Beruflich Dokumente
Kultur Dokumente
DRAWWORKS ENGINE : 2 units x GM Detroit Diesel Engines Model 7124-7201 Series 12V-71 ,
350 HP with Allison torque converters , water cooled, air start, spark
arrestor silencers.
COMPOUND : T32 transmission compound engine drive. 2 input and 2 output shafts.
Engine skids and bolted outrigger. 18" Fawick clutches and drums,
Broomwade compressor, belt driven pedestal mount, 14 groove belt
sheave with belts and sheave guard.
CROWN BLOCK : Continental EMSCO B127, Model H53029-D, 5 x 36" dia sheave,
1-1/8" groove for drilling line.
MAST : Continental EMSCO modified B127, open face, portable drilling mast.
Working platform and finger board, hinged ladder, slingline, swinging
catlike sheave, six sheave crown block crown safety platform
complete with handrails, set tong hangers, counterweights, pulleys
and wireline.
Gross Nominal Capacity : 403,000 lbs
Static Hook Load : 375,000 lbs
ROTARY TABLE : Continental EMSCO 27-1/2" rotary Model T-2750 54-1/4" , completely
enclosed rectangular fabriform case with manual locks, sealed rotary
mechanism, split table bushing and hook, roller chain, guards and
sprockets. Ratio 3.89 : 1. Rated capacity:
Under Dead Load : 500 tons
Under Rotating Load : 300 tons
MASTER BUSHING : Cam-tech MSPC master bushing complete with bowl #3, lifting sling,
and bit breaker adapter plate for 27-1/2" API Continental EMSCO
Rotary Table T2750 P/N: 1804
Camtech insert bowl #1 for 13-3/8" to 11-3/4" casing P/N: 1903 and
insert bowl #2 for 10-3/4" to 9-5/8" casing P/N: 1904
1
Km. 21 West Service Road corner Villonco Road
Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph
STANDPIPE : 4" x 3,000 psi standpipe with 4 clamps and 4 x 4" x 3,000 psi Demco
valves
SWIVEL : Oilwell PC 225 with 3" ID wash pipe and 6-5/8" LH API regular
connection. 225 ton rating
KELLY : 4-1/4" Hex Kelly x 40' long, 1-13/16" ID , 6-5/8 Reg LH Box x NC 46
Pin , with scabbard
5-1/4" Hex Kelly x 40' long, 6-5/8" Reg LH Box x 4-1/2" IF Pin , with
scabbard
KELLY DRIVE : Cam-tech 27 HDP heavy duty pin type drive kelly bushing complete
flat rollers with wrench and wiper assy for 4-1/4" API Square Kelly
Type 27 HDP, pin type drive kelly bushing complete with flat and v-
rollers for 4-1/4” and 5-1/4" API Hex Kelly
KELLY HOSE : 3" ID x 60' long x 5,000 psi, with Barney coupling and safety clamp,
PAT 2506494
MUD TANK : No. 1 Mud Tank: 290 bbls capacity, 32 ft L x 7.9 ft W x 6.3 ft H
compartment, mud ditch, complete with internal plumbing , 3 x 10HP
mud agitators , 2 x 50 HP mixing pumps, handrails, walkways,
stairway, 1 mixing hopper, miscellaneous pipes, valves and gates.
MUD PUMP : 2 units x Oilwell A560-PT with 6-1/2” liner x 8 stroke, MP- 3780 psi (4”
Liner), with Hydril 35502 Pulsation Dampener K-20 No. 3111340 ,
5,000 psig Flange 4 RTJ both with Cameron Type D Mud Pressure
gauge and OTECO Pressure Relief Valve 2” x 5M Model 21050, skid
mounted with manifold valves OTECO 3” x 3M. Coupled to GM
Detroit Diesel 12V-71 Engine 465 HP - 2,100 rpm & 409 HP 1,800
rpm with Allison HT-740 Transmission.
SHALE SHAKER : Harrisburg double tandem, double screen with 5HP electric
motor, shaker screen 4’ x 5’
2
Km. 21 West Service Road corner Villonco Road
Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph
DESANDER : Pioneer Model S2-12 volume master unit consisting of two 12" volume
master cones with replaceable Hycar bladders and one head indicator
gauge.
MUD CLEANER : Demco Model 4MC12 consisting of twelve each 4" style H cones with
BUNA-N liners. Installed above a 3' x 5' vibrator assembly with
adjustable tilt plan.
PUMP MANIFOLD : Desco - fabricated pump manifold designed for 3 way pump output
with 4” x Fig. 1502 Hammer Union Connection , 3 units 4” x 5M Gate
Valve , 3 units 3” x 5M Gate Valve and 2” x Fig. 1502 Hammer Union
Connection for Kill Line.
BLOWOUT PREVENTER : 13-5/8" x 3,000 psi Hydril Type GK Annular BOP, top studded and
bottom flange
13-5/8" x 3,000 psi Shaffer Type B Double Gate Hydraulic Ram BOP
complete with the following rams: 2-7/8” , 3-1/2” , 5” , 7” and 9-5/8”
ACCUMULATOR : Maasco Accumulator Unit c/w 1 triplex pump & 2 air pumps with 27
pcs accumulator bottles on rack , remote control panel , charging and
gauging assembly , 10 pcs x fire resistant BOP control hose, 1" ID x
25 ft L w/ stainless steel Armour Guard. Working Pressure: 5,000 psi.
