Beruflich Dokumente
Kultur Dokumente
Example:
200:1 Stabilizer
Press-hardening
Press-hardening helps combine the hot
forming and hardening procedures in one
process step. In press-hardening, the
500:1 steel‘s microstructure is first transferred
In the hardened and tempered state, into the austenitic range and formed by
after suitable heat treatment the manga- Example: heating at more than 950° C in a protec-
nese-boron steels form a microstructure Disk harrow tive atmosphere. While still in the mold,
consisting of 100% martensite: the pressed part is cooled to tempera-
tures between 100° C and 200° C. This
leads to the formation of a martensitic
microstructure, which results in a high
strength component.
35
grades and in different thicknesses. The
30
quality of the welded joint, however, de-
25
pends on the welding procedure, the wel-
20
ding conditions and the selection of the
15
correct filler materials.
22MnB5 26MnB5 27MnCrB5-2 30MnB5 34MnB5