Beruflich Dokumente
Kultur Dokumente
SPS – SURF
Subsea Production Systems
Umbilicals
Risers
Flowlines
A powerhouse of leading technology companies in Norway
Subsea Valley represents some of the world’s most innovative companies in the subsea
industry located in the axis from Notodden to Oslo.
We work to strengthen our member’s competitiveness in a national and global market.
subseavalley.com
Frontpage: Below left: Source: Aker Solutions, middle: Source: EMAS AMC, right: Source: DOF.
Introduction
Moving into increasingly deeper waters has been a major trend in the development of
offshore oil and gas discoveries. Compared to fixed platform solutions, development
applying floaters and SPS-SURF solutions became increasingly important as discover-
ies on the Norwegian continental shelf (NCS) called for solutions for water depths in
excess of 200 – 300m.
Regional Director,
The Norwegian oil & gas industry met this domestic challenge through R&D, feasibility Per Hagen
studies and technology development and this resulted in innovative solutions initially
qualified for field developments on the NCS.
SPS-SURF solutions will play an increasingly important role as fields are to be developed
in deeper and more remote areas – as well as for the development of marginal fields
tied back to fixed or floating hubs covering larger areas.
Over the last 20 years Norwegian-based SPS-SURF companies has faced even bigger
challenges in international markets and, through their deliveries, been recognized as a world
class cluster. This catalogue presents the Norwegian SPS-SURF Cluster with its significant
growth of SME companies as well as ship-owners moving into marine operations.
The catalogue presents INTSOK partner companies and their competences and capabilities
in SPS-SURF as well as a matrix for a quick overview of their capabilities.
The main categories used in this capability catalogue are:
Engineering & Technical Services: Subsea and SURF technologies are highly specialized
with particular demands on engineering & technical services; covering services from
multiphase flow simulations, total system studies, pipeline and subsea architectural
design to detailed installation and tie-in studies.
Subsea Production Systems (SPS): These systems can range in complexity from a
single satellite well with one flowline tied back to a fixed platform or a floating installation,
to several wells on a template or clustered around a manifold and transferring to a fixed
or floating production facility . Subsea Production Systems include seabed located
hardware, from wellheads and X-mas trees to templates, manifolds and connection
systems for flowlines and risers, as well as potential subsea power, separation and
boosting systems. Also specialized equipment like tooling for installing and maintaining
the systems and working over the wells are included.
Umbilicals, Risers & Flowlines: The The hardware elements that are required to con-
nect the subsea systems to a fixed platform or a floating unit.
3
4
Marine
Subsea
Services
Systems
Umbilicals
Production
& Flowlines
Operations,
& Technical
Engineering
Intervention &
repair Subsea Services
Tie-ins
Tooling
Subsea
Subsea
Pipeline
Light well
Controls &
processing
Engineering
intervention
Tree systems
Measurements
Seabed surveys
Subsea facilities
power distribution
Technical services
Seabed installation
& Light intervention
Pipelaying , Pipeline
Production services
4 Subsea
ABB AS
Aker Solutions
BANDAK GROUP
Bredero Shaw Norway AS
ClampOn AS
Cranemaster (Ernst-B. Johansen AS)
CRE8 Systems AS
Deep C
DeepOcean AS
DNV GL
DOF Subsea AS
EMAS AMC
FMC Technologies
FORCE Technology Norway AS
ABB is a global leader in power and automation technologies that enable utility and
industry customers to improve their performance while lowering environmental impact.
Sustainability is integral to all aspects of our business. We strive to balance economic,
environmental and social objectives and integrate them into our daily business decisions
Technology plays a key role for ABB. We have activities all over the world working to
develop unique technologies that make our customers more competitive, while minimizing
environmental impact. ABB operates in more than 100 countries and has offices in 87 of
those countries to give its global and local customers the support they need to develop and
conduct their business successfully.
Aker Solutions is a global provider of SURF design and engineering, products, systems and
services to the oil and gas industry.
We offer the industry’s most complete portfolio of differentiated subsea technologies with
a global manufacturing and service infrastructure.
BANDAK GROUP supplies engineering services, manufacturing and deliveries for world-
leading players within oil & gas, maritime and other industries. Our customers demand the
highest level of quality, precision, on time delivery and cost competitiveness in all deliver-
ies. Bandak Group represents strong competence within engineering and high precision
machining, combined with comprehensive assembly and testing facilities. Bandak Group
includes 530 competent and skilled employees, all sharing the same core values – to be
genuine, courageous, accountable and respectful.
PRODUCTS: SERVICES:
Development of Client Products in the Offshore • Engineering
Marine Market: · Product development
Module Handling Towers, ROV Launch & Recovery · Design & Analysis
Systems (LARS), Deck Hatch Designs, Marine · Subsea & Marine Engineering
propulsion, Structural Integration in Vessel, test · Mech. & Structural Engineering
jigs and lifting/transport frames, LNG technology, · Third Party Verifications
Taut Wire System • Machining
· CNC milling & Turning
Development of Client Products in the Oil & Gas · Grinding & Bucking services
Subsea Market: • EPC-deliveries
SUBSEA ENGINEERING
PIPELINE ENGINEERING Large subsea structures, subsea valves, connection · Pipeline products
TECHNICAL SERVICES products, thermal insulation caps, high pressure · Rotary tables for XT and Swivels
SUBSEA FACILITIES caps w/metal seals, cleaning tools, stroking tools, · Swan necks w/ vertical connection
TOOLING
XT tools, mechanical leveling jacks for large subsea
• Welding
RISERS, FLOWLINES & TIE-INS structures, vertical connection w/swan necks.