Test Pressure: 7,500 psi. Both ends w/ SUS316 male NPT thread.
CHOKE MANIFOLD : Dual Choke Manifold, Skid mounted. 5,000 psig, with 5 units 2-1/16” x
5M Valve with adjustable and positive choke.
INSTRUMENTATION : Drillers instrument console showing weight indicator, tong line pull,
wellhead pressure, rotary RPM, two pump speed indicators SPM, two
pump pressure gauges, and rotary torque.
One (1) mud flow fill / stroke system consisting indicating and alarm
console with "percent of flow" meter, stroke count display and integral
audio alarm circuitry. Tank installation includes liquid level probes.
7 ea x 175 Watt Metal Halide Flood Light for mud tank area
3
Km. 21 West Service Road corner Villonco Road
Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph
4 ea x 175 Watt Metal Halide Flood Light for rig floor area
4 ea x 175 Watt Metal Halide Bullet Type Bulb for front / rear sub base
AIR WINCH : Atlas Copco Air Winch Model MHK 84 with lifting capacity of 2,000 kg
and maximum pull of 5,300 kg rope speed of 24 m/min when lifting full
load.
DRILLING LINE : 1-1/8" EIPS Drilling Line, 6 x 19 (9/9/1) Construction, IWRC (Steel
Center) Right Hand Regular Lay, Grade 180 kgf/mm2 with spare reel
1-1/8” x 10,000 ft.
RAISING LINE : 1 length x 1-1/2” dia. x 181’ , 6 x 37 IWRC (Power Steel) with spare
DEADLINE ANCHOR : National Type D deadline anchor with E-80 sensator for 1-1/8” drilling
line (tension cell).
AIR COMPRESSOR : Sullair LS-10 stationary screw type electric air compressor 440V
POWER PACK : Varco hydraulic power unit, PN: 14845 , max GPM: 32 , max
pressure: 2,000 psi , with spare motor and hydraulic pump.
DOG HOUSE : Dog house mounted on rig floor containing drilling recorder, H2S
monitoring equipment, mud indicating gauge and tool box.
PIPE RACK : 2 sets x 1,200 mm high x 8 m long triangular tumble type constructed
of 4-1/2" diameter pipe.
FUEL TANK : Skid mounted cylindrical fuel tank 16’ 1” long x 6’ 7” wide with transfer
pump , 15,000 L capacity.
DAY TANK : Water tank with 2 units centrifugal pump 4.26 m x 2.28 m x 1.98 m ,
19,300 L capacity.
DRILL PIPE : 209 jts x Premium 3-1/2" OD Drill Pipe, Grade G, 13.3 lbs/ft, Range 2,
with 4-3/4" OD tool joints and NC 38 Connection. (1 joint for repair)
4
Km. 21 West Service Road corner Villonco Road
Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph
189 jts x Premium 5" OD Drill Pipe, Grade E, 19.5 lbs/ft, Range 2,
with 6-1/2" OD tool joints and NC 50 Connection. (22 jts for repair)
6 jts x Premium 8" OD Drill Collar Spiral, 150 lbs/ft , 6-5/8 Reg
Connection. (2 jts for repair)
Side Door Elevator for 4”, 5-1/2”, 7”, 8-5/8”, 9-5/8” and 13-3/8” casing
DRILLING SPOOLS : 11” x 3M x 11” x 2M Flange Top & Bottom, height: 17.38”
11” x 3M x 11” x 2M (with closed Tee x 3M) Flange Top & Bottom,
height: 30.25”
11” x 3M x 11” x 3M Flange Top & Bottom, height: 24.25” , with side
outlet: 2-1/16” x 3M x 2-1/16” x 5M Flange (mud cross)
5
Km. 21 West Service Road corner Villonco Road
Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph
FISHING TOOLS : 3-7/8” Series 150 Overshot w/ 4-1/2 XH Box Top Connection
10-1/2” Flat Bottom Fishing Magnet w/ 6-5/8 Reg Pin Top Connection
SUBSTITUTES : Assorted saver sub, bit sub, crossover sub and lifting sub for above
kelly, drill pipes and drill collars
SITE OFFICE AND : 8’ W x 10’ H x 40’ L skid-mounted Rig Manager / Toolpusher Shack
ACCOMMODATION with office, sleeper, toilet and sink.
OILFIELD RIG TRUCK : MACK 6X4 Diesel, 285HP, Model: DM811SX with specs and pictures
attached.
6
Km. 21 West Service Road corner Villonco Road
Sucat, Muntinlupa City, Philippines 1770
Tel. Nos.: (632) 842-0860/61, Fax No.: (632) 809-0404
Website: http//www.desco.ph
CERTIFICATION RECORD:
The drilling rig is Desco Rig-30, also known as EMSCO GC-350T fitted with
B-127 drilling mast, previously with 290,000 lbs. static hook load as per
specification. The substructure and other various packages were modified
from its original design by Continental Emsco in 1981. This modification
includes the parallelogram type substructure and installation of the
drawworks on the drill floor.
Desco, after eighteen (18) months, then prepared the rig for a higher load
testing capacity of 375,000 lbs. This was carried out by Desco, after the
Structural Engineering Analysis has been performed by Loadmaster Derrick
& Equipment, Inc.. Actual load testing was witnessed by Unocal and Third
Party certifying body, ABS Consulting of Singapore, represented by Mr.
German L. Lastrella. ABS Load Test Certificate reference as follows: