PETROL AND PETROCHEMICAL COMPANY FOR INDUSTRIAL SUPPORT SERVICES
RADIATION SAFETY MANUAL
Doc. # PETROCHEM/RS/01 Rev.: 09 Date : 05.12.2015 Page # 40 of 48
APPENDIX 2A
DAILY INSPECTION CHECK LIST
Job Location Vehicle Date Projector S/N PC Eqp.No Source Source S/N Technicians Survey Meter Calibration Due Date Name S/N Name S/N Name S/N Name S/N Exposure Device YES NO Radiation Level on Surface of Projector <200mR/h Visual Physical condition acceptable Warning Label legible Isotope label matches with the Isotope S/N Protective Cover and Projector assembly condition acceptable Screws are tightly held Locking/selector assembly properly working Guide Tube connector condition acceptable Outlet port free of damage and smooth operating Isotope connector Go-No-GO Gauge Test performed Guide Tube Free of Cuts ,inward dents or Heat Damage The threads of Swaged fitting not stripped or clogged with dirt Extension Tubes physical conditions are acceptable Remote Control Unit All the components are securely attached Reel condition is acceptable Drive cable condition approx. 12" are free of cuts,breaks, nicks,fraying ,bends and rust Drive Cable Tubing condition acceptable The crank control unit operates smoothly The ball at the end of the control cable connector NO GO into the hole of the gauge The shank to stem connection of the control cable NO GO into the notch of the gauge The larger notch of the gauge NO GO into the gap between the joined connector. Vehicle Emergency Contact information available Current Radiation Safety Procedure available Vehicle Warning Signs available Transport Box with Warning sign fixed properly Radiation Warning Signs sufficient numbers are available Boundary Rope/Tape available Lead sheets/lead bags are available Item stored neatly and correctly Tungsten Collimator available Initial Radiographic Exposure Radiation Warning Signs in place Properly barricaded with Rope with pennants and tape Drive control and source connection to the projector acceptable Projector selector rotation acceptable Posi Lock slide operation acceptable Drive control Operation acceptable Comments if any unacceptable conditions noted:(Add attachment if required)