· Structural welding
· Clad-welding
Development of BANDAK Products, complemen-
tary to client products in the Oil & Gas Subsea
• Surface Engineering
· HVOF
Market:
· PTA & Plasma Spraying
• Torque Tools (200 kNm – 800 kNm) for large • Assembly & Testing
subsea ball valves · Excellent crane facilities
• Pressure & Protection Caps · Total assembly area 2000m²
• Transport & deployment skids · Large Seawater Test Pit
• Soft Landing Cylinders · Thermal cool-down test facilities
• Levelling Jacks for subsea structures · Load Test & drop test
• Valve & Metallic Seal Technology · Functional and qualification testing
• Bolt Make Up Tool for flanges
SELECTED REFERENCES:
Development of client products in the Renewable Statoil, FMC Technologies, Aker Solutions, GE Oil &
Energy Market: Gas, Rolls-Royce Marine, Aibel, Technip, Hammerfest
Tidal Turbines, seals for hydropower ball valves Strøm, Kongsberg Maritime, Ulmatec, Seaonics.
Bredero Shaw is the global leader in the development and manufacture of pipe coating
solutions for the oil, gas, and water industries. Bredero Shaw has more than 75 years of
Company name: Bredero Shaw Norway AS
experience, over 27 pipe coating facilities on 6 continents and the largest team of techni-
calContact
and service specialists
person: Eirik Simonsen in the business. Bredero Shaw offers technologically advanced
Title General
solutions forManager/VP Global Flow
anti-corrosion Assurance protective and weight coatings, thermal flow assur-
coatings,
E-mail address: esimonsen@brederoshaw.com
ance coatings, internal coatings, custom coatings and field joints for both onshore and
offshore
Companyapplications.
website: www.brederoshaw.com
COMPANY DESCRIPTION:
PRODUCTS: • A wide
Bredero Shaw is the global leader in the development and manufacture array
of pipe of coating
coating solutions solutions ranging
for the oil, gas, from
and water
Ourindustries.
productBredero
rangeShaw
for Offshore Pipelines,
has more than 75 years Field small
of experience, over diameter
27 pipe flowlines
coating facilities on 6and risersand
continents to the
large
largest
Joint
teamand Subseaand
of technical structures are: Anti
service specialists in theCorrosion diameter
business. Bredero Shaw transmission
offers technologically lines.
advanced The company
solutions for anti- has
Coatings,
corrosion Concrete Weight
coatings, protective andCoating, Thermal
weight coatings, coated
thermal flow assurance pipelines
coatings, internalfor the most
coatings, customdiverse
coatingsdepth,
and field
Insulation andonshore
joints for both Internaland coatings.
offshore applications. environment and installation conditions.
PRODUCTS:
SERVICES: SELECTED
Our product range for Offshore Pipelines, Field Joint and Subsea structures REFERENCES:
are : Anti Corrosion Coatings, Concrete Weight
Bredero Shaw
Coating, understands
Thermal Insulation andtheInternal
offshore environ-
coatings. Bredero Shaw has supplied services to all major
ment and is capable of providing complete coating offshore markets in the world and some key
SERVICES:
solutions on a global basis. As the leader in off- projects are:
• Bredero Shaw understands the offshore environment and is capable of providing complete coating solutions on a global basis.
RISERS, FLOWLINES & TIE-INS
shoreAspipe coating
the leader solutions,
in offshore the company
pipe coating offers
solutions, the Åsgard,
company offers manyKristin, Tyrihans,
advantages Gjøa, Mars, Europa,
including:
many advantages including: Madison, Marshal, Thunderhorse, Skarv, Pluto,
• Complete solutions for all applications including anti-corrosionBonga, Pazflor,
protection, thermalKizomba, Oseberg,
flow assurance, Ormen
protective lange,
and weight
coating, internal
• Complete solutionsflow for
efficiency and custom coating
all applications including Langeled, Blind Faith, Block 31, Mafumeira Sul,
anti-corrosion
• A wide array ofprotection, thermal
coating solutions rangingflow
fromassur-
small diameter In-Salah,
flowlines andGoliat, Skuld,
risers to Visundtransmission
large diameter Sør/Nord, lines.
Svalin,
The
ance, protective
company andpipelines
has coated weightforcoating, internal
the most diverse Åsgardand
depth, environment Subsea Compression,
installation conditions. Vigdis, Tordis
flow efficiency and custom coating Replacement
REFERENCES:
Bredero
BrederoShaw hassupplied
Shaw has supplied services
services to alloffshore
to all major majormarkets
offshore markets
in the insome
world and the world and some key projects are:
key projects are:
Linepipe and Field Joint Insulation for Reeling Linepipe and Field Joint Insulation for S-‐lay Linepipe Insulation
Portable plant technology Custom Coating for Anode joints Concrete Weight Coating
Insulation of Valve body in Polypropylene Insulation of Tie-‐Inn connector Insulation of Bends
Subsea Corrosion-Erosion
Monitor (CEM®) Pre-installable
version, first picture showing the
CEM without insulation, second
picture, CEM with insulation.
Third picture: Subsea Vibration
Monitor, stand alone version.
PRODUCTS: SERVICES:
CRE8 is a key partner with an unrivalled level CRE8 deliver innovative new technology to the
of service and support to our customers within market and is directly contributing to the success
engineering and production of Electro/Hydraulic of our customers objectives by using standardised
systems and services for both Topside and and modular technology. Our team has worked
Subsea applications. together for many years and is capable of execut-
ing the most complex systems within our line of
Typical Products: business and our expertise includes:
• Intervention & Workover Control Systems
• Hydraulic Power Units • HSE-QA
• Subsea Control Modules Test Stand • Engineering and Studies
• Wellhead Control Panels • Design, Lay-out, Structural Calculations
• Local Control Panels • Project Management
• Test & Flushing HPU • Supply Chain Management
• Hydraulic & Electric Distribution Panels • Production Facilities
• Hydraulic Termination Panels • Testing Facilities
TREE SYSTEMS • X-mas Tree Instrumentation • Courses, Training
CONTROLS AND MEASUREMENT
• Umbilicals incl. Stab Connection Plates • Commissioning
• Hydraulic Accumulation Units
SELECTED REFERENCES:
The CRE8 team is within it`s area the most expe-
rienced in Norway and have references to most of
the large international Engineering and Oil & Gas
Companies.
