Beruflich Dokumente
Kultur Dokumente
Panel Van (FWD and RWD), Cab Chassis and Dual Cab Chassis (RWD) | Euro VI
January 2020
2 Sprinter | Drivetrain
Disclaimer
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any.
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo.
3 Front Axle Mass Limit without A50.
4 Payload = GVM - Unladen mass
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids
7 Tare Mass = 10 litres fuel, no occupants
Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications
ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration.
Panel Van | Technical Data 7
Disclaimer
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any.
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo.
3 Front Axle Mass Limit without A50.
4 Payload = GVM - Unladen mass
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids NOTE:
7 Tare Mass = 10 litres fuel, no occupants Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications All-wheel drive option increases kerb mass by 140-200 kg.
ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration. All-wheel drive option decreases payload by 140-200 kg.
8 Panel Van |Technical Data
Disclaimer
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any.
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo.
3 Front Axle Mass Limit without A50.
4 Payload = GVM - Unladen mass
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids NOTE:
7 Tare Mass = 10 litres fuel, no occupants Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications All-wheel drive option increases kerb mass by 140-200 kg.
ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration. All-wheel drive option decreases payload by 140-200 kg.
Panel Van | Technical Data 9
Disclaimer
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any.
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo.
3 Front Axle Mass Limit without A50.
4 Payload = GVM - Unladen mass
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids NOTE:
7 Tare Mass = 10 litres fuel, no occupants Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications All-wheel drive option increases kerb mass by 140-200 kg.
ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration. All-wheel drive option decreases payload by 140-200 kg.
10 Panel Van |Technical Data
Disclaimer
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any.
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo.
3 Front Axle Mass Limit without A50.
4 Payload = GVM - Unladen mass
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids NOTE:
7 Tare Mass = 10 litres fuel, no occupants Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications All-wheel drive option increases kerb mass by 140-200 kg.
ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration. All-wheel drive option decreases payload by 140-200 kg.
Cab Chassis | Technical Data 11
Disclaimer NOTE:
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any. Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo. Factory Tray option increases kerb mass by 300-500 kg.
3 Front Axle Mass Limit without A50. Factory Tray option decreases payload by 300-500 kg.
4 Payload = GVM - Unladen mass All-wheel drive option increases kerb mass by 140-200 kg.
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants All-wheel drive option decreases payload by 140-200 kg.
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications
7 Tare Mass = 10 litres fuel, no occupants ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration.
12 Cab Chassis | Technical Data
Disclaimer NOTE:
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any. ass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo. Factory Tray option increases kerb mass by 300-500 kg.
3 Front Axle Mass Limit without A50. Factory Tray option decreases payload by 300-500 kg.
4 Payload = GVM - Unladen mass All-wheel drive option increases kerb mass by 140-200 kg.
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants All-wheel drive option decreases payload by 140-200 kg.
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications
7 Tare Mass = 10 litres fuel, no occupants ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration.
Dual Cab Chassis | Technical Data 13
Disclaimer NOTE:
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any. Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo. Factory Tray option increases kerb mass by 300-500 kg.
3 Front Axle Mass Limit without A50. Factory Tray option decreases payload by 300-500 kg.
4 Payload = GVM - Unladen mass All-wheel drive option increases kerb mass by 140-200 kg.
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants All-wheel drive option decreases payload by 140-200 kg.
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications
7 Tare Mass = 10 litres fuel, no occupants ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration.
14 Dual Cab Chassis | Technical Data
Disclaimer NOTE:
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any. Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo. Factory Tray option increases kerb mass by 300-500 kg.
3 Front Axle Mass Limit without A50. Factory Tray option decreases payload by 300-500 kg.
4 Payload = GVM - Unladen mass All-wheel drive option increases kerb mass by 140-200 kg.
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants All-wheel drive option decreases payload by 140-200 kg.
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications
7 Tare Mass = 10 litres fuel, no occupants ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration.
Transfer Minibus | Technical Data 15
Disclaimer
1
Gross Combination Mass (GCM) is the total permissible combined weight of the vehicle including occupants, fuel, cargo plus trailer being towed if any.
2 Gross Vehicle Mass (GVM) is the total permissible weight of the vehicle including occupants, fuel and cargo.
3 Front Axle Mass Limit without A50. NOTE:
4 Payload = GVM - Unladen mass Mass variations (mass ranges provided depend upon individual model - see your dealer for more information if required)
⁵ Unladen mass = vehicle with all standard equipment, 100% fuel and no occupants
6 EU Kerb Mass = Mass of the unladen vehicle with a 75kg driver, 90% fuel and 100% of all other fluids Weights are intended as a guide only. For accuracy, the actual vehicle should always be weighed to determine the exact weight for the specifications
7 Tare Mass = 10 litres fuel, no occupants ordered. Weight tolerance of +/- 5% in production, and additional weight of optional equipment must be taken in consideration.
