Beruflich Dokumente
Kultur Dokumente
Pantalla anterior
Bienvenido: cr460mc
Producto: EXCAVATOR
Modelo: 312C EXCAVATOR BWH
Configuración: 312C & 312C L Excavators BWH00001-UP (MACHINE)
POWERED BY 3064 Engine
Pruebas y Ajustes
312C Excavator Hydraulic System
Número de medio -RENR5834-01 Fecha de publicación -01/09/2003 Fecha de actualización -15/09/2003
i01463370
Adjust the pump output flow if the flow test results differ greatly from the specifications.
Illustration 1 g00764882
Main pump compartment
(21) Locknut
(23) Locknut
(25) Locknut
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 1/3
13/10/2019 312C & 312C L Excavators BWH00001-UP (MACHINE) POWERED BY 3064 Engine(SEBP3973 - 30) - Sistemas y componentes
(27) Locknut
Adjust the flow of the right pump for the first stage of the constant horsepower control. The left pump must be at
no-load condition.
2. Turn adjustment screw (22) in order to adjust the output flow of the pump. Turning adjustment screw (22)
clockwise will increase the output flow of the pump. Turning adjustment screw (22) counterclockwise will
decrease the output flow of the pump. A 1/4 turn of adjustment screw (22) will change the output flow of
the pump at the following pressure.
Output flow of the pump will change approximately 12 L/min (3.2 US gpm) if the output flow is
adjusted in the pressure range of 11800 kPa (1700 psi) to 19600 kPa (2850 psi). The pump is
operating in the first stage of the constant horsepower control.
Adjust the flow of the right pump for the second stage of the constant horsepower control. The left pump must
be at no-load condition.
2. Turn adjustment screw (20) in order to adjust the output flow of the pump. Turning adjustment screw (20)
clockwise will increase the output flow of the pump. Turning adjustment screw (20) counterclockwise will
decrease the output flow of the pump. A 1/4 turn of adjustment screw (20) will change the output flow of
the pump at the following pressure.
Output flow of the pump will change approximately 8 L/min (2.1 US gpm) if the output flow is
adjusted in the pressure range of 27500 kPa (4000 psi) to 34300 kPa (4950 psi). The pump is
operating in the second stage of the constant horsepower control.
Adjust the left pump in the same manner as the right pump. Use locknut (27) and adjustment screw (26) in order
to adjust the first stage of the constant horsepower control. Use locknut (25) and adjustment screw (24) in order
to adjust the second stage of the constant horsepower control.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 2/3
13/10/2019 312C & 312C L Excavators BWH00001-UP (MACHINE) POWERED BY 3064 Engine(SEBP3973 - 30) - Sistemas y componentes
Illustration 2 g00764884
Main pump compartment
(29) Locknut
(30) Locknut
2. In order to adjust maximum output flow, turn adjustment screw (31). Turning adjustment screw (31)
clockwise will decrease the maximum output flow of the pump. Turning adjustment screw (31)
counterclockwise will increase the maximum output flow of the pump. A 1/4 turn of adjustment screw
(31) will change the maximum output flow approximately 3.3 L/min (0.87 US gpm).
Adjust the maximum output flow of the left pump in the same manner as the right pump. Use locknut (29) and
adjustment screw (28) in order to adjust the maximum output flow of the left pump.
Copyright 1993 - 2019 Caterpillar Inc. Sun Oct 13 2019 21:35:28 GMT-0500 (hora estándar de Colombia)
Todos los derechos reservados.
cr460mc
Red privada para licenciados del SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage… 3/3