Deep C is a seabed intervention specialist, providing superior turn key solutions to meet
the needs of even the most demanding projects. Our capabilities are successfully demon-
strated through an impressive track record. Being a specialist, means that Deep C offers
solutions which combine the best of seabed intervention technologies, operational know-
how and in-depth engineering experties.
PRODUCTS: SERVICES:
• Deep C Subsea Utility Vehicle • Seabed Intervention
· Versatile and powerful tracked vehicle for · Levelling and precision dredging
dredging, subsea HP jetting, inspection and · Rock dump Removal
subsea tooling operations · Umbilical trenching
• Mass Flow Excavation · Free span rectification
· Deep C Blower · Spudcan preparations
· Deep C Jumbo Dredge · Boulder removal
• Dredging & Trenching · Drill cut transportation
· ROV Trenching · High pressure jetting
· ROV and diver operated dredges • Engineering
• Cutting & Jetting · Geotechnical assessment
· Diamond wire cutting · Remote intervention technology
SEABED SURVEYS &
LIGHT INTERVENTION · Subsea HP Jetting solutions · Operational procedures and methods
SEABED INSTALLATION • Equipment tool pool · Design and fabrication
PIPELAYING, PIPELINE REPAIR
· An extensive rental tool pool of ROV tooling
and subsea equipment REFERENCES:
Shell, Subsea 7, Technip, EMAS, Saipem, Deep
Ocean, DOF Subsea, Bibby Offshore, Harkand
Group, Reach Subsea, Canyon Offshore, Nexans
DeepOcean is an integrated provider of safe, high quality, innovative services and technolo-
gies for the subsea industry. Demonstrating an extensive track record, DeepOcean offers a
breadth of subsea services, including (a) Inspection, Maintenance, Repair and Replacement
(IMR2), (b) Survey and Seabed-mapping, (c) Subsea Installation (SURF), (d) Seabed
Intervention, and (e) Decommissioning.
Driven by our purpose of safeguarding life, property and the environment, DNV GL enables
organizations to advance the safety and sustainability of their business. Operating in more
than 100 countries, our 16,000 professionals are dedicated to helping our customers in
the maritime, oil & gas, energy and other industries to make the world safer, smarter and
greener.
In the oil and gas industry, DNV GL enables safe, Subsea services: Qualification of new technol-
reliable and enhanced performance in projects ogy, performance assurance, verification, quality
and operations. We provide integrated services in surveillance, certification of material and compo-
technical and marine assurance and advisory, risk nents, integrity management, lifetime extensions
management advisory and offshore classifica- and requalification, fatigue failure and laboratory
tion. Our 5,500 people combine industry expertise, testing, risk assessment and risk management,
multi-disciplinary skills and innovation to solve flow assurance and sand management.
complex challenges for our customers. Together
with our partners, we drive the industry forward by Drilling and well services: Qualification of new
developing best practice and standards across the technology, verification, quality surveillance,
asset lifecycle. integrity management, lifetime extensions and
requalification, independent design analyses,
PRODUCTS: fatigue failure and laboratory testing, risk assess-
SUBSEA ENGINEERING
PIPELINE ENGINEERING Rules, Standards and Recommended Practices: ment and risk management.
TECHNICAL SERVICES DNV GL has developed rules and standards for
ships for more than 140 years, and is a world lead- Pipeline & Risers services: Design verification,
ing classification society. We also develop rules independent design analyses, installation analy-
and standards for the oil and gas industry: DNV / ses, quality surveillance, integrity management,
DNV GL Standards such as DNV-OS-F101, DNV- lifetime extensions and requalification, certification
OS-F201 & DNV Rules for Planning and Execution of material and components, qualification of new
of Marine Operations as well as associated technology, fatigue failure and laboratory testing,
Recommended Practices. flow assurance and sand management.
DOF Subsea is a leading provider of integrated subsea solutions to the offshore oil and gas
industry around the world. Headquartered in Bergen, the company owns and operates one
of the largest global fleets of high-specification vessels, dive systems and ROVs, providing
specialist survey, subsea construction and inspection, repair and maintenance services
worldwide.
Our fleet currently stands at 23 owned, and 5 management, engineering, and fabrication. ROV/
long-term chartered offshore construction vessels, ROTV operation, AUV & survey operation and
56 ROV systems including 1 AUV/IIV system, and processing of data during vessel operation. Final
10 diving spreads, with a further 12 ROVs and one reporting, inspection and project close-out reports.
AUV on order.
With close to 1,700 employees worldwide, DOF SERVICES:
Subsea has a skilled and experienced team who • IRM
provide clients with a world-class capability to • Mooring design and installation services
deliver project managed and engineered subsea • Seabed survey
solutions. Our team’s ability to match services, • Subsea metrology
expertise, and equipment to the requirements of • Pipeline and structure inspection
individual operations underpins our reputation for • Module Handling
safe, efficient and cost effective project delivery. • ROV and intervention services
SEABED SURVEYS &
LIGHT INTERVENTION We have centres of operation in the North Atlantic, • Diving and intervention services
SEABED INSTALLATION Gulf of Mexico, Brazil, Asia, Mediterranean and • Construction support
PIPELAYING, PIPELINE REPAIR
West Africa with a skilled team including engineering, • Subsea engineering
project personnel, and marine crew. • EPCI Contractor services
EMAS AMC is a specialized subsea installation and marine services company with differen-
tiated assets, delivering integrated solutions to the offshore energy industry worldwide.
FMC Technologies, Inc. (NYSE: FTI) is the global market leader in subsea systems and
a leading provider of technologies and services to the oil and gas industry. We help our
customers overcome their most difficult challenges, such as improving shale and subsea
infrastructures and operations to reduce cost, maintain uptime, and maximize oil and gas
recovery. Named by Forbes® Magazine as one of the World’s Most Innovative Companies
in 2013, the company has approximately 20,000 employees and operates 28 production
facilities in 17 countries.
FORCE Technology offers varied advanced solutions within oil and gas, focusing primarily
on servicing the offshore industry.
