Beruflich Dokumente
Kultur Dokumente
OF MAHARASHTRA
Improvement to State Border to Salwade Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-
07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad-Nashik Road To
Sinner-Shirdi Road)
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Part-A Road Work
SITE CLEARANCE
Cutting down trees including trunks and branches
with girths above30cm to 60cm and stacking the
e- DSR Item
1 materials neatly with all lifts and lead of 1000m as Each 688.00 411.10 2,82,836.80
no. 2.01
directed and earth filling in the depression / pit if
any.
Cutting down trees including trunks and branches
with girths above 60cm to 90cm and stacking the
e- DSR Item
2 materials neatly with all lifts and lead of 1000m. as Each 535.00 683.10 3,65,458.50
no. 2.02
directed and earth filling in the depression/pit if any.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
TOTAL AMOUNT SITE CLEARANCE 57,76,103.14
EARTH WORK
Excavation for roadway in earth, soil of all sorts, sand,
gravel or soft murum including dressing section to the
required grade, camber and side slopes and conveying
e- DSR Item
11 the excavated materials with all lifts upto a lead of Cum 1,29,437.38 73.10 94,61,872.68
no. 2.11
50m. and spreading for embankment or stacking as
directed.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and fixing trap/ granite/ quartzite/ gneiss
guard stone/ indicator stones/ boundary stones of
e-DSR Item standard size and shape including fixing in block of
20 Cum 1,746.00 885.10 15,45,384.60
No. 6.01(c) Fixing in M-15 R.C.C. 1:4:8 standard size with white
washing etc.complete
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
DENSE BITUMINOUS MACADAM: Proving and
laying dense bituminous macadam using crushed
aggregates of Grading 1, premixed with bituminous
binder of specified grade of Bitumen @ 4.50 per cent
by weight of total mix and filler, transported to site
with VTS , laid over a previously prepared surface,
finished to the required grade, level, alignment, and
e- DSR Item
rolling to achieve the desired density for 76-100 mm Cum 14,491.64 7320.45 10,60,85,353.49
no. 3.44
compacted thickness .USING Batch mix type
hot mix plant with SCADA, Sensor Paver,
Vibratory roller with Stone Dust filler . (VG-30 bulk
bitumen rates are considered to arrive at rates)
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and laying in-situ M40 Grade unreinforced
plain cement concrete pavement over a prepared sub
base with 43 grade cement ,coarse and fine aggregate (
natural sand/ VSI grade finely washed crushed sand)
conforming to IS 383, using fine and coarse aggregates
combined gradation as per Table 600-3 of MORTH
Specification 2013,mixed in a batching and mixing
plant/ non tilting mixer and Weigh batcher as per
approved mix design, admixtures, transporting to site,
spreading, laying with approved make
paver,compacted and finished in a continuous
e- DSR Item
30 operation, finishing to lines and grades as directed by Cum 17,955.00 6797.69 12,20,52,523.95
no. 5.03
Engineer-in-charge and curing by curing compound
/by providing cement vata in cement Mortar 1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at
bottom and 40 mm at top with depth of 75mm and
maintaining the same throughout curing period by
any other method approved by Engineer-in-charge.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and fixing Cautionary/Warning sign
boards in Equilateral Triangle size of ...... mm out of
.....mm aluminum sheet bonded with white retro
reflective sheeting of Class B ( Type IV High intensity
micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective
specified back ground, border and back side
retoreflctive symbols, letters, numerals, arrow as per
IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on
back side with grey stove enamel paint and supported
on one no. of M. S. angle iron post of size 65 mm X 65
mm X 6 mm, 3.45 m long, duly painted with with flat
e- DSR
33 oil paint having alternate black and white bands of 25
Item no. 6.29
cm width including G.I. fixtures etc; fixing the boards
in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class B (
Type IV High intensity micro-prismatic grade
sheeting-HIP) shall have 7 years written warranty
from the manufacturer and authorised distributor/
convertor issued for field performance including the
screen printed areas and cut-out sheeting and cut-out
durable transparent overlay film and this warranty
certificate in original should be submitted to the
Engineer in charge by the contractor/supplier.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and fixing of retro- reflectorised
informatory sign board rectangular/Square in shape
having area less than 0.9 square meter made out of
...mm aluminum sheet bonded with white retro
reflective sheeting of Class ...( Type IV High intensity
micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective
specified back ground, border and back side
retoreflctive symbols, letters, numerals, arrow as per
IRC:67-2012 Table No 8.3, supported with back
support frame 25mm x 25mm x 3mm, duly painted on
back side with two coats of grey stove enamel paint
and supported on one no. mild steel angle iron post 75
e- DSR Item mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the
35 ground by means of properly designed foundation
no. 6.33
with M25 grade cement concrete 45 cm x 45 cm x 60
cm, 60 cm below ground level as per approved
drawing The angle iron post shall be duly painted
with one coat of epoxy primer and two coats of epoxy
finish paints having alternate black and white bands
of 25 cm width including GI fixures and
transportation etc.complete.The nut bolts of board
with angle iron post/supporting structure after fixing
at site has to be electrically welded. Class B ( Type IV
High intensity micro-prismatic grade sheeting-HIP)
sheeting shall have 7 years written warranty from the
manufacturer and authorised distributor/convertor
issued for field performance including the screen
printed areas and cut-out sheeting and cut-out
a 2mm aluminum sheet Class B Sqm - 7657.10 -
b 4mm aluminum composite material Class B Sqm - 7770.10 -
d 4mm aluminum composite material Class C Each - 10518.10 -
Providing and fixing Cautionary / Warning sign
boards in Octagone size of_ mm made out of ...mm
aluminum sheet bonded with white retroreflective
sheeting of ClassB (Type IV High intensity micro-
prismatic grade sheeting-HIP) having pressure
sensitive / heat activated adhesive retoreflective
specified background ,border and back side
retoreflctive symbols, letters, numerals ,arrow as per
IRC:67-2012 Table No 8.3 Supported with back
support frame 25mmx25mmx3mm, duly painted on
backside with greystove enamel paint and supported
on one no.of M.S. angle iron post of size
e- DSR Item 65mmX65mmX6mm, 3.45 m long, duly painted with
36
no. 6.31 with flat oil paint having alternate black and white 5
cm width including G.I.fixtures etc; fixing the boards
in M25 grade concrete block of size 60cmX60cmX75cm
including transportation etc; complete. ClassB (Type
IV High intensity micro-prismatic grade sheeting-HIP)
shall have 7 years written warranty from the
manufacturer and authorised distribut or /convertor
issued for field performance including the screen
printed are as and cut- out sheeting and cut-out
durable transparent overlay film and this warranty
certificate in original should be submitted to the
Engineer in charge by the contractor /supplier.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and fixing informatory sign boards of
size60cmx80 cm made out of 14guage Aluminum
sheet bonded with IRC Specified colour of
retroreflectiv sheeting of Type IV High Intensity Micro-
Prismatic Grade Sheeting (HIP) having pressure
sensitive / heat activated adhesive, IRC Specified
colour retroreflective cut out border & messages
having pressure sensitive adhesive having border &
messages in IRC Specified colour back ground
e-DSR Item including M.S.angle iron post of size
37 Nos. 126.00 6325.10 7,96,962.60
No.6.51 65mmX65mmX6mm, 3.65m long, duly painted with
flat oil paint having alternate black and white bands
of 25 cm width including G.I. fixtures etc; fixing the
boards in 1:4:8 concrete block of size
60cmX60cmX75cm including transportation etc;
complete.Alluminium sheet Type IV High Intensity
Micro-Prismatic Grade Sheeting
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and erecting Overhead signs made out of
4mm aluminum composite material aluminum sheet
bonded with white retro reflective sheeting of Class C
( Type IV High intensity micro-prismatic grade
sheeting-HIP) having pressure sensitive/heat
activated adhesive retoreflective specified back
ground, border and back side retoreflctive symbols,
letters, numerals, arrow as per IRC:67-2012, with
designed back support frame of mild steel angle with
vertical and lateral clearance given in clause 801 and
802, duly painted on back side with two coats of grey
stove enamel paint and installed as per clause 802.6
over a designed support system of structural steel
e-DSR Item work trestles and trusses of sections and type as per
40 Sqm 135.00 8486.10 11,45,623.50
No. 6.35(d) structural design requirements and approved plans
including painting with one coat of epoxy primer and
two coats of epoxy finish paint.The nut bolts of board
with angle iron post/supporting structure after fixing
at site has to be electrically welded. Class B ( Type IV
High intensity micro-prismatic grade sheeting-HIP)
sheeting shall have 7 years written warranty from the
manufacturer and authorised distributor/convertor
issued for field performance including the screen
printed areas and cut-out sheeting and cut-out
durable transparent overlay film and this warranty
certificate in original should be submitted to the
Engineer in charge by the contractor /supplier. This
item does not include the cost of structural steel work
required for support system.
