Beruflich Dokumente
Kultur Dokumente
I1 '> 1 jJ X ^ f t
«<----- AS CAI — 1968
UPC 624.014.2:693.814
Ab3
This is a free 5 page sample. Access the full version online.
V'^bo 7CAM972 ^
Australian Standard
CAI - 1968
SAA STEEL
STRUCTURES CODE
Amendment No. 2
to
AS CAT — 1968
Page 20. Rule 4.2.2. Unsupported Widths. Delete existing Rule and
substitute:
4.2.2 Unsupported Widths. Where a plate is connected to other parts Amdt. No. 2
of a built-up member along lines generally parallel to the longitudinal axis Sept. 1969.
of the member, the width, b2, between any two adjacent lines of connections
shall not exceed the following:
(a) For plates in compression . . .A— TV
VFy
However, where the width exceeds—
210 SV for welded plates which are not stress-relieved, or
-----
VFy
AA 7^ for other plates,
VFy
the excess width shall be assumed to be located centrally, and its
sectional area shall be neglected when calculating the effective
geometrical properties of the section.
(b) For plates in tension ... 1007V
However, where the width exceeds 607V the excess width shall
be assumed to be located centrally, and its sectional area shall be
neglected when calculating the geometrical properties of the section.
i
In this Rule, 7’1 shall be taken to be the thickness of the plate, irrespective
of whether the plate is a flange or a web of the member.
This is a free 5 page sample. Access the full version online.
(2)
USE OF STEEL
IN STRUCTURES
AS CAI — 1968