Freudenberg Oil & Gas Technologies (FO>) is a global solutions provider of innovative
seal solutions and differentiated seal products to the global oil and gas industry. The
company is focused on the exploration and production (upstream) segment, and acquired
Vector Technology Group in January 2013. Our 620 associates serve a wide range of cus-
tomers including oil and gas producing companies, original equipment manufacturers (OEMs)
and engineering and service companies that provide technologies, equipment and services
for producing oil and gas from land based and offshore platforms throughout the world.
Our core business is supplying cost-effective, MUDRISE™ - Subsea mud & slurry pumps for
compact and highly robust pumps that are mud-return, deep sea slurry and subsea mining
designed to avoid leakage-to-sea and function SEARISE™ - Subsea seawater pumps for dredging,
independently of any topside support system trenching and ejector applications
(“topside-less”).
SERVICES:
We have delivered several subsea pumps to date, of Engineered pump solutions to fit the client’s need
which more than 20 pumps are in active use in the is our specialty. We also provide services including
deep seas. Our involvement in subsea pump qualifi- process and dynamic analysis.
cation projects includes the participation of a variety
of oil service companies and western oil majors. We engineer both positive displacement and cen-
trifugal pumping systems for subsea. Often, our
One of the key projects involves the world’s first starting point is often already proven technology.
SUBSEA PROCESSING
TOOLING seal-less subsea process pump, Magrise®. End We subsequently improve the weak links system-
users involved in qualifying this pump include atically in existing solutions, typically related to
Statoil, Total, Shell & Chevron. sealing, bearings, material science, thermal and
lubricating systems.
PRODUCTS:
Key markets and applications include: Our core competencies include:
• Subsea excavation: Deepsea dredging, trench- • Marinization – Making equipment robust and
ing, mining & decommissioning reliable in the deep oceans
• Subsea drilling: Deepsea cuttings transport, • Material science
drilling mud return, and drilling mud pressure • Finite Element Analysis
control • Thermodynamics
• Subsea process: Single & multiphase boosting, • Rotodynamics
chemical injection, water injection, active cool- • Computational Fluid Dynamics
ing, filtration • Tribology
Hitec Products AS’ main business areas are high quality Electro-Hydraulic control systems
and Chemical Injection to the Oil & Gas Industry. We are organised in four divisions;
TOPSIDE SYSTEMS, SUBSEA SYSTEMS, OILFIELD SYSTEMS and CUSTOMER SUPPORT.
We are a project oriented organisation and our employees have a culture for succeeding
and exceeding our clients expectations. Our production facilities are in Stavanger, Sandnes,
Forsand and Singapore, including a deepwater quay and facilities for large module assembly.
We are also present in Telemark, Norway and Lowestoft, UK with sales and engineering offices.
IK provides services, products and solutions to the Subsea IMR, MMO and SURF sector. We
are specialists in the area of subsea remote repair and reinforcement solutions on struc-
tures and pipelines, both temporary as well as permanent solutions.
IKM Testing is a company within the IKM Group and a multidiscipline supplier to the
International Oil & Gas Industry. IKM Testing was established in 1992 and is today a global
supplier within Pre-Commissioning and Commissioning Services both to the onshore and
the offshore industry.
Institute for Energy Technology (IFE) is an independent research institute for energy and
nuclear technology. The institute has a permanent staff of 550 and an annual turnover of
about 125 MUS$. Within petroleum technology IFE has expertise in reservoir tracer studies,
multiphase transport, corrosion control, and control room engineering. More than 80% of
the turnover is financed by industry and more than 50% is financed by international clients.
KONGSBERG supplies a unique range of software solutions, services and subsea infrastructure
covering the entire lifecycle of oilfields and enhances performance and operational efficiency by:
-Integrating subsea products, decision support and engineering services for optimal solu-
tion performance
-Integrating solutions across vendors and systems through dedication to industry standards
-Integrating across multiple locations and assets for an enterprise-wide overview.
PRODUCTS: systems, subsea clamps, ROV tools, intervention
Subsea Engineering & Services from conceptual and handling equipment, pressure balanced weak
definition, design and construction, through to links,subsea coolers.
operation, field development and system engineer- Production Assurance Solutions include the
ing. Pipeline, flowline, riser and umbilical engineer- K-Spice® engineering simulator, operator training
ing, SURF installations analysis and procedures. simulators, real-time dynamic multiphase flow
Subsea Products & Integrated Systems from simulators and LedaFlow® transient multiphase
the flange of the tree to the topside hang-off; flow simulator. Drilling & Wells Solutions include
manifolds/structures, Subsea Storage Units SiteCom® real-time data aggregation and visual-
(SSU), tie-in systems (incl. our Thor horizontal ization software and Riser Management System.
tie-in), hot tap tees/systems, in-line tees and Rig Manager® is asset, operations and personnel
wyes, pig launchers/receivers, subsea safety management software.
SUBSEA ENGINEERING
PIPELINE ENGINEERING SELECTED REFERENCES:
TECHNICAL SERVICES
PRODUCTION SERVICES Flexible pipe and umbilical analysis recent list FlexStress project reference List
CONTROLS AND MEASUREMENT • Statoil Johan Castberg Riser System Concept • ExxonMobil multiple projects
SUBSEA FACILITIES • Statoil Gjøa and Vega verification • Statoil Gjøa
SUBSEA PROCESSING
TOOLING • Statoil Njord Future • Talisman Varg
RISERS, FLOWLINES & TIE-INS
Riser Integrity Management (RIM) recent list Hardware delivery reference list:
• Statoil RIM frame agreement (Åsgard A, B & C, • Statoil Polarled FSP (Foundation Slide Plate),
Kristin, Norne, Njord A&B, Heidrun) PLEM, PLR (Pig Launcher Receiver), Blind Cap,
• Statoil Peregrino RIM frame agreement Laydown Joint, In Line Tees, Dewatering system
• ExxonMobil RIM Jotun, Balder, MEGI with THOR horizontal tie-in
Pipeline Engineering reference list: • Statoil/EMAS Smørbukk South Extension
• Statoil Johan Castberg Extened Concept and Replacement Spools with integrated PLET
pre-FEED studies • Statoil/Ocean Design Gina Krog/Eirin Riser Base
• ONGC/Aker G4, D and E Field development w/cover, 20 inch Subsea pig launcher/ receiver
• Centrica/Aker Fogelberg Pipeline concept study • Pig Launcher & Receivers: Technip (Gjøa,
Ekofisk, Yme,) Acergy (Ormen Lange),
Subsea7(Vega)
• RMS More than 20 systems delivered
Multiconsult has been involved in oil & gas projects in Norway and abroad for over 40 years.