Providing, fabricating and erecting at site of work the
tubular steel structure (shed) as per standard design
and specifications having various spans in between
trusses and in multiples of standard length of bays as
specified as per standard specifications, inclusive of
cost ofsteel tubular trusses, tubular columns purlins,
e-DSR Item tie runners, foundation bolts, base plates, nuts and
41 MT 6.00 82972.10 4,97,832.60
No. 23.07 bolts, welding wherever required etc. as per detailed
drawing inclusive of one coat of anticorrosive paint
and two coats of oil painting of approved quality and
shade etc. complete. Spec. No. : As directed by
Engineer-in-charge.
Improvement to State Border to Salwade Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-
07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad-Nashik Road To
Sinner-Shirdi Road)
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and erecting Overhead signs made out of
4mm aluminum composite material aluminum sheet
bonded with white retro reflective sheeting of Class C
( Type IV High intensity micro-prismatic grade
sheeting-HIP) having pressure sensitive/heat
activated adhesive retoreflective specified back
ground, border and back side retoreflctive symbols,
letters, numerals, arrow as per IRC:67-2012, with
designed back support frame of mild steel angle with
vertical and lateral clearance given in clause 801 and
802, duly painted on back side with two coats of grey
stove enamel paint and installed as per clause 802.6
over a designed support system of structural steel
e-DSR Item work trestles and trusses of sections and type as per
42 structural design requirements and approved plans Sqm 13.40 8486.10 1,13,676.40
No. 6.35(d)
including painting with one coat of epoxy primer and
two coats of epoxy finish paint.The nut bolts of board
with angle iron post/supporting structure after fixing
at site has to be electrically welded. Class B ( Type IV
High intensity micro-prismatic grade sheeting-HIP)
sheeting shall have 7 years written warranty from the
manufacturer and authorised distributor/convertor
issued for field performance including the screen
printed areas and cut-out sheeting and cut-out
durable transparent overlay film and this warranty
certificate in original should be submitted to the
Engineer in charge by the contractor /supplier. This
item does not include the cost of structural steel work
required for support system.
Road Marking with Hot Applied Thermoplastic
Compound with Reflectorizing Glass Beads on
Bituminous Surface- Providing and laying of hot
applied thermoplastic compound 2.5 mm thick
e- DSR Item
43 includingreflectorizing glass beads @ 250 gms per Sqm 11,943.30 666.10 79,55,432.13
no. 6.12 a
Sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 .The finished
surface to be level, uniform and free from streaks and
holes.complete.
Providing and fixing R.C.C. 5th Km. stones, on N.H./
S.H./ M.D.R. etc. including painting, numbering etc
e-DSR Item
44 complete as per IRC design for highway km. stones Each 6.00 4265.10 25,590.60
No. 6.02(c)
and fixing in standard size c.c. 1:4:8 block complete.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Road Delineators: Supplying and installation of
delineators (Roadway Indicators, Hazard markers,
Object markers) 80 to 100 cm high above ground level,
painted black and white in 15 cm wide strips, fitted
e- DSR Item with 80x100mm rectangular or 75mm dia. Circular
48 Each 212.00 1043.10 2,21,137.20
no. 6.15 reflectorised panels at the top, buried or pressed into
the ground and confirming to I.R.C. 79 and the
drawings
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and fixing trap/ granite/ quartzite/ gneiss
guard stone/ indicator stones/ boundary stones of
e-DSR Item standard size and shape including fixing in block of
52 Each 1,746.00 423.10 7,38,732.60
No. 6.01(a) Fixing in Block of Standard Size of CC 1:4:8 standard
size with white washing etc.complete
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and laying plain in situ / ready mix M-25
cement concrete of trap / granite / quartzite / gneiss
/ crushed stone metal mechanically mixed , placed in
foundation and compacted by vibration including
necessary bailing out water , curing curing concrete
e-DSR Item batch mix plant / pan mixer with fine agreegates of
56 Cum 3,710.70 6867.40 2,54,82,861.18
No. 17.29 required specifications (Natural sand / VSI sand
finely washed etc) (excluding dewatering by pump )
for 14 days RCC Grade.With Concrete Mixer
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and laying of filter media with granular
materials / stone crushed aggregates satisfying the
requirements laid down in clause 2504.2.2 of MoRTH
specifications to a thickness of not less than 600 mm
e-DSR Item with smaller size towards the soil and bigger size
63 Cum - 1559.54 -
No. 12.72 towards the wall and provided over the entire surface
behind abutment, wing wall and return wall to the
full height compacted to a firm condition as per
drawing and technical specifications etc. complete.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Clearing and grubbing road land including uprooting
rank vegetation, grass, bushes, shrubs, saplings and
trees girth up to 300 mm, removal of stumps of trees
e- DSR Item cut earlier and disposal of unserviceable materials and
69 Sqm 1.50 9.10 13.65
no. 2.09 stacking of serviceable material to be used or
auctioned up to a lead of 1000 meters including
removal and disposal of top organic soil not
exceeding 150 mm in thickness.
Excavation for roadway in earth, soil of all sorts, sand,
gravel or soft murum including dressing section to the
e- DSR Item required grade, camber and side slope sand conveying
70 Cum 6,495.00 73.10 4,74,784.50
no. 2.11 the excavated materials with all lifts upto a lead of
50m. and spreading for embankment or stacking as
directed.
Scarifying the existing granular road surface to a
e- DSR Item
71 depth of 50 mm and disposal of scarified material Sqm 19,625.00 38.10 7,47,712.50
no. 3.09
within all lifts and leads upto 1000 meters.
Providing earth work in embankment with approved
materials obtained from other sources upto lead of
50m. including all lifts, laying in layers of 20cm. to
30cm. thickness breaking clods, dressing to the
e- DSR Item
72 required lines, curves, grades & section, watering and Cum 26,141.27 706.88 1,84,78,742.35
no. 2.28
compaction with vibratory roller with V-Sat
attachment to achieve not less than 97 % of standard
proctor density etc. complete ( Material obtained
from Other sources)
Conveying materials obtained from road cutting
including all lifts, laying in layers of 20cm to 30cm.
breaking clods, dressing to the required lines, curves,
e- DSR Item grades and section, watering and compacting to not
73 Cum 6,460.00 139.10 8,98,586.00
no. 2.25 less than 97% of standard Proctor density for a lead of
over 50m. to 300m. inclusive from the site of
excavation to the site of deposition as directed.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Footpaths and Separators -- Construction of
footpath/separator by providing a 150 mm
compacted granular sub base as per clause 401 and 25
e- DSR Item
77 mm thick cement concrete grade M15, over laid with Sqm 1,169.58 882.07 10,31,651.43
no. 7.29
pre-cast concrete tiles in cement mortar 1:3 including
provision of all drainage arrangements but excluding
kerb channel.
Prime coat - Providing and applying primer coat with
bitumen emulsion on prepared surface of granular
e- DSR Item
78 Base including cleaning of road surface and spraying, Sqm. 33,930.75 21.61 7,33,243.55
no. 3.29
primer at the rate of 0.60 kg/Sqm using mechanical
means.