16 Panel Van | Technical Drawings
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 4,357 D93 omission of partition Cargo area [m²] 4,357 toD93
- It is the responsibility of the bodybuilder ensureomission
that theofvehicle
partition
is suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 7,8 MR6 low-emissions vehicle Euro 6c Gr. III Cargo volume [m³] for homologation after the body has been 7,8 MR6
mounted. low-emissions vehicle Euro 6c Gr.be III copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S02 driver seat Luggage area [m²] N/A S02 driver seat
- The drawing is simplified to some extent and is not legally binding. - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S04 adjustable co-drivers seat Luggage volume [l] N/A S04 complies
- Please check whether the drawing specification adjustablewith
co-drivers seat
the chassis Dimensions are subject to a tolerance- Please check
of up whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,2 T19 sliding door, left Turning clearance circle - curbconfiguration
to curb [m] of your order. 12,2 T19 sliding door, left configuration of your order.
Gross vehicle weight [kg] 3500 Gross vehicle weight [kg] - Optional equipment codes not listed
T93 loading compartment sliding door deleted 3500here,T93
KW-codesloading
andcompartment sliding door deleted
changes resulting - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1750 XZ0 model generation Permissable front axle load [kg] 1750inXZ0
from feasibility checks are not included model generation
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2100 Permissable rear axle load [kg]
- Our instructions for the manufacture 2100 Dimensions & must
of superstructures weights:
be observed, Optional equipment:for the manufacture of superstructures must be observed,
- Our instructions Important notes:
4,357 D03when planning
roof to fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 9,5 14,4 T19 vehicle
MR6 low-emissions slidingEuro
door,
6cleft
Gr. III for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 3500
S02 driver seatT93 loading compartment sliding door deleted - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A 1750 XZ0
S04 adjustable model
co-drivers generation
seat from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 14,4 2100
T19 sliding door, left configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 T93 loading compartment sliding door deleted - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1750 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2100 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2220 2351
Minimal ground clearance [mm] 143 143 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 433 569 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 343 403 Front axle 225/65 R16C A2LH1/FWD 4x2/3500
Vehicle height [mm] 2220 2351
Side cargo[mm]
step height [mm] N/A Rear axle 225/65 R16C 910633 12.12.2019
Minimal ground clearance 143 143 N/A
Panel van
Rear lift in height [mm] 433 569 Base tyres:
Driver‘s door step height [mm] 343 403 Front axle 225/65 R16C A2LH1/FWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 225/65 R16C 910633 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 5,539 D93 omission of partition Cargo area [m²] 5,539 toD93
- It is the responsibility of the bodybuilder ensureomission
that theofvehicle
partitionis suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 9,5 MR6 low-emissions vehicle Euro 6c Gr. III Cargo volume [m³] for homologation after the body has been 9,5 MR6
mounted.low-emissions vehicle Euro 6c Gr.be III copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S02 driver seat Luggage area [m²] N/A S02 driver seat
- The drawing is simplified to some extent and is not legally binding. - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S04 adjustable co-drivers seat Luggage volume [l] N/A S04 complies
- Please check whether the drawing specification adjustablewith
co-drivers seat
the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,4 T19 sliding door, left Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,4 T19 sliding door, left configuration of your order.
Gross vehicle weight [kg] 3500 Gross vehicle weight [kg] - Optional equipment codes not listed
T93 loading compartment sliding door deleted 3500here,T93 loading
KW-codes andcompartment
changes resultingsliding door deleted - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1750 XZ0 model generation Permissable front axle load [kg] 1750inXZ0
from feasibility checks are not included model generation
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2100 Permissable rear axle load [kg]
- Our instructions for the manufacture 2100 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 5,539 D03 whenhigh roof to fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
planning We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 9 MP6 engine12,4version
T19 Euro
sliding
VI door, left for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 3500
S02 driver seatT93 loading compartment sliding door deleted - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A 1650 XZ0
S04 adjustable model
co-drivers generation
seat from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 12,4 2250
T19 sliding door, left configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 T93 loading compartment sliding door deleted - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1650 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2227 2331
Minimal ground clearance [mm] 158 162 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 520 628 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 351 406 Front axle 235/65 R16C A2LH1/RWD 4x2/3500
Vehicle height [mm] 2227 2331
Side cargo[mm]
step height [mm] N/A Rear axle 235/65 R16C 907633 12.12.2019
Minimal ground clearance 158 162 N/A
Panel van
Rear lift in height [mm] 520 628 Base tyres:
Driver‘s door step height [mm] 351 406 Front axle 235/65 R16C A2LH1/RWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907633 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 5,081 D93 omission of partition Cargo area [m²] 5,081 toD93
- It is the responsibility of the bodybuilder ensureomission
that theofvehicle
partitionis suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 9 MP6 engine version Euro VI Cargo volume [m³] for homologation after the body has been 9 MP6
mounted.engine version Euro VI be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S02 driver seat Luggage area [m²] N/A S02 driver seat
- The drawing is simplified to some extent and is not legally binding. - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S04 adjustable co-drivers seat Luggage volume [l] N/A S04 complies
- Please check whether the drawing specification adjustablewith
co-drivers seat
the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,4 T19 sliding door, left Turning clearance circle - curbconfiguration
to curb [m] of your order. 12,4 T19 sliding door, left configuration of your order.
