Beruflich Dokumente
Kultur Dokumente
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>displ
<LLIMCRVMN1W1C1ENA1_RU1273>display alar
<LLIMCRVMN1W1C1ENA1_RU1273>display alarm all
Info: No alarm.
<LLIMCRVMN1W1C1ENA1_RU1273>displ
<LLIMCRVMN1W1C1ENA1_RU1273>display ala
<LLIMCRVMN1W1C1ENA1_RU1273>display alarm acti
<LLIMCRVMN1W1C1ENA1_RU1273>display alarm active
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>displ
<LLIMCRVMN1W1C1ENA1_RU1273>display curr
<LLIMCRVMN1W1C1ENA1_RU1273>display current-configuration int giga 0/2/4
#
interface GigabitEthernet0/2/4
portswitch
description HACIA_Gi0/2/1_ATN_RU1198
undo shutdown
port link-type trunk
port trunk allow-pass vlan 114 to 115 190 550 to 555 800 to 801
undo dcn
#
return
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>displ
<LLIMCRVMN1W1C1ENA1_RU1273>display curr
<LLIMCRVMN1W1C1ENA1_RU1273>display current-configuration
!Software Version V300R002C10SPC200
!Last configuration was updated at 2019-12-15 00:03:31+00:00 by SYSTEM
automatically
!Last configuration was saved at 2019-12-15 00:33:43+00:00
#
sysname LLIMCRVMN1W1C1ENA1_RU1273
#
set neid ac6ef0
#
info-center loghost source Vlanif190
info-center loghost 10.20.10.6
#
vlan batch 190 550 to 555
#
stp instance 0 priority 61440
stp instance 1 priority 61440
stp instance 2 priority 61440
stp enable
#
diffserv domain default
#
priority-template default
#
ip vpn-instance __LOCAL_OAM_VPN__
ipv4-family
#
undo pnp enable
#
vlan 190
description Gestion_ATN
#
vlan 550
description Trafico 2G
#
vlan 551
description O&M 2G
#
vlan 552
description Trafico 3G
#
vlan 553
description O&M 3G
#
vlan 554
description Trafico 4G
#
vlan 555
description O&M 4G
#
stp region-configuration
region-name R_CEG
revision-level 1
instance 1 vlan 2 to 2000
instance 2 vlan 2001 to 4094
#
acl number 2001
description SNMP ACCESS
rule 5 permit source 10.20.10.19 0
rule 10 permit source 10.12.35.45 0
rule 15 permit source 10.12.35.40 0
rule 20 permit source 10.20.10.26 0
rule 25 permit source 10.20.10.6 0
rule 30 permit source 10.20.10.7 0
rule 35 permit source 10.20.10.55 0
rule 40 permit source 10.15.0.43 0
rule 45 permit source 10.12.34.20 0
rule 50 permit source 10.12.34.21 0
rule 55 permit source 10.20.10.38 0
rule 60 permit source 10.12.34.30 0
rule 65 permit source 10.199.10.138 0
rule 70 permit source 10.199.10.5 0
rule 75 permit source 10.16.222.36 0
#
aaa
local-user root password irreversible-cipher $1c$]f(3Q<j7uS$!0!)8@e`\
+lj]vQx\2l&y-$M(|\n_ERFU_BF$!6X$
local-user root service-type ssh
local-user root state block fail-times 3 interval 5
local-user root user-group manage-ug
local-user clarocr password irreversible-cipher $1c$|'S3~~Nu[C$jDg-/FH|
O~TnbmP\N*F/>s,*G(Ixs*b3d`B,fOL$$
local-user clarocr service-type telnet
local-user clarocr level 3
local-user clarocr state block fail-times 3 interval 5
#
authentication-scheme default0
#
authentication-scheme default1
#
authentication-scheme default
authentication-mode local radius
#
authorization-scheme default
#
accounting-scheme default0
#
accounting-scheme default1
#
domain default0
#
domain default1
#
domain default_admin
#
interface Vlanif190
description *** INTERFAZ_VLAN_GESTION ***
ip address 10.199.17.205 255.255.255.240
#
interface Ethernet0/0/0
undo shutdown
ip binding vpn-instance __LOCAL_OAM_VPN__
ip address 129.0.0.1 255.255.255.0
#
interface GigabitEthernet0/2/0
shutdown
undo dcn
#
interface GigabitEthernet0/2/1
shutdown
undo dcn
#
interface GigabitEthernet0/2/2
shutdown
undo dcn
#
interface GigabitEthernet0/2/3
shutdown
undo dcn
#
interface GigabitEthernet0/2/4
portswitch
description HACIA_Gi0/2/1_ATN_RU1198
undo shutdown
port link-type trunk
port trunk allow-pass vlan 114 to 115 190 550 to 555 800 to 801