Providing and applying tack coat on the prepared
surface heating by fames in Boiler and spraying
e- DSR Item
79 bitumen set footed in bitumen boller on B.T. surface Sqm. 33,625.95 11.79 3,96,449.97
no. 3.30
2.5 kg/10 Sqm.(VG-30 bulk bitumen rates are
considered to arrive at rates)
Providing and applying tack coat on the prepared
surface heating by fames in Boiler and spraying
e- DSR Item
80 bitumen with sprayer on Dry / Hungry B.T. surface 3 Sqm. 33,930.75 13.91 4,71,976.76
no. 3.31
kg/10 Sqm. (VG-30 bulk bitumen rates are considered
to arrive at rates)
DENSE BITUMINOUS MACADAM: Proving and
laying dense bituminous macadam using crushed
aggregates of Grading 1, premixed with bituminous
binder of specified grade of Bitumen @ 4.50 per cent
by weight of total mix and filler, transported to site
with VTS , laid over a previously prepared surface,
e- DSR Item finished to the required grade, level, alignment, and
81 Cum 1,681.30 7320.45 1,23,07,862.34
no. 3.44 rolling to achieve the desired density for 76-100 mm
compacted thickness .USING Batch mix type
hot mix plant with SCADA, Sensor Paver,
Vibratory roller with Stone Dust filler. (VG-30 bulk
bitumen rates are considered to arrive at rates)
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and fixing Cautionary/Warning sign
boards in Equilateral Triangle size of ...... mm out of
.....mm aluminum sheet bonded with white retro
reflective sheeting of Class B ( Type IV High intensity
micro-prismatic grade sheeting-HIP) having pressure
sensitive/heat activated adhesive retoreflective
specified back ground, border and back side
retoreflctive symbols, letters, numerals, arrow as per
IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on
back side with grey stove enamel paint and supported
on one no. of M. S. angle iron post of size 65 mm X 65
mm X 6 mm, 3.45 m long, duly painted with with flat
e- DSR
84 oil paint having alternate black and white bands of 25
Item no. 6.29
cm width including G.I. fixtures etc; fixing the boards
in M25 grade concrete block of size 60cm X 60cm X
75cm including transportation etc; complete. Class B (
Type IV High intensity micro-prismatic grade
sheeting-HIP) shall have 7 years written warranty
from the manufacturer and authorised distributor/
convertor issued for field performance including the
screen printed areas and cut-out sheeting and cut-out
durable transparent overlay film and this warranty
certificate in original should be submitted to the
Engineer in charge by the contractor/supplier.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Providing and fixing Cautionary / Warning sign
boards in Octagone size of_ mm made out of ...mm
aluminum sheet bonded with white retroreflective
sheeting of ClassB (Type IV High intensity micro-
prismatic grade sheeting-HIP) having pressure
sensitive / heat activated adhesive retoreflective
specified background ,border and back side
retoreflctive symbols, letters, numerals ,arrow as per
IRC:67-2012 Table No 8.3 Supported with back
support frame 25mmx25mmx3mm, duly painted on
backside with greystove enamel paint and supported
on one no.of M.S. angle iron post of size
e- DSR Item 65mmX65mmX6mm, 3.45 m long, duly painted with
86
no. 6.31 with flat oil paint having alternate black and white 5
cm width including G.I.fixtures etc; fixing the boards
in M25 grade concrete block of size 60cmX60cmX75cm
including transportation etc; complete. ClassB (Type
IV High intensity micro-prismatic grade sheeting-HIP)
shall have 7 years written warranty from the
manufacturer and authorised distribut or /convertor
issued for field performance including the screen
printed are as and cut- out sheeting and cut-out
durable transparent overlay film and this warranty
certificate in original should be submitted to the
Engineer in charge by the contractor /supplier.
Abstract
Sr. No. Item Code Item Unit Quantity Rate (Rs.) Amount
Road Marking with Hot Applied Thermoplastic
Compound with Reflectorizing Glass Beads on
Bituminous Surface- Providing and laying of hot
applied thermoplastic compound 2.5 mm thick
e- DSR Item
88 includingreflectorizing glass beads @ 250 gms per Sqm 1,305.96 666.10 8,69,896.63
no. 6.12 a
Sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35 .The finished
surface to be level, uniform and free from streaks and
holes.complete.
Road Delineators: Supplying and installation of
delineators (Roadway Indicators, Hazard markers,
Object markers) 80 to 100 cm high above ground level,
e- DSR Item painted black and white in 15 cm wide strips, fitted
89 Each 1,300.00 1043.10 13,56,030.00
no. 6.15 with 80x100mm rectangular or 75mm dia. Circular
reflectorised panels at the top, buried or pressed into
the ground and confirming to I.R.C. 79 and the
drawings
Supplying and Fixing of Molded Shank Raised
Pavement Markers / Cat's Eye made of polycarbonate
and ABS moulded body and reflective panels with
micro prismatic lens capable of providing total
internal reflection of the light entering the lens face
and shall support a load of 16000 kg tested in
accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97 DO III Dt 11.06. 1997. The
height, width and length shall not exceed 50 mm, 100
mm and 102 +/- 2 mm and with minimum reflective
area of 13 Sqcm on each side and the slope to the base
e- DSR Item shall be 35 +/- 5 degree. The strength of detachment
90 Each 2,116.00 459.10 9,71,455.60
no. 6.09 of the integrated cylindrical shanks, (of diameter not
less than 19 +/- 2 mm and height not less than 30+/- 2
mm) from the body is to be a minimum value of 500
Kg. Fixing will be by drilling holes on the road for the
shanks to go inside, without nails and using epoxy
resin based adhesive as per manufacturer's
recommendation and complete as directed by the
engineer.The contractor shall submit a two year
warranty for satisfactory field performance including
stipulated retroreflectance of the reflecting panel, to
the Engineer.
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved Sqm
4 17791.00 3.88 275760.50
Shoulders Flexible Pavement in Open Country
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway Sqm
2 3990.00 5.28 42094.50
with Rigid Pavement including RCC Drain in Built-Ups
Total 375095.00
8 Dismantling of Stone including cutting of earth, foundation and disposal of dismantled material with all lifts and lead
upto 1000 m and back filling of pit.
a Dismantling 5th Km. Stone each 4 4.00
b Ordinary Km. Stone each 21 21.00
c Hectometer Stone each 94 94.00
9 Dismantling of barbed wire fencing/ wire mesh fencing including posts, foundation concrete, back filling of pit by metre 2 2818.89 5637.78
manual means including disposal of dismantled material with all lifts andup to a lead of 1000 metres, stacking
serviceable material and unserviceable materials separately.
10 Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under each 159 159.00
the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the
serviceable and unserviceable material separately
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
EARTH WORK
11 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the Cum 129437.38
required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and
spreading for embankment or stacking as directed.
12 Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and Cum 71249.94
side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or
stacking as directed.
13 Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and Cum 35624.97
conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.
Excavation for roadway in hard rock by controlled blasting including dressing section to the required grade, camber Cum 1187.50
14 and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for
embankment or stocking as directed.
15 Scarifying the existing granular road surface to a depth of 50 mm and disposal of scarified material within all lifts and Sqm
leads upto 1000 metres.
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway 5 3990.00 5.250 104737.50
with Rigid Pavement including RCC Drain in Built-Ups
Total 104737.50
16 Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking Cum
serviceable and unserviceable materials separately etc. complete.