Gross vehicle weight [kg] 3500 Gross vehicle weight [kg] - Optional equipment codes not listed
T93 loading compartment sliding door deleted 3500here,T93 loading
KW-codes andcompartment
changes resultingsliding door deleted - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1650 XZ0 model generation Permissable front axle load [kg] 1650inXZ0
from feasibility checks are not included model generation
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 Permissable rear axle load [kg]
- Our instructions for the manufacture 2250 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 5,081 D03 whenhigh roof to fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
planning We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 9 MP6 engine12,4version
T19 Euro
sliding
VI door, left for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 4100
S02 driver seatT93 loading compartment sliding door deleted - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A 1860 XZ0
S04 adjustable model
co-drivers generation
seat from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 12,4 2430
T19 sliding door, left configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 4100 T93 loading compartment sliding door deleted - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1860 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2266 2378
Minimal ground clearance [mm] 160 163 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 559 675 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 375 446 Front axle 235/65 R16C A2LH1/RWD 4x2/4100
Vehicle height [mm] 2266 2378
Side cargo[mm]
step height [mm] N/A Rear axle 235/65 R16C 907643 12.12.2019
Minimal ground clearance 160 163 N/A
Panel van
Rear lift in height [mm] 559 675 Base tyres:
Driver‘s door step height [mm] 375 446 Front axle 235/65 R16C A2LH1/RWD 4x2/4100
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907643 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 5,081 D93 omission of partition Cargo area [m²] 5,081 toD93
- It is the responsibility of the bodybuilder ensureomission
that theofvehicle
partitionis suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 9 MP6 engine version Euro VI Cargo volume [m³] for homologation after the body has been 9 MP6
mounted.engine version Euro VI be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S02 driver seat Luggage area [m²] N/A S02 driver seat
- The drawing is simplified to some extent and is not legally binding. - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S04 adjustable co-drivers seat Luggage volume [l] N/A S04 complies
- Please check whether the drawing specification adjustablewith
co-drivers seat
the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,4 T19 sliding door, left Turning clearance circle - curbconfiguration
to curb [m] of your order. 12,4 T19 sliding door, left configuration of your order.
Gross vehicle weight [kg] 4100 Gross vehicle weight [kg] - Optional equipment codes not listed
T93 loading compartment sliding door deleted 4100here,T93 loading
KW-codes andcompartment
changes resultingsliding door deleted - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1860 XZ0 model generation Permissable front axle load [kg] 1860inXZ0
from feasibility checks are not included model generation
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 Permissable rear axle load [kg]
- Our instructions for the manufacture 2430 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 5,081 D03 whenhigh roof to fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
planning We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 8,9 MP6 engine12,3version
T19 Euro
sliding
VI door, left for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 5000
S02 driver seatT93 loading compartment sliding door deleted - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A 1850 XZ0
S04 adjustable model
co-drivers generation
seat from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 12,3 3500
T19 sliding door, left configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 T93 loading compartment sliding door deleted - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1850 XZ0 model generation from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2300 2422
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 594 720 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 406 473 Front axle 195/75 R16C A2LH1/RWD 4x2/5000
Vehicle height [mm] 2300 2422
Side cargo[mm]
step height [mm] N/A Rear axle 195/75 R16C 907653 12.12.2019
Minimal ground clearance 173 176 N/A
Panel van
Rear lift in height [mm] 594 720 Base tyres:
Driver‘s door step height [mm] 406 473 Front axle 195/75 R16C A2LH1/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907653 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 4,741 D93 omission of partition Cargo area [m²] 4,741 toD93
- It is the responsibility of the bodybuilder ensureomission
that theofvehicle
partitionis suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 8,9 MP6 engine version Euro VI Cargo volume [m³] for homologation after the body has been 8,9 MP6
mounted.engine version Euro VI be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S02 driver seat Luggage area [m²] N/A S02 driver seat
- The drawing is simplified to some extent and is not legally binding. - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S04 adjustable co-drivers seat Luggage volume [l] N/A S04 complies
- Please check whether the drawing specification adjustablewith
co-drivers seat
the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,3 T19 sliding door, left Turning clearance circle - curbconfiguration
to curb [m] of your order. 12,3 T19 sliding door, left configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg] - Optional equipment codes not listed