undo dcn
#
interface GigabitEthernet0/2/5
undo shutdown
undo dcn
#
interface GigabitEthernet0/2/6
shutdown
undo dcn
#
interface GigabitEthernet0/2/7
shutdown
undo dcn
#
interface GigabitEthernet0/2/8
shutdown
undo dcn
#
interface GigabitEthernet0/2/9
shutdown
undo dcn
#
interface GigabitEthernet0/2/10
shutdown
undo dcn
#
interface GigabitEthernet0/2/11
shutdown
undo dcn
#
interface GigabitEthernet0/2/12
shutdown
undo dcn
#
interface GigabitEthernet0/2/13
shutdown
undo dcn
#
interface GigabitEthernet0/2/14
shutdown
undo dcn
#
interface GigabitEthernet0/2/15
shutdown
undo dcn
#
interface GigabitEthernet0/2/16
shutdown
undo dcn
#
interface GigabitEthernet0/2/17
shutdown
undo dcn
#
interface GigabitEthernet0/2/18
shutdown
undo dcn
#
interface GigabitEthernet0/2/19
shutdown
undo dcn
#
interface GigabitEthernet0/2/20
portswitch
description HACIA_2G/4G
undo shutdown
port link-type trunk
port trunk allow-pass vlan 550 to 555
undo dcn
#
interface GigabitEthernet0/2/21
portswitch
description HACIA_3G
undo shutdown
port link-type trunk
port trunk allow-pass vlan 550 to 555
undo dcn
#
interface GigabitEthernet0/2/22
undo shutdown
undo dcn
#
interface GigabitEthernet0/2/23
shutdown
undo dcn
#
interface GigabitEthernet0/2/24
shutdown
undo dcn
#
interface GigabitEthernet0/2/25
shutdown
undo dcn
#
interface GigabitEthernet0/2/26
shutdown
undo dcn
#
interface GigabitEthernet0/2/27
shutdown
undo dcn
#
interface NULL0
#
undo dcn
#
ip route-static 0.0.0.0 0.0.0.0 10.199.17.193
#
snmp-agent
snmp-agent local-engineid 800007DB032841C6ACCE01
snmp-agent community read cipher %^%#`7X`/=gI%0X}-
i,ee[j.X{hsXDarDMNx^OW,"+g~ovSeCjEji)RF8{KbBj7KEftK<"0:l!'W[vSR_tW)%^%#
snmp-agent community read cipher %^
%#2(B(6s"%q##`|'7"MgtVAc+I(MukBGx)E}-]P8\W:DJPVU},>(o;gJ7,0+j.2:[|
&0my1F94YO=G;4H7%^%# acl 2001
#
snmp-agent sys-info version all
snmp-agent target-host trap address udp-domain 10.16.222.36 params
securityname cipher %^%#ESCY5Z)Ow1nU$v%n1d+~//W4OZk;sC6!,pF)zYv!%^%# v2c
snmp-agent target-host trap address udp-domain 10.199.10.138 params
securityname cipher %^%#i#qBUGkHl,`SygR99~xOR#lkA2*B#'`f7KU+R\NL%^%#
snmp-agent target-host trap address udp-domain 10.199.10.5 params securityname
cipher %^%#Vz`)W,"Bd+'H0{G%^(S/Km@#0hyShCBuK1E#'(61%^%#
snmp-agent target-host trap address udp-domain 10.255.26.8 params securityname
cipher %^%#t{"AYa\gN;%"rrV`$f<DhsWVY~&}L;b_V^E/+H=V%^%# v2c
snmp-agent target-host trap address udp-domain 10.255.26.9 params securityname
cipher %^%#}V/(RomPU*ilse8HQCi+"'kHD%DmxS#JMA9dK$$5%^%# v2c
#
snmp-agent trap source Vlanif190
#
snmp-agent trap enable feature-name system trap-name
hwSysSlaveSwitchSuccessNotification
snmp-agent trap enable feature-name system trap-name
hwSysSlaveSwitchFailNotification
snmp-agent trap enable feature-name system trap-name
hwSysClockChangedNotification
snmp-agent trap enable feature-name system trap-name hwSysReloadNotification
snmp-agent trap enable feature-name snmp trap-name authenticationFailure
snmp-agent trap enable feature-name snmp trap-name hwNmsPingTrap
snmp-agent trap enable feature-name trunk trap-name hwTrunkMemNumberChange
snmp-agent trap enable feature-name system trap-name hwSysIssuNotification
snmp-agent trap enable feature-name system trap-name
hwSysImageErrorNotification
snmp-agent trap enable feature-name system trap-name hwPatchUpdateTrap
snmp-agent trap enable feature-name system trap-name hwPatchErrorTrap
snmp-agent trap enable feature-name mstp trap-name newRoot
snmp-agent trap enable feature-name mstp trap-name topologyChange
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortStateForwarding
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortStateDiscarding