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders 1 9540.00 7.00 0.05 3339.00
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved 1 17791.00 5.25 0.05 4670.14
Shoulders Flexible Pavement in Open Country
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway 1 3990.00 5.25 0.05 1047.37
with Rigid Pavement including RCC Drain in Built-Ups
Total 9056.51
17 Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. cum
including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves,
grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor
density etc. complete. (Material obtained from departmental Land)
For Embankment Work
Fill as per Qty sheet by MX Road 337007.77
Less Qty of Item No. 20 -100343.66
Total 236664.11
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
18 cum
Construction of Subgrade and Earthen Shoulders with approved material obtained from borrow pits
For Subgrade
Carriageway
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
2 9540.00 4.360 0.500 41594.40
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
2 17791.00 5.235 0.500 20887.65
Shoulders Flexible Pavement in Open Country
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
2 3990.00 7.900 0.500 31521.00
with Rigid Pavement including RCC Drain in Built-Ups
Below 150 mm of Earthen Shoulder
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
Flexible Pavement in Open Country 2 9540.00 1.88 0.080 2869.63
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
2 17791.00 1.88 0.080 5351.53
Shoulders Flexible Pavement in Open Country
Merging and Diverging as per TCS
A)10m C/W to 15.8.0 m C/W 4 87.00 1.45 0.500 252.30
Total 102476.51
19 Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, cum 100343.66
not less than 97% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with vibratory roller..
20 Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated cum 2 27331.00 0.40 area 21864.80
stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.
SUB-BASE, BASE-COURSE
21 Construction of Granular Sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, cum
carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface
and compacting with vibratory roller to achieve the desired density, complete as per clause 401-- Plant Mix Method
and Grading - III Material.
Carriageway
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
1 3990.00 15.80 0.150 9456.30
with Rigid Pavement including RCC Drain in Built-Ups
Top 150 mm of Earthen Shoulders
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
Flexible Pavement in Open Country 2 9540.00 1.65 0.150 4722.30
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
Shoulders Flexible Pavement in Open Country 2 17791.00 1.65 0.150 8806.55
Total 22985.15
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
Cement Treated Crushed Rock or combination as per clause 403.2 and table 400.4 in Sub base/ Base -Providing, Cum
laying and spreading Material on a prepared sub grade, adding the designed quantity of cement to the spread
Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC
to achieve the desired unconfined compressive strength and to form a layer of sub-base/base course.
22
B) For Base Course
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
2 9540.00 7.32 0.2 27933.12
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
2 17791.00 9.07 0.2 64545.75
Shoulders Flexible Pavement in Open Country
Merging and Diverging as per TCS
A)10m C/W to 15.8.0 m C/W 4 87.00 1.45 0.15 75.69
Total 92554.558
23 Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam Cum
specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material
by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and
compacting with vibratory roller to acheive the desired density. Laying By Grader/Paver
Carriageway
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
2 9540.00 1.58 0.15 4521.96
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
2 17791.00 2.46 0.15 13103.07
Shoulders Flexible Pavement in Open Country
Merging and Diverging as per TCS
A)10m C/W to 15.8.0 m C/W 4 87.00 1.45 0.15 75.69
Total 17700.72
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
PAVEMENT
24 Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base Sqm.
including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means.
Carriageway
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
2 9540.00 1.50 28620.00
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
Shoulders Flexible Pavement in Open Country 2 17791.00 2.375 84507.25
Carriageway
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
2 9540.00 1.5 28620.00
Flexible Pavement in Open Country
- 1 9540.00 10.00 95400.00
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
Shoulders Flexible Pavement in Open Country
2 17791.00 2.375 84507.25
- 1 17791.00 10.00 177910.00
Merging and Diverging as per TCS
A)10m C/W to 15.8.0 m C/W 4 87.00 1.45 504.60
Total 386941.85
26 Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed
in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates)
Carriageway
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders 1 9540.00 10.00 95400.00
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved 1 17791.00 10.00 177910.00
Shoulders Flexible Pavement in Open Country
Merging and Diverging as per TCS
A)10m C/W to 15.8.0 m C/W 4 87.00 1.45 504.60
Total 273814.60
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
27 DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates
of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix
and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level,
alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type
hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler . (VG-30 bulk bitumen rates
are considered to arrive at rates)
Carriageway
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders 1 9540.00 10.00 0.05 4770.00
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved 1 17791.00 10.00 0.05 8895.50
Shoulders Flexible Pavement in Open Country
For profile correction Existing pavement
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders 1 9540.00 7.00 Area 66780.00
Flexible Pavement in Open Country
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved 1 17791.00 5.25 Area 93402.75
Shoulders Flexible Pavement in Open Country
For profile correction Existing pavement 10 % 800.91
Carriageway
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
Flexible Pavement in Open Country 1 9540.00 10.00 0.030 2862.00
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
1 17791.00 10.00 0.030 5337.30
Shoulders Flexible Pavement in Open Country
Merging and Diverging as per TCS
A)10m C/W to 15.8.0 m C/W 4 87.00 1.45 0.030 15.14
Total 8214.44
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
29 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( Cum
natural sand/ VSI grade finely washed crushed sand)conforming to IS: 383, the size of coarse aggregate not exceeding
25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial
length construction, concrete strength not to be less than 10 Mpa at 7days, mixed in a batching plant/ Weigh batch
mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as
approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of
sub-grade surface if required etc. complete.
Carriageway
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
1 3990.00 15.80 0.150 9456.30
with Rigid Pavement including RCC Drain in Built-Ups
Total 9456.30
30 Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete Sqm
pavement including all materials and labour complete.
Carriageway
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
with Rigid Pavement including RCC Drain in Built-Ups 1 3990.00 15.80 63042.00
Total 63042.00
31 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base Cum
with 43 grade cement ,coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming
to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification
2013,mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design,
admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a
continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing
compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at
bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other
method approved by Engineer-in-charge.
Carriageway
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
2 3990.00 7.50 0.300 17955.00
with Rigid Pavement including RCC Drain in Built-Ups
Total 17955.00
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
32 Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of No
required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary
cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads
lubricating half length with bituminous paint as directed etc. complete
Carriageway
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
44300.00 44300.00
with Rigid Pavement including RCC Drain in Built-Ups
Total 44300.00
33 Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 No
cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of
approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500,
chairs with proper alignment etc. complete.
Carriageway
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
12470 12470.00
with Rigid Pavement including RCC Drain in Built-Ups
Total 12470.00
TRAFFIC SIGNS, MARKINGS AND ROAD APPURTENANCES
34 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of ...... mm out of .....mm
aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic
grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border
and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one
no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity
micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised
distributor/ convertor issued for field performance including the screen printed areas and cut-out sheeting and
cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer
in charge by the contractor/supplier.
f 900 mm made out of 4mm aluminum composite material Each 290.00 290.00
b 600 mm made out of 3mm aluminum composite material Each 0.00 0.00
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
Providing and fixing Mandatory/Regulatory sign boards in circular shape of .... mm dia made out of .....mm
aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic
grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border
and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back
support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one
no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having
alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete
35
block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-
prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised
distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-
out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in
charge by the contractor/supplier.
600 mm dia made out of 3mm aluminum composite material Each 90.00 90.00
36 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than
0.9 square meter made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B( Type IV
High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective
specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table
No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey
stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly
fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60
cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of
epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including
GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after
fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP)
sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for
field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay
film and this warranty certificate in original should be submitted to the Engineer in charge by the
contractor/supplier.
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
1 6084.00 0.100 608.40
Shoulders Flexible Pavement in Open Country
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
2 1329.00 0.100 265.80
with Rigid Pavement including RCC Drain in Built-Ups
(ii) White Strips of 150mm wide at Road Edge
TCS-I:Strengthening and widening of Existing Two Lane Carriageway to 2-Lane Carriageway with Paved Shoulders
Flexible Pavement in Open Country 2 9600.00 0.150 2,880.00
TCS-II:Strengthening and widening of Existing Intermediate Lane Carriageway to 2-Lane Carriageway with Paved
2 18250.00 0.150 5,475.00
Shoulders Flexible Pavement in Open Country
TCS-III:-Reconstruction and Widening of Existing Intermediate Lane Carriageway to 4-Lane Divided Carriageway
4 3990.00 0.150 2,394.00
with Rigid Pavement including RCC Drain in Built-Ups
Total 11,943.30
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
45 Providing and fixing R.C.C. 5th Km. stones, on N.H./ S.H./ M.D.R. etc. including painting, numbering etc complete each 6 6.00
as per IRC design for highway km. stones and fixing in standard size c.c. 1:4:8 block complete.
