm / E2121
colour mixing.
Use with 24V Drivers on pages 86-87 Use with 24V Drivers on pages 86-87
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
54 55
LED LED
21
IP44
Fixing options Product LED Cover End cap Cable exit IP rating Length
code colour (DIM)
End cap options Suffix
As standard the LD20 comes with flat end caps and spring fixing clips, with a choice of cable exits. Flat end cap (supplied with fixing clips as standard) /SC
LD20
LD20 Eco Bracket surface mount /BSM
/SCEnd
LD20 Flat Flat Caps
end cap
with fixing clips LD20 Flat End Caps with fixing clips Bracket recessed mount /BRM
/RC Rear cable entry LD20Example: LD20
Flat End / LWW
Caps with/fixing
FD / SC / RC / IP44 / 1000mm
clips
LD20 Flat End Caps with fixing clips
Cable exit options Suffix
23.5 2 10 28 MIN LED options (when using the bracket end caps rear cable entry is the only option)
Rear cable entry /RC
High output (standard) LD20 End cable entry /EC
15.3 15.3 Eco output 5W per m. /ECO
10 IP rating Suffix
/EC End cable entry
DIM IP44 (standard) /IP44
IP54 External use /IP54
LED colour options Suffix
White (4000k) /LW
Warm White (2750K approx.) /LWW Lengths
Blue /LB
See table on page 51 for cut increments
Green /LG
Alternativly an end fixing bracket can be specified enabling a strong screw fixing , for either surface or recessed mounting. This comes as standard with a cable Red /LR
restraint on the back.
Amber /LA
Finish options
/BSM Bracket surface mount RGB /RGB
21 12.5 12.5 Silver anodised
14
15 19.5 Cover options Suffix
/BRM Bracket recessed mount
15 Clear cover (standard) /CC
DIM Frosted diffuser /FD
Opal diffuser /OD
Use with 24V Drivers on pages 86-87
Design tip: All of these products are fantastic for lighting jewellery, and when /LD32
using cool white LEDs the sparkle is great!
l The system is based on a 36mm x 25mm silver anodised aluminium profile
l Clear cover as standard.
See opposite page for details of the various profiles and beam angles available.
l Designed specifically for under shelf lighting
102°
l LED’s are mounted at 30°
l Emits a broad focused 102° beam.
l Made to custom lengths
l LED’s at 50mm or 75mm spacing.
/LD30
l This system is based on a 29mm dia silver anodised aluminium profile
l Clear cover as standard.
78°
l Emits a 78° focused beam.
l Very versatile with a range of fixing methods
l Ideal solution for display lighting, for example with jewellery, glassware
Design: Fieldworks Design Consultants Ltd and museum showcases.
Custom length note: Lengths are usually worked out to the nearest LED
Project: Calvin Klein, Heathrow T5 l Made to custom lengths
spacing. However we can manufacture to the exact specified length but this
Product: Custom LD25 under shelf linear LED l LED’s at 50mm or 75mm spacing.
might leave a gap at each end where the reflector stops.
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
60 61
LED LED
A practical maximum length is 2.5m depending on LED spacing and circuits. Product LED LED Cover IP rating Length
code colour spacing (DIM) IP rating Suffix
For Bathrooms LD25 can be sealed to IP54 LD25 IP44 (standard) /IP44
LD25 is available with RGB LED’s for colour changing - Discuss this with LGX at LD225 IP54 external use /IP54
the design stage to specify the effect required and control systems. 13 13
Example: LD25 / LWW / 50 / FD / IP44 / 1000mm
Finish options
Silver anodised
Use with 350mA (1W) or 700mA (2W) Drivers on pages 82-85
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
62 63
LED LED
The system is based on a 36mm x 25mm silver anodised aluminium profile with LED colour options Suffix
a clear cover as standard. It can be made to custom lengths with the LED’s at Warm White (2950K) /LWW
50mm or 75mm spacing. White (5000K) /LW
Blue /LB
Available with 1W (LD32) or 2W (LD232) LED’s. Green /LG
Red /LR
Amber /LA
RGB /RGB
300 RGB Tri Chip (use 75mm spacing) /RGBT
A practical maximum length is 2.5m with cable exits at intervals along the Example: LD32 / LWW / 50mm / FD / 600mm
Use with 350mA (1W) or 700mA (2W) Drivers on pages 82-85
length depending on LED spacing and circuits. DIM
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
64 65
LED LED
LD30 & LD230 – LED Linear System The 29mm dia. Aluminium extrusion comes with a clear cover as
This ultra-slim system uses a specially designed linear reflector to project the standard and is available with a wide range of mounting options.