snmp-agent trap enable feature-name mstp trap-name
hwMstpiBridgeLostRootPrimary
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortRootGuarded
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortBpduGuarded
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortLoopGuarded
snmp-agent trap enable feature-name mstp trap-name hwMstpiEdgePortChanged
snmp-agent trap enable feature-name mstp trap-name hwMstpiTcGuarded
#
lldp enable
#
stelnet ipv4 server enable
stelnet ipv6 server enable
ssh user root
ssh user root authentication-type password
ssh user root service-type stelnet
ssh authorization-type default aaa
#
ssh server cipher aes256_ctr aes128_ctr aes256_cbc aes128_cbc 3des_cbc
ssh server hmac sha2_256 sha1
ssh server key-exchange dh_group_exchange_sha256 dh_group_exchange_sha1
dh_group14_sha1 ecdh_sha2_nistp256 ecdh_sha2_nistp384 ecdh_sha2_nistp521
sm2_kep
#
user-interface con 0
authentication-mode password
set authentication password cipher $1c$3Y-$IK"/fR$eQ<QD6|/,>yd`<7`<!
p7Ed<iNb:IV2m-.#JhA\Z9$
#
user-interface vty 0 4
authentication-mode aaa
user privilege level 3
idle-timeout 5 0
#
return
<LLIMCRVMN1W1C1ENA1_RU1273>sys
<LLIMCRVMN1W1C1ENA1_RU1273>system-view
Enter system view, return user view with return command.
[~LLIMCRVMN1W1C1ENA1_RU1273]tel
[~LLIMCRVMN1W1C1ENA1_RU1273]telnet ser
[~LLIMCRVMN1W1C1ENA1_RU1273]telnet server en
[~LLIMCRVMN1W1C1ENA1_RU1273]telnet server enable
Info: TELNET server has been enabled.
[~LLIMCRVMN1W1C1ENA1_RU1273]commi
[~LLIMCRVMN1W1C1ENA1_RU1273]commit
[~LLIMCRVMN1W1C1ENA1_RU1273]
[~LLIMCRVMN1W1C1ENA1_RU1273]user-int vty 0 4
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]pro
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]protocol inbo
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]protocol inbound all
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]commi
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]commit
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]
[~LLIMCRVMN1W1C1ENA1_RU1273-ui-vty0-4]q
[~LLIMCRVMN1W1C1ENA1_RU1273]q
<LLIMCRVMN1W1C1ENA1_RU1273>save
<LLIMCRVMN1W1C1ENA1_RU1273>save
Warning: The current configuration will be written to the device.
Are you sure to continue? [Y/N]:y
Now saving the current configuration to the slot 2 .
Info: Save the configuration successfully.
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>sys
<LLIMCRVMN1W1C1ENA1_RU1273>system-view
Enter system view, return user view with return command.
[~LLIMCRVMN1W1C1ENA1_RU1273]int giga 0/2/4
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]q
[~LLIMCRVMN1W1C1ENA1_RU1273]undo curr
[~LLIMCRVMN1W1C1ENA1_RU1273]undo curr con
[~LLIMCRVMN1W1C1ENA1_RU1273]undo ?
aaa AAA(Authentication,Authorization,Accounting)
acl Specify ACL configuration information
apply Apply
arp ARP module
arp-miss Specify ARP MISS configuration information
as-notation The AS notation
bfd Specify Bidirectional Forwarding Detection (BFD)
bgp Border Gateway Protocol(BGP)
bidirectional Configure bidirectional static CR-LSP
bit-error-detection Bit error
capture-packet Enable capturing packet
ccc Circuit cross connection
cfm Connectivity Fault Management
clock System clock
command Command line
command-privilege Specify the command level
configuration Configuration interlock
configuration-occupied Configuration exclusive occupied
cpu-defend Configure CPU defend policy
damp-interface Interface physical status damping
dcn Data Communication Network
dhcp Dynamic host configuration protocol
dhcpv6 Dynamic host configuration protocol for IPv6
[~LLIMCRVMN1W1C1ENA1_RU1273]undo confi
[~LLIMCRVMN1W1C1ENA1_RU1273]undo configuration int
[~LLIMCRVMN1W1C1ENA1_RU1273]undo configuration ?