We have developed leading expertise in design, engineering and follow up of execution
and installations for both on- and offshore projects. Our expertise covers civil, geotechnic,
design of sophisticated concrete and steel structures as well as multidiscipline engineering
including special services for offshore structures and floaters and onshore plants according
to NORSOK requirements. Our specialized services within marine geotechnical and arctic
technology comprising cold climate engineering and offshore ice simulations are recog-
nized on a world class level. Our expertise is based on heavy involvement in R&D projects.
The harsh climate along the Norwegian coastline and offshore in the arctic areas poses
challenges which have required technology development in many areas. Multiconsult has
been heavily involved in challenging projects and technology development in this area.
Nexans Norway AS is one of the world’s leading suppliers of subsea umbilicals and high-
voltage submarine cables, and is the leading supplier of power and telecommunications
cables in Norway. Nexans Norway AS develops, manufactures and markets submarine, land
and offshore umbilicals, and cables for power and telecommunication transmission. The
company also markets cables manufactured by NVC in Japan, a production company which
is a joint venture between Viscas and the Nexans group.
Nexans Skagerrak AS is a wholly owned subsidiary adapted to harsh North Sea conditions.
of Nexans Norway AS. Nexans Skagerrak AS is Nexans has qualified control umbilical and power
engaged in transport, laying and installation of umbilical for 3000 meters water depth, and aims
submarine power cables and owns the cable beyond this.
laying vessel C/S Nexans Skagerrak.
Nexans provides complete EPC (engineering,
Nexans Norway’s plants are located in Namsos, procurement and construction) umbilical solutions
Rognan, Karmøy, Halden and Langhus and the from engineering to manufacturing and the qualifi-
company’s head office is in Oslo. Nexans Norway cation and testing.
has approx. 1,500 employees.
SERVICES:
Nexans Norway AS is part of the French Nexans Nexans provide installation services with its fully
UMBILICALS & CABLES
group – one of the world’s largest cable manu- owned installation vessel Skagerrak, and trenching
facturers - and the company is a wholly owned services with the ROV based CAPJET.
subsidiary of Nexans participations SA in Paris.
SELECTED REFERENCES:
PRODUCTS: Among our references are Julia, Åsgard, Jack/St.
Nexans has worked with cables for 100 years, and Malo, LagganTormore, Atlantis, Thunder Horse,
has more than 25 years experience as a manu- Mexilhao and Usan.
facturer of umbilicals for the offshore industry Read more on www.nexans.no/umbilical
Nymo is a full-service engineering, procurement and construction company within the oil
& gas and process industry. Nymo offers total solutions to customers and has earned con-
fidence for versatility, reliability, quality service, timely delivery, good project management
and commitment to HSE excellence.
Nymo has extensive experience and expertise in units are delivered mainly for the Norwegian con-
fabrication of subsea facilities. tinental shelf. Most known fields delivered to are
Troll Oil Province in the North Sea and Snøhvit Gas
PRODUCTS: field in the Barents Sea. Detail engineering is avail-
Our staff is well experienced in detail design, able for structural and piping disciplines. Special
procurement of materials, fabrication and testing subsea platforms with depth of 10 m and 30 m are
of complete units for seabed installation. The fab- available for submerged testing. Overhead lifting
rication skills include all relevant material qualities capacity of 220 MT.
used in subsea equipment.
SELECTED REFERENCES:
Units delivered: Some major projects:
• Manifolds for multi well field developments • Tordis, EPC contract subsea manifold
• Satellite production wellhead frames • Snorre B, Fabrication of subsea manifold and
• Injection wellhead frames structures
SUBSEA FACILITIES
SUBSEA PROCESSING • Seabed compression unit • Troll Olje, Fabrication of 23 off manifolds, 5 off
• Tie-in spools riser bases and 5 off satellites
• Well jumper kit • Snøhvit, 6 off template manifold subsea
• BP Angola Block 18, Well jumper kit fabrication
SERVICES: • Alvheim, Manifolds and Riser bases
Nymo has since 1990 fabricated subsea struc- • Yme/Gjøa, subsea tie-in spools
tures and piping systems for subsea production • Bøyla, Manifold and structures
and injection wells. In total number approx 100 • Boa Manifold
PG Flow Solutions (Ing. Per Gjerdrum AS) has delivered innovative and tailor-made pump
solutions to the offshore and marine markets in more than 30 years. Based on pump knowl-
edge and experience, as well as high-quality sub-suppliers and numerous pump start-ups
and services, the Oslo-based company is expanding activities to cover worldwide deliveries
of a challenging and new subsea liquid pump solution.
RAE Energy is a revolutionary service provider in the Oil and Gas industry differentiating
ourselves through a passion for service and quality. We specialize in multiple disciplines
including Pipeline and Facility Construction and Integrity Services alongside Pipe and
Custom Coating and Fabrication Solutions. The core to our service delivery is through
Welding, Inspection and Coating. Decades of experience around the world have culminated
into best in class service through innovation and attention to detail. From our leadership
team all the way to our onsite personnel we have a passion for service, quality and safety.