46 Providing & fixing R.C.C. 1:2:4 ordinary km. Stones including painting numbering etc. Complete for N.H. each 26 26.00
/ S.H./ M.D.R. etc. as per IRC design for highway km stone and fixing in standard size C.C. 1:4:8 block etc.
complete.
47 Providing and fixing R.C.C. 200 metre stones as per I.R.C. standard including fixing in standard size each 127 127.00
C.C.1:4:8 block including curing , painting lettering etc. complete.
48 Providing and fixing trap/ granite/ quartzite/ gneiss guard stone/ indicator stones/ boundary stones of standard each 254 254.00
size and shape including fixing in block of Fixing in M-15 R.C.C. 1:4:8 standard size with white washing etc.complete
49 Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) each 212 212.00
80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm
rectangular or 75mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to
I.R.C. 79 and the drawings
50 Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W metal beam crash meter 1 2095.00 2095.00
barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level,
all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal
beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as
per clause 810)""
51 Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS each 2399 2399.00
moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the
light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and
complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The
height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13
Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated
cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be
a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and
using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the
engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated
retroreflectance of the reflecting panel, to the Engineer.
52 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at RM 2 0.00 0.00
top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened
glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe
etc. complete
de Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07) Km.215/00 To 244/00 Tal-Kopargaon Division-Sangamner Dist-Ahmadnagar (Section-Aurangabad
Details of Quantity Calculation of Road Work
Sr. No. Item Unit Nos. Length Width Height Quantity
53 Providing and fixing trap/ granite/ quartzite/ gneiss guard stone/ indicator stones/ boundary stones of standard each 1746 1746.00
size and shape including fixing in block of Fixing in Block of Standard Size of CC 1:4:8 standard size with white
washing etc.complete
54 Street Lighting (Providing and erecting street light mounted on a steel circular hollow pole of standard specifications each
for street lighting, 9 m high, 50 m c/c staggered spacing, 1.8 m overhang on both sides if fixed in the median and on
one side if fixed on the footpath, fitted with sodium vapour lamp and fixed firmly in concrete foundation.)
57 Providing and laying plain in situ / ready mix M-25 cement concrete of trap / granite / quartzite / gneiss / crushed Cum
stone metal mechanically mixed , placed in foundation and compacted by vibration including necessary bailing out
water , curing curing concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural
sand / VSI sand finely washed etc) (excluding dewatering by pump ) for 14 days RCC Grade.With Concrete Mixer
65 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983)
embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2,setting the same in C.M. 1:2,
including the required excavation in any strata and removing the excavated stuff any where in city and redoing the
surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
a) Single Row for Utility Duct of diameter 600 mm across the road @200m c/c in builtup area metre 21 15.00 315.00
21 7.50 157.50
Single Row for Utility Duct of diameter 600 mm across the road @500m c/c in open country 56 15.00 840.00
Total 1312.50
67 RCC Utility Chamber 900x900 mm inner size with 650x650 mm steel heavy duty cover @ 1000 m c/c Each 0 0.00
MISCELLANEOUS
68 Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with Each
decayed farm yard/sludge mannure, planting the saplings, backfilling the trench, watering, and maintaining the
plants for one year.
Avanue Tree Plantation (As per IRC:21) In Single row @ 20m interval both side in sttagerad way in along open area 0 0.00 0.00
69 Half brick circular tree guard, in 2nd class brick, internal diametre 1.25 metres, and height 1.2 metres, above ground Each 0.00 0.00
and 0.20 metre below ground, bottom two courses laid dry, and top three courses in cement mortar 1:6 ( 1 cement 6
70 sand) and the
Providing rainintermediate coursesarrangement
water harvesting being in dry as
honey comb
shown in masonry, as peralldesign
drawing with complete.
materials etc., with all lifts and leads Each 0.00 0.00
complete as directed by the engineer
EMP
Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with Each
71 decayed farm yard/sludge mannure, planting the saplings, backfilling the trench, watering, and maintaining the
plants for one year.
Compensatory Afforestation (10 time of tree cuting) 19100 19100.00
Total 19100.00
Improvement to State Border to Salwade Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07)
Details of Quantity Calculation of Major Junction Improvement
Sr. No. Item Unit Nos. Length Width Height Quantity
1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300
mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used
or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
T- TYPE NH JUNCTION
47.0 m Long Straight Section ; W=6.0m 2 47.00 3.50 0.030 9.87
90.0 m Long Taper Section ; W=3.5m 2 90.00 3.50 0.030 18.90
2 90.00 5.50 0.030 14.85
25 m Long Straight. Section ; W=7.0 m 2 25.00 7.00 0.030 10.50
1 Area 591.29 0.030 17.74
1 Area 591.29 0.030 17.74
Total 89.60
Improvement to State Border to Salwade Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07)
Details of Quantity Calculation of Major Junction Improvement
Sr. No. Item Unit Nos. Length Width Height Quantity
15 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded metre
125mm below ground level over M-10 PCC finished neatly with C.M. 1:2,setting the same in C.M. 1:2, including the required
excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by
Engineering In-charge. Using Concrete Batching and Mixing Plant
at Junction Improvement for separator and Island
T- TYPE NH JUNCTION
For Median 1 370.03 370.03
1 185.12 185.12
For Divider 1 83.86 83.86
For Island 2 51.47 102.94
Total 741.95
16 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 mm out of 2mm aluminum sheet each 1 1.00
bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having
pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols,
letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted
on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45
m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc;
fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type
IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised
distributor/ convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the
contractor/supplier.
17 Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600 mm out of 3mm aluminum sheet each 3 3.00
bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having
pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols,
letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted
on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45
m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc;
fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type
IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised
distributor/ convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the
contractor/supplier.
Improvement to State Border to Salwade Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07)
Details of Quantity Calculation of Major Junction Improvement
Sr. No. Item Unit Nos. Length Width Height Quantity
18 Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 3mm aluminum sheet each 2 2.00
bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having
pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols,
letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted
on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45
m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc;
fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type
IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised
distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the
contractor/supplier.
19 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square sqm 9 1.00 0.90 8.10
metermade out of 4mm aluminum composite material aluminum sheet bonded with white retro reflective sheeting of Class C (
Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective
specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3,
supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint
and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of
properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved
drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having
alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with
angle iron post/supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity
micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised
distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the
contractor/supplier.
20 Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing
and laying of hot applied thermoplastic compound 2.5 mm thick includingreflectorizing glass beads @ 250 gms per sqm area,
thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free
from streaks and holes.complete.
Lane/centreline/edge marking/transverse and any other marking sqm
White Strips of 0.10 Mtrs. Wide and 3 Mtrs. Long @ 6.0 Mtrs. Interval at Road Centre 2 50.00 40.00 4.00
White Strips of 0.10 Mtrs. Wide and 30 Mtrs. Long Contineous 3 90.00 0.10 27.00
Digonal Marking 6 50.00 0.15 45.00
75 0.80 0.60 36.00
Stop Line 3 7.00 0.20 4.20
Giveway Line 30 0.60 0.20 3.60
Words- STOP 1 0.880 Area 0.88
Arrows -
Improvement to State Border to Salwade Brahmanwel Devala Lasalgaon Vinchur Savalivihar Bharwas Chas Road (SH-07)
Details of Quantity Calculation of Major Junction Improvement
Sr. No. Item Unit Nos. Length Width Height Quantity
Arrow Type (AM-11 & 12) 4 1.425 Area 5.70
Arrow Type (AM-09 & 10) 1 1.215 Area 1.22
Arrow Type (AM-08) 8 1.100 Area 8.80
Total 136.40
21 Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 cm each
high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular
reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and the drawings
55m tapered section (width transition 3.75 m to 11.0m) 1 55.00 7.535 0.200 82.89
Flared Portion 2 Area 82.50 0.200 33.00
2 Area 112.50 0.200 45.00
Total 160.89 1769.74
8 Construction of Median and Island with Soil Taken from Borrow Areas -- Construction of median and Island above cum
road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 407
17 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250
gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to
be level, uniform and free from streaks and holes all complete as per clause 803 of specifications.
