Beruflich Dokumente
Kultur Dokumente
CE - 14610
LABORATORY REPORT FILE
IMPORTANT FEATURES
Analytical Modeling
Analytical model can be created using the ribbon-based user interface, by editing the
command file or by importing several other files types like dxf, cis/2 etc. The model
geometry can even be generated from the data of macro-enabled applications (like Microsoft
Excel, Microstation etc.) by using Macros.
Physical Modeling
Physical modeling has been a significant feature included in the program. STAAD.Pro
Physical Modeler takes advantage of physical modeling to simplify modeling of a structure,
which in turn more accurately reflects the process of building a model. Beams and surfaces
are placed in the model on the scale of which they would appear in the physical world. A
column may span multiple floors and a surface represents an entire floor of a building, for
example. A joint is then generated anywhere two physical objects meet in the model (as well
as at the free ends of cantilevered members, for convenience).
STAAD Building Planner
STAAD Building Planner is a module that enables seamless generation of building models
that can be analyzed and designed thereafter in the program itself. Operations like defining
geometry, making changes in the geometric specifications are matters of only few clicks in
this workflow.
Steel AutoDrafter
Steel AutoDrafter workflow extracts planar drawings and material take-off from a structural
steel model prepared in STAAD.Pro. It produces excellent quality plans at any level and
sections in any of the orthogonal directions.
STAAD.Beava
The general philosophy governing the design of bridges is that, subject to a set of loading
rules and constraints, the worst effects due to load application should be established and
designed against. The process of load application can be complex as governing rules can
impose interdependent parameters such as loaded length on a lane, lane factors, and load
intensity. To obtain the maximum design effects, engineers have to try many loading
situations on a trial and error basis.
This leads to the generation of many live load application instances (and a large volume of
output data) that then must be combined with dead load and other effects, as well. Bridge
Deck is used to minimize the load application process while complying with national code
requirements.
The program is based on the use of influence surfaces, which are generated by STAAD.Pro
as part of the loading process. An influence surface for a given effect on a bridge deck relates
its value to movement of a unit load over the point of interest. The influence surface is a
three-dimensional form of an influence line for a single member (or, in other words, it is a 2D
influence function).
STAAD.Pro will automatically generate influence surfaces for effects such as bending
moments for elements, deflection in all the degrees of freedom of nodes, and support
reactions. The user then instructs the program to utilize the relevant influence surfaces and,
with due regards to code requirements, optimize load positions to obtain the maximum
desired effects.
Earthquake Mode
Eurocode 8: Part 1 contains specific requirements and recommendations for building
structures that are to be constructed in seismic regions. Essentially, these fundamental
requirements have been provided to ensure that the structures can sustain the seismic loads
without collapse and also – where required– avoid suffering unacceptable damage and can
continue to function after an exposure to a seismic event. This STAAD.Pro workflow is used
to check if the structure conforms to the basic geometric recommendations made in Eurocode
8 (EC8). This workflow is in addition to the normal post-processing workflow which gives
the various analysis results. These checks are intended to give you a "feel" for the structure
and are not mandatory to proceed to the design phase.