exclusive Configuration exclusive occupied
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]dis th
#
interface GigabitEthernet0/2/4
portswitch
description HACIA_Gi0/2/1_ATN_RU1198
undo shutdown
port link-type trunk
port trunk allow-pass vlan 114 to 115 190 550 to 555 800 to 801
undo dcn
#
return
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]undo por
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]undo port tr
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]undo port trunk all
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]undo port trunk allow-pass vl
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]undo port trunk allow-pass
vlan 114 to 115 190 550 to 555 800 to 801
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]commi
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]commit
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]dis th
#
interface GigabitEthernet0/2/4
portswitch
description HACIA_Gi0/2/1_ATN_RU1198
undo shutdown
port link-type trunk
undo dcn
#
return
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]q
[~LLIMCRVMN1W1C1ENA1_RU1273]
[~LLIMCRVMN1W1C1ENA1_RU1273]
[~LLIMCRVMN1W1C1ENA1_RU1273]undo ip route-static 0.0.0.0 0.0.0.0 10.199.19.129
Error: The route does not exist.
[~LLIMCRVMN1W1C1ENA1_RU1273]clear config interface GigabitEthernet0/2/22
Warning: All running configurations of the interface will be cleared
immediately. Continue? [Y/N]:y
.
Info: Total 2 command(s) executed, 2 successful, 0 failed.
[~LLIMCRVMN1W1C1ENA1_RU1273]clear config interface GigabitEthernet0/2/5
Warning: All running configurations of the interface will be cleared
immediately. Continue? [Y/N]:y
Info: Total 2 command(s) executed, 2 successful, 0 failed.
[~LLIMCRVMN1W1C1ENA1_RU1273]#
[~LLIMCRVMN1W1C1ENA1_RU1273]undo vlan 800
[~LLIMCRVMN1W1C1ENA1_RU1273]undo vlan 801
[~LLIMCRVMN1W1C1ENA1_RU1273]undo vlan 114
[~LLIMCRVMN1W1C1ENA1_RU1273]undo vlan 115
[~LLIMCRVMN1W1C1ENA1_RU1273]commi
[~LLIMCRVMN1W1C1ENA1_RU1273]commit
[~LLIMCRVMN1W1C1ENA1_RU1273]
[~LLIMCRVMN1W1C1ENA1_RU1273]sysname LLIMCRVMN1W1C1ENA1_RU1273
[~LLIMCRVMN1W1C1ENA1_RU1273]#
[~LLIMCRVMN1W1C1ENA1_RU1273]stp region-configuration
[~LLIMCRVMN1W1C1ENA1_RU1273-mst-region]region-name R_CEG
[~LLIMCRVMN1W1C1ENA1_RU1273-mst-region]revision-level 1
[~LLIMCRVMN1W1C1ENA1_RU1273-mst-region]instance 1 vlan 2 to 2000
[*LLIMCRVMN1W1C1ENA1_RU1273-mst-region]instance 2 vlan 2001 to 4094
[*LLIMCRVMN1W1C1ENA1_RU1273-mst-region]#
[*LLIMCRVMN1W1C1ENA1_RU1273]
[*LLIMCRVMN1W1C1ENA1_RU1273]commi
[*LLIMCRVMN1W1C1ENA1_RU1273]commit
[~LLIMCRVMN1W1C1ENA1_RU1273]interface Vlanif190
[~LLIMCRVMN1W1C1ENA1_RU1273-Vlanif190]description *** INTERFAZ_VLAN_GESTION
***
[*LLIMCRVMN1W1C1ENA1_RU1273-Vlanif190]ip address 10.199.17.205 255.255.255.240
Error: The address already exists.
[*LLIMCRVMN1W1C1ENA1_RU1273-Vlanif190]undo shutdown
[*LLIMCRVMN1W1C1ENA1_RU1273-Vlanif190]
[*LLIMCRVMN1W1C1ENA1_RU1273-Vlanif190]commi
[*LLIMCRVMN1W1C1ENA1_RU1273-Vlanif190]commit
[~LLIMCRVMN1W1C1ENA1_RU1273-Vlanif190]interface GigabitEthernet0/2/4
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]portswitch
Error: The interface is already a L2 interface.