55m tapered section (width transition 3.75 m to 11.0m) 2 55.00 7.535 0.200 165.77
Flared Portion 4 Area 82.50 0.200 66.00
4 Area 112.50 0.200 90.00
Total 321.77 3217.70
8 Construction of Median and Island with Soil Taken from Borrow Areas -- Construction of median and Island above cum
road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 407
16 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than sqm 2 1.00 0.90 1.80 18.00
0.9 square metermade out of 4mm aluminum composite material aluminum sheet bonded with white retro reflective
sheeting of Class C ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals,
arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on
back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75
mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly
painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of
25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron
post/supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity
micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and
authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting
and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the
Engineer in charge by the contractor/supplier.
Improvement to M.S.H-5 to undangaon halda khamkheda Shendhurni To District Border Road Dist. Aurangabad
Details of Quantity Calculation of Cross-Minor Junction Improvement (As per Dwg. No. 34 of MoST Std. Dwg. for Intersections)
Total No of Cross Minor Jn = 10 Nos
25m tapered section (width transition 3.75 m to 7.0m) 1 25.00 5.535 0.200 27.68
Flared Portion 1 Area 175.00 0.200 35.00
1 Area 312.50 0.200 62.50
1 Area 125.00 0.200 25.00
Total 150.18 1201.40
8 Construction of Median and Island with Soil Taken from Borrow Areas -- Construction of median and Island above cum
road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 407
17 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250
gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to
be level, uniform and free from streaks and holes all complete as per clause 803 of specifications.
9 Street Lighting (Providing and erecting street light mounted on a steel circular hollow pole of standard specifications for street lighting, 9 each 1 1.00
m high spaced 40 m apart, 1.8 m overhang on both sides if fixed in the median and on one side if fixed on the footpath, fitted with sodium
vapour lamp and fixed firmly in concrete foundation.)
Above 900 mm
C metre 0 12.330 0.000 721 0.0
Above 900 mm
C metre 0 12.500 0.000 721 0.0
a Over 10cm Wide On New Surface Sqm 4 10.950 0.900 39.420 302.00 11904.840
Providing and laying cement concrete blocks
e-DSR
of M15 grade flooring laid in cement mortar
18 Item No. cum 2 10.950 3.975 0.300 26.116 7497.84 195811.715
1:3 as per drawings and technical
14.77
specifications etc. complete.
Providing and laying in situ / ready mix
controlled grade of M20 of trap /granite
/quartzite /gneiss metal for RCC works in
cut off walls / curtain walls including
necessary scaffolding, centering, compacting
e-DSR by vibrator, finishing and curing etc.
19 Item No. complete. (with fully automatic micro cum
12.57 processor based PLC with SCADA enabled
with reversible drum type mixer/ concrete
batch mix plant (pan mixer) with fine
agreegates of required specifications
(Natural sand / VSI sand finely washed etc ),
excluding reinforcement)
Curtain Wall U/S 1 10.650 1.300 0.800 11.076
1 10.650 0.450 0.750 3.594
1 10.650 0.200 0.450 0.959
Curtain Wall D/S 1 10.650 1.650 0.550 9.665
1 10.650 0.750 0.750 5.991
1 10.650 0.450 0.750 3.594
1 10.650 0.200 0.450 0.959
Total 35.837 7038.84 2,52,252.67
Providing flexible apron of 100 cm thick
e-DSR
comprising of loose stone boulders weighing
20 Item No. Cum 1 10.950 9.000 1.000 98.550 1498.00 147627.900
not less than 40 kg beyond curtain wall etc.
14.81
complete.
Providing and laying pitching on slopes
laid over prepared filter media including
e-DSR boulder apron laid dry in front of toe of
21 Item No. embankment complete as per drawing Cum 4 3.975 6.350 0.300 30.290 2146.26 65009.142
14.72 and technical specifications etc. complete.
(by stone / boulder)
Providing and laying filter material
e-DSR
underneath pitching in slopes as per
22 Item No. Cum 4 3.975 6.350 0.150 15.145 3195.48 48,394.75
drawings and technical specifications etc.
14.74
complete.
23 Painting with approved enamel paint in two
e- DSR
coats including cleaning surface and lettering
Item no.
for________ stone etc. complete.
6.04
Up to 600 mm dia
A metre 0 12.830 0.000 311 0.0
Above 900 mm
C metre 0 12.830 0.000 721 0.0
a Over 10cm Wide On New Surface Sqm 4 12.200 0.900 43.920 302.00 13263.840
Providing and laying cement concrete blocks
e-DSR of M15 grade flooring laid in cement mortar
19 Item No. 1:3 as per drawings and technical cum 2 12.200 4.100 0.300 30.012 7497.84 225025.174
14.77 specifications etc. complete.
Estimate of Box Culvert 1x4.0x2.0 M (12.0 M Wide)
Sr. SOR Item
Item Unit Nos. Length Width Height Quantity Rate Amount
No. No.
Providing and laying in situ / ready mix
controlled grade of M20 of trap /granite
/quartzite /gneiss metal for RCC works in cut
off walls / curtain walls including necessary
scaffolding, centering, compacting by vibrator,
e-DSR finishing and curing etc. complete. (with fully
20 Item No. automatic micro processor based PLC with cum
12.57 SCADA enabled with reversible drum type
mixer/ concrete batch mix plant (pan mixer)
with fine agreegates of required specifications
(Natural sand / VSI sand finely washed etc ),
excluding reinforcement)
Up to 600 mm dia
A metre 0 11.830 0.000 311 0.0
Above 900 mm
C metre 0 11.830 0.000 721 0.0
a Over 10cm Wide On New Surface Sqm 4 15.050 0.900 54.180 302.00 16362.360
Providing and laying cement concrete blocks of
e-DSR
M15 grade flooring laid in cement mortar 1:3 as
23 Item No. cum 2 15.050 4.375 0.300 39.506 7497.84 296211.542
per drawings and technical specifications etc.
14.77
complete.
Providing and laying in situ / ready mix
controlled grade of M20 of trap /granite
/quartzite /gneiss metal for RCC works in cut off
walls / curtain walls including necessary
scaffolding, centering, compacting by vibrator,
e-DSR finishing and curing etc. complete. (with fully
24 Item No. automatic micro processor based PLC with cum
12.57 SCADA enabled with reversible drum type
mixer/ concrete batch mix plant (pan mixer) with
fine agreegates of required specifications (Natural
sand / VSI sand finely washed etc ), excluding
reinforcement)
Abutment
Footing 2 12.000 4.200 0.300 30.240
2 12.000 1.900 0.500 11.400
2 12.000 0.800 0.500 9.600
2 12.000 1.500 0.500 9.000
Retaining Wall
Footing 4 3.700 2.700 0.250 9.990
4 3.700 1.250 0.200 1.850
4 3.700 0.550 0.200 1.628
4 3.700 0.900 0.200 1.332
Pier
Footing 0 8.500 8.800 0.400 0.000
0 8.500 3.800 0.700 0.000
0 8.500 1.200 0.700 0.000
0 8.500 3.800 0.700 0.000
Total 75.040 7971.822 598205.51
Providing, cutting, bending, hooking, tying and
e- DSR Item laying in position TMT FE 500 steel bars for
5 MT
no. 14.01 reinforcement for all RCC works as per detailed
drawings etc. complete.
Abutment & Pier footing @ 80 kg/Cum 75.040 0.080 6.003 108934.430 653955.17
Quantity Calculation of Slab Culvert 1 x 6.00 M - 12.0 m wide
Sr.