Job Information
Engineer Checked Approved
Primary 1 LOADS
Beams
Beam Node A Node B Length Property
(m) (degrees)
1 1 2 7.000 1 0
Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 0.45x0.45 2.02E+3 342E+3 342E+3 577E+3 CONCRETE
Print Time/Date: 15/04/2019 21:26 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 3
Job No Sheet No Rev
1 2
Part
Software licensed to
Job Title Beam Ref
By Date21-Jan-19 Chd
Puneet Talkotra
Client File Beam 1.std Date/Time 21-Jan-2019 14:47
-30.000 kN
-25.000 kN
-15.000 kN/m
7m
7m
Max: 4.308 mm
Print Time/Date: 15/04/2019 21:26 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 2 of 3
Job No Sheet No Rev
1 3
Part
Software licensed to
Job Title Beam Ref
By
Puneet Talkotra Date21-Jan-19 Chd
7m 0 kNm
-72.073 kNm
Y
Load 1 : Bending Z
Whole Structure Mz 100kNm:1m 1 LOADS
Max: 100.301 kN
22.801 kN
7m
-59.699 kN
Y
Load 1 : Shear Y
Whole Structure Fy 100kN:1m 1 LOADS
Print Time/Date: 15/04/2019 21:26 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 3 of 3
Job No Sheet No Rev
1 1
Part
Software licensed to
Job Title Beam Ref
By Date21-Jan-19 Chd
Puneet Talkotra
Client File Beam 1.std Date/Time 21-Jan-2019 14:47
Beam no. 1
Fy(Mpa) 415.000000
Mz(Kn Met) Dist.et Load
Fc(Mpa) 30.000000
88.470001 4.700000 1
Depth(m) 0.450000
-149.600006 0.000000 1
Width(m) 0.450000
-0.000000 7.000000 1
Length(m) 7.000000
Print Time/Date: 15/04/2019 21:27 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
2 1
Part
Software licensed to
Job Title Beam Ref
By
Puneet Talkotra Date20-Feb-19 Chd
Job Information
Engineer Checked Approved
Primary 1 LOADS
Beams
Beam Node A Node B Length Property
(m) (degrees)
1 1 3 4.000 1 0
2 3 2 3.600 1 0
Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 0.45x0.45 2.02E+3 342E+3 342E+3 577E+3 CONCRETE
Print Time/Date: 15/04/2019 21:28 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 3
Job No Sheet No Rev
2 2
Part
Software licensed to
Job Title Beam Ref
-25.000 kN/m
-20.000 kN/m
4.00m 3.60m
-8.138 kNm
-11.017 kNm
Y
Z X Load 1 : Bending Z
Moment - kNm
Print Time/Date: 15/04/2019 21:28 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 2 of 3
Job No Sheet No Rev
2 3
Part
Software licensed to
Job Title Beam Ref
35.654 kN
14.717 kN
2.217 kN
4.00m -0.346 kN
3.60m
4.00m 3.60m
Y
Z X Load 1 : Displacement
Displacement - mm
Print Time/Date: 15/04/2019 21:28 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 3 of 3
Job No Sheet No Rev
2 1
Part
Software licensed to
Job Title Beam Ref
By Date20-Feb-19 Chd
Puneet Talkotra
Client File Beam 2.std Date/Time 20-Feb-2019 14:32
Beam no. 1
Fy(Mpa) 415.000000
Mz(Kn Met) Dist.et Load
Fc(Mpa) 30.000000
8.140000 2.300000 1
Depth(m) 0.450000
-12.960000 0.000000 1
Width(m) 0.450000
-20.760000 4.000000 1
Length(m) 4.000000
Print Time/Date: 15/04/2019 21:29 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
2 1
Part
Software licensed to
Job Title Beam Ref
By
Puneet Talkotra Date20-Feb-19 Chd
Beam no. 2
Fy(Mpa) 415.000000
Mz(Kn Met) Dist.et Load
Fc(Mpa) 30.000000
11.020000 1.800000 1
Depth(m) 0.450000
-20.760000 0.000000 1
Width(m) 0.450000
-22.010000 3.600000 1
Length(m) 3.600000
Print Time/Date: 15/04/2019 21:29 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
