Beruflich Dokumente
Kultur Dokumente
Ash content in flour can be measured by using conventional laboratory methodologies, or rapid
instrumental techniques. The selected method may be a function of cost, time and availability of
qualified personnel.
The pure endosperm contains about 0.35% ash. The gradient in mineral content increases from
the center to the outer layers of endosperm, reaching the non-endosperm parts of the kernel
(pericarp, aleurone and germ) whose ash content is much higher than the endosperm. The ash
content of bran is known to be 10–20 times that of the endosperm.3
In the cereal processing industry, there are official methods of analysis to determine the ash
content of flours. The methods include:
The AACCI Method 08–01 is based on the fact that when a sample is incinerated in an oven, the
high temperature vaporizes the moisture and burns away all the organic materials (starch,
proteins, sugars, and fat), leaving only the ash. The residue is composed of the non-combustible,
inorganic minerals that are concentrated in the bran layer.4
1. Weighing a sample of flour or ground wheat (3–5 g) and placing it into an ash cup
2. Heating the sample at 585°C (1,085°F) in an electric muffle furnace/oven until its weight
is stable (stops decreasing). This process may take several hours.
3. Cooling residue to room temperature
4. Weighing residue
5. Calculating ash content according to the following equation:5
Even when using NIR technology for moisture determination, , the incineration method
remains the reference in establishing the instrument’s calibration. Online systems are becoming
more common in flour mills especially their ability to provide continuous monitoring during
processing.2
Application
Some millers tend to overlook the impact of ash content on the flour baking performance.
However, the non-endosperm parts of the wheat kernel are known to decrease the flour’s baking
quality. As the ash content increases so does the level of non-endosperm material.2
Despite not being regarded as a flour quality parameter in some bakers’ specifications, ash in
flour is still relevant for bakers and millers. The following are some of the reasons: 3
Ash content is a good indicator of bran contamination in white or refined flours. As flour
extraction rate is increased, the amount of contamination with non-endosperm increases
and the ash content increases. For most breadmaking applications, bakers look for
excellent quality flours with high protein levels and highest purity in terms of endosperm
content.2
It is a good method to differentiate patent flours from clear flours. The ash content of
patent flours is lower compared to clear flours.
References
1. Posner, E.S. “Milling Terms.” Wheat Flour Milling, 2nd printing, AACC International, Inc.,
2011, p. 464.
2. Carson, G.R., and Edwards, N.M. “Criteria of Wheat and Flour Quality.” Wheat Chemistry
and Technology, 4th edition, AACC International, Inc., 2009, pp. 97–118.
3. Posner, E.S. “Wheat: The Raw Material.” Wheat Flour Milling, 2nd printing, AACC
International, Inc., 2011, pp. 1–46.
4. Wheat Marketing Center, Inc. “Wheat and Flour Tests: Moisture Content.” Wheat and
Flour Testing Methods: A Guide to Understanding Wheat and Flour Quality, 2004, p. 13.
5. AACC International. Approved Methods of Analysis, 11th Ed. Method 08-01.01. Ash—
Basic Method. Approved November 3, 1999. AACC International, St. Paul, MN, U.S.A.