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]description
HACIA_Gi0/2/1_ATN_RU1198
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]undo shutdown
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]port link-type trunk
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]port trunk allow-pass vlan
190 550 to 555
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]dcn
Error: The global DCN is disabled.
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]commi
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]commit
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]dis th
#
interface GigabitEthernet0/2/4
portswitch
description HACIA_Gi0/2/1_ATN_RU1198
undo shutdown
port link-type trunk
port trunk allow-pass vlan 190 550 to 555
undo dcn
#
return
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/4]#
[~LLIMCRVMN1W1C1ENA1_RU1273]interface GigabitEthernet0/2/20
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/20]portswitch
Error: The interface is already a L2 interface.
[~LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/20]description HACIA_2G/4G
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/20]undo shutdown
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/20]port link-type trunk
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/20]port trunk allow-pass vlan
550 to 555
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/20]dcn
Error: The global DCN is disabled.
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/20]#
[*LLIMCRVMN1W1C1ENA1_RU1273]interface GigabitEthernet0/2/21
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/21]portswitch
Error: The interface is already a L2 interface.
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/21]description HACIA_3G
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/21]undo shutdown
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/21]port link-type trunk
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/21]port trunk allow-pass vlan
550 to 555
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/21]dcn
Error: The global DCN is disabled.
[*LLIMCRVMN1W1C1ENA1_RU1273-GigabitEthernet0/2/21]#
[*LLIMCRVMN1W1C1ENA1_RU1273]
[*LLIMCRVMN1W1C1ENA1_RU1273]commit
[~LLIMCRVMN1W1C1ENA1_RU1273]
[~LLIMCRVMN1W1C1ENA1_RU1273]ip route-static 0.0.0.0 0.0.0.0 10.199.17.193
[~LLIMCRVMN1W1C1ENA1_RU1273]
[~LLIMCRVMN1W1C1ENA1_RU1273]commi
[~LLIMCRVMN1W1C1ENA1_RU1273]commit
[~LLIMCRVMN1W1C1ENA1_RU1273]dis curr
[~LLIMCRVMN1W1C1ENA1_RU1273]dis current-configuration
!Software Version V300R002C10SPC200
!Last configuration was updated at 2019-12-15 01:45:13+00:00 by root
!Last configuration was saved at 2019-12-15 01:35:40+00:00 by root
#
sysname LLIMCRVMN1W1C1ENA1_RU1273
#
set neid ac6ef0
#
info-center loghost source Vlanif190
info-center loghost 10.20.10.6
#
vlan batch 190 550 to 555
#
stp instance 0 priority 61440
stp instance 1 priority 61440
stp instance 2 priority 61440
stp enable
#
diffserv domain default
#
priority-template default
#
ip vpn-instance __LOCAL_OAM_VPN__
ipv4-family
#
undo pnp enable
#
vlan 190
description Gestion_ATN
#
vlan 550
description Trafico 2G
#
vlan 551
description O&M 2G
#
vlan 552
description Trafico 3G
#
vlan 553
description O&M 3G
#
vlan 554
description Trafico 4G
#
vlan 555
description O&M 4G
#
stp region-configuration
region-name R_CEG
revision-level 1
instance 1 vlan 2 to 2000
instance 2 vlan 2001 to 4094
#
acl number 2001
description SNMP ACCESS
rule 5 permit source 10.20.10.19 0
rule 10 permit source 10.12.35.45 0
rule 15 permit source 10.12.35.40 0