T93 loading compartment sliding door deleted 5000here,T93 loading
KW-codes andcompartment
changes resultingsliding door deleted - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 XZ0 model generation Permissable front axle load [kg] 1850inXZ0
from feasibility checks are not included model generation
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load [kg]
- Our instructions for the manufacture 3500 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 4,741 D03 whenhigh roof to fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
planning We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 14,4 of
14 D93 omission S04 adjustable co-drivers seat
partition for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A MP6 engine 3500version
T19 Euro
sliding
VI door, left - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A S02 driver 1860seatT93 loading compartment sliding door deleted from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 2250 XZ0
14,4 S04 adjustable co-driversmodel generation
seat configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 T19 sliding door, left - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1860 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 XZ0 model generation - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2519 2616
Minimal ground clearance [mm] 158 161 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 521 621 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 351 398 Front axle 235/65 R16C A3LH2/RWD 4x2/3500
Vehicle height [mm] 2519 2616
Side cargo[mm]
step height [mm] N/A Rear axle 235/65 R16C 907635 12.12.2019
Minimal ground clearance 158 161 N/A
Panel van
Rear lift in height [mm] 521 621 Base tyres:
Driver‘s door step height [mm] 351 398 Front axle 235/65 R16C A3LH2/RWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907635 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 6,9 D03 high roof Cargo area [m²] - It is the responsibility of the bodybuilder6,9 toD03
ensurehigh roof
that the vehicle is suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 14 D93 omission of partition Cargo volume [m³] for homologation after the body has been 14 D93mounted.omission of partition be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A MP6 engine version Euro VI Luggage area [m²] N/A MP6 engine version
- The drawing is simplified to some extent and is not legally binding. Euro VI - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S02 driver seat Luggage volume [l] N/A S02 complies
- Please check whether the drawing specification driver seatwith the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,4 S04 adjustable co-drivers seat Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,4 S04 adjustable co-drivers seat configuration of your order.
Gross vehicle weight [kg] 3500 T19 sliding door, left Gross vehicle weight [kg] - Optional equipment codes not listed 3500here,T19 sliding
KW-codes door,
and left resulting
changes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1860 Permissable front axle load [kg]
T93 loading compartment sliding door deleted 1860inT93
from feasibility checks are not included loading compartment sliding door deleted
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 XZ0 model generation Permissable rear axle load [kg]
- Our instructions for the manufacture 2250 Dimensions
XZ0 &must
weights:
model generation
of superstructures be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 6,9 D05 whensuper-high
planning toroof
fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 14,4 of
14 D93 omission S04 adjustable co-drivers seat
partition for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A MP6 engine 4100version
T19 Euro
sliding
VI door, left - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A S02 driver 1860seatT93 loading compartment sliding door deleted from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 2430 XZ0
14,4 S04 adjustable co-driversmodel generation
seat configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 4100 T19 sliding door, left - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1860 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 XZ0 model generation - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2558 2663
Minimal ground clearance [mm] 160 163 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 561 669 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 374 438 Front axle 235/65 R16C A3LH2/RWD 4x2/4100
Vehicle height [mm] 2558 2663
Side cargo[mm]
step height [mm] N/A Rear axle 235/65 R16C 907645 12.12.2019
Minimal ground clearance 160 163 N/A
Panel van
Rear lift in height [mm] 561 669 Base tyres:
Driver‘s door step height [mm] 374 438 Front axle 235/65 R16C A3LH2/RWD 4x2/4100
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907645 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 6,9 D03 high roof Cargo area [m²] - It is the responsibility of the bodybuilder6,9 toD03
ensurehigh roof
that the vehicle is suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 14 D93 omission of partition Cargo volume [m³] for homologation after the body has been 14 D93mounted.omission of partition be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A MP6 engine version Euro VI Luggage area [m²] N/A MP6 engine version
- The drawing is simplified to some extent and is not legally binding. Euro VI - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S02 driver seat Luggage volume [l] N/A S02 complies
- Please check whether the drawing specification driver seatwith the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,4 S04 adjustable co-drivers seat Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,4 S04 adjustable co-drivers seat configuration of your order.