3 1
Part
Software licensed to
Job Title Beam Ref
By Date27-Feb-19 Chd
Puneet Talkotra
Client File Beam 3.std Date/Time 27-Feb-2019 14:40
Job Information
Engineer Checked Approved
Primary 1 LOADS
Beams
Beam Node A Node B Length Property
(m) (degrees)
1 1 2 4.800 1 0
Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 0.45x0.30 1.35E+3 101E+3 228E+3 238E+3 CONCRETE
Print Time/Date: 15/04/2019 21:32 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 3
Job No Sheet No Rev
3 2
Part
Software licensed to
Job Title Beam Ref
By Date27-Feb-19 Chd
Puneet Talkotra
Client File Beam 3.std Date/Time 27-Feb-2019 14:40
Y
Z X
Whole Structure Loads 0.1kN:1m 1 Loads
4.8 m
Max: 0.665 mm
Y
Z X Load 1 : Displacement
Displacement - mm
Print Time/Date: 15/04/2019 21:32 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 2 of 3
Job No Sheet No Rev
3 3
Part
Software licensed to
Job Title Beam Ref
By
Puneet Talkotra Date27-Feb-19 Chd
Y
Z X Load 1 : Bending Z
Moment - kNm
4.8 m
Y
Z X Load 1 : Shear Y
Force - kN
Print Time/Date: 15/04/2019 21:32 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 3 of 3
Job No Sheet No Rev
3 1
Part
Software licensed to
Job Title Beam Ref
By Date27-Feb-19 Chd
Puneet Talkotra
Client File Beam 3.std Date/Time 27-Feb-2019 14:40
Beam no. 1
Fy(Mpa) 415.000000
Mz(Kn Met) Dist.et Load
Fc(Mpa) 30.000000
50.000000 2.400000 1
Depth(m) 0.450000
-0.000000 0.000000 0
Width(m) 0.300000
-41.669998 2.800000 1
Length(m) 4.800000
Print Time/Date: 15/04/2019 21:33 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
4 1
Part
Software licensed to
Job Title Frame Ref
Job Information
Engineer Checked Approved
Primary 1 LOADS
Beams
Beam Node A Node B Length Property
(m) (degrees)
1 1 2 4.000 1 0
2 2 3 3.000 2 0
3 3 4 4.000 1 0
4 3 5 4.500 2 0
5 5 6 4.000 1 0
Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 0.45x0.45 2.02E+3 342E+3 342E+3 577E+3 CONCRETE
2 Rect 0.65x0.45 2.92E+3 494E+3 1.03E+6 1.13E+6 CONCRETE
Print Time/Date: 15/04/2019 21:34 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 3
Job No Sheet No Rev
4 2
Part
Software licensed to
Job Title Frame Ref
By Date20-Mar-19 Chd
Puneet Talkotra
Client File Frame.std Date/Time 20-Mar-2019 14:53
15.000 kN 4m 15.000 kN 4m 4m
Y
Z X
Load 1
Max: 0.377 mm
4m 4m 4m
Y
Z X Load 1 : Displacement
Displacement - mm
Print Time/Date: 15/04/2019 21:34 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 2 of 3
Job No Sheet No Rev
4 3
Part
Software licensed to
Job Title Frame Ref
By Date20-Mar-19 Chd
Puneet Talkotra
Client File Frame.std Date/Time 20-Mar-2019 14:53
Max:
Max: 32.200
30.542 kNm
kNm
4m 4m 4m
Y
Z X Load 1 : Bending Z
Moment - kNm
Max: 15.587 kNm Max: -15.196 kNm
Max: 48.119 kN
Max: -49.878 kN
4m 4m 4m
Max: 10.885 kN
Y
Z X Load 1 : Shear Y
Force - kN
Max: 11.170 kN
Print Time/Date: 15/04/2019 21:34 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 3 of 3
Job No Sheet No Rev
4 1
Part
Software licensed to
Job Title Frame Ref
By Date20-Mar-19 Chd
Puneet Talkotra
Client File Frame.std Date/Time 20-Mar-2019 14:53
Beam no. 1
0.450
0.450 m
Fy(Mpa) 415
Load 1
Fc(Mpa) 30
Location End 1
As Reqd(mm²) 20.000000
Pu(Kns) 6.870000
As (%) 0.447000