rule 20 permit source 10.20.10.26 0
rule 25 permit source 10.20.10.6 0
rule 30 permit source 10.20.10.7 0
rule 35 permit source 10.20.10.55 0
rule 40 permit source 10.15.0.43 0
rule 45 permit source 10.12.34.20 0
rule 50 permit source 10.12.34.21 0
rule 55 permit source 10.20.10.38 0
rule 60 permit source 10.12.34.30 0
rule 65 permit source 10.199.10.138 0
rule 70 permit source 10.199.10.5 0
rule 75 permit source 10.16.222.36 0
#
aaa
local-user root password irreversible-cipher $1c$]f(3Q<j7uS$!0!)8@e`\
+lj]vQx\2l&y-$M(|\n_ERFU_BF$!6X$
local-user root service-type ssh
local-user root state block fail-times 3 interval 5
local-user root user-group manage-ug
local-user clarocr password irreversible-cipher $1c$|'S3~~Nu[C$jDg-/FH|
O~TnbmP\N*F/>s,*G(Ixs*b3d`B,fOL$$
local-user clarocr service-type telnet
local-user clarocr level 3
local-user clarocr state block fail-times 3 interval 5
#
authentication-scheme default0
#
authentication-scheme default1
#
authentication-scheme default
authentication-mode local radius
#
authorization-scheme default
#
accounting-scheme default0
#
accounting-scheme default1
#
domain default0
#
domain default1
#
domain default_admin
#
interface Vlanif190
description *** INTERFAZ_VLAN_GESTION ***
ip address 10.199.17.205 255.255.255.240
#
interface Ethernet0/0/0
undo shutdown
ip binding vpn-instance __LOCAL_OAM_VPN__
ip address 129.0.0.1 255.255.255.0
#
interface GigabitEthernet0/2/0
shutdown
undo dcn
#
interface GigabitEthernet0/2/1
shutdown
undo dcn
#
interface GigabitEthernet0/2/2
shutdown
undo dcn
#
interface GigabitEthernet0/2/3
shutdown
undo dcn
#
interface GigabitEthernet0/2/4
portswitch
description HACIA_Gi0/2/1_ATN_RU1198
undo shutdown
port link-type trunk
port trunk allow-pass vlan 190 550 to 555
undo dcn
#
interface GigabitEthernet0/2/5
undo shutdown
undo dcn
#
interface GigabitEthernet0/2/6
shutdown
undo dcn
#
interface GigabitEthernet0/2/7
shutdown
undo dcn
#
interface GigabitEthernet0/2/8
shutdown
undo dcn
#
interface GigabitEthernet0/2/9
shutdown
undo dcn
#
interface GigabitEthernet0/2/10
shutdown
undo dcn
#
interface GigabitEthernet0/2/11
shutdown
undo dcn
#
interface GigabitEthernet0/2/12
shutdown
undo dcn
#
interface GigabitEthernet0/2/13
shutdown
undo dcn
#
interface GigabitEthernet0/2/14
shutdown
undo dcn
#
interface GigabitEthernet0/2/15
shutdown
undo dcn
#
interface GigabitEthernet0/2/16
shutdown
undo dcn
#
interface GigabitEthernet0/2/17
shutdown
undo dcn
#
interface GigabitEthernet0/2/18
shutdown
undo dcn
#
interface GigabitEthernet0/2/19
shutdown
undo dcn
#
interface GigabitEthernet0/2/20
portswitch
description HACIA_2G/4G
undo shutdown
port link-type trunk
port trunk allow-pass vlan 550 to 555
undo dcn
#
interface GigabitEthernet0/2/21
portswitch
description HACIA_3G
undo shutdown
port link-type trunk
port trunk allow-pass vlan 550 to 555
undo dcn
#
interface GigabitEthernet0/2/22
undo shutdown
undo dcn
#
interface GigabitEthernet0/2/23
shutdown
undo dcn
#
interface GigabitEthernet0/2/24
shutdown
undo dcn
#
interface GigabitEthernet0/2/25
shutdown
undo dcn
#
interface GigabitEthernet0/2/26
shutdown
undo dcn
#
interface GigabitEthernet0/2/27
shutdown
undo dcn
#
interface NULL0
#
undo dcn
#
ip route-static 0.0.0.0 0.0.0.0 10.199.17.193
#
snmp-agent
snmp-agent local-engineid 800007DB032841C6ACCE01
snmp-agent community read cipher %^%#`7X`/=gI%0X}-
i,ee[j.X{hsXDarDMNx^OW,"+g~ovSeCjEji)RF8{KbBj7KEftK<"0:l!'W[vSR_tW)%^%#
snmp-agent community read cipher %^
%#2(B(6s"%q##`|'7"MgtVAc+I(MukBGx)E}-]P8\W:DJPVU},>(o;gJ7,0+j.2:[|
&0my1F94YO=G;4H7%^%# acl 2001