output from the LED’s into a consistent broad spread of illumination ideal for
display cabinets. The multiple point sources create maximum sparkle. With the The system is custom made to each project’s requirements.
additional technical advantages of zero UV and insignificant projected heat this The specifier selects:
makes the system the ideal solution for jewellery, glassware and museum
showcases. l 1W or 2W LED’s
l LED Colour
Available with 1W (LD30) or 2W (LD230) LED’s. l LED spacing – 50 or 75mm
l Cover option
l Finish
l Mounting method
Actual Size l Lengths required
29mmØ
3
78° Beam angle
2
1 Aluminium Reflector
2 Extrusion
3 Secondary Heat–Sink
4 LED
Project: Goldsmiths
Product: LD30
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk METHOD 3
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
66 67
LED LED
M8
M8
M8 M8
DIM
DIM
6 6 METHOD 5 METHOD 5
METHOD 5
M8
M8 M8
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
68 69
LED LED
Method 5 Product LED LED Cover Mounting Length Finish Cover options Suffix
Linear profile is surface mounted using spring fixing clips which are screwed code colour spacing method (DIM)
to the surface, cables exit one or both ends. Clear cover (standard) /CC
LD30
Specify Dim LD230
Frosted diffuser /FD
DIM
13 2 2
26.7
TTransverse
Transverse
Transverseransv erse/ SSpread
pread
SSpread pread / 85T
85T A
Axial prA
Axial
xial/ SSpread
ead
xial SSpread pread / 85A
85A
Product LED LED Lens Finish Mounting Length Lens options Suffix
code colour spacing angle method (DIM)
Method 2 6 degree spot /06
LD35 15 degree flood /15
LD35/235 mounted on pivot brackets, which enable +/- 90° rotation. LD235 8 x 25 degree ‘Narrow’ beam /85N
Specify Dim
8 x 25 degree ‘Wide’ beam /85W
Example: LD35 / LB / 50mm / 15 degree / Silver anodised / Method 1 / 500mm
/ 85N / 85W
LED power Spacing Drivers
Narrow beam Wide beam
LD35 - 1W LED’s - min. 40mm 350mA
LD235 - 2W LED’s - min. 60mm 700mA
50
LD35/LD235 IP68
62Ø with end caps
Exterior LD35/LD235 is an IP68 class III SELV system suitable for harsh OAL 40
environments, whether on building facades, illuminating window reveals, or 50Ø
29.5 29.5
submerged in water features.
IP68
Specialist Applications Installation needs to be thought about when designing the detail for the LD25
As this is such a custom product it is best to send us a sketch of what you require
Prismex Panel. If the prismex is going to slide into place after the fitting of the
LD25 Prismex Panel LD25 then side access will be needed. If fitting is from the front only then there will
LD25 can be used with a prismex acrylic panel. When edge lit from both sides need to enough thickness top and bottom to hide the LD25.
LED options
an even spread of light is produced across the panel with good intensity.
Below is an example installation diagram: 1W LEDs (350mA)
2W LEDs (700mA)
As this is such a custom product it is best to send us a sketch of what you require.
LD30/LD230 Hanging Rail Product code LED colour Cover Fixing option Length
Using the LD30 Linear LED system, this is a very neat way of illuminating
LD30/LD230
clothes in wardrobes. The built in 78° reflector focuses the light down onto the
Hanging
clothes and as it is LED there is no UV and projected heat so it is perfect for rail
this application. The profile is held in place by two matching machined
brackets, and if a length of more than 1.2m is required then centre supports Example: LD30 Hanging rail / LWW / CC / 1000mm
can be specified. We recommend that the standard silver anodised finish is
used as this the hardest wearing.
Please send us a sketch if you require further rails to be added on top of each other. LED options
1W LEDs (350mA) LD30
2W LEDs (700mA) LD230
The choice of system and particularly the choice of control system, will depend
on the effect required, controls to link up to and how the colours are going to
be chosen and maintained.