Gross vehicle weight [kg] 4100 T19 sliding door, left Gross vehicle weight [kg] - Optional equipment codes not listed 4100here,T19 sliding
KW-codes door,
and left resulting
changes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1860 Permissable front axle load [kg]
T93 loading compartment sliding door deleted 1860inT93
from feasibility checks are not included loading compartment sliding door deleted
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 XZ0 model generation Permissable rear axle load [kg]
- Our instructions for the manufacture 2430 Dimensions
XZ0 &must
weights:
model generation
of superstructures be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 6,9 D05 whensuper-high
planning toroof
fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 14,3 of
13,9 D93 omission S04 adjustable co-drivers seat
partition for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A MP6 engine 5000version
T19 Euro
sliding
VI door, left - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A S02 driver 1850
seatT93 loading compartment sliding door deleted from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 3500 XZ0 model
14,3 S04 adjustable co-drivers generation
seat configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 T19 sliding door, left - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1850 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 XZ0 model generation - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2595 2706
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 595 713 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 405 462 Front axle 195/75 R16C A3LH2/RWD 4x2/5000
Vehicle height [mm] 2595 2706
Side cargo[mm]
step height [mm] N/A Rear axle 195/75 R16C 907655 12.12.2019
Minimal ground clearance 173 176 N/A
Panel van
Rear lift in height [mm] 595 713 Base tyres:
Driver‘s door step height [mm] 405 462 Front axle 195/75 R16C A3LH2/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907655 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 6,552 D03 high roof Cargo area [m²] 6,552 toD03
- It is the responsibility of the bodybuilder ensurehigh roof
that the vehicle is suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 13,9 D93 omission of partition Cargo volume [m³] for homologation after the body has13,9 been D93
mounted.omission of partition be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A MP6 engine version Euro VI Luggage area [m²] N/A MP6 engine version
- The drawing is simplified to some extent and is not legally binding. Euro VI - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S02 driver seat Luggage volume [l] N/A S02 complies
- Please check whether the drawing specification driver seatwith the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,3 S04 adjustable co-drivers seat Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,3 S04 adjustable co-drivers seat configuration of your order.
Gross vehicle weight [kg] 5000 T19 sliding door, left Gross vehicle weight [kg] - Optional equipment codes not listed 5000here,T19 sliding
KW-codes door,
and left resulting
changes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load [kg]
T93 loading compartment sliding door deleted 1850inT93
from feasibility checks are not included loading compartment sliding door deleted
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 XZ0 model generation Permissable rear axle load [kg]
- Our instructions for the manufacture 3500 Dimensions
XZ0 &must
weights:
model generation
of superstructures be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 6,552 D05 whensuper-high
planning toroof
fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 14,4 of
15,5 D93 omission S04 adjustable co-drivers seat
partition for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A MP6 engine 3500version
T19 Euro
sliding
VI door, left - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A S02 driver 1860
seatT93 loading compartment sliding door deleted from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 2250 XZ0 model
14,4 S04 adjustable co-drivers generation
seat configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 3500 T19 sliding door, left - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1860 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 XZ0 model generation - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2521 2613
Minimal ground clearance [mm] 158 162 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 522 617 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 351 399 Front axle 235/65 R16C A4LH2/RWD 4x2/3500
Vehicle height [mm] 2521 2613
Side cargo[mm]
step height [mm] N/A Rear axle 235/65 R16C 907637 12.12.2019
Minimal ground clearance 158 162 N/A
Panel van
Rear lift in height [mm] 522 617 Base tyres:
Driver‘s door step height [mm] 351 399 Front axle 235/65 R16C A4LH2/RWD 4x2/3500
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907637 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 7,606 D03 high roof Cargo area [m²] 7,606 toD03
- It is the responsibility of the bodybuilder ensurehigh roof
that the vehicle is suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 15,5 D93 omission of partition Cargo volume [m³] for homologation after the body has15,5 been D93
mounted.omission of partition be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A MP6 engine version Euro VI Luggage area [m²] N/A MP6 engine version
- The drawing is simplified to some extent and is not legally binding. Euro VI - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S02 driver seat Luggage volume [l] N/A S02 complies
- Please check whether the drawing specification driver seatwith the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,4 S04 adjustable co-drivers seat Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,4 S04 adjustable co-drivers seat configuration of your order.