PRODUCTS: Welding:
RAE Energy provides the complete solution for • Mechanized and Manual Welding Equipment
Spoolbases, Vessels and Pipelines, both onshore and Personnel
and offshore for Welding, Inspection & Coating. • Fabrication Solutions
Our Inspection equipment is led by our UT Quality • Cladding Technology
brand, where our AUT devices are designed and • Firing Line Management
manufactured in North America and serviced at And more
our global locations. Our coating team designs
their own equipment and chemical formulations Inspection:
to ensure material properties and applications are • Advanced Weld Inspections
TECHNICAL SERVICES
within the operators and manufacturers’ specifica- • Patented AUT System, UT Scan®
tions and expectations • Conventional Non-Destructive Testing
• Ultrasonic Testing (UT)
SERVICES: • Radiographic Testing (RT)
At RAE Energy, we prides ourselves on having And more
highly specialized technicians to deliver a suc-
cessful project every time. On top of providing Coating:
Pipeline and Facility Construction and Integrity • Anti-Corrosion Coating
Services alongside Pipe and Custom Coating and • Mechanical Joint Protection Coating
Fabrication Solutions, we provide a full suite of • Thermal Insulation Coating
Welding, Inspection and Coating services to deliver And more
a complete solution to our clients:
SELECTED REFERENCES:
RAE Energy has decades of experience working
over 1,200 global projects in over 27 countries. We
have worked in every corner of the world and with
every major contractor.
Reinertsen AS is a family owned company supplying studies, FEED and EPCI projects to the
Oil & Gas and industry. The company was established in 1946.
Sandvik Norge AS, branch Riser Technology design and manufacture the brand Sandvik
ClikLoc® connector and riser tubes to be used within well completion and intervention
work. Sandvik Norge AS is a part of Sandvik Material Technology AB who is a world leading
manufacture of high value-added products in advanced stainless steel and special alloys.
SELECTED REFERENCES:
When performing production well cleanup opera-
tion to a semi submersible drilling rig a landing
string system is connected to the wellhead. Using
traditional technology, the last connection of the
landing string is made by rotating the assembly
above the surface flow tree or use flange connec-
tion who is time consuming.
BP Norway at BP SKARV and Marathon Norway at
ALVHEIM choose to use the Sandvik ClikLoc™. The
customer’s concludes: “Overall we have been very
pleased with the connector. It has certainly made
connecting the surface flow tree assembly and
above equipment much simpler and safer than
other connection.”
The largest foreign operator in Norway continental
shelf was looking for a safer and time saving alterna-
tive to the conventional rigging of coil tubing stack
up risers. Conventional rigging of a 30-meter tall
riser tower involves more than 900 potentially falling
objects. One single bolt can weigh as much as 4 Kg.
The patented SWIT® technology enables injection of sea water treated to any desired
specification including low salinity water directly on the seabed. The most flexible and cost
effective solution. The technology, enables a step change in reservoir and asset manage-
ment, accelerating production and increasing recovery. Total investments and cost of
production facilities will be significantly reduced.
PRODUCTS AND SERVICES: Project (JIP) companies verified the results and
The SWIT® technology offers a different approach technology is ready to be used in field applica-
to how reservoir and assets are managed and tions. SWIT® has been approved via technology
produced. Cleaning the surrounding sea water at qualification program with major oil companies
the seabed and feeding directly into subsea injec- and is currently being considered in a number of
tion wells or to a platform or floater is a completely projects globally.
different concept than the traditional topside In 2013 another JIP was successfully completed
approach. The benefits are significant from many proving that SWIT® feeding membranes make
aspects; reduced weight and area required top- membranes last very long without any degrada-
side; no long reach platform water injectors (WI) tion in performance or maintenance requirement.
required; acceleration of production; increased A new JIP started fall 2014, taking the final step
recovery through flexible and phased deployment to a fully integrated subsea SWIT® + membrane
of the WI capacity required. facility, enabling low sulphate and low salinity
SUBSEA FACILITIES
SUBSEA PROCESSING A total of 24 months full scale pilot testing has water injection from seabed as well.
been conducted in the Oslo fjord. The SWIT®
cleaned water was pumped to shore to NIVA SELECTED REFERENCES:
Marine Research Centre for monitoring and test- ExxonMobil, Az ACG Ltd (The State Oil Company of
ing. The results exceeded expectations and docu- the Azerbaijan Republic - SOCAR), Chevron, Shell,
mented superior water quality for WI compared Statoil, Total, ConocoPhillips, Wintershall, Lundin,
to traditional topside facilities. The Joint Industry GdF, Suncor)
Siemens Subsea is one of the leading providers of subsea power supply and distribution
systems, including the solutions experience for configuring complex power transmission to
Enabling Subsea multiple subsea consumers. Beyond power and distribution, our portfolio of subsea prod-
ucts and systems covers a broad spectrum of applications. Backed by extensive mariniza-
Processing by
tion expertise and a variety of exemplary life-cycle management and service support offers,
Connecting
Siemens provides answers at every phase of the development of the field.
Innovation with
Experience SUBSEA PRODUCTS: • Hydraulic/electric flying leads
Subsea products for customized solutions with a • High-Power Changeover Switch (HPCS)
portfolio of market-leading brands such as Tronic, • Anguila Cobra Head
Matre and Bennex. • Subsea Distribution Unit (SDU)
Matre sensors, transmitters and instruments for Siemens Subsea Power Grid: Powering installa-
monitoring subsea operations conditions tions on the seabed – down 3000 meters
• Wellhead Pressure Sensors (WEPS) With the Subsea Power Grid, a supply and distribu-
• Pressure Temperature (PT) sensors tion system, we are combining our high R&D focus
• Differential Pressure (DP) sensors for subsea and broad subsea power concept experience with
applications our extensive marinization expertise. Currently
• Flow measurement undergoing the detail design and test phase, it
incorporates proven high-quality Siemens indus-
Bennex subsea power and signal distribution trial components that include subsea transform-
products ers, switchgear and variable-speed drives.