Mz(Kns-Mt) 2.550000
Bar Size 12
My(Kns-Mt) 0.000000
Bar No 8
Print Time/Date: 15/04/2019 21:36 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
4 1
Part
Software licensed to
Job Title Frame Ref
By Date20-Mar-19 Chd
Puneet Talkotra
Client File Frame.std Date/Time 20-Mar-2019 14:53
Beam no. 2
Fy(Mpa) 415.000000
Mz(Kn Met) Dist.et Load
Fc(Mpa) 30.000000
7.690000 1.000000 1
Depth(m) 0.650000
-4.190000 0.000000 1
Width(m) 0.450000
-28.570000 3.000000 1
Length(m) 3.000000
Print Time/Date: 15/04/2019 21:36 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
5 1
Part
Software licensed to
Job Title Multi Storey Frame Ref
By
Puneet Talkotra Date27-Mar-19 Chd
Job Information
Engineer Checked Approved
Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Cir 0.30 706.858 39.8E+3 39.8E+3 79.5E+3 CONCRETE
2 Rect 0.45x0.30 1.35E+3 101E+3 228E+3 238E+3 CONCRETE
Print Time/Date: 15/04/2019 21:44 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 4
Job No Sheet No Rev
5 2
Part
Software licensed to
Job Title Multi Storey Frame Ref
25.000 kN 3m 3.5 m 5m 5m
-15.000 kN/m -15.000 kN/m
25.000 kN 3m 3.5 m 5m 5m
-15.000 kN/m -15.000 kN/m -15.000 kN/m -15.000 kN/m
25.000 kN 3m 3.5 m 5m 5m
4m 4m 4m 4m 4m
Y
Z X
Load 3
Print Time/Date: 15/04/2019 21:44 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 2 of 4
Job No Sheet No Rev
5 3
Part
Software licensed to
Job Title Multi Storey Frame Ref
By Date27-Mar-19 Chd
Puneet Talkotra
Client File Multi Storey Frame.std Date/Time 27-Mar-2019 15:01
Max: 17.9443mm
m 3.5
Max: 17.928 mm m 17.935 mm
Max: Max: 17.910 mm 5m Max: 17.894 mm 5 m Max: 17.985 mm
Max: 17.935 mm
Max: 18.059 mm
Max: 10.262Max:
mm
3 m10.265 mm Max:
Max:
10.248
10.248 3.5 m
mmmm Max: 10.232 mm 5 m mm
Max: 10.265 Max: 10.220 mm 5 m 10.257 mm
Max: Max: 10.204 mm
4m 4m 4m 4m 4m
Y
Z X Load 3 : Displacement
Displacement - mm
4m 4m 4m 4m 4m
Y
Z X Load 3 : Bending Z
Moment - kNm
Max: 29.475 kNm Max: -31.778 kNm Max: -30.652 kNm Max: -30.834 kNm Max: -31.914 kNm
Print Time/Date: 15/04/2019 21:44 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 3 of 4
Job No Sheet No Rev
5 4
Part
Software licensed to
Job Title Multi Storey Frame Ref
Max: 37.509 kN
Max: -27.223 kN
Max: 3.052 kN 3 m Max: 5.086 kN 3.5 m Max: 4.878 kN 5m Max: 4.804 kN 5m Max: 7.181 kN
Max: -5.422 kN
Max: -13.227 kN
Max: -33.742 kN
Max: -41.085 kN
4m 4m 4m 4m 4m
Y
Z X Load 3 : Shear Y
Force - kN
Max: 13.875 kN
Print Time/Date: 15/04/2019 21:44 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 4 of 4
Job No Sheet No Rev
5 1
Part
Software licensed to
Job Title Multi Storey Frame Ref
By Date27-Mar-19 Chd
Puneet Talkotra
Client File Multi Storey Frame.std Date/Time 27-Mar-2019 15:01
Beam no. 1
0.300 m
Fy(Mpa) 415
Load 1
Fc(Mpa) 30
Location End 1
As Reqd(mm²) 1018.000000
Pu(Kns) -40.150002
As (%) 1.600000
Mz(Kns-Mt) 30.490000
Bar Size 12
My(Kns-Mt) 0.000000
Bar No 10
Print Time/Date: 15/04/2019 21:42 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
5 1
Part
Software licensed to
Job Title Multi Storey Frame Ref
Beam no. 2
Fy(Mpa) 415.000000
Mz(Kn Met) Dist.et Load
Fc(Mpa) 30.000000
42.200001 0.000000 1
Depth(m) 0.450000
-4.660000 0.000000 2
Width(m) 0.300000
-41.689999 3.000000 3