Gross vehicle weight [kg] 3500 T19 sliding door, left Gross vehicle weight [kg] - Optional equipment codes not listed 3500here,T19 sliding
KW-codes door,
and left resulting
changes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1860 Permissable front axle load [kg]
T93 loading compartment sliding door deleted 1860inT93
from feasibility checks are not included loading compartment sliding door deleted
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2250 XZ0 model generation Permissable rear axle load [kg]
- Our instructions for the manufacture 2250 Dimensions
XZ0 &must
weights:
model generation
of superstructures be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 7,606 D05 whensuper-high
planning toroof
fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 14,4 of
15,5 D93 omission S04 adjustable co-drivers seat
partition for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A MP6 engine 4100version
T19 Euro
sliding
VI door, left - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A S02 driver 1860
seatT93 loading compartment sliding door deleted from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 2430 XZ0 model
14,4 S04 adjustable co-drivers generation
seat configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 4100 T19 sliding door, left - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1860 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 XZ0 model generation - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2561 2662
Minimal ground clearance [mm] 160 162 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 564 667 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 374 439 Front axle 235/65 R16C A4LH2/RWD 4x2/4100
Vehicle height [mm] 2561 2662
Side cargo[mm]
step height [mm] N/A Rear axle 235/65 R16C 907647 12.12.2019
Minimal ground clearance 160 162 N/A
Panel van
Rear lift in height [mm] 564 667 Base tyres:
Driver‘s door step height [mm] 374 439 Front axle 235/65 R16C A4LH2/RWD 4x2/4100
Side cargo step height [mm] N/A N/A Rear axle 235/65 R16C 907647 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 7,606 D03 high roof Cargo area [m²] 7,606 toD03
- It is the responsibility of the bodybuilder ensurehigh roof
that the vehicle is suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 15,5 D93 omission of partition Cargo volume [m³] for homologation after the body has15,5 been D93
mounted.omission of partition be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A MP6 engine version Euro VI Luggage area [m²] N/A MP6 engine version
- The drawing is simplified to some extent and is not legally binding. Euro VI - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S02 driver seat Luggage volume [l] N/A S02 complies
- Please check whether the drawing specification driver seatwith the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,4 S04 adjustable co-drivers seat Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,4 S04 adjustable co-drivers seat configuration of your order.
Gross vehicle weight [kg] 4100 T19 sliding door, left Gross vehicle weight [kg] - Optional equipment codes not listed 4100here,T19 sliding
KW-codes door,
and left resulting
changes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1860 Permissable front axle load [kg]
T93 loading compartment sliding door deleted 1860inT93
from feasibility checks are not included loading compartment sliding door deleted
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 2430 XZ0 model generation Permissable rear axle load [kg]
- Our instructions for the manufacture 2430 Dimensions
XZ0 &must
weights:
model generation
of superstructures be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 7,606 D05 whensuper-high
planning toroof
fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] 14,3 of
15,4 D93 omission S04 adjustable co-drivers seat
partition for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A MP6 engine 5000version
T19 Euro
sliding
VI door, left - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A S02 driver 1850
seatT93 loading compartment sliding door deleted from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 3500 XZ0 model
14,3 S04 adjustable co-drivers generation
seat configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 T19 sliding door, left - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1850 T93 loading compartment sliding door deleted from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 XZ0 model generation - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2596 2703
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Panel van
Rear lift in height [mm] laden unladen 598 709 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 405 464 Front axle 195/75 R16C A4LH2/RWD 4x2/5000
Vehicle height [mm] 2596 2703
Side cargo[mm]
step height [mm] N/A Rear axle 195/75 R16C 907657 12.12.2019
Minimal ground clearance 173 176 N/A
Panel van
Rear lift in height [mm] 598 709 Base tyres:
Driver‘s door step height [mm] 405 464 Front axle 195/75 R16C A4LH2/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907657 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] 7,273 D03 high roof Cargo area [m²] 7,273 toD03
- It is the responsibility of the bodybuilder ensurehigh roof
that the vehicle is suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] 15,4 D93 omission of partition Cargo volume [m³] for homologation after the body has15,4 been D93
mounted.omission of partition be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A MP6 engine version Euro VI Luggage area [m²] N/A MP6 engine version
- The drawing is simplified to some extent and is not legally binding. Euro VI - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A S02 driver seat Luggage volume [l] N/A S02 complies
- Please check whether the drawing specification driver seatwith the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,3 S04 adjustable co-drivers seat Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,3 S04 adjustable co-drivers seat configuration of your order.
