Beruflich Dokumente
Kultur Dokumente
0012 R X Manufacturer’s Inspection and Test Plan PO Specifications and applicable SAMSS, Refer Note (2).
0020
0010
***R X
In process inspection & test requirement
Chemical Analysis, Open Circuit Potential and Capacity test
Specification Details / Notes:
0030
0030
***
W R X
Final inspection & test requirements
Cable Connection Strength
Specification Details / Notes:
Note (2), Per 17-SAMSS-006, only for GALVANIC
MAGNESIUM ANODE WITH LEADS
0040 W R Cable-to-Anode Resistance Note (2), Per 17-SAMSS-006, only for GALVANIC
MAGNESIUM ANODE WITH LEADS
IR171300 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 11/30/2015 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 06/29/2011 IR171300 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0080 R X Product test certificates
Notes:
(1) Refer detailed instruction sheet 175 - 000003 of Inspection and testing requirements for ideal use of this form.
(2) 100% QC checks must be done by Manufacturer’s Inspector. Buyer Inspection Representative shall witness 7% of Purchase Order quantity
unless otherwise increased by the Responsible Inspection Office.
End of IR171300