Also, since new drivers and controllers are introduced constantly this means
Design: Spectron Solutions that each system supplied is subtly (or radically) different, so if colour Design: Spectron Solutions
Project: Private Residence changing is required contact the LGX technical department for scheme design Project: Private Residence
Product: LD20 RGB advice and support. Product: LD25 Prismex Panel
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
82 83
LED LED
LED drivers and wiring Please note: Drivers need adequate ventilation, allow space between multiple drivers.
LED’s are different to normal low voltage light fittings in that they must be wired in series, and use specific LED drivers.
These provide a constant 350mA current suitable for 1W LED’s and are available as interior and
350mA 1W Constant Current Drivers exterior versions (achieved by an IP68 enclosure). 350mA 1W Constant Current Drivers
They may be located up to 10 metres from a luminaire, with an ‘in series’ wiring method required They may be located up to 10 metres from a luminaire, with an ‘in series’ wiring method required
Mains L –
+
supply N 350mA or
DRIVER 700mA
TXDS2 TXDL06CC350 TXDP12 TXDLDIMTE TXDV15D350 TXDL18CC-350D TXDL20 TXDL36RGB
Number of 1W LED fittings 1-3 1-4 1-8 1-9 1 - 12 4 - 12 1 - 16 (2 x8) 36 (3x 3-12)
Output Current (mA) 350mA 350mA 350mA 350mA 350mA 350mA 350mA 350mA
Output Voltage (V) max 12.5V 2 -20V max 28V max 36V max 48V 12 - 58V 4 - 32V 48V
Dimensions when IP68 (mm) N/A IP67 as standard 250 x 50Ø 250 x 50Ø N/A IP67 as standard 250 x 70Ø N/A
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
84 85
LED LED
LED drivers and wiring They may be located up to 10 metres from a luminaire, with an ‘in series’ wiring method required. These come in both 350mA and 700mA output versions.
LED’s are different to normal low voltage light fittings in that they must be wired in series, and use specific LED drivers. Please note: Drivers need adequate ventilation, allow space between multiple drivers. They are sealed as standard to IP64.
These provide a constant 700mA current suitable for 2W LED’s and are available as interior and
700mA 2W Constant Current Drivers exterior versions (achieved by an IP68 enclosure). 700mA 2W Constant Current Drivers 12V / 24V Input Drivers
They may be located up to 10 metres from a luminaire, with an ‘in series’ wiring method required.
Mains L –
+
supply N 350mA or
DRIVER 700mA
TXDS2/700 TXDLDIMTE/700 TXDP17 TXDV15D700 TXDL20/700 TXDL36CC-700D TXDV24DC/1 TXDV24DC/2
Number of 2W LED fittings 1-2 1-4 1-6 1-6 1-8 1 - 12 1-3 1-3
Output Current (mA) 700mA 700mA 700mA 700mA 700mA 700mA 350mA 700mA
Output Voltage (V) max 5V max 18V max 24V max 24V 4 - 16V 12 - 58V – –
Dimensions when IP68 (mm) N/A 250 x 50Ø 250 x 50Ø N/A 250 x 70Ø IP67 as standard IP64 as standard IP64 as standard
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
86 87
LED LED
24V LED LightTube and LD20 Wiring and Drivers TXDO-DIM Wiring
DRIVER
24V DIMMING CONTROL
24V Constant Voltage These drivers provide a may be positioned up to 10 metres from a luminaire, limited by the specification of the Mains L –
+
LED MODULE
secondary cables installed. Please note: Drivers need adequate ventilation, allow space between multiple drivers. supply N
Drivers and Controllers
TXDO24020 TXDO-DIM
TXDO24075 LED MODULE
TXDL24100
1 - 10v
DRIVER LED MODULE DIMMING
Mains L –
+
supply N 24V
Dimensions LxWxH (mm) 109 x 50 x 35 220 x 46.2 x 43.6 230 x 65 x 42 172 x 42 x 20 172 x 42 x 20 172 x 42 x 20
TXDO-DIM RGB DMX Wiring
Dimensions when IP68 (mm) 250 x 70Ø 360 x 75Ø IP67 as standard 250 x 75Ø 250 x 75Ø 250 x 75Ø
DRIVER DIMMING CONTROL
– 24V
Mains L +
supply N
RGB LED MODULE
DRIVER 24V TXDO-RGB DMX
Mains L – LED MODULE TXDO24020
+ GND
supply N TXDO24075
TXDL24100 – DATA DMX INPUT
+ DATA
LED MODULE
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
88 89
LED LED
325
159
Large IP Box