SOR Item No. Item Unit Nos. Length Width Height Quantity Rate Amount
No.
Providing and laying in situ / ready mix M-20
plain cement concrete of trap /granite/quartzite/
gneiss metal for cast in citu piers, abutment,
returns, wings etc. including provision of "V"
shaped false joints to form suitable panels on the
faces to approve design with compacting by
vibrating and curing complete, including
plywood/steel form work centering ( excluding
dewatering by means of pump) and including
bailling out water and curing finishing in CM 1:3
etc. complete. as directed by engineer in charge
basic rate shall be increased for height above 5.00
e- DSR Item m in followinh manners
6
no. 17.39 (a) Height upto 5 M. (With Concrete Mixer)With
fine agreegates of
required specifications (Natural sand / VSI sand
finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra over
basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra for
every 2.50m rise.
Abutment
Footing 2 12.000 7.000 0.350 58.800
2 12.000 3.400 0.450 18.360
2 12.000 0.950 0.450 10.260
2 12.000 2.650 0.450 14.310
Independent Retaining Wall
Footing 4 0.200 3.100 0.200 0.496
Cost Estimate of Slab Bridge Span 2 x 6 Width 12 m
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
4 0.200 1.300 0.250 0.130
4 0.200 0.600 0.250 0.120
4 0.200 1.200 0.250 0.120
Pier
Footing 1 14.500 8.800 0.400 51.040
1 14.500 3.800 0.700 19.285
1 14.500 1.200 0.700 12.180
1 14.500 3.800 0.700 19.285
Total 204.386 7971.82 16,29,328.40
Providing and laying in situ / ready mix
M-20 plain cement concrete of trap
/granite/quartzite/ gneiss metal for cast
in citu piers, abutment, returns, wings etc.
including provision of "V" shaped false
joints to form suitable panels on the faces
to approve design with compacting by
vibrating and curing complete, including
plywood/steel form work centering (
excluding dewatering by means of pump)
and including bailling out water and
curing finishing in CM 1:3 etc. complete.
as directed by engineer in charge basic
e- DSR rate shall be increased for height above
7 Item no. 5.00 m in followinh manners cum
17.39 (a) Height upto 5 M. (With Concrete
Mixer)With fine agreegates of
required specifications (Natural sand /
VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra
over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent extra.
iv) Over 10 m Height, add 10 percent extra
for every 2.50m rise.
Sub-Structure
Surface Reinforcement @ 5 kg/Sqm MT -8.038 0.005 -0.040
Abutment, Abt Cap, Dirt Wall, Pier & Pier
MT 242.501 0.100 24.250
Cap @ 100 kg/Cum
Total 24.210 108934.43 26,37,292.14
Super Structure
Cost Estimate of Slab Bridge Span 2 x 6 Width 12 m
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Super Structure @ 100 kg/Cum MT 50.40 0.100 5.040
Kerb @ 60 kg/Cum MT 4.90 0.060 0.294
Total 5.334 108934.43 5,81,030.11
Providing weep holes in brick masonry
/plain/reinforced concrete abutment,
wing wall /return wall with 100mm
e-DSR diameter AC pipe extending through the
13 Item No. full width of the structure with slope of Each 28 0.550 15.400 424.00 6,529.60
17.37 1V: 20H towards drawing face as per
drawings and technical specifications etc.
complete.
Back filling behind abutment, wing wall
e-DSR
and return wall as per drawings and
14 Item No. Cum 2 -0.400 11.000 3.072 -27.034 778.32 -21,040.79
technical specifications etc. complete. (by
12.70
granular material)
Providing and laying of filter media with
granular materials/ stone crushed
aggregates satisfying the requirements
laid down in clause 2504.2.2 of MoRTH
specifications to a thickness of not less
e-DSR than 600 mm with smaller size towards
15 Item No. the soil and bigger size towards the wall Cum 2 11.000 0.600 3.072 40.550 1052.00 42659.021
12.72 and provided over the entire surface
behind abutment, wing wall and return
wall to the full height compacted to a firm
condition as per drawing and technical
specifications etc. complete.
2 12.000 24.000
1 12.000 12.000
2 12.000 24.000
4 4.972 19.888
Total 79.888 343.00 27401.6
Providing and filling joint sealing
e-DSR compound with coarse sand and 6%
18 Item No. bitumen by weight as per drawings and Meter 2 12.000 24.000 36.00 864.00
14.64 technical specifications etc.
complete.
Providing and laying of a strip seal
expansion joint catering to maximum
horizontal movement upto 70 mm to be
installed by the manufacturer / supplier
e-DSR to their authorized representative
19 Item No. ensuring compliance to the manufacturers RM 3 12.000 36.000 12160.00 437760.0
14.68 instruction for installation as per approved
drawings and standard specifications etc.
complete.
Cost Estimate of Slab Bridge Span 2 x 6 Width 12 m
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Providing and laying in situ / ready mix
M20 CC of trap/ granite/ quartzite/
gneiss metal for wearing course 8cm thick
including compacting, finishing, curing
e-DSR and filling in joints with bitumen etc.
20 Item No. complete. (with fully automatic micro sqm 1 19.600 7.000 137.200 6604.84 9,06,184.05
14.39 processor based PLC with SCADA
enabled concrete batch mix plant / pan
mixer with fine agreegates of required
specifications (Natural sand / VSI sand
finely washed etc )
a Over 10cm Wide On New Surface Sqm 4 19.200 0.900 69.120 302.00 20874.240
Providing and laying pitching on
slopes laid over prepared filter media
e-DSR including boulder apron laid dry in
28 Item No. front of toe of embankment complete Cum 4 -0.628 6.180 0.300 -4.657 2146.26 -9995.665
14.72 as per drawing and technical
specifications etc. complete.
(by stone/boulder)
Providing and laying filter material
e-DSR underneath pitching in slopes as per
29 Item No. drawings and technical specifications Cum 4 -0.628 6.180 0.150 -2.329 3195.48 -7,441.07
14.74 etc. complete.
Ordinary soils
Depth upto 3 m Cum
i) Head Wall 2 8.10 1.40 1.10 24.95
a Pipe Portion 1 9.70 3.30 0.55 17.61
Total 42.55 181.00 7,702.18
Providing and casting in situ / ready mix
PCC M15 grade of trap metal for coping to
head walls / parapet including centering,
form work, compaction and curing etc.
e- DSR complete. (with reversible drum type
46 Item no. mixer/ concrete batch mix plant (pan Cum
11.30 mixer) with SCADA with fine
agreegates of required specifications
(Natural sand / VSI sand finely
washed etc )
Abutment
Footing 2 12.000 5.500 0.300 39.600
2 12.000 2.500 0.500 15.000
2 12.000 0.800 0.500 9.600
2 12.000 2.200 0.500 13.200
Independent Retaining Wall
Footing 4 4.100 4.200 0.500 34.440
4 4.100 2.000 0.300 4.920
4 4.100 0.600 0.300 2.952
4 4.100 1.600 0.300 3.936
Pier
Footing 1 16.500 5.900 0.400 38.940
1 16.500 2.500 0.600 12.375
1 16.500 0.900 0.600 8.910
1 16.500 2.500 0.600 12.375
Total 196.248 7971.82 15,64,453.73
Cost Estimate of Slab Bridge Span 2 x 8 Width 12 m
Sr. SOR Item
Item Unit Nos. Length Width Height Quantity Rate Amount
No. No.
Providing and laying in situ / ready mix
M-20 plain cement concrete of trap
/granite/quartzite/ gneiss metal for cast
in citu piers, abutment, returns, wings
etc. including provision of "V" shaped
false joints to form suitable panels on the
faces to approve design with compacting
by vibrating and curing complete,
including plywood/steel form work
centering ( excluding dewatering by
means of pump) and including bailling
out water and curing finishing in CM 1:3
etc. complete. as directed by engineer in
e- DSR charge basic rate shall be increased for
8 Item no. height above 5.00 m in followinh cum
17.39 manners
(a) Height upto 5 M. (With Concrete
Mixer)With fine agreegates of
required specifications (Natural sand /
VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent extra
over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent
extra.
iv) Over 10 m Height, add 10 percent
extra for every 2.50m rise.