Equipment for power solutions, fiber-optic and
seismic applications; electrical and optical LIFE CYCLE MANAGEMENT:
subsea distribution systems; jumpers and cable Siemens is fully backing its subsea commitments
terminations. by offering qualified service technicians and
• Anguila subsea distribution system exemplary service and support. Our strong global
• Anguila Advanced Cable Termination (ACT) presence with state-of-the-art facilities on four
• Anguila Advanced Fiber Termination (AFT) continents allows proximity to our customers and
• Fiber-optic penetrator ensures that service needs are met locally.
Services Capability
• EPIC contracting • Pipelay fabrication Technology
• Engineering design · Rigid • Riser Systems
• Project management · Bundle · Single and Hybrid Riser
• Pipeline design, fabrication • Pipelay installation · Towers (HRTs)
and installation · Rigid reel-lay · Steel Catenary Risers (SCRs)
• Life of Field · J-lay S-lay Flex-lay Buoy-Supported Risers
• Inspection, Repair and · Bundle-lay (BSRs) Grouped Single Line
Maintenance (IRM) Integrity • Construction Offset Risers (SLORs)
management Remote inter- · Fleet capacity and flexibility • Pipelines
vention Diving · Lift and storage · Bundles
• Fabrication optimisation · Pipe-in-Pipe (PIP)
• Fleet provision • Diving services and remote · Electrically Trace Heated PIP
• Remotely Operated Vehicles intervention • Materials and welding
(ROVs) · Diving · High-strength steel
• Intervention and drilling · Remotely Operated Vehicles · Corrosion-resistant alloys
support (ROVs) (BuBi®)
• Heavy lift · Composites
· Up to 5,000 tonnes • Remote intervention
· Autonomous Inspection
Vehicles (AIVs)
· Sensors
In Subsea North we focus on emerging upstream markets. We improve the running services
and the value chain by reuse and interaction between the best players. In complex markets,
we need to cooperate and share:
The company is located in Stavanger and our strength comes from our partners and mem-
bers. Our customers and clients gain more then they give or pay for.
If energy were easy, there would be no need for a company like Technip. We work with our
clients, today and tomorrow, wherever they are, to bring energy to the World. We will con-
tinue to contribute to their success through our constant customer focus and our integrated
and sustainable project approach.
PRODUCTS:
Technip’s mission is to deliver safe and suc- Rigid steel pipelines for installation by the reel
cessful energy projects across the World for the method in sizes up to 16” OD (18” from 2013), with
benefit of all our stakeholders. ‘Take it further’ a unique
is our approach to business, partnerships and track record in the welding of exotic materials
aspirations. It conveys the unique message that (13%Cr, Clad, Lined) and fabrication of highly
Technip intends to excel in what we do, suc- insulated passive Pipe-in-Pipe systems and
ceeding together, exceeding expectations and the newly developed Electrically Trace Heated
innovating continuously. Within the domain of (ETH-PIP) system. Flexible flowlines and risers
subsea hydrocarbon field development, Technip’s in sizes from 2” to 18” ID for design conditions
main focus area in Norway, our activities cover the matching water depths and oil and gas production
design, manufacture and installation of rigid and profiles for the most severe subsea developments.
flexible subsea pipelines and umbilicals. Technip Flexible manufacturing plants in France, Brazil
is a key integrated player in this market thanks and Malaysia. Customized umbilical systems for
to our portfolio of state-of-the-art subsea pipe subsea development projects, with manufacturing
SUBSEA ENGINEERING technologies and our industrial and operational plants in Great Britain, United States of America,
PIPELINE ENGINEERING
assets. Technip’s workforce in Norway comprises Angola and Malaysia.
UMBILICALS & CABLES ~700 employees out of ~40,000 worldwide, is split
RISERS, FLOWLINES & TIE-INS between the main office in near Oslo and offices in SERVICES:
SEABED SURVEYS &
Stavanger and Haugesund. Since the mid 1990s Our core business is to provide engineering, pro-
LIGHT INTERVENTION Technip in Norway has been playing a leading role curement, construction and installation services
SEABED INSTALLATION
PIPELAYING, PIPELINE REPAIR
in the development of subsea fields, including the for subsea and offshore projects. Within subsea
infield transportation and flexible riser systems this includes tie-backs, subsea construction,
essential for the development and implementation flowline installation, flexible riser and flowline
of subsea and floating production facilities. The supply, marine operations, diving and inspection
Technip spoolbase in Orkanger is specialized in maintenance and repair (IMR) activities. Through
the welding of exotic pipeline materials and the the investments in offshore competencies, such
fabrication of high specification pipelines, such as as the strategic agreement with KANFA and
both Passive and Electrically Trace Heated Pipe- majority stake in Inocean, Technip in Norway is in
in-pipe systems and HDPE lined water injection the process of building a significant competence
flowlines, and has delivered many hundreds of base on the design and engineering of offshore
kilometers facilities for service on the Norwegian Continental
of infield flowlines for installation by reeling on the Shelf (NCS) and worldwide offshore construction
Norwegian Continental Shelf. with an extensive fleet of specialized vessels.
SELECTED REFERENCES:
For references within any of the various fields of
competence in Technip please check the internet
site given above or contact the Director for Sales
and Business Development for Technip in Norway
at the email address stated.
Your worldwide partner for safe- and efficient under water work.
PRODUCTS: SERVICES:
Under water paint. Together with Lestin ag in Special Periodic Surveys (SPS), Underwater
Austria, we present the only functional under water inspections, Thruster replacement/work/change-
epoxy paint, applied by our divers carrying brush outs, Structural repairs and upgrades (uw welding,
and bucket under water. The product applied sandblasting and painting), Anode replacement
guarantee a strong adhesion and quality totally pre- in wet or dry conditions, Blinding of valves and
venting corrosion for years. The product is tested sea chests, Overhaul of valves, Hull cleaning and
by DNV GL and used both for sealing purposes as polishing, Pulling of Tail shaft, Underwater engi-
well as for preventing corrosion on semis, ships and neering, Equipment – Dry habitats
quays worldwide.
SELECTED REFERENCES:
Techno Dive is approved by all major class societies
as DNV GL, ABS, Bureau Veritas Norge and Lloyds.