#
snmp-agent sys-info version all
snmp-agent target-host trap address udp-domain 10.16.222.36 params
securityname cipher %^%#ESCY5Z)Ow1nU$v%n1d+~//W4OZk;sC6!,pF)zYv!%^%# v2c
snmp-agent target-host trap address udp-domain 10.199.10.138 params
securityname cipher %^%#i#qBUGkHl,`SygR99~xOR#lkA2*B#'`f7KU+R\NL%^%#
snmp-agent target-host trap address udp-domain 10.199.10.5 params securityname
cipher %^%#Vz`)W,"Bd+'H0{G%^(S/Km@#0hyShCBuK1E#'(61%^%#
snmp-agent target-host trap address udp-domain 10.255.26.8 params securityname
cipher %^%#t{"AYa\gN;%"rrV`$f<DhsWVY~&}L;b_V^E/+H=V%^%# v2c
snmp-agent target-host trap address udp-domain 10.255.26.9 params securityname
cipher %^%#}V/(RomPU*ilse8HQCi+"'kHD%DmxS#JMA9dK$$5%^%# v2c
#
snmp-agent trap source Vlanif190
#
snmp-agent trap enable feature-name system trap-name
hwSysSlaveSwitchSuccessNotification
snmp-agent trap enable feature-name system trap-name
hwSysSlaveSwitchFailNotification
snmp-agent trap enable feature-name system trap-name
hwSysClockChangedNotification
snmp-agent trap enable feature-name system trap-name hwSysReloadNotification
snmp-agent trap enable feature-name snmp trap-name authenticationFailure
snmp-agent trap enable feature-name snmp trap-name hwNmsPingTrap
snmp-agent trap enable feature-name trunk trap-name hwTrunkMemNumberChange
snmp-agent trap enable feature-name system trap-name hwSysIssuNotification
snmp-agent trap enable feature-name system trap-name
hwSysImageErrorNotification
snmp-agent trap enable feature-name system trap-name hwPatchUpdateTrap
snmp-agent trap enable feature-name system trap-name hwPatchErrorTrap
snmp-agent trap enable feature-name mstp trap-name newRoot
snmp-agent trap enable feature-name mstp trap-name topologyChange
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortStateForwarding
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortStateDiscarding
snmp-agent trap enable feature-name mstp trap-name
hwMstpiBridgeLostRootPrimary
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortRootGuarded
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortBpduGuarded
snmp-agent trap enable feature-name mstp trap-name hwMstpiPortLoopGuarded
snmp-agent trap enable feature-name mstp trap-name hwMstpiEdgePortChanged
snmp-agent trap enable feature-name mstp trap-name hwMstpiTcGuarded
#
lldp enable
#
stelnet ipv4 server enable
stelnet ipv6 server enable
ssh user root
ssh user root authentication-type password
ssh user root service-type stelnet
ssh authorization-type default aaa
#
ssh server cipher aes256_ctr aes128_ctr aes256_cbc aes128_cbc 3des_cbc
ssh server hmac sha2_256 sha1
ssh server key-exchange dh_group_exchange_sha256 dh_group_exchange_sha1
dh_group14_sha1 ecdh_sha2_nistp256 ecdh_sha2_nistp384 ecdh_sha2_nistp521
sm2_kep
#
user-interface con 0
authentication-mode password
set authentication password cipher $1c$3Y-$IK"/fR$eQ<QD6|/,>yd`<7`<!
p7Ed<iNb:IV2m-.#JhA\Z9$
#
user-interface vty 0 4
authentication-mode aaa
user privilege level 3
idle-timeout 5 0
#
return
[~LLIMCRVMN1W1C1ENA1_RU1273]dis int bri
[~LLIMCRVMN1W1C1ENA1_RU1273]dis int brief
PHY: Physical
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
(E): E-Trunk down
(b): BFD down
(B): Bit-error-detection down
(e): ETHOAM down
(d): Dampening Suppressed
(p): port alarm down
(lh): link heartbeat down
(ld): loop-detect trigger down
InUti/OutUti: input utility/output utility
Interface PHY Protocol InUti OutUti inErrors outErrors
Ethernet0/0/0 up up 0.01% 0.01% 0 0
GigabitEthernet0/2/0(10G) *down down 0% 0% 0 0