Sub-Structure
Surface Reinforcement @ 5 kg/Sqm MT 70.336 0.005 0.352
Abutment, Abt Cap, Dirt Wall, Pier &
MT 259.773 0.100 25.977
Pier Cap @ 100 kg/Cum
Total 26.329 108934.43 28,68,135.56
Super Structure
Super Structure @ 100 kg/Cum MT 86.40 0.100 8.640
Kerb @ 60 kg/Cum MT 7.45 0.060 0.447
Total 9.087 108934.43 9,89,861.02
Providing weep holes in brick masonry
/plain/reinforced concrete abutment,
wing wall /return wall with 100mm
e-DSR Item diameter AC pipe extending through the
14 Each 80 0.550 44.000 424.00 18,656.00
No. 17.37 full width of the structure with slope of
1V: 20H towards drawing face as per
drawings and technical specifications
etc. complete.
Back filling behind abutment, wing wall
e-DSR Item and return wall as per drawings and
15 Cum 2 3.500 11.000 4.510 347.270 778.32 2,70,287.19
No. 12.70 technical specifications etc. complete. (by
granular material)
Providing and laying of filter media with
granular materials/ stone crushed
aggregates satisfying the requirements
laid down in clause 2504.2.2 of MoRTH
specifications to a thickness of not less
than 600 mm with smaller size towards
e-DSR Item the soil and bigger size towards the wall
16 Cum 2 11.000 0.600 4.510 59.532 2349.48 139869.243
No. 12.72 and provided over the entire surface
behind abutment, wing wall and return
wall to the full height compacted to a
firm condition as per drawing and
technical specifications etc. complete.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Pier
Footing 1 14.500 8.800 0.400 51.040
1 14.500 3.800 0.700 19.285
1 14.500 1.200 0.700 12.180
1 14.500 3.800 0.700 19.285
Total 261.870 7971.82 20,87,580.50
Providing and laying in situ / ready
mix M-20 plain cement concrete of trap
/granite/quartzite/ gneiss metal for
cast in citu piers, abutment, returns,
wings etc. including provision of "V"
shaped false joints to form suitable
panels on the faces to approve design
with compacting by vibrating and
curing complete, including
plywood/steel form work centering (
excluding dewatering by means of
pump) and including bailling out water
and curing finishing in CM 1:3 etc.
complete. as directed by engineer in
e- DSR charge basic rate shall be increased for
8 Item no. height above 5.00 m in followinh Cum
17.39 manners
(a) Height upto 5 M. (With Concrete
Mixer)With fine agreegates of
required specifications (Natural sand /
VSI sand finely washed etc )
i) Height up to 5 m, normal rate.
ii) Height 5 to 7.50 m, add 5 percent
extra over basic rate.
iii) Height 7.50 to 10 m, 7.50 percent
extra.
iv) Over 10 m Height, add 10 percent
extra for every 2.50m rise.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Super Structure
Super Structure @ 100 kg/Cum MT #### 0.100 17.820
Kerb @ 60 kg/Cum MT 8.47 0.060 0.508
Total 18.328 108934.43 19,96,545.88
Providing and laying weep holes of 100
e-DSR
mm diameter PVC pipes as per drawing
14 Item No. Each 161 0.550 88.550 424.00 37,545.20
for abutment returns, return walls etc.
17.37
Complete.
Back filling behind abutment, wing wall
e-DSR and return wall as per drawings and
15 Item No. technical specifications etc. complete. Cum 2 5.400 11.000 7.350 873.180 778.32 6,79,613.46
12.70 (by granular material)
2 12.000 24.000
1 12.000 12.000
2 12.000 24.000
4 9.275 37.100
Total 97.100 343.00 33305.3
Providing and filling joint sealing
e-DSR compound with coarse sand and 6%
19 Item No. bitumen by weight as per drawings and Meter 2 12.000 24.000 36.00 864.00
14.64 technical specifications etc.
complete.
Providing and laying of a strip seal
expansion joint catering to maximum
horizontal movement upto 70 mm to be
installed by the manufacturer / supplier
e-DSR to their authorized representative
20 Item No. ensuring compliance to the RM 3 12.000 36.000 12160.00 437760.0
14.68 manufacturers instruction for
installation as per approved drawings
and standard specifications etc.
complete.
Cost Estimate of RCC Slab Bridge
Span Arrangment of Reconstruction Structure 2 x 9.0 ( 12 .00 m wide)
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Diversion Road
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Abutment
Footing 2 4.700 3.600 0.300 10.152
2 4.700 1.600 0.500 3.760
2 4.700 0.800 0.500 3.760
2 4.700 1.200 0.500 2.820
Independent Retaining Wall
Footing 4 6.000 5.500 0.500 66.000
4 6.000 2.600 0.300 9.360
Cost Estimate of RCC Slab Bridge
Span Arrangment of Reconstruction Structure 8 x 7.0 ( 4 .70 m wide)
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
2 4.700 9.400
7 4.700 32.900
2 4.700 9.400
4 7.970 31.880
Total 83.580 343.00 28667.9
Providing and filling joint sealing
e-DSR compound with coarse sand and 6%
19 Item No. bitumen by weight as per drawings and Meter 2 4.700 9.400 36.00 338.40
14.64 technical specifications etc.
complete.
Cost Estimate of RCC Slab Bridge
Span Arrangment of Reconstruction Structure 8 x 7.0 ( 4 .70 m wide)
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Diversion Road
Clearing and grubbing road land
including uprooting rank vegetation
grass, bushes, shrubs, saplings and trees
girth up to 300 mm, removal of stumps
e- DSR of trees cut earlier and disposal of
31 Item no. unserviceable materials and stacking of Hect. 1 100.00 10.00 1000 9.00 9,000.00
2.09 serviceable material to be used or
auctioned up to a lead of 1000 metres
including removal and disposal of top
organic soil not exceeding 150 mm in
thickness.
Excavation for roadway in earth, soil of
all sorts, sand, gravel or soft murum
including dressing section to the
e- DSR required grade, camber and side slopes
32 Item no. and conveying the excavated materials Cum 1 50.00 12.80 0.60 384.00 73.00 28,032.00
2.11 with all lifts upto a lead of 50m. and
spreading for embankment or stacking
as directed.
Watering and compacting of
embankment formed of materials
e- DSR obtained from the road cutting within a
33 Item no. lead of 50 m, not less than 97 % of Cum 384.00 70% 268.8 71.00 19,084.80
2.23 standard Proctor density after laying
them in layers of 20 cm. to 30 cm. with
vibratory roller
Providing earth work in embankment
with approved materials obtained from
other sources upto lead of 50m.
including all lifts, laying in layers of
20cm. to 30cm. thickness breaking clods,
e- DSR dressing to the required lines, curves,
34 Item no. grades & section, watering and Cum
2.28 compaction with vibratory roller with
V-Sat attachment to achieve not less
than 97 % of standard proctor density
etc. complete ( Material obtained from
Other sources)
For Embankment 1 100.00 12.80 0.50 640.00
Less Qty of Item no. 32 -268.80
Total 371.20 706.68 2,62,319.62
Providing, laying and spreading soil on
a prepared sub grade, pulverizing,
adding the designed quantity of cement
to the spread soil, mixing in place with
e-DSR rotavator, grading with the motor
35 Item No. grader and compacting with the road Cum 1 100.00 12.80 0.50 640.00 905.68 5,79,635.20
2.36 roller at OMC to achieve the desired
unconfined compressive strength and to
form a layer of sub-base/base.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.
Sr. SOR
Item Unit Nos. Length Width Height Quantity Rate Amount
No. Item No.