And we are approved supplier to Statoil, BP, Shell and
rig owners Transocean, Noble, Seadrill, Dolphin etc.
Headquartered in Drammen, Norway, TESS is one of Europe’s leading hose service compa-
PSF
nies. Since 1968, engineering and hose management solutions have increased uptime and
safety levels in the oil & gas, subsea and maritime industries. Today with more than 110
service centres worldwide, TESS annual sales exceeds NOK 2.4 billion/EUR 312 million/
USD 340 million.
ENGINEERING & SYSTEMS improved Q/HSE focus makes the • Heated hoses
TESS’ service portfolio includes company a preferred supplier for:
complete engineering, procure- • TESS Hose Management MROP
ment, construction and instal- • Manufacturing and project • Welding equipment and
lation. TESS has established management materials
a dedicated technical division • Pressure testing, flushing and • Personal protection and work
with R&D activities, customized certifying of hoses/systems wear equipment (PPE/PPC)
production and total solutions • Piping /welding • Tools and material handling
deliveries. Together with part- • Integrated Supply Systems • Transmission products
ners TESS undertakes the full and Partner Shops • Chemicals and lubricants
responsibility of: • Innovation resources • Other MRO products
• Hose handling systems/
offshore loading PRODUCTS (MRO) TESS IS ISO 14001
CONTROLS AND MEASUREMENT
• Customized hose solutions TESS’ experts and engineering CERTIFIED
• Hydraulic Flying Leads (HFL) staff are continuously improving After having passed the ISO
and bundles its product range enabling the 14001 audit, TESS has become
• Subsea umbilicals company to meet present and one of the first hose and hydrau-
future demands. TESS is innova- lic suppliers in Norway to receive
SERVICES tive, and cooperates directly an ISO 14001 certificate for its
TESS has extensive product and with some of the world’s leading environmental management
field experience. TESS’ service manufacturers. system.
personnel is continuously TESS offers: TESS is ISO 9001 certified.
trained and certified by training
courses. TESS also provides Hoses & couplings CUSTOMER REFERENCES
customer training courses. • Industrial and hydraulic hoses • Statoil
The company’s Life Cycle Care • Bunkering and drilling hoses • FMC Technologies
philosophy includes technical • Ultra high pressure hoses • Aker Solutions
service agreements, 1st – 3rd • Fire resistant - Warmguard • Shell
line customer support, testing, hoses/BOP • Exxon Mobil
spares and rental. • Fittings and valves • Halliburton
Increased uptime, reduced cost, • Pipe fittings and quick couplings • North Atlantic Drilling
more transparent project man- • Steel hoses, compensators • Maersk
agement and last but not least an and pipes • And other successful customers
Trelleborg Offshore is a world leader in engineered polymer solutions that seal, damp and
protect critical applications in harsh and demanding environments. We have 120 years of
experience as well as dedicated and knowledgeable people providing performance at every
level. Trelleborg Offshore has a global presence with many class leading manufacturing
facilities around the world.
Since 1896 we have taken advantage of the well- We are highly experienced in developing tailored
known rubber properties to evolve the company from solutions combining the highest level of per-
producing footwear into supplying highly engineered formance and competitiveness and we are in
products. Our competence has been reined into constant contact with our customers in order to
advanced polymer technology, serving the worldwide define their particular requirements.
market with corrosion- and fire protection and ther- The innovation process is conducted on three levels:
mal insulation together with molded products. • Basic know-how in the physics and chemistry of
polymers
PRODUCTS AND SERVICES: • Experience and knowledge of polymers
Trelleborg Offshore Norway produces tailor applications
made solutions in rubber for protection of other • Design of products including production an
materials, against corrosion, fire, heat and wear- Installation
ing. Rubber also gives excellent performance as
SUBSEA FACILITIES
SUBSEA PROCESSING a construction material in vibration and shock REFERENCES:
dampening, in elimination of structural noise and • Thermal insulation/high temp to BPs Devenik
RISERS, FLOWLINES & TIE-INS
is the ultimate material for sealing systems. project.
We have recently launched our Mobile Production • Thermal insulation to Statoils Åsgard Gas
Unit (MPU) which together with new material Compression project
developments allows thermal insulation, corrosion • Thermal insulation of Exxon Hebron project
protection and passive fire protection to be applied • Thermal insulation of CNR Baobab
and vulcanized at sites word wide. • Thermal insulation of Total Girri & Rosa
• Thermal insulation to Excons Kizomba project
• Thermal insulation to BPs Clair Ridge project
• Thermal insulation to Totals Martin Linge project
Wirescan AS provides products and services for diagnosis and condition assessment of
electrical cables, based on our patented technology LIRA.
The LIRA technology can be regarded as a tool for Risk Management, Cost Control, and
Asset Management for Cables and Umbilicals.
- By knowing the condition of your cables, you are able to handle faults and weaknesses in
a controlled matter, rather than having to fire fight when sudden severe incidents occur.
- You will also have the tool to prioritize which cables and umbilicals to repair or replace
during a budget period, based on your knowledge on their individual condition.
- Cables and umbilicals represent a huge value to the company, and should be part of the
Asset Management System. By using LIRA for frequent condition assessments, you will be
able to attach relevant data about the individual cable’s condition and development over
time, into the system.
PRODUCTS: REFERENCES:
Instruments based on the LIRA technology for Wirescan deliver products and services to a lot
doing Monitoring, Condition Assessments and of the main companies handling the cables and
Fault Location on Cables and Umbilicals. umbilical through their whole life cycle. Cable
Manufacturers, Installation companies, Service
TECHNICAL SERVICES SERVICES: Providers and Oil&Gas Operators.
• Cable and Umbilical Diagnostics Among our customers are companies like Nexans,
• Cable and Umbilical Fault Location NKT, ABB, Technip, Shell, Total, BP, Statoil.
• Cable and Umbilical Monitoring
• Cable and Umbilical Condition Assessments
Source: Subsea 7
47
Source: Kongsberg Oil & Gas
INTSOK@INTSOK.COM
WWW.INTSOK.COM