Beruflich Dokumente
Kultur Dokumente
November
Week3 Nov1-
8 Straight through cable arrangement
Week4 Nov9-
16 We use this UTP cabling for the different type of network devices. This type of
File of two cable will be used most of the time and can be used to:
weeks
together
Connect a computer to a switch
Connect a computer to a cable
Connect a router's LAN port to a switch
Connect two switches
We use this UTP cabling for the same type of network devices where the pins
order on one end follows the 568A pinning order and the other end of the cable
follows the 568B pinning order. That means connecting two pieces of equipment
that have the same pin edge on both ports. Such as connecting
In you need to check how crossover cable looks like, both side (side A and side
B) of cable have wire arrangement with following different color
Now days, LAN card has intelligence, so that both cables can work. They have a
feature on lots of switches and hubs. Straight and crossover cable can be Cat3,
Cat 5, Cat 5e or Cat 6 UTP cable, the only difference is each type will have
different wire arrangement in the cable for serving different purposes. Straight
cables connect two DIFFERENT types of devices. Whereas crossover cables
connect two of the SAME type
Ethernet network cables are straight and crossover cable. This Ethernet network
cable is made of 4 pair high performance cable that consists of twisted pair
conductors that used for data transmission. Both end of cable is called RJ45
connector.
Week5
Nov17-24 Switch
A network switch is a small hardware device that joins multiple computers
together within one local area network (LAN).