GigabitEthernet0/2/1(10G) *down down 0% 0% 0 0
GigabitEthernet0/2/2(10G) *down down 0% 0% 0 0
GigabitEthernet0/2/3(10G) *down down 0% 0% 0 0
GigabitEthernet0/2/4 up up 0.01% 0.01% 0 0
GigabitEthernet0/2/5 down down 0% 0% 0 0
GigabitEthernet0/2/6 *down down 0% 0% 0 0
GigabitEthernet0/2/7 *down down 0% 0% 0 0
GigabitEthernet0/2/8 *down down 0% 0% 0 0
GigabitEthernet0/2/9 *down down 0% 0% 0 0
GigabitEthernet0/2/10 *down down 0% 0% 0 0
GigabitEthernet0/2/11 *down down 0% 0% 0 0
GigabitEthernet0/2/12 *down down 0% 0% 0 0
GigabitEthernet0/2/13 *down down 0% 0% 0 0
GigabitEthernet0/2/14 *down down 0% 0% 0 0
GigabitEthernet0/2/15 *down down 0% 0% 0 0
GigabitEthernet0/2/16 *down down 0% 0% 0 0
GigabitEthernet0/2/17 *down down 0% 0% 0 0
GigabitEthernet0/2/18 *down down 0% 0% 0 0
GigabitEthernet0/2/19 *down down 0% 0% 0 0
GigabitEthernet0/2/20 down down 0% 0% 0 0
GigabitEthernet0/2/21 down down 0% 0% 0 0
GigabitEthernet0/2/22 down down 0% 0% 0 0
GigabitEthernet0/2/23 *down down 0% 0% 0 0
GigabitEthernet0/2/24 *down down 0% 0% 0 0
GigabitEthernet0/2/25 *down down 0% 0% 0 0
GigabitEthernet0/2/26 *down down 0% 0% 0 0
GigabitEthernet0/2/27 *down down 0% 0% 0 0
NULL0 up up(s) 0% 0% 0 0
Vlanif190 up up -- -- 0 0
[~LLIMCRVMN1W1C1ENA1_RU1273]dis int giga 0/2/4
GigabitEthernet0/2/4 current state : UP (ifindex: 10)
Line protocol current state : UP
Link quality grade : GOOD
Description: HACIA_Gi0/2/1_ATN_RU1198
Switch Port, TPID : 8100(Hex), The Maximum Transmit Unit(L3) is 1500 bytes,
The Maximum Receive Unit(L2) is 9600 bytes
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 2841-c6ac-
ce01
The Vendor PN is PTB3370-553CWLC+
The Vendor Name is NEOPHOTONICS
The Vendor Private Information is NA, Transceiver Identifier: ESFP
Port BW: 1G, Transceiver max BW: 1G, Transceiver Mode: SingleMode
WaveLength: 1310.00nm, Transmission Distance: 10km, Transceiver Type:BiDi
Rx Power: -7.07dBm, Working range: [-19.500, -3.000]dBm
Tx Power: -5.66dBm, Working range: [-7.590, -3.587]dBm
Loopback:none, Maximal BW:1G, Current BW:1G, full-duplex mode, negotiation:
disable, Pause Flowcontrol:Receive Enable and Send Disable
Last physical up time : 2019-12-15 01:18:13
Last physical down time : 2019-12-15 01:18:05
Current system time: 2019-12-15 01:47:05
Statistics last cleared:never
Last 300 seconds input rate: 11213 bits/sec, 0 packets/sec
Last 300 seconds output rate: 749 bits/sec, 0 packets/sec
Input peak rate 11229 bits/sec, Record time: 2019-12-15 00:46:58
Output peak rate 970 bits/sec, Record time: 2019-12-15 01:22:48
Input: 4412736 bytes, 2934 packets
Output: 367971 bytes, 3139 packets
Input:
Unicast: 0 packets, Multicast: 2934 packets
Broadcast: 0 packets, JumboOctets: 0 packets
CRC: 0 packets, Symbol: 0 packets
Overrun: 0 packets, InRangeLength: 0 packets
LongPacket: 0 packets, Jabber: 0 packets, Alignment: 0 packets
Fragment: 0 packets, Undersized Frame: 0 packets
RxPause: 0 packets
Output:
Unicast: 0 packets, Multicast: 1693 packets
Broadcast: 1446 packets, JumboOctets: 0 packets
Lost: 0 packets, Overflow: 0 packets, Underrun: 0 packets
System: 0 packets, Overruns: 0 packets
TxPause: 0 packets
Last 300 seconds input utility rate: 0.01%
Last 300 seconds output utility rate: 0.01%
[~LLIMCRVMN1W1C1ENA1_RU1273]q
<LLIMCRVMN1W1C1ENA1_RU1273>save
<LLIMCRVMN1W1C1ENA1_RU1273>save
Warning: The current configuration will be written to the device.
Are you sure to continue? [Y/N]:y
Now saving the current configuration to the slot 2 .
Info: Save the configuration successfully.
<LLIMCRVMN1W1C1ENA1_RU1273>
<LLIMCRVMN1W1C1ENA1_RU1273>