Length(m) 3.000000
Print Time/Date: 15/04/2019 21:42 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
6 1
Part
Software licensed to
Job Title Building Ref
By
Puneet Talkotra Date03-Apr-19 Chd
Job Information
Engineer Checked Approved
Primary 1 DEAD
Primary 2 LIVE
Combination 3 COMBINATION LOAD CASE 3
Section Properties
Prop Section Area Iyy Izz J Material
(cm2) (cm4) (cm4) (cm4)
1 Cir 0.45 1.59E+3 201E+3 201E+3 403E+3 CONCRETE
2 Rect 0.45x0.45 2.02E+3 342E+3 342E+3 577E+3 CONCRETE
1 DEAD Dead
2 LIVE Live
Print Time/Date: 15/04/2019 21:48 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 5
Job No Sheet No Rev
6 2
Part
Software licensed to
Job Title Building Ref
Print Time/Date: 15/04/2019 21:48 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 2 of 5
Job No Sheet No Rev
6 3
Part
Software licensed to
Job Title Building Ref
By Date03-Apr-19 Chd
Puneet Talkotra
Client File Building.std Date/Time 03-Apr-2019 14:59
1 DEAD : Selfweight
Direction Factor Assigned Geometry
Y -1.000 ALL
4.227 mm
5.460 mm
2.842 mm
5.002 mm
3.359 mm
4.034 mm
3.220 mm
2.090 mm
4.059 mm
1.988 mm
2.879 mm
2.487 mm
1.195 mm
2.425 mm
1.451 mm
Y
X
Z
Whole Structure Displacements 10mm:1m 3 COMBINATION LOAD CASE 3
Print Time/Date: 15/04/2019 21:48 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 3 of 5
Job No Sheet No Rev
6 4
Part
Software licensed to
Job Title Building Ref
Max:
Max: 229.125
194.021 kNm
kNm
Max: 6.651
Max: -5.989kNm
kNm
Max: 185.541 kNm
Max:
Max: -87.324
65.646 kNmkNm Max: 277.301
272.439 kNm
Max: 7.188
Max: -6.269kNm
kNm
Y
X
Z
Whole Structure Mz 100kNm:1m 3 COMBINATION LOAD CASE 3
Max: 196.651 kN
Max: -163.349 kN
Max: 205.040 kN
Max: 5.170 kN
Max: -200.570
-214.133 kN
Max: -155.046 kN
Max: -52.118 kN
Max: -156.798 kN
Max: 199.648 kN
Max: 5.308 kN
Max: 2.430 kN
Max: -192.095
-205.744 kN
Max: -158.619 kN
Max: -58.789 kN
Max: -39.314 kN
Max: -150.212 kN
Max: 2.686 kN
Max: 2.080 kN
Max: -195.928
-211.137 kN
Max: -45.667 kN
Max: -23.408 kN
Max: -153.944 kN
Max: 2.174 kN
Y
X Max: -26.685 kN
Z
Whole Structure Fy 100kN:1m 3 COMBINATION LOAD CASE 3
Print Time/Date: 15/04/2019 21:48 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 4 of 5
Job No Sheet No Rev
6 5
Part
Software licensed to
Job Title Building Ref
Y
X
Z Load 3
Whole Structure
Print Time/Date: 15/04/2019 21:48 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 5 of 5
Job No Sheet No Rev
6 1
Part
Software licensed to
Job Title Building Ref
By Date03-Apr-19 Chd
Puneet Talkotra
Client File Building.std Date/Time 03-Apr-2019 14:59
Beam no. 55
0.450 m
Fy(Mpa) 415
Load 3
Fc(Mpa) 25
Location End 1
As Reqd(mm²) 147.000000
Pu(Kns) 204.789993
As (%) 0.427000
Mz(Kns-Mt) 15.000000
Bar Size 12
My(Kns-Mt) 6.570000
Bar No 6
Print Time/Date: 15/04/2019 21:49 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1
Job No Sheet No Rev
6 1
Part
Software licensed to
Job Title Building Ref
Beam no. 78
Fy(Mpa) 415.000000
Mz(Kn Met) Dist.et Load
Fc(Mpa) 25.000000
46.419998 3.100000 3
Depth(m) 0.450000
-49.779999 0.000000 3
Width(m) 0.450000
-83.260002 7.500000 3
Length(m) 7.500000
Print Time/Date: 15/04/2019 21:49 STAAD.Pro V8i (SELECTseries 6) 20.07.11.33 Print Run 1 of 1