Gross vehicle weight [kg] 5000 T19 sliding door, left Gross vehicle weight [kg] - Optional equipment codes not listed 5000here,T19 sliding
KW-codes door,
and left resulting
changes - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load [kg]
T93 loading compartment sliding door deleted 1850inT93
from feasibility checks are not included loading compartment sliding door deleted
the drawing. from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 XZ0 model generation Permissable rear axle load [kg]
- Our instructions for the manufacture 3500 Dimensions
XZ0 &must
weights:
model generation
of superstructures be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 7,273 D05 whensuper-high
planning toroof
fit bodies of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] N/A S02 driver12,3
seat for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 5000 passenger seat
S23 two-seater - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A XZ0 model1850generation from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 12,3 3500 configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1850 from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2273 2360
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Chassis
Rear lift in height [mm] laden unladen 669 831 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 406 471 Front axle 195/75 R16C A2LH1/RWD 4x2/5000
Vehicle height [mm] 2273 2360
Side cargo[mm]
step height [mm] N/A Rear axle 195/75 R16C 907153 12.12.2019
Minimal ground clearance 173 176 N/A
Chassis
Rear lift in height [mm] 669 831 Base tyres:
Driver‘s door step height [mm] 406 471 Front axle 195/75 R16C A2LH1/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907153 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] N/A toMP6
- It is the responsibility of the bodybuilder ensureengine version
that the Eurois VI
vehicle suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] for homologation after the body hasN/A been S02
mounted.driver seat be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S23 two-seater passenger seat Luggage area [m²] N/A S23 two-seater
- The drawing is simplified to some extent and is not legally binding. passenger seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] N/A XZ0 complies
- Please check whether the drawing specification model generation
with the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,3 Turning clearance circle - curbconfiguration
to curb [m] of your order. 12,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg] - Optional equipment codes not listed 5000here, KW-codes and changes resulting - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load [kg] 1850in the drawing.
from feasibility checks are not included from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load [kg]
- Our instructions for the manufacture 3500 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 7,703 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] N/A S02 driver14,3
seat for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 5000 passenger seat
S23 two-seater - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A XZ0 model1850generation from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 14,3 3500 configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1850 from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2271 2351
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Chassis
Rear lift in height [mm] laden unladen 668 827 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 405 461 Front axle 195/75 R16C A3LH1/RWD 4x2/5000
Vehicle height [mm] 2271 2351
Side cargo[mm]
step height [mm] N/A Rear axle 195/75 R16C 907155 12.12.2019
Minimal ground clearance 173 176 N/A
Chassis
Rear lift in height [mm] 668 827 Base tyres:
Driver‘s door step height [mm] 405 461 Front axle 195/75 R16C A3LH1/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907155 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] N/A toMP6
- It is the responsibility of the bodybuilder ensureengine version
that the Eurois VI
vehicle suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] for homologation after the body hasN/A been S02
mounted.driver seat be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S23 two-seater passenger seat Luggage area [m²] N/A S23 two-seater
- The drawing is simplified to some extent and is not legally binding. passenger seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] N/A XZ0 complies
- Please check whether the drawing specification model generation
with the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,3 Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg] - Optional equipment codes not listed 5000here, KW-codes and changes resulting - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load [kg] 1850in the drawing.
from feasibility checks are not included from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load [kg]
- Our instructions for the manufacture 3500 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 9,198 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] N/A S02 driver12,3
seat for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 5000 co-drivers seat
S04 adjustable - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A XZ0 model1850generation from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 12,3 3500 configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1850 from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2267 2358
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Crew cab
Rear lift in height [mm] laden unladen 669 821 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 406 464 Front axle 195/75 R16C A2LH1/RWD 4x2/5000
Vehicle height [mm] 2267 2358
Side cargo[mm]
step height [mm] N/A Rear axle 195/75 R16C 907253 12.12.2019
Minimal ground clearance 173 176 N/A
Crew cab
Rear lift in height [mm] 669 821 Base tyres:
Driver‘s door step height [mm] 406 464 Front axle 195/75 R16C A2LH1/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907253 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] N/A toMP6
- It is the responsibility of the bodybuilder ensureengine version
that the Eurois VI
vehicle suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] for homologation after the body hasN/A been S02
mounted.driver seat be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S04 adjustable co-drivers seat Luggage area [m²] N/A S04 adjustable
- The drawing is simplified to some extent and is not legally binding. co-drivers seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] N/A XZ0 complies
- Please check whether the drawing specification model generation
with the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 12,3 Turning clearance circle - curbconfiguration
to curb [m] of your order. 12,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg] - Optional equipment codes not listed 5000here, KW-codes and changes resulting - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load [kg] 1850in the drawing.
from feasibility checks are not included from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load [kg]
- Our instructions for the manufacture 3500 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 5,782 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neithe
Dimensions
reserve all rights for this are subject
drawing. Thetodrawing
a tolerance
may of up to +/- 3%.
neither
Turning clearance circle - curb to curb [m]
Cargo volume [m³] N/A S02 driver14,3
seat for homologationconfiguration
after the bodyofhas
yourbeen
order.
mounted. be copied nor passed on to any third person.
