Beruflich Dokumente
Kultur Dokumente
1 1
1 of 3 01/12/10 20:19
file:///Users/Punn/Desktop/A300-600/ข้อมูลAB6จากกั๋ม/AB6 E-Documents/AB6 e Learning Document/AB... 1 2
If IRS had previously been aligned on ground at the same LAT/LONG, then the ALIGN IRS prompt will not be displayed. If the LAT/LONG are changed, the
ALIGN IRS prompt is displayed.
CAUTION:
If the message "PLEASE WAIT" appears : DO NOT PRESS ANY CDU KEY until the message is cleared.
FMS data base validity ………………… Check
- Press REF key and display A/C STATUS page.
- Check DATABASE validity. Check previously defined WPT/NAVAID if any. Review stored data for deletion decision.
NAVAID DESELECTION ………………… As req
- If NOTAMs warn of any unreliable DME or VOR/DME, access NAVAID page and DESELECT the related navaid.
INIT Key ………………… Press
- INIT A page is displayed
CO RTE or city pair code ………………… Insert
- Insert company route ex. BKKCNX1 or city pair code ex. VTBD/VTCC.
INIT PAGE A ………………… Check/complete
- Check/modify ALTN/ALTN RTE.
- Enter FLT number, FLT ID (For aircraft with ATC modes).
- Enter Cost Index as per airline policy if it was not provided by the database when a CORTE was inserted.
- Enter intended CRZ FL or check it if it was already provided by database. Modify it if necessary taking into account ATC constraints or expected gross
weight.
- Enter Tropopause altitude and/or modify CRZ FL TEMP according to MET forecast.
- Enter CRZ wind.
- The IRS are usually aligned to the departure airport Reference point coordinates, however, if the gate Coordinates are published, these may be inserted
here.
ISDU ………………… Check valid coordinates
F-PLN A page ………………… Complete and check
- lf CORTE has been inserted, the F-PLN should automatically include the preferential or most probable T/O RWY, approach and landing RWY,
associated SIDs, STARs, transition and En Route WPTs. However some databases will only include departure and arrival airport idents and EN ROUTE
WPTs.
- The crew must check, modify or insert (as applicable) the F-PLN according to the data given by ATIS, ATC or MET.
- Lateral revision at Departure Airport, Select RWY then SID then TRANS (if appropriate).
- Lateral revision at WPT for ROUTE modification if needed.
- Vertical revision: check or enter speed/alt CONSTRAINTS according to ATC clearance.
F-PLN ………………… Check
2 of 3 01/12/10 20:19
file:///Users/Punn/Desktop/A300-600/ข้อมูลAB6จากกั๋ม/AB6 E-Documents/AB6 e Learning Document/AB... 1 3
- Check the flight plan versus computerized flight plan, ATC flight plan and navigation charts.
- Check Dist to DEST along the F-PLN indicated on PROGRESS page. Compare with the computerized flight plan.
F-PLN B page ………………… As req
- Enter wind/temp for waypoints as provided on the computerized flight plan. It should be remembered that the more points entered, the better the
accuracy of the FMS predictions.
SECONDARY F-PLN ………………… As req
- This is routinely a copy of the active. However, consideration may be given to the following:
a) Copy the active F-PLN but modify it at a suitable WPT for an immediate return to the departure airfield in the event of, for example, engine failure.
b) If weather is below landing minimum at the departure airfield the secondary flight plan should be that required for an immediate diversion after take-off.
c) If there the possibility of a runway and/or SID change during taxi, this can be prepared for by copying the active and making the necessary modifications.
PROG ………………… As req
- Check VOR tuned by FMS, modify if required.
- Enter BRG/DIST [ ] to the desired point. (departure RWY threshold, expected landing runway threshold in case return to land, navaids or waypoints as
required).
TACT ………………… As req
- Enter edit speed [ ] to normal climb speed [300/.78], turbulence speed [270] or [290/.78] or other speed as required.
oOo
Index
3 of 3 01/12/10 20:19