Gross vehicle weight [kg]
Luggage area [m²] N/A 5000 co-drivers seat
S04 adjustable - Optional to
- The drawing is simplified equipment
some extent codes
andnot listed
is not here,binding.
legally KW-codes and changes resulting
Luggage volume Permissable
[l] front axle load [kg] N/A XZ0 model1850generation from feasibility
- Please check whether the drawingchecks are not included
specification compliesinwith
the the
drawing.
chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curbrear
Permissable axle load
to curb [m] [kg] 14,3 3500 configuration of- your
Our instructions
order. for the manufacture of superstructures must be observed,
Gross vehicle weight [kg] 5000 - Optional equipment when planning
codes to fit here,
not listed bodies of other than
KW-codes Mercedes-Benz
and changes resultingmanufacture.
Permissable front axle load [kg] 1850 from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 - Our instructionsAllfordimensions refer to
the manufacture ofthe standard version
superstructures mustand the base tyres.
be observed,
laden unladen when planning to In fit
laden condition
bodies of otherallthan
axles are fully loaded
Mercedes-Benz (see table).
manufacture.
Vehicle height [mm] 2264 2345
Minimal ground clearance [mm] 173 176 All dimensions refer to the standard version and the base tyres. Crew cab
Rear lift in height [mm] laden unladen 668 821 Base tyres: In laden condition all axles are fully loaded (see table).
Driver‘s door step height [mm] 405 455 Front axle 195/75 R16C A3LH1/RWD 4x2/5000
Vehicle height [mm] 2264 2345
Side cargo[mm]
step height [mm] N/A Rear axle 195/75 R16C 907255 12.12.2019
Minimal ground clearance 173 176 N/A
Crew cab
Rear lift in height [mm] 668 821 Base tyres:
Driver‘s door step height [mm] 405 455 Front axle 195/75 R16C A3LH1/RWD 4x2/5000
Side cargo step height [mm] N/A N/A Rear axle 195/75 R16C 907255 12.12.2019
Dimensions & weights: Optional equipment: Dimensions & weights: Important notes: Optional equipment: Important notes:
Cargo area [m²] N/A MP6 engine version Euro VI Cargo area [m²] N/A toMP6
- It is the responsibility of the bodybuilder ensureengine version
that the Eurois VI
vehicle suitable - It isThe
We reserve all rights for this drawing. thedrawing
responsibility of the bodybuilder to ensure that the vehicle is suitable
may neither We reserve all rights for this drawing. The drawing may neither
Cargo volume [m³] N/A S02 driver seat Cargo volume [m³] for homologation after the body hasN/A been S02
mounted.driver seat be copied nor passed on to any third forperson.
homologation after the body has been mounted. be copied nor passed on to any third person.
Luggage area [m²] N/A S04 adjustable co-drivers seat Luggage area [m²] N/A S04 adjustable
- The drawing is simplified to some extent and is not legally binding. co-drivers seat - The drawing is simplified to some extent and is not legally binding.
Luggage volume [l] N/A XZ0 model generation Luggage volume [l] N/A XZ0 complies
- Please check whether the drawing specification model generation
with the chassis Dimensions are subject to a tolerance- Pleaseof upcheck whether
to +/- 3%. the drawing specification complies with the chassis Dimensions are subject to a tolerance of up to +/- 3%.
Turning clearance circle - curb to curb [m] 14,3 Turning clearance circle - curbconfiguration
to curb [m] of your order. 14,3 configuration of your order.
Gross vehicle weight [kg] 5000 Gross vehicle weight [kg] - Optional equipment codes not listed 5000here, KW-codes and changes resulting - Optional equipment codes not listed here, KW-codes and changes resulting
Permissable front axle load [kg] 1850 Permissable front axle load [kg] 1850in the drawing.
from feasibility checks are not included from feasibility checks are not included in the drawing.
Permissable rear axle load [kg] 3500 Permissable rear axle load [kg]
- Our instructions for the manufacture 3500 Dimensions &must
of superstructures weights:
be observed, Optional equipment:
- Our instructions for the manufacture of superstructures must be observed, Important notes:
Cargo area [m²] 7,703 MP6 whenengine version
planning to fitEuro VI of other than Mercedes-Benz manufacture. - It is the responsibility of the bodybuilder to ensure that the vehicle is suitable
bodies We reserve all rights for this drawing. The drawing may neithe
All of the information contained in this brochure was correct as at January 2020. However, the manufacturer reserves the right to discontinue, make changes to design and
specifications to vehicles or optional equipment without notice. The and the words Mercedes-Benz are registered trademarks of Daimler AG, Stuttgart, Germany.
Mercedes-Benz Australia/Pacific Pty Ltd, ABN 16 618 413 362. Lexia Place, Mulgrave, Victoria 3170. Telephone: (03) 9566 9266. Facsimile